Suddenly on DellXPS15z laptop reading email Firefox or IE Zoom goes from 100% serially down to an unreadable 35%. Size can increased with Ctrl and +/= keys. But then it repeats the same downsizing routine.
'''bold text'''
Hi Alex,
Take a look at this document, and select the appropriate scenario and try the troubleshooting steps. Please let me know if it helps you resolve the problem.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓
Similar Messages
-
How to create a file which i can attach to an email using the same print routine i use for printing
Hi all,
In my current code i print a document.
What I would like to do is attach this file - possibly as a pdf - to an email using the same print routine ( with some additional code obviously)
Did some research on the web and can't find a solution to this.
Any help would be appreciated.
Regards
Jan KonijnenbergWhat I would like to do is attach this file - possibly as a pdf - to an email using the same print routine ( with some additional code obviously)
You need to install a printer that 'prints' to a PDF file. Then send your document to that printer and attach the file. There are several available, free and commercial.
http://www.dopdf.com/
There are other formats which may be suitable.
http://www.howtogeek.com/150891/how-to-print-to-pdf-in-windows-4-tips-and-tricks/ -
I have tried everything but I can't connect my iphone to my laptop. It says that apple mobile device failed to be installed. I have read everything on the internet and did everything but still am facing the same problem. Can you please help me.
Again without stating the trouble shooting steps you have taken, its hard to direct you with any information.
Try a different port on the computer.
Does the iphone beep when u plug it up. ?
Plug iphone into computer and give it 3 to 4 minutes to see if it connects and is running slow.,
Delete the apple mobile device from your computer.
Upgrade itunes to newest version.
Is you USB cord defective ?
Any USB 3.0 on your system ? .
Delete or Disable any antivirus program on your computer ?
I will tell u the problem is your computer not the phone.
We could do this for hours. -
I am using Adobe Reader X on a laptop with Windows Vista OS and Adobe Reader XI on an older laptop with Windows XP OS. While filling out the same form on each computer, I have found that I can save info on the older laptop, but not on the newer one. This is a big problem. I must be able to save on the newer computer. Do I need to buy a new computer with a more up-to-date OS? Please help.
Adobe Reader X can only save reader-enabled forms. Adobe Reader XI can save all forms.
-
My macbook pro's screen display has suddenly gone into a strange colour setting where everything appears in a kind of infrared colour palette an I can;t seem to change it back. It's the same for all icon and websites, does anyone know how to restore?
Wow! I think I had this same issue just last night.
I was cleaning my macbook pro retina on the outside. Then I opened it up and was wiping dust off the monitor and I can't pinpoint exactly when, but the colors changed suddenly. It looked super strange, it was like green halo's and it looked worse when looking at it at an angle. Of course I took no pictures!!! I was freaking out that my 2 grand laptop was busted and I somehow removed a protective film or something.
But I digress... The image looked very green and spacey, it was almost a neat effect. After about 5 minutes it started to look a little more digital though. There were straight lines of this halo effect on the edges and top. After about 10 minutes it turned into a predominate issue with the blacks on screen. I could open a web browser and it was unnoticable on a white background. After about 15 minutes, you could only barely see the green cloud effect if you looked at the monitor from an extreme angle. After about 20 minutes, it was completely back to normal, I almost feel paranoid like I see a halo or something strange. But I believe that might be all in my head now.
So yerp, lemme know what you guys figure out. -
I delete some emails ,there are moved to trash . I delete them from trash folder too and they still appear in a folder called 'all messages". I repeat the same actions and after a while they appear again!what should i do to delete them permanently??
If you are using Apple's Mail app 6.5 is the latest version irrespective of what a previous poster says. It does sound though that you are using a gmail account online via a web browser. Please confirm and fill in missing information.
-
i was backing up my iPhone and importing photos onto iPhoto at the same time , then suddenly it says no more space available (i had 48GB before i do this and now i have 18GB) i can't find the back up or the photo anywhere , how can i delete them ? i dont need the pictures or the back ups , i want to delete them but they are not there
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown asBackups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Reboot and it should go away.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders, sorted by size with the largest at the top. It may take a few minutes for ODS to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with ODS, quit it and also quit Terminal. -
I can connect with my banking websites but the login page will not come up. This is a recent occurrence and I have done virus scans and have also recently done a clean instal of Windows 7. The problem persists. I can connect to any other website with no problems. When I close FF it appears to close and Task manager shows as not running but it will not reopen. If I attempt to uninstall I am told that FF is running and needs to be closed. I have to reboot to get to close and be able to reopen.
I can connect to the bank sites with IE. However I really don't like IE.
I am using Win7 Professional on a Sony notebook VGN SZ55I don't have an answer, but I experienced the same problems trying to set up an airport express to route traffic to my stereo.
Apple Extreme router, iMac and laptop all worked just fine for months, upon installing Airport Express (step by step, according to instructions), all **** broke loose. Airport Utility was unable to see my Airport Extreme router, after hours of rebooting computer, cable modem, router, and finally a hard reset of the Airport Extreme router, it is finally recognized by Airport Utility again.
Recreated network, iMac connects to the internet just fine, laptop (Macbook Air) connects to the network just fine, but will not connect to the internet. Network diagnostics does not help, it gets to the "do you have a router? If so, reboot" stage, and never seems to see the router.
Any suggestions? -
HT1660 how can I use one single library for all users on the same laptop?
how can I use one single library for all users on the same laptop?
You are most of the way there. Each user having access to hard drive is the key. If users are limited in file privileges this is harder.
Any files you add to your library and any files she adds to her library are available to the other. Just not automatically. Each user must add the files to their own library using the add file or add folder option from menu bar.
What I have done is set library location to a location outside of My Documents\My Music. On my network storage I have a folder names s:\itunes. Both accounts iTunes are set to use this location for the library. -
I am getting the same message when I try to log in thru www.comcast.net on Safari, the Comcast Xfinity app and adding Comcast to my email accounts. I've also turned the phone on and off with no good results. My husband had the same problem and finally opened a Gmail account and had his Comcast email forwarded there. Any ideas would be appreciated.
Have you tried adding your comcast account using the built in IOS mail app.
If you're using the Comcast Xfinity app, then look at their support site or ask the app developer. -
I have two accounts and for both accounts I use the same email. I cannot verify my email on my main account because of this. Help? Can I just cancel my other account to avoid confusion? I am totally stuck now.
By the sounds of it you have linked Email Accounts, if so this means that you will both recieve the majority of the same Emails, and if you do and you read them on your account (which is linked with your husbands) then they will appear to read on the both of them because they are linked. With the majority of Email providers these days they're Emails are (simplified) in the cloud you could say, meaning that if you read or delete shared Emails then it will do the same on both accounts rather than just the yours.
I hope all that made sense, sorry that I couldn't be of anymore assistance.. If you havent already try googling your problem - you may find some answers on there -
While using my Iphone 5, all of a sudden black and white stripes where on the screen. I have tryed to turn the phone off and on again, but there are only the stripes. I can't use it, and nothing happens when I push the buttons. Can someone help me?
Try resetting your phone, hold the home and sleep/wake button down until the apple symbol comes up, then release. If that doesnt work, you may have damaged your phone and need to take it to an apple genius bar.
-
I have a serious contacts redundancy problem.
First I have multiple email account formats,e.g., 2011 MacOutlook, 2008 Entourage, 2007 Window Outlook, iPhone Exchange and these are all connected to the same account. The problem is I had up to 15 contacts for the same person.
I deleted the Entourage contacts as that seemed to be the program that was causing the problems. When I synced this morning, now all my contacts are gone from every where.
How can I restore to my last back? If I restore, it will ask to restore to the back that was just made… which has no contacts?
Help would be greatly appreciated !!I have a serious contacts redundancy problem.
First I have multiple email account formats,e.g., 2011 MacOutlook, 2008 Entourage, 2007 Window Outlook, iPhone Exchange and these are all connected to the same account. The problem is I had up to 15 contacts for the same person.
I deleted the Entourage contacts as that seemed to be the program that was causing the problems. When I synced this morning, now all my contacts are gone from every where.
How can I restore to my last back? If I restore, it will ask to restore to the back that was just made… which has no contacts?
Help would be greatly appreciated !! -
I just updated my Firefox browser to Firefox 8. I am a college student and practice with HTML and CSS for class assignments. The fonts in all my html documents are being overwritten online by your script typeface. I did not have this issue in the older version. I use an iMAC running OS10.6.8. How do I resolve this issue?
Starting with this, you have errors in your CSS code.
body {
margin-top: 0px;
margin-right: 0px;
margin-bottom: 0px;
margin-left: 0px;
color: 151515;
font-family: "Gill Sans", "Gill Sans MT", "Myriad Pro", "DejaVu Sans Condensed", Helvetica, Arial, sans-serif;
background-color: EFF5F8;
body {
margin:0;
color: #151515;
font-family: "Gill Sans", "Gill Sans MT", "Myriad Pro", "DejaVu Sans Condensed", Helvetica, Arial, sans-serif;
background-color: #EFF5F8;
font-size: 100%;
Related links:
Windows Chrome, why do my fonts look so bad? - Lee Green
css3 - Bad font rendering Chrome - Stack Overflow
Nancy O. -
Can't send Notes through email and it used to work. The same problem of sending picture from iPhone message. Did the reset twice but still not working
Try a reset:
Hold the Sleep and Home button down for about 10 second until you see the Apple logo.
Maybe you are looking for
-
I removed the ASK tool bars from my computer and since then I keep being told the cookies is either enabled or disabled. I refreshed Firefox and that solved nothing it just erased somethings that I setup on my desktop. I'm not dump but I'm not that w
-
How can I save a complete set of bookmarks at once?
Having searched for ERP/CRM info, I have found several interesting sited offering valuable information. Each of these sites has been opened in a separate screen. By doing so, I collected a series of tabs, each of them connected to a specific website.
-
Get only the filename not the full path of the file.
hi to all.. how can i get only the filename of the file not the full path and to be placed on a textinput.? example: when i'browse the file and select sample.txt "C:\Users\user\Desktop\folders\sample.txt" this will be inputted on the textinput. howev
-
Bridge cs5 will not recognize cr2 files [mod edit: from the Canon 1DX]
I just re-installed Photoshop CS5 to a new computer, but now I see that Bridge cannot preview CR2 raw files from my camera. Do I need a special plugin for this? Bridge worked fine on my old computer, but I can't remember what I did to see the preview
-
SecUpd2009-003Intel on MacBook Pro 10.4.11 - will load only 99% and stop.
I have tried at least 10 times to do the latest Security Update (SecUpd2009-003Intel) on my MacBook Pro. It flew through with no problem on my Mac Mini, but keeps stopping at 99% writing on my MacBook Pro. I have run Disk Utilities, I have run DiskWa