Suddenly not able to print...  Help Please

I have a MacBook Pro running OS X 10.4.11. I have always printed to an HP Photosmart C5200 series printer without any problems. Now suddenly, I can not print from any application. The printer works from my iMac that runs Leopard. The only changes would have been the automatic updates that run. I uninstalled the printer and then reinstalled. Then I uninstalled and installed a new printer. Still doesn't print. The printer doesn't even "pop" in the dock. When I try to print from Entourage, I get an error that says "an error occured while printing. Not enought memory." When printing from Word I get an error that says "Word cannot print due to a problem with the current printer. Make sure you have a printer selected in Print Center. You may need to print again or adjust your printer settings." I don't believe the issue is with memory or the printer.
Any ideas?

DLFDNFDNS wrote:
I have a MacBook Pro running OS X 10.4.11... The only changes would have been the automatic updates that run.
Are those Mac OS updates, Microsoft updates or what?
When I try to print from Entourage, I get an error that says "an error occured while printing. Not enought memory." When printing from Word I get an error that says "Word cannot print due to a problem with the current printer.
Can you print with a NON-microsoft application?
Consider booting the MB Pro from the Tiger Install disc holding the "c" key down. Select language, then from the Utilities menu, select Disk Utility. In Disk Utility, in the left pane, click on your hard drive and in the right pane, click on the First Aid tab. Near the bottom, click Repair Disk. If it finds any errors, it will try to repair them and then re-run the test again. After it re-tests without errors, click the Repair Permissions button. Reboot computer and launch Disk Utility in the Utilities folder and run Repair Permission from there.
Try printing.
HTH

Similar Messages

  • HT1338 when I click on a website where there is a pdf to view, I am all of a sudden not able to view.  Please adivse

    when I click on a website where there is a pdf to view, I am all of a sudden not able to view.  Please adivse

    <sub>Linked from https://support.mozilla.org/en-US/questions/976863</sub>
    Hi Anita,
    Create a new profile as a test to check if your current profile is causing the problems.
    See "Creating a profile":
    *https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
    If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • Please help ,GR not able to Print

    Hi Gurus ,
    I would really appriciate if you could help me to fix this problem , User is not able to print GR document .
    Thanks in advance.

    Hi Greetings
    In addition to the condition records being maintained for the GR message output type, the following setting is required in the user profile.
    Transaction
    SU3               -- > Parameters -->
    Parameter ID "NRD" and parameter value "X".
    Gobinathan G

  • I have an account in Apple Astor was not able to access it, please help me in this matter

    I have an account in Apple Astor was not able to access it, please help me in this matter
    <E-mail Edited by Host>

    What to do if your iPhone will not turn on

  • PC crashed. CD-Rom not working. Downloaded CS5 Web Premium but not able to install. Please Help. Help.

    PC crashed. CD-Rom not working. Downloaded CS5 Web Premium but not able to install. Please Help. Help.

    I had problem with my CD-rom, it not able to open. On top of that recently my PC crashed.
    I managed to install other software, but not able to install CS5 Web Premium.
    Ive downloaded the electronic version via Adobe Downloads, but not able install it.

  • HT201263 While updating Iphone 4 to latest on phone itself it got frozed and now apple sign is coming up after every 10-15 secs , even itunes is not able to detect phone, please help

    While updating Iphone 4 to latest on phone itself it got frozed and now apple sign is coming up after every 10-15 secs , even itunes is not able to detect phone, please help

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    But... if the Device has been Modified... this will Not necessarily work.

  • Not able to print double sided or into the mailbox of our "Canon Image Press C1" anymore

    Maybe someone can help me.
    Yesterday I noticed, that I am not able to print double sided or into the mailbox of our "Canon Image Press C1" anymore (InDesign Version 6.0.4).
    At the end of january I printed double sided the last time and it worked.
    Right now, I can choose "double print", but the system does not keep it. I tried with different documents already and it didn't work, so it can't be just that one file. Since everything works out of other programs like Adobe Acrobat or MS Word, it can not be printer bug; it's pretty much my impression that it must be a InDesign bug.
    So if somebody has any idea .... please help :-(
    Thank you in advance
    red witch

    Sorry that I forgot about the operating system, but I am new so you may forgive me about that ...
    I am working with a PC. Last week I was working in a document and suddenly the side window did not show the sides anymore. Our IT department took a file from my collegues PC and copied it to my PC, after this the sides where shown again. Since my colleque has got the same basic problem, I think something went wrong on the installation. I am not the expert with this installation stuff.
    Bye
    red witch

  • About 2 weeks ago, not able to print all pages in a .pdf document using internet explorer 11?

    About 2 weeks ago, not able to print all pages in a .pdf document stored in a folder (I'm using Windows 7)? 
    It only prints 1 page then my Brother MFC-J4510DW Printer says "Please put another piece of paper in the feed slot"....the problem is the print setting is set to "manual mode" in Windows 7 rather than "general setting".  If you try to change the setting to "general", it will not accept the change.

    Hi.
    I did try using the printParams feature and it worked, but since I need to be able to print sets of non-consecutive pages,  I end up having to bring up the print dialogue multiple times and have the user set watermarks each time. 
    I decided to just create a new pdf in a temp directory containing the selected pages and open this document in a new window.  This works well and allows them to use the print button on the window to print, bringing up the print dialogue just once.  However, since I need to open the document in a way that shows the print button, I am using OpenInWindowEx, with AV_DOC_VIEW, and the option PDUseBookmarks or PDUseThumbs, rather than PDUseNone.  This displays a toolbar which also includes icons for creating a new pdf, deleting pages, etc.  I do not really want to include these icons on the toolbar.  Is there a way to remove unwanted icons from the toolbar, or make them invisible?
    Hope this makes sense.  Thanks for your help.
    Mary

  • Not able to print purchase order..

    Dear All,
    I am not able to print one import  purchase order.
    I have checked everything and also able to print another import Purchase orders..but particular this PO print out is not coming.
    I have deleted message and again created the same..also condition record is maintained...
    Not able to see print preview also (Not generating)
    What could be the reason?
    Please help..
    Naren

    Hi Naren,
    try the note :111062.
    [https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=111062]
    Please check the setting mentioned in the note and revert.
    Thanks,
    Hrishi

  • Not able to Print Invoice thru Crystal Integration

    Hi All,
    Could anybody help me on the issue given below.
    One of our client Issue while printing from crystal Integration in SAP Business One. I can able to view the crystal report through Crystal Integration but i am unable to print the document.No Error is getting displayed .If i am printing from PLD it's working fine .After exporting to PDF from crytal integration i can able to Print but not able to print directly from the crystal Integration.
    Thanks,
    Vishwanath

    Vishwanath,
    Please post your question in this forum ...
    Reporting and Printing
    Eddy

  • Not able to print multiple copies

    Hi All,
    We are not able to print multiple copies on network printer having device type HP LaserJet2430 even though we are giving no. of copies as 3 or 4 while creating spool request.
    Please help me to solve this issue.
    OS - windows.
    SAP 4.7 EE
    Thanks in Advance,
    Basis Admin

    Hi,
    Give one test print from OS Level mostly, this will be problem in printer configuration
    Regards,
    Ramesh.B

  • User not able to print from SAP

    Hi guys,
                 User is not able to print from SAP. The printer is directly connected to his PC. It is not a network printer. The user is able to print at OS level perfectly. IN SP01, it shows in green and the print job has been completed successfully. I can see the output request. Its all fine in SAP. I am not sure why it is not printing from SAP. Please help ?
    Thanks

    hi venkata,
    did you already defined your printer on SAP Server using tcode SPAD ?
    What kind of printing you're using ?
    My suggest for simplest one is create new output devices.
    Type tcode SPAD
    Give simple name
    Choose SAPWIN for device type (if you're using WIndows clients)
    On Access Method tab
    Choose Host Spool Access Method F : Front end Printing or G :
    For Host Printer fill with __DEFAULT (remember double underscore)
    save and test it.
    ardhian
    http://sapbasis.wordpress.com

  • Not Able to Print in PDF Format Apex

    we are not able to print in pdf format with using a template, if we use default layout we are getting a pdf output,
    Can any one please help me on this issue....
    Thanks
    Malleswar

    Hello Malleswar,
    we are not able to print in pdf format with using a template, if we use default layout we are getting a pdf output,If your scenario with APEX Listener is generally capable of producing a PDF when using a working template, than the error is very likely to be in your template, not in APEX Listener.
    If that's the case, you'll probably find more people with experiences on how to build custom xsl-templates into your APEX application in the APEX forum: {forum:id=137}.
    If you decide to post there (or even if you think it's better to continue here), please provide information on your APEX and APEX Listener version and whether you see some error information in APEX Listeners log when trying your own template or not. If you don't see anything there right now, enabling debug mode will make the log more verbose and probably provide a hint on which part of your template can't be processed properly by the FOP built into APEX Listener.
    -Udo

  • Not able to Print the report

    <p>Hello All,</p><p>I am not able to print the report. When i click on the icon a blank form opens up. Is there something i need to do to see the form with some details.</p><p>Thanks</p><p>ram</p><p>&#160;</p>

    <p>Hi Ram,    </p><p>Can you give me some more details around your issue? How exactly are you building the viewer? Are you using the JSP Page Wizard that comes with Crystal Reports for Eclipse? If so, then can you tell me what application server you are deploying to?  All of these pieces may help narrow down the issue.  </p><p>Regards,<br />Sean Johnson (CR4E Product Manager) <br /><br /> <a href="http://www.eclipseplugincentral.com/Web_Links-index-req-ratelink-lid-639.html">Rate this plugin @ Eclipse Plugin Central</a>          </p>

  • Not able to print in duplex

    On this windows 7 PC, Since I upgraded from Acrobate Reader 8 to Adober 9 and reader10, I am not able to print in duplex mode. I works fine from another computer Windows XP using Adobe Reader 6.0 using the same shared and WiFi printers.
    Looking at the document file property in the advance tab, in the print dialog preset window, I am not able to change the duplex mode from grayed "Simplex" to Duplex.
    How do I fix this problem?
    See screen print picture

    Hi,
    The HP Deskjet 2520 does not support automatic print duplexing and therefore any checkbox will not apply for such.
    You may perform manual duplexng on Mac OS using the Pages to Print option as following:
    From the file used to print click the File menu and select Print.
    NOTE: The Print window might be minimized. Press on Show Details to show any available print option.
    From the main drop does menu select Paper Handaling.
    The main menu will usually list the program name (e.g. TextEdit).
    Will appear as Copies & Pages within Microsoft Office applications.
    Set the Pages to Print option as Odd Only, as well set the Page Order as Automatic and click on Print.
    After the odd-numbered pages have printed, reload the paper with the printed side facing up and repeat the process above by setting the Pages to Print as Even Only this time.
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

Maybe you are looking for