Suddenly - no service available at home?

I've been in the same house for over 18 years, and have always had Verizon coverage. Not the 4G servicee they tell me I should be right on the edge of, but never the less, decent coverage. We could always make and receive calls and texts, and use the internet services. And we do so daily/hourly/as needed.
Now today, it is like a dead zone -- Hello, can you hear me now? NO! Nada! Nothing. Pull into my driveway and it's like driving into a concrete bunker (actually it starts about a 1/2 miles from my neighborhood). The bars all disappear and it even says "no service" at times. Sometimes we see a half bar of service. Not enough to make or receive a call... Worked fine a day or so ago. Had to drive a ways to get coverage and call Verizon. They said nothing has been reported and it will take up to 7 days to get this checked out. Are you kidding me? This is ridiculous.We have thtree phones in the house, they worked fine at work today, and they worked fine when we drove back into town to make phone calls.
Has anyone had this happen to them? We had a bad storm last night, it's almost like the storm took out a tower, but wouldn't they know about that?

Try power cycling your modem and router worked for me

Similar Messages

I work in Barstow and have had NO SERVICE AVAILABLE on my Ellipsis Jetpack since 1/29/2015. I have no problems at home over in Victorville. Anyone capable of fixing that?

I have an Ellipsis Jetpack and have no problems at all using it at home over in Victorville. I did not have an issue in Barstow until 1/29 when it mysteriously came up with NO SERVICE AVAILABLE. I will sporadically get a signal but no internet service. That signal typically lasts less than one minute.

Service problems need to be reported directly to Verizon support. Give them a call and share the details on what you have observed.
One other step you could try before contacting VZW would be to get a 2nd VZW device and test in Barstow. If multiple devices are having a problem then its likely an issue with the local towers. If its only your Jetpack then the Jetpack would need servicing or resets to get back on track.

WHY CAN I NOT GET DSL OR UVERSE SERVICE AT MY HOME.

I would like to know why i cannot get either internet service at my home. its a new home i understand. but you have a UVERSE fiber cable running under my front yard. you have DSL wiring under my front yard. i have a box in my front yard. and yet you dont want to turn on the service for me. i have had ATT at numerous homes in the past and the service and customer service have always been exemplary, however this time no one will give me an answer other than its not available. to me not available means we dont have the infrastructure to support it. that is not the case is i know the lines are in place and others in the area have your service. if i had other options i would not be so frustrated, however i refuse to install an ugly satelite dish on my new home so that leaves me no where to go. i would like a supervisor or engineer to call me and let me know a specific reason i cannot have the service that is in my front yard.
bruce w[edited for privacy – please do not post personal information]

Hello, !
Thanks for posting. I'm sorry to hear that our internet service does not appear to be available at your address. We would be happy to investigate further and perhaps discuss some alternatives, so please click here to send us a private message with your contact information, the best time to reach you, and a brief summary of the issue.
You can expect a reply within two business days, so keep an eye on the little blue envelope icon in the top right corner of your screen. In the meantime, feel free to message me with any other questions or concerns.
-Mariana

W-4 tax wothholding service available in ESS.

Hi All
What are the prequisite config steps we need to carry out in back end R/3 for makig W-4 tax wothholding service available in ESS. I am not finding ay thing in the 'service specific settings ' of IMG in ESS for this area.
Is there any confg required to be carried out in application area also ?
Can some body please suggest. We are on ECC 5.0
Thanks
Srinivas

Hi Sharada
Thanks for your reply.
As regards the home page design I think we are going with SAP stanadard and all other links in the Benefits & paymants area like salary staement , total comp statement, employment verification, W-2 reprint etc. work fine.
There is a link for W-4 as well but when we get on to the link we do not get the W-4 opened up. You had mentioned that we need to create a iView and page and add to the ESS role. I thought SAP provides standard iView for this functionality. Or is it that for ECC 5.0 SAP's iView is not available. Can you please throw some more light on this ?
Thanks
Srinivas

Word 2013 cannot translate - no services available

I'm trying to translate an entire document in microsoft word through:
review -> translate -> translate document
which brings up a screen that asks me for mini translator to select a language. i can select spanish here - but nothing happens..
under it says "translate from" and "translate to" and both have a drop down menu
the only thing that appears is "no services available"
normally i should be able to select english and spanish..
any ideas?
thank you!

First, I did exactly what you suggested and noticed the feature was already installed, i.e. "Run from My Computer."
Second, I tried setting the feature to "not available" (uninstall), and after a computer restart I re-enabled it.
Third, I tried uninstalling the complete Office suite, restarting the computer , and then re-installing the software with "Run all from My Computer."
Fourth, I downloaded and re-installed all the language proofing 64-bit executables for French, Spanish, English (US), Chinese (PRC), and Japanese from the Microsoft Office 2013 website.
All of these methods did not resolve the issue. I would like to add that this was never an issue with Office 2010 32-bit--which was completely uninstalled prior to the 2013 installation. However, I do now recall my 2013 64-bit version for the mini translator
worked prior to a later Windows Update some time ago. I suppose an update may be responsible for the issue.
Can anyone confirm my hunch? Did your mini translator for 2013 64-bit run before and then suddenly stopped functioning?

Error on my IPad 2. When I'm trying to access in utilities to configure the email, this close suddenly and send me to home page

Error on my IPad 2. When I'm trying to access in utilities to configure the email, this close suddenly and send me to home page.

Not sure about Utilities on your iPad. Do you mean the Settings app?
First thing to try is a reboot of your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appear. Let go of the buttons and let the iPad restart. See if that fixes your problem.

Why is my iPad suddenly not opening the Yahoo home page? I get a message saying Safari can not open the page due to too many redirects. This started yesterday. I shut my iPad down and still no luck.

Why is my iPad suddenly not opening the Yahoo home page? I get a message saying Safari can not open the page due to too many redirects. This started yesterday, and I have already tried shutting off my iPad.

Ipad2 plus ipad air all of a sudden instantly goes back to home screen.doesnt matter what app i am using just when it decides to do it it does.apple tech has no answer or fix for me does anybody have any idea what is wrong

ipad2 plus ipad air all of a sudden instantly goes back to home screen.doesnt matter what app i am using just when it decides to do it it does.apple tech has no answer or fix for me does anybody have any idea what is wrong

First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
Could also be not enough free space for the iPad to operate efficiently. With iOS 7 it is recommended that you have 15-20% of the storage space on the device free. For a 16 GB device that is 2.4-3.2 GB free. For a 32 GB device that is 4.8-6.4 GB free. For a 64 GB device that is 9.6-12.8 GB free.
If neither of these suggestions helps, Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

How to use a standard service available in SOAP to ABAP proxy scenario?

Hello Experts,
My scenario is SOAP to ABAP proxy wherein I have to send Sales Order from Third party TC to SAP.
Third Party->SOAP Adapter->PI 7.1->ABAP Proxy->ECC.
I have seen a standard service available at the following URL.
http://esworkplace.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?packageid=DEE98D07DF9FA9F1B3C7001A64D3F462&id=13A904EA0E8711DC5A11000F20FCB6A9.
Can I use the above web service for my current scenario? If yes, please explain how?
Thanks & Regards
Nidhi

Third Party--->SOAP Adapter--->PI 7.1--->ABAP Proxy--->ECC
I am actually looking for using standard webservice that has been provided by SAP in ESWorKSPACE available on sdn.
The WS that you mentioned is inbound and hence wont suit your requirement!
The reverse flow may however be possible.
Create Sales Order_V2
synchronous inbound service operation
Regards,
Abhishek.

How to make a service available at boot.

Can someone tell me how to make a service available at boot time via smf ? The question is for a generic service ( network/telnet for example ) and for a site one.
Is it enough to enable it via svcadm ?
Thanks.

yeah all you need to do is
svcadm enable /network/telnet
this will enable the service then and next time when you boot the system
(or i.e. svcadm disable apache2 if you want to disable the httpd)
have you tried man on svcadm?
Sharif

Testing Forms Services availability with Hardware Load Balancer

I have posted a question about load balancing to a group of application services running Forms Services here on the Forms forum but have had no reply:
Forms Services availability checking for BIGIP Load Balancer
My basic questions are:
a) What do people recommend for load balancing Forms ... least connection, round robin ... ?
b) Do people use http://server:port/forms/frmservlet?ifcmd=status or have some of you used something else?
My reason for the question is we had a Forms Services failure that was not detected by the ifcmd servlet as the HTTP side of things was still working. This meant that the BIGIP load balancer sent everything to the failed server as it had the least connections. So basically no-one could logon.
I've raised an SR with Oracle but they recommend the standard URL above. Has anyone else had a problem like this and if so were you able to fix it?
Regards,
Philippe

Well SR followed up and it looks like the only course of action is to use the standard HTTP check: http://server:port/forms/frmservlet?ifcmd=status ...
... unless that is you want to do some serious customisation. Oracle don't support any other form of checking.
I'm guessing from the lack of responses to this thread that this hasn't been an issue for anybody else ... ???
Any thoughts/suggestions really welcome as we go into production in 4 weeks.
a) What do people recommend for load balancing Forms ... least connection, round robin ... ?
b) Do people use http://server:port/forms/frmservlet?ifcmd=status or have some of you used something else?
Thanks,
Philippe

Forms Services availability checking for BIGIP Load Balancer

We are load balancing across a number of 10.1.2.2 Forms servers using a BIGIP load balancer. Currently our load balancing is done based on which server has the "least connections" to the BIGIP. So far we have been using the following test URL to allow BIGIP to check the availability of the Forms Services on each server.
http://server:port/forms/frmservlet?ifcmd=status
This works well however it only checks through to the HTTP level within Forms Services. We encountered a problem when the Forms Services failed to work on a particular server however the above URL showed that everything was OK. The effect of this was that all new users attempting to login were directed to the failed server as this server had the "least number of connections".
After raising an SR with Oracle they advised that the forking of runtime processes had probably failed and this was not detectable by the load balancer with the above URL. So they have recommended a number of options for checking the status of the Forms Services. These are:
a) http://server:port/forms/frmservlet
This loads the default Form and therefore by definition tests the forking of runtime processes. However BIGIP is unable to automatically process the information to distinguish whether the service is up or down. Oracle recommended that if using this method we would need to customise BIGIP to handle the various FRM-xxxx error codes.
b) http://server:port/forms/frmservlet?userid=scott/tiger@YOURDB&form=yourtestform.
fmx
Even more thorough would be to actual log on to the database using a test form as above.
My question is does anyone out there have experience in checking Forms Services availability using these last two methods as I'm not sure how to customize the load balancer so that it can handle the output of these URLs. Also when using the original URL is it normal to load balance using a "least connections" method or do people out there use a different algorithm.
Thanks for any help/advise that you can give.
Regards,
Philippe

Well SR followed up and it looks like the only course of action is to use the standard HTTP check: http://server:port/forms/frmservlet?ifcmd=status ...
... unless that is you want to do some serious customisation. Oracle don't support any other form of checking.
I'm guessing from the lack of responses to this thread that this hasn't been an issue for anybody else ... ???
Any thoughts/suggestions really welcome as we go into production in 4 weeks.
a) What do people recommend for load balancing Forms ... least connection, round robin ... ?
b) Do people use http://server:port/forms/frmservlet?ifcmd=status or have some of you used something else?
Thanks,
Philippe

What is the transaction code for see the Web Services available in SAP

Hi
I came to know that SAP has provided its own webservices... I need some information on that... If any one has documentation on that can u please send it to me... My ID is <b>[email protected]</b>.
What is the trasaction code for see the web services available in SAP.... Can any one help.. Please its urgent
Best Regards
Ravi Shankar B
Message was edited by:
RaviShankar B

Hi,
you can find Web Services (Enterprise Services) in the Enterprise Services Workplace (ES Workplace). The ES Workplace allows you to explore, test, and use enterprise services to make enterprise SOA tangible. Here, you will find all of the currently productized enterprise services by SAP.
Best Regards,
Boris Mueller
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/developerareas/esa/esapreview">ES Workplace at SDN</a>
<a href="http://esapreview.sap.com:82/socoview(bD1kZSZjPTgwMCZkPW1pbg==)/flddisplay.asp">ES Workplace</a>

I got an iphone 4ios 5.0.1 from one of my freind from uk he gifted when insert sim its showing no service available,i don no whether it is locked or not?

i got an iphone 4 from one of my freind from uk he gifted me.when insert sim its showing no service available,i don no whether it is locked or not?but i can see the applications only thing is that the network is not showing.please suggest ?

According to Apple (http://support.apple.com/kb/ht1937) all UK carriers sell their iPhones locked, even though they also all offer unlocking. So, as mentioned, contact your friend and ask them did they get it unlocked? If not, which carrier did they get it from so you can contact that carrier and request an unlock.

C3-00 chat : "no service available" + OVI mail won...

Hello all,
Bought a C3-00 goldenwhite 3 weeks ago, though never succeeded to connect to all the OVI applications (OVI chat, OVI mail + communities), which are the two main features that are the reason why i bought this phone
- chosen connection mode : WIFI only (because prepaid card)
- device system version 7.20 (upgraded last week, thought it would resolve the OVI chat/mail issue) : update causes me all audio files downladed from ovi store to be "corrupted file / license expired" whereas it was free content, deleting files and downloading again doensn't bring improvement to the issue
- restored factory settings but no improvement on OVI chat/mail application issues
- called my operator: unlocked access to OVI mail "settings" part but wonce account is created, the "connection" wheels runs for a while but nothing happens / still have the "no services available" problem in ovi chat while communities keeps on "updating profile" but nothing happens as well soI don't have proper access to my profile (because "updating profile still runs)
precision : i have no problem to connect to OVI store or any other website through the navigator, issue of "no service available" (chat) and neverending connection (ovi mail) that prevent access to mail is only with those 2 application + communities
eBuddy works fine
are there any settings to update?
thank you a lot for your help

@Nnova031: hello Well yes, youtube can work if You will make UDP configuration with some ports redirected on router, but this is no slution for me, because i have many wireless connections (few computers, wifi printer, other mobile phones/pda devices, and server with is got all ports redirected on it, rest of devices are using NAT).
The key to make everything work as it should is Nokia. They must fix using TCP/IP over WiFI (with NAT) by their apps. Without them they are just not useful, because all people bought this phones thinking they will use wifi and those really nice apps. Those apps are working well on GPRS/EGPRS for many reasons (like using some proxies by operators in configuration, by using external IP by device so all ports can be opened and waiting for data, while it is sooo insecure like hell, etc.).
I think it should be priority one for all Nokia developers to fix that, because they are selling product, that do not have options. that are reason 90% of all their customers did buy it. It is like buying car, that cannot drive without towing car.
Don't say you want to help - just do it! Happy user of Nokias: 6150 SAT (still work), 6021 (used as backup, still work), 5220 XpressMusic (Drown, screaming for Contact Service), C3-00 (my current phone).

Suddenly - no service available at home?

Similar Messages

Maybe you are looking for