Suddenly my phone's microSD card is not detected

I have a Nokia 6300 which i have been using for more than a year. Suddenly last week my phone stopped detecting the microSD card (128 mb) which came along with phone. I tried taking out & re-inserting but it didnt help. I have also tried accessing it through Nokia Browser through my laptop but that has also not helped... I tried inserting in another phone but there also it is not detecting.
Is it a virus attack? How can I make my phone detect the card?
PLzzzzzzzzzz help me out. I have some important pics that I would miss out......

It's certainly not a virus.
It sounds like your card has become damaged or corrupted.
Your only option for recovering data from this card is to use it in a card reader with a PC along with data recovery software.
You can find plenty of free recover software by searching google.
If the PC manages to read the card without any special software then it may be a hardware issue with the card reader in the phone.

Similar Messages

I have an iphone and i was sending a multimedia message and all of a sudden the phone turned off and will not turn on.We have been charging it for almost half an hour or more and it still hasnt turned on. How do we fix it?

I have an iphone and i was sending a multimedia message and all of a sudden the phone turned off and will not turn back on. We have been charging it for almost half an hour or more and it still hasn't turned on. How do we fix it?

Wine, were you charging over the USB Connection or AC Power? We've found in our organization that at times not enough power is generated over USB to recharge it in situations like this...I quote from the email of a fellow technician that i just received today...
I’ve had a couple of users up here bring their iPhones to me so dead that the phone was unresponsive, no matter what we did. One thing that many people do not realize is that the iPhone (iOS devices in general) have power management in them. The power management appears to be set up so that the device will not power on at all until the battery is at a certain minimum level. If the user will plug the device into the power adapter, not a USB port on a computer (laptops especially), and leave it for about an hour, maybe longer, the device will come back to life.
The reason I say they have to use the power adapter is because the USB port is not high enough power to bring the charge up fast enough for the battery to come back out of “hibernation”.
Each time I have had the users do the power adapter plug in, and leave it for a couple of hours, the devices have come back to life
Hope this helps

My sim card is not detected...

What can I do? I check it in other phone and it's OK. By my iPhone all the time said: Your sim card is not detected.

But I was done with my iPhone everything.
Have no idea what this means.
In your opinion it is a problem with hardware? Maybe.. But what I can do in this situation?
Copied from my previous post.
If OK in another cell phone and usable to place and receive calls, etc. with another phone, there is obviously a problem with your iPhone. This may be a hardware problem with the interior of the iPhone where the SIM card makes the connection with the iPhone, or it could be a software problem.
If no change after powering your iPhone off and on and/or after a reset, try restoring your iPhone with iTunes as a new iPhone or not from your iPhone's backup. If no change after this, your iPhone has a hardware problem.

Sim card was not detect after upgrade my iphone4s to ios 6.0.1

my sim card was not detected after i update to ios 6.0.1
i had ald try many time plug in n out my sim card it keep on show searching no service or no sim
i had reset my network setting n i reset all n now i cant activate my iphone

Connect your iPad to iTune (computer) and Check for Updates. Backup before you proceed with update.
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%201/e0f22e92de98ebae10e 3fd537c16619e.jpg

Sound card is not detected under Windows 8

Hi there,
I bought an Asus Xonar DGX PCIe soundcard. When inserted it is not detected by the system; it is like it doen not exist.
I have a new Dell Inspiron 660 pc with 3mHz I5 processor, 8Gb memory, 4 extension slots, one full lengthand 3 PCIe, Nvidia Gforce GT640 graphics card (in the full length extension slot). Its running Windows8. The Xonar is inserted in the 3rd slot as the
second is blocked by the vent of the Gforce card.
I loaded the latest driver form Asus and disabled the on-board soundcard in the "Bios" but to no avail.
The first card was returned to the distributor with those problems as they expected it to be defect. Now i got a new one and installed it has the same problem.
Can anybody help me with this one??
Regards Steffen

Hi,
Please try the following:
1. Check if the card can work on other Windows 8 computers.
2. Update chipset driver and BIOS.
As this is a hardware issue, it is also recommended that you contact Asus and Dell for help.
Thanks.
Nicholas Li
TechNet Community Support

PXI-8532 DNET card is not detected in MAX

Hi all,
I'm using NI PXI-1031(4 slot PXI chassis). I have the following cards in the respective slots
Slot 1= PXI-8106 Controller
Slot 2= PXI-6259 card(AI)
Slot 3= PXI-6509 card(DI,DO)
Slot 4= PXI-8532 Card(DNET)
In MAX(Measurement & Automation Explorer), I was expecting all the above cards(PXI 6259, 6509 & 8532) to be detected under Devices and Interfaces. But only the AI and DIO cards are detected in MAX under Remote Systems>>PXI>>Devices and Interfaces.
PXI-6259 (PXI1 Slot2)
PXI-6509 (PXI1 Slot3)
The device net card, PXI-8532 is not detected in MAX. Does MAX shows/detects the DNET card?
In MAX, I selected Tools menu>>NI-DNET>>RT Hardware Configurations. Then a window prompts for RT IP address. After entering the IP address, I pressed OK. A message appears that no device is found.
Can any one help me how to detect the DNET card in MAX and do the DNET port configuration?
DNET driver version - 1.6.4
Thanks,
Raja
Solved!
Go to Solution.

Dirk,
Thanks for the reply. After updating the new driver, I am able to detect the DNET card PXI-8532 in MAX
New driver - NI-Industrial Communications for DeviceNet 2.1
But Im not able to configure the Device Net port. In MAX, I selected the menu option Tools>>NI-DNET>>RT Hardware Configurations. Then a window prompts for RT IP address. After entering the IP address, a message appears that no device interface is found.
By default, the DNET0 port is configured for the card in MAX. So I tried to communicate from LabVIEW using DNET0 port.
After installing Devicenet 2.1, an additional function palette has been added for DNET in LabVIEW.
Old DNET function palette - Instrument IO>>DNET
New DNET function palette - Industrial Communications
My original application was written with old function palette VIs which corresponds to DNET 1.6.4 version. In the download link that you shared has a description about the driver compatibility. The description says still the DNET card PXI-8532 is compatible with NI-DNET 1.x LabVIEW VIs.
With the old DNET VIs, I tried to establish communication with DNET interface port "DNET0". But it shows error while opening the interface.
Error Code ="-1074388957" - The Interface is invalid or unknown. Solution: Verify that the interface is assigned to a specific port within the Devices and Interfaces branch of the Measurement and Automation Explorer (MAX).
With the new DNET VIs(DNET 2.1.0), Im able to open the DNET interface successfully. But my original application was written in Old DNET VIs (DNET 1.6.4).
1. Do you know why the DNET 1.6.4 LabVIEW VIs are not working with PXI-8532 DNET card?
2. Can you help me how to configure DNET port in MAX for PXI-8532 DNET card?
Thanks,
Raja
LV 2009, Windows XP

MOVED: Nvidia graphics card was not detected in your system

This topic has been moved to MSI Notebooks & Netbooks.
https://forum-en.msi.com/index.php?topic=178616.0

^^Gecko, I'm not bustin' on you, but you're wrong. Or, you are, but I doubt it, one of the lucky ones.
I've gotten 3.1 installed by running the setup .exe file from the DVD via Windows Explorer. Everything seems OK except the graphics/resolution. My NVIDIA card isn't recognized and my resolution options only go up to 1280 x 800.
The Window 7 Performance Information and Tools shows this:
"Graphics
Total available graphics memory Not detected
Dedicated graphics memory 0 MB
Dedicated system memory 0 MB
Shared system memory 0 MB
Display adapter driver version 6.1.7600.16385
Primary monitor resolution 1280x800
DirectX version DirectX 8 or earlier"
Apple, please, help us!
Message was edited by: K Dubb
Message was edited by: K Dubb

Z60m card reader not detecting cards

Hi,
I had my z60m formatted recently and since then the card reader does not detect cards. On searching online I found a ricoh card reader driver which claims to work for the z60m which I have now installed. Still no luck. The green light next to the card reader blinks when I put a card in which could mean the hardware works.
Hope someone can help me.
Thanks
Riaz

hi
drivers for card reader for z61m - win7 :
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
they are HP but working just fine (mass controller question mark in DM)

New airport extreme card is not detected

I brought a new airport extreme card and installed as instructed but my computer is not detecting it at all. Im new to using a Mac, so please can someone let me know what I'm doing wrong? If you need more info please ask.
emac Mac OS X (10.3.9)

this is definately the correct card...
How do you know? To identify which eMac you have, you can use KB 86325, eMac: How to locate the serial number and identify your model. Then you will be able to determine if you need the AirPort card or AirPort Extreme card.
What kind of keyboard are you using?
The command key probably has an Apple symbol.
Here are some other symbols for those keys:

Ethernet card was not detecting...

I am using Dell Laptop, I have a inbuild NIC card. It is working fine in my Windows OS. But it was not detecting in OEL 5.5
I have a ADSL Modem and want to connect to Internet in OEL 5.5
Is it possible to use WiFi in OEL 5.5 ???
Anyway, I want to use Internet on my OEL 5.5 laptop

Karumudi7 wrote:
So, you are preferring Ubuntu. I have Ubuntu 10.04 Desktop edition CD, can I go with this?
Are the things are same like the OEL? Most things, yes.
Becoz there is no root in Ubuntu directly and the command is also different $su -iThere is - simply the security model is a tad different as a desktop o/s does not have a sysadmin dude, whereas a sever o/s does have.
To access root on Ubuntu, simply use:
sudo su - root
Type your password when prompted.
Or install Open SSH Server and you can ssh (from other platforms too) into your desktop - including as root. E.g.
sudo apt-get install openssh-server
What abt bash_profile?The same. Bash is bash is bash - irrespective of the distro.
If the things are same as in the OEL for Oracle 10g manual Database Installation, I can prefer that.Well, there's very little that is "special" with an Oracle s/w installation. It is a bunch of popup windows with a next and cancel button - all you need to do is read the text and change the defaults if needed. Anybody can install Oracle software. And how often do you install Oracle s/w? Definitely not every second day.
The important bit is not the installation itself - but how you administer the database.
Finally, wat abt Kernel Parameters, Will the parameters are same for all Distros?Mostly. Cannot speak for all distros, but the ones I've worked with use the sysctl command to set kernel parameters. As distros are based on a specific Open Source/GPL Linux kernel, those kernel parameters are the same. sysctl uses the config file +/etc/sysctl.conf+ - so that will also be the same across distros.
A distro does not mean something radically different. Underneath it all, it is the same source code. The differences come with what that kernel ships. What drivers are bundled? What Window manager? What versions used (stable, experimental, etc). What software packages are included.
If you are going to use Ubuntu, then I suggest installing XE. It is free. It is great for experimenting. You can create database instances. You can destroy them. You can use rman for backup and recovery. You can write your own database create scripts. You can sudo as the oracle o/s user, manage and monitor and kill processes. Etc.

HBA Card is not detecting in m4000 server

Hi,
hba is not detecting in M 4000 server. Any one plz help me.
Thanks & Regards,
Venkata Siva

Hi.
You not write what type/vendor new HBA.
You not write what you do for detect new HBA and what means new HBA not detected.
I hope you create */reconfigure* before install new HBA or make boot -r
Regards.

Second s5 update has made wifi and data run simutaniously, being charged for data only way to turn off Data is to go to settings. I had same issue with my other phone. Recieved two replacement phones the SIM card did not work on replacements took phone ba

Wifi and Data running simultaneously. Data was being charged to my account even though I was on WIFI. No one can fix the issue. I have wasted 8 hours of my life and went and returned my phone and got a new one yet after the last update I now have WIFI and Data showing that they are running simultaneously. I have looked at numerous message boards and turned off Caller ID don't have Volte on my phone but do get an error with Visual Voice Mail. I don't want any of these services, you are not helping your customers Verizon or Samsung with forcing us to update. I tried not to update my NEW phone that I had to get from Costco because of this exact same stupid issue happen on my last one. But every time I said NO to update the next time I did anything on the phone the UPDATE would pop up again. I would say NO it would come back. I was doing a text and it came up and I hit update not wanting to and then my phone began updating on a low battery. I had to rush to put on charge and then my WIFI and Data came back on together with arrows on all going up and down. I HATE the lack of support I get from SAMSUNG and VERIZON... Verizon washes their hands and say these are not Updates even though these are the features we have on all our phones like Visual Voice Mail and Volte...

I did look at the Settings/Cellular to check the applications. This is one of the steps I did with the person from Verizon who was an "iPhone Specialist". And he didn't see anything unusual. And I can honestly tell you they have very minimal number of apps on their phones.
When I went to the Apple Store the first time with this problem, they had me update the phones iOS systems to see if this would correct the problem. They were each running older versions but different versions. One son had one update to do and the other had a couple of updates needed. So, the problem started before they were updated and they weren't even on the same update. And nothing changed after we did the updates.
I didn't reboot the router and modem, because I'm not having any other issues with my phone, my husband's phone, our iPad, xbox, PS3, or laptops. Would the wifi only affect their phones?

Why does my macbook pro's built-in card reader not detect my SD card?

I have a Macbook Pro 15-inch Retina (Late 2013) and it has a built-in card reader. My SD card was working perfectly with the reader some days back, however, now it has all of a sudden stopped working! The funny thing is that when I put the same SD card into an external card reader connected to the same macbook, it works perfectly. Also, strangely, my card reader still works perfectly well with another SD card I have.
So, both the card reader and the SD card appear to be working separately, but why are they not working together?

two things to try
1. Reset SMC data. Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
2. Do not push the card(s) all the way into the slot . back it out a fraction 1/16-1/8 inch until it appears in finder/desktop/etc...

PCMCIA Wlan card is not detected: Error 1058: service cannot be started

PLEASE HELP!
I am running WXP Pro for over 2 years and I have been connecting to the internet via a wireless pc card in my laptops PCMCIA slot with no problems. Suddenly last week it started to randomly disconnect and reconnect, and now it has gone off completely.
I bought a new WiFi card and still didn't work. I have checked the device manager and the PCMCIA cardbus driver is working fine as is every other device. The wireless card driver and some other network related drivers fail to start no matter what I try and how many times I try. I have tried another laptop and both my old card and the new one work fine.
All the device driver that I try to start have the error
"Error 1058: The service cannot be started, either because it is disabled or because it has no enabled devices associated with it."
The card driver is installed, just not starting, it's like the laptop cannot detect or see the card in the slot
Please help; I am having trouble finding anyone with the same problem after a week of searching the web.

Hi
This behavior can occur if the service is disabled or if the service is disabled for the hardware profile that you are currently using.
To enable the service do this:
1. Click Start, point to Programs, point to Administrative Tools, and then click Services.
2. Double-click the service that did not start.
3. Click the Log On tab.
4. Verify that the service has not been disabled for the hardware profile that you are using. If it has, click Enable.
5. Click the General tab. Verify that the service has not been disabled in the Startup Type box. If it has, click Automatic to have it start when you start the computer.
This was described here in the MS knowledge base article
http://support.microsoft.com/kb/241584

EHWIC Card is not detecting when we put in the router

Hello Guys,
Currently my router doesn't detects the ehwic card and its currently working on hwic.
I just need to confirm if ehwic card supports T series IOS .
as per the below Cisco document it support min IOS 15.1.M series & I'm using 154-1.T1
appreciate if somebody can quickly confirm the same
http://www.cisco.com/c/en/us/products/collateral/interfaces-modules/high-speed-wan-interface-cards/qa_c67-660125.html
http://www.cisco.com/c/en/us/td/docs/routers/access/interfaces/software/feature/guide/EHWIC_1_GE_SFP_CU_FM.html#wp1069000
please find my current IOS version & card type
Card is : EHWIC-1GE-SFP-CUV01
#Show version
Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.4(1)T1, REL
EASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Wed 12-Feb-14 04:27 by prod_rel_team
ROM: System Bootstrap, Version 15.0(1r)M16, RELEASE SOFTWARE (fc1)
Router uptime is 2 weeks, 3 days, 11 hours, 54 minutes
System returned to ROM by power-on
System image file is "flash0:c1900-universalk9-mz.SPA.154-1.T1.bin"
Last reload type: Normal Reload
Last reload reason: power-on
Cisco CISCO1941/K9 (revision 1.0) with 487424K/36864K bytes of memory.
2 FastEthernet interfaces
2 Gigabit Ethernet interfaces
1 terminal line
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity disabled.
255K bytes of non-volatile configuration memory.
250880K bytes of ATA System CompactFlash 0 (Read/Write)

Got the things from one test router having different image .please find below.,
#sho version
Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.0(1)M1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Wed 02-Dec-09 14:14 by prod_rel_team
ROM: System Bootstrap, Version 15.0(1r)M3, RELEASE SOFTWARE (fc1)
uptime is 50 minutes
System returned to ROM by power-on
System image file is "flash0:c1900-universalk9-mz.SPA.150-1.M1.bin"
    ##### sh diag
Slot 0:
C1941 Mother board 2GE, integrated VPN and 2W Port adapter, 2 ports
Port adapter is analyzed
Port adapter insertion time 00:50:40 ago
EEPROM contents at hardware discovery:
PCB Serial Number        :
Hardware Revision        : 1.0
Part Number              :
Top Assy. Part Number    : 800-30798-01
Board Revision           : B0
Deviation Number         : 0
Fab Version              : 03
Product (FRU) Number     : CISCO1941/K9
Version Identifier       : V01
CLEI Code                :
Processor type           : C8
Chassis Serial Number    :
Chassis MAC Address      :
MAC Address block size   : 96
Manufacturing Test Data : 00 00 00 00 00 00 00 00
EEPROM format version 4
EEPROM contents (hex):
WIC Slot 0:
-       Unknown WAN daughter card
        WIC module not supported/disabled in this slot
        PCB Serial Number        :
      Hardware Revision        : 1.0
       Part Number              :
       Board Revision           : A1
Top Assy. Part Number    : 800-34350-01
Deviation Number         : 0
Fab Version              : 05
RMA Test History         : 00
RMA Number               : 0-0-0-0
RMA History              : 00
Product (FRU) Number     : EHWIC-1GE-SFP-CU
Version Identifier       : V01
CLEI Code                :
Unknown Field (type 00D4): CC
Asset Identifier         : A0
EEPROM format version 4
EEPROM contents (hex):
===
show inventory
NAME: "CISCO1941/K9 chassis", DESCR: "CISCO1941/K9 chassis"
PID: CISCO1941/K9      , VID: V01 , SN: ######

Suddenly my phone's microSD card is not detected

Similar Messages

Maybe you are looking for