Suddenly my project window has no scroll bars, and if I return to the project library, select my project and click edit, another project LIBRARY appears partially covering the project window.  Help.

In the middle of making a movie, the scroll bars vanished in the project window and I could no longer navigate at all.  If I went to the project library and selected the project, another image of the project library slid in and entered onto my screen.  after repeated attempts to open the project in various ways, I have it now, but there are holes in the project window (blank background) and no scroll bars.  It does not respond to anything.
can someone help?

I'm adding more information:
in Finder, my iMovie folders are all visible and accessible.  When I click on a clip from iMovie Events folder, Quicktime opens and plays the clip.  ALL my video is not missing - it just isn't showing up in the Event Library!
This happened all of a sudden, while I was working on iMovie project (on both computers).
All my Projects are intact, and play when I open them. 

Similar Messages

  • Mac MIni has no scroll bar in Mail function with Maverick

    Out of the box mac mini has no scroll bar in Mail funtion

    have you looked:
    Re: Can't Scroll In Mail after Mavericks update

  • How do I add a form which has a scroll bar in PDF?

    Hi
    I would like a form to be added into PDF, however, the form is too long to be put in one page. There are also other stuff in the right hand side, so I wish the form has a scroll bar for the user to drag and browse, just like a web page scroll bar. Is it possible that Acrobat 3D8 support such function?
    Thanks!!!!

    Hi Kentyang,
    This is a 3D specific forum - maybe place this request in the Acro Script forum at http://www.adobeforums.com/cgi-bin/webx?14@@.3bb55d70
    Cheers
    Gazzz

  • Fix Chrome? CP opens in a small window with a scroll bar

    I have CP presentations that previously worked and they have started to open funny. They work in IE, but not in Chrome. The presentation opens in a full screen, but with a scroll bar and the right and only showing about 1/4 of the screen. See attached screen shot. Any ideas?

    So it could be 2 things:
    The HTML scaling that is causing your project to expand, and then add a scrollbar as the frame you are viewing your content in is expanding to suit the screen size. When you publish try unchecking the "Scalable HTML Content" checkbox from the publish settings.
    It could be the projects Zoom settings, if it is a flash module. Just right click and ensure its not zoomed.
    The thing that has me stumped is why it is only loading 1/4 of the screen.

  • HTML Page has no scroll bar

    I made my template size of 1024 x 768, when I open this page
    in my browser, and shrink the browser window so its not full size
    there are no scroll bars on the page to allow scrolling to see the
    all the info on the page.
    what am I not doing correctly ?

    Dominic,
    No, you don't have to open them in any application to be able to scroll. Better yet, the ability to preview them at their native size (instead of the tiny one-size-for-all) is now at your finger-tips.
    It's called Quicklook, and no, you don't need to be in Coverflow view. Simply select the movie, then press your spacebar
    Scott

  • How do I add a form which has a scroll bar?

    Hi there:
    I got trouble when I try to insert an Excel form into PDF. The excel form is quite long,I would like to make a scroll bar for it so that I don't have to roll all way down to the bottom of the page. How can I achieve this function in LiveCycle Designer or Acrobat?
    Thanks a lot!!

    From Tools>Advanced edit, select either the Combo box or the List box. One provides a drop down list that can be scanned and the other provides a scroll list. I suspect that Designer is similar, but I use Acroforms. For Designer, you would need to check that forum unless you have folks here that use it.

  • Scroll Bar not functioning in Grid View with All Photographs selected

    LR 4.3 on Windows 7
    I can scroll through a bunch of photos while in grid view with the right side slider when I am looking at a folder with 15,000 images or less, but when I click the All Photographs, there is no little slider button. The slider tray is visible, but no button to drag. The catalog has 180,000 images now. Any suggestions would be appreciated.
    I tried using a text search within my All Photographs which brought up 71,000 images. The slider showed up fine with that many images.
    M. Jackson

    Okay, I will answer my own question in case anyone else sees the problem.
    When I am viewing my large catalog with only three thumbnails across in LR, I lose the little button to slide up and down. When I change Grid View to show four or more thumbnails, the button reappears. I'd suggest this is a bug needing fixing.

  • Ok.  I'm stumped.  The right side scroll bar on my pages documents disappears sometimes.  I don't know how to restore that function.  If I widen the page field, it will appear for a short time.  Very annoying if I am just using trackpad.  What to do?

    Ok.  I'm stumped.  The right side scrool bar on Pages documents disappears sometimes.  I have no idea why. Nor do I know how to get it back.  I've tried closing and reopening and restarting my macbook pro.  If I widen the right side, I get the scroll bar for just a few seconds and then if fades away.  I can't find anything it the help menus that fits it.

    geek,
    The scroll bar is consistent with the Full Screen approach in trying to maximize the working area of your screen. The scroll bar fades to make room for data. So, use your 2-fingered scroll or arrow keys for short moves. If you have a long way to scroll, the scroll bar will activate any time you scroll with the trackpad or the arrow keys and you can grab it and pull it to your desired position in the document.
    One man's innovative is another man's irritant, I suppose.
    Jerry

  • Develop Module - Navigator Window has a horizonal bar through it (Lr 4.2)

    sorry if this has been posted by other - but I've been getting a horizonal bar running through the center of my Navigator Window in the Develop Module in 4.2
    Exiting Lr and re-opening will fix it, until it happens again. Its not a consistent, persistent issue, but occurs a fair bit

    http://forums.adobe.com/community/search.jspa?peopleEnabled=true&userID=&spotlight=false&c ontainerType=14&container=3316&rankBy=date&q=0xc0000005

  • Safari 5.1 for windows has jerky scrolling, downgrading to 5.0.5 fixes the bug

    fully updated XP with default AMD drivers
    can anyone else reproduce this?

    Same problem on windows 7 64-bit i3-based machine.

  • Purchased used ipad on ebay and it has not been released from icloud and seller doesn't know how to find it. Says he got from another person. How do you unlock it? HELP!

    Purchased a used ipad on ebay, seller says it is locked in icloud and not released. He said he got it from a friend, but didn't know the id or password to get ot released from icloud. I asked if it was stolen of which I have not heard from him yet. Does anyone know how to get it reset so it can be used? HELP please!!

    You cannot, and Apple won't unlock it for you. Ask eBay for a refund.
    (111289)

  • Scroll Bar on Window

    Hi. I have a form where the canvas/window is long. As such the Window has a scroll bar that the user can slide to move the canvas up and down within the window.
    Are there any programmatic controls for this? 1) After the user commits their changes I'd like the window to scroll back up to the very top. 2) I'd like the user to be able to use the Page Up/Down keys to move this scroll bar - is this possible?
    Any help would be greatly appreciated.

    Hi. This is the code in my Key-Commit trigger:
    -- SAVE AND CLEAR THE FORM
    go_item('rcpt_mpi.mailpiece');
    clear_form(do_commit);     
    DO_TRIGGERS.ENTQRY;               What do you mean when you say the item at the top of the form should not be visible? Do you mean that the 'visible' property of the item should be set to 'false'?
    Right now the item at the top of my form is the first field the user interacts with ('rcpt_mpi.mailpiece'). When the Window scroll bar is at the bottom then 'rcpt_mpi.mailpiece' is not visible simply because it has simply scrolled off the screen. When I save (F10) the data is saved, but the scroll position doesn't change. And when I scroll up manually I find the cursor is sitting in the 'rcpt_mpi.mailpiece' item. So the problem seems to be that the focus isn't changing to 'rcpt_mpi.mailpiece' even after the go_item.
    Any thoughts?

  • Dual Monitor Issue: 2nd Display too large...can't adjust...web pages provide no scroll bars

    I have two (2) HP S2031 LCD flat screen monitors.  They functioned perfectly with my old 32-bit machine (now gone).  I have just purchased a new 64-bit Windows 7 machine.  There are no error messages, but if I open a web page on the right (2nd) monitor, it does not display correctly.  It's as if it is a little too large.  I've tried adjusting the image using the Nividia software and using the monitor adjustments without improvement.  It is difficult getting out of that window because no scroll bars (vertical or horizontal) present themselves.  I am connecting through an iogear MiniView KVM switch to DVi-D sockets (with the four pins).  
    Is it a 64-bit driver issue?   I think not, because display #1 looks fine.  Could it be an iogear KVM firmware issue?
    I dug out the HP driver disks that came with my monitors and installed them.  After I did that, I realized these were a 32-bit installation.  Now the monitor resolution won't go back to the higher, recommended level.  I don't see the software installation on the "add/remove programs" listing.  I'd like to change that.
    BUT THE REAL ISSUE is that I need BOTH monitors to be able to display proper aspect independently.  Remember, I've been through both the Nividia adjustments menu and the built-in monitor adjustments menu and found nothing that worked so far.
    Please help if you can.  This is for my trading business and I need it desperately.

    When requesting assistance, please provide the brand and model name and/or product number of the computer in question. Without this information, it may be difficult or impossible to resolve your issue.
    Have you swapped the two monitors to see if the problem follows the monitor or remains at the same location??? Try that first... if the problem follows the monitor, perform a hard reset by unpluging the monitor from power then holding the power button for 30 seconds. If the problem stays in the same location, you know both monitors are good and I would suspect the KVM isn't passing the "EDID" data to the computer. Removing the KVM should will tell you if this is the case.
    Please post back with your troubleshooting results.
    Please send KUDOs
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Creating a site without scroll bar and dependent of window size

    Hi,
    I want to create a site that appears in the browser window without a scrolling bar, so all content is shown in that window and you don't have to scroll down (unless window size is ridicrously small).
    Of course, there are contents that will not fit in the window like long texts but then I want this block of text to have its own scrolling bar so the only thing that scrolls is the text and not the other elements.
    at http://www.artofwalls.com/rosannawalls you can see my attempts.
    In the home page you can see how the background picture always adapts to the size and aspect of the browser window and how the menu keeps its position related to the lower left corner of the window. But if you click in "Biografia" (SEE BELOW) you can see a text that is too long so you have to scroll the screen to read it. What I want is this text appear inside the white transparent box and the height of this box end near the bottom of the window. To read the full text a scroll bar should appear inside this box and this scroll bar should scroll only the text inside the box, just like in the text box I'm writing this post now.
    EDIT: DUE TO A BUG IN MUSE I HAVE ALREADY REPORTED LONG AGO, YOU CAN'T SEE THE PAGE BIOGRAFÍA BECAUSE IT IS EXPORTED AS biografía.html AND THE SERVER DOESN'T RECOGNIZE THE INTERNATIONAL CHARACTER (THE SOLUTION PROPOSED BY ADOBE WAS TO UPLOAD THE SITE TO BUSINESS CATALYST BECAUSE THEIR SERVER HAS NO PROBLEM WITH INTERNATIONAL CHARACTERS, BUT ALMOST ANY OTHER SERVER IN THE WORLD DO)
    SO, TO SEE THE PAGE I'M TALKING ABOUT YOU HAVE TO GO TO http://www.artofwalls.com/rosannawalls/biograf%eda.html
    Another strange side effect is in this page the menu has disappeared completely. If you scroll down all the page you will see the menu is not there.
    Another thing I would like is to adapt the size of the white transparent box to the size of the browser window.
    Here: http://www.margomusic.com/ you can see a page I made in Flash where you can see what I mean with the scrolling text inside the box (just let the intro pass and you will see the text)
    And here: http://www.anemaecore.net is another page that adapts perfectly to the size of the browser window, but also made in Flash and also this site changes the size of the text instead of the size of the text container.
    Any help will be greatly appreciated

    Thanks for the replies. I guess I did not ask the question correctly so I will try to explain it better.
    What if I want to use the FTP client inside of Dreamweaver to just connect to my server. I can connect to the FTP (see image) but how can I drag a folder from my desktop into the server using Dreamweaver?
    I have downloaded a folder and I need to add it to my blog which is only on my server. I do not have a Dreamweaver site. Surely Dreamweaver isn't that archaic that you can't upload a file or folder to a server without having to create a site first. It was so much easier in GoLive.

  • Horizontal Scroll bar in messgae window is a pain, can text be wrapped?

    I am new to Thunderbird but so far i am enjoying it compared to Entourage.
    I have one question regarding the horizontal scroll bar i see on some messages... Why on earth is this here? I really do not understand the logic in scrolling right to read an email, surely this text should wrap into the window space available rather than having to keep moving the scroll bar along?
    I have had a play around with the preferences but to no avail, can anyone point me in the right direction as this is becoming frustrating : ( :cry:
    Perhaps someone can develop this as an add on?
    Many thanks for reading this post
    Cheers Tony
    == This happened ==
    Every time Firefox opened
    == Imediately

    Thunderbird support is over here, too.
    [http://www.mozillamessaging.com/en-US/support/]
    or here:
    http://forums.mozillazine.org/viewforum.php?f=39

Maybe you are looking for

  • I am no longer able to email to a group

    I have been trying for 3 days to send e-mail messages to a group from the contacts I set up in my address book.  I have been able to do this for years, and all of a sudden, it does not work.  I always get the same message: Sending the message content

  • Win 8.1 and J4680c All-in-One: Can't reinstall the printer/drivers

    I have followed all of the instructions to re-set up my wireless network, uninstall the printer/drivers, and reinstall the printer/drivers (including renaming all of the .dat files as .old), but once it gets to the install wizard, at the Checking Sys

  • Is it possible to receive answers in a completed form like a pdf rather than a database?

    This may be a rather odd question, but a client would need to receive answers in a format that can be saved as a record. For example if the user were to fill in the form on paper there would be a hard copy of the questions and their answers. Would th

  • A little question about compiling my own kernel

    Hii, How can I know please, wich moudle is loaded in my current kernel and being used? for example, if I have now the RAID xxxx , and I don't use it, so when compiling my own Kernel, I don't need it. How can I know wich ones arn't needed?

  • Abap cleint proxy with Multi mapping

    Hi folks, In this senario i am using client proxy to jdbc. but my client proxy is generating input file - <n0:MT_xxx_SAP xmlns:n0="http://xxxxx/bbb/HR/002/SAP_to_yyyy" xmlns:prx="urn:sap.com:proxy:RD1::700:2008/01/11"> - <row>   <BUKRS>This is a stri