Suddenly, one day, all the type in my gmail messages was reduced in size--now need magnifying glass to read it! Help please.

All info stated in question. About the third time I've asked this question with no help.

Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages

Similar Messages

  • I have hp laptop dv9009us one day all the USB ports and webcam camera stopped working

    I have hp laptop dv9009us one day all the USB ports and webcam camera stopped working, I had windows XP and tried all solutions posted on online forums didn’t work, I upgraded to windows 7 and still not working, please note that the USB is detected in device manger and it says working properly but he webcam is not detected at all, also when I connect any device to USB it gives it power and I even can charge my cell phone but it doesn’t detect any device. Is there any genius out there that can help me?
    Also after I installed windows 7 I went o system information----software environment--- system drivers, and I found all USB drivers stopped by the way this was the case in windows XP as well
    usbccgp            Microsoft USB Generic Parent Driver   c:\windows\system32\drivers\usbccgp.sys         Kernel Driver   No            Manual Stopped           OK      Normal No       No
    usbcir   eHome Infrared Receiver (USBCIR)    c:\windows\system32\drivers\usbcir.sys Kernel Driver   No       Manual            Stopped           OK      Normal No       No
    usbehci Microsoft USB 2.0 Enhanced Host Controller Miniport Driver  c:\windows\system32\drivers\usbehci.sys            Kernel Driver   No       Manual Stopped           OK      Normal No       No
    usbfilter            AMD USB Filter Driver           c:\windows\system32\drivers\usbfilter.sys          Kernel Driver   No            Manual Stopped           OK      Normal No       No
    usbfltr   Razer Copperhead Driver         c:\windows\system32\drivers\copperhd.sys       Kernel Driver   No       Manual            Stopped           OK      Ignore  No       No
    usbhub Microsoft USB Standard Hub Driver    c:\windows\system32\drivers\usbhub.sys           Kernel Driver   No            Manual Stopped           OK      Normal No       No
    usbohci Microsoft USB Open Host Controller Miniport Driver  c:\windows\system32\drivers\usbohci.sys          Kernel Driver   No       Manual Stopped           OK      Normal No       No
    usbprint            Microsoft USB PRINTER Class           c:\windows\system32\drivers\usbprint.sys          Kernel Driver   No            Manual Stopped           OK      Normal No       No
    usbstor USB Mass Storage Driver        c:\windows\system32\drivers\usbstor.sys           Kernel Driver   No       Manual            Stopped           OK      Normal No       No
    usbuhci Microsoft USB Universal Host Controller Miniport Driver         c:\windows\system32\drivers\usbuhci.sys            Kernel Driver   No       Manual Stopped           OK      Normal No       No
    uwbusb            UWB Bus Control USB-Miniport Driver          c:\windows\system32\drivers\usbuwbmini.sys    Kernel Driver   No       Manual Stopped           OK      Normal No       No

    Did you ever get this resolved? I am having the same problem and have tried just about everything for my dv9000.

  • I deleted an e-mail account, as I changed e-mail, now all the archive folders associated with that account are gone!! Can I find them somewhere? Help Please!!!

    I am running Windows 7 and Thunderbird 26.6.0 I guess I should have made new archive folders under my new e-mail account and transferred everything into them before i deleted the old account, but I didn't know all the archive folders were going to disappear. I know nothing ever actually goes totally away, but I have no idea how to find it. If anyone can help, with relatively simple instructions, geared toward a semi-computer iliterate, I would really appreciate it. Thanks, Len

    http://kb.mozillazine.org/Recovering_deleted_mail_accounts

  • I am trying to install Itunes again but it wont let me. So i was uninstalling all the apple and itunes programs to start over, i have everything uninstalled exept Apple Software Update. HELP PLEASE

    When i try to uninstall Apple software update it brings up a message saying "There is a problem with this Windows installer package.  A program requirement for this install to complete could not be run. Contact your support personnel or package vendor." I believe i have Windows VISTA. Yes i know its old but i have not had the money or time to update.
    I just want itunes installed properly so i can use it for when i have my new phone. please please help i have tried everything it seems like !

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • How to reactivate my old apple ID that has a security issues?   I can't remember the password of my yahoo that was used to create that apple ID...  any help please?

    how to reactivate an old apple ID that has some security issues?   I can't acces the yahoo that was used to create that account because it was already recycled by yahoo.
    So when I restore my iPad 2, it is asking me for my old apple ID that was no longer working.....
    ANY HELP PLEASE

    Hi marcpople,
    If you have had an Apple ID disabled due to a security issue, you may find the following articles helpful:
    Apple ID: 'This Apple ID has been disabled for security reasons' alert appears
    http://support.apple.com/kb/ts2446
    Apple ID: If you forget your password
    http://support.apple.com/kb/ht5787
    Regards,
    - Brenden

  • I have an iphone4, and suddenly one day my factime app does not work anymore!! How do I get it to work again, Please?

    I am using an iphone4. Suddenly one day my factime app does not work anymore!! How do I get it to work again, Could someone please me?

    Try a reset or restart of the device. If it still does not appear on any of the home screens and cannot be found in a spotlight search, restore the device.

  • TS1365 My Macbook Pro 17" 2.44ghz all of a sudden one day decided to not boot up. When the power button is pressed the sleep light in the front on the latch release turns on and there is a small running sound but it never boots up and the screen never lig

    My Macbook Pro 17" 2.44ghz all of a sudden one day decided to not boot up. When the power button is pressed the sleep light in the front on the latch release turns on and there is a small running sound but it never boots up and the screen never lights up. Anyone else have this problem? Any ideas?
    I'd love to repair it but not if it'll cost 500 bucks or more to replace the logicboard.
    I appreciate any help
    Michael

    Lao Bo,
    yes, you can locate and copy a file from your HD to a USB key using UNIX commands. If you know the exact name of the file which you’re trying to locate, try this:
    find / -iname filename -print
    This command will search your entire internal disk for the particular filename. If you know that it’s within a particular user account, then you can save search time with this variation:
    find /Users/username -iname filename -print
    Either variation of this command will print all files found which have the given filename. Presuming that you’re able to identify the correct file, you can copy it to a USB key using the command
    cp -p filename_returned_by_find /Volumes/USB_volume
    If you’re not sure which volume name your USB key has, this command will show you what the possibilities are:
    ls /Volumes
    Please let me know if you have any trouble with these commands.

  • My ipod touch shows up under devices, and it always used to sync right but all of a sudden one day it started saying "You're ipod could not be synced because the sync session failed to start" and now it's not syncing anymore. How do I fix this?

    My ipod touch shows up under devices, and it always used to sync right but all of a sudden one day it started saying "You're ipod could not be synced because the sync session failed to start" and now it's not syncing anymore. How do I fix this?

    See if this previous discussion helps.
    Sync Session Failed to Start iTouch iOS5: Apple Support Communities

  • Was listening to music downloaded on iTunes.  All of the sudden one song on the album is not authorized?

    Was listening to music downloaded on iTunes.  All of the sudden one song on the album is not authorized?  I put in my Apple ID and it said this computer is already authorized.  Yet, when I tried to listen again, the same message popped up. Help!

    Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser. Bookmarks, history, addons will not be deleted unless you check to do so on uninstall.
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    Please report back to see if this helped you!

  • IPhoto: I was downloading photos from my iPhone every day during my holidays and suddenly one day: the following file could not be imported unrecognized format. And it's still same iPhone 4S and same format JPEG

    iPhoto: I was downloading photos from my iPhone every day during my holidays and suddenly one day: the following file could not be imported unrecognized format. And it's still same iPhone 4S and same format JPEG

    What version of iPhoto?
    As a Test:
    Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?
    Post back with the result.

  • Add one day to the current date

    Hi all,
    A stupid question...
    How can I add one day to the current date in a select. I want something similar to add one month to current date, but with days:
    something like:
    select TO_CHAR (ADD_MONTHS (SYSDATE, -1), 'DD-MM-YYYY')
    from dual
    Thanks

    select sysdate+1 "add one day" from dual;

  • What are all the types of Function module?

    Hi,
    What are all the types of Function module.
    Pls reply me.

    Hi,
    Function modules are one element. There are no types. However sometimes an RFC enabled function module is referred to as RFC Function module, but really it is just a function module. Also BAPIs are function modules, but are usually referred to as just BAPI as opposed to BAPI Function module.
    There is no different function module types , but calling the function module will be different.
    check this function calls syntax
    1. Calls a function module:
    - CALL FUNCTION func.
    2. Call a function module in a different mode (asynchronous Remote Function Call):
    - CALL FUNCTION func STARTING NEW TASK taskname.
    3. Call a function module in the update task:
    - CALL FUNCTION func IN UPDATE TASK.
    4. Call a function module in a remote system (Remote Function Call, RFC ):
    - CALL FUNCTION func DESTINATION dest.
    5. Asynchronous call to a function module with transactional processing (transactional Remote Function Call):
    - CALL FUNCTION func IN BACKGROUND TASK.
    qRFC with output queue
    6. Call a function module that can be activated in the context of enhancements:
    - CALL CUSTOMER-FUNCTION func.
    plz go through the below links
    http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
    Thanks,
    Reward If Helpful.

  • When downing an app on 3gs phone it says invalid address . worked one day not the next

    When trying to download apps on 3gs phone it says invalid address . It worked one day not the next day . Any help would be greatly appreciated. Thanks

    Hi Roger,
    Welcome to the Apple Dicsussion Pages.
    The Alcatel Speedtouch 585 proabably has version 5 firmware on there. I see form your post you know what the problem is.
    This can be the problem.
    Earlier modes in the 500 series had Firmware versions 3 and 4 which meant you could telnet into them form the Terminal Application and Unbind SIP from port 5060.
    This is what is causing the problem.
    The symptoms are a starnge pattern of succss and failure.
    A small group you can contact all the time
    An equally small group of now and then success
    And a large group of Buddies that you can never get AV chats with.
    ibosie who posts here says he has been in caontact with Alcatel and that they are working on a Firmware update to get round this.
    At this stage another modem would be the way to go. (the 510 and the 580 can be Unbound)
    Ralph

  • I have a 1st gen ipad. Want to play Candy Crush. Installed app from app store. I hit play now, I see the board then the pad goes back to the start screen (the one with all the apps displayed). Do I need additional apps to run? Thanks.

    I have a 1st generation iPad. Want to play Candy Crush Saga. Installed app from Apple Store. When I tap on the app, I wait a long time while it reads "loading" then I hit "play", I see the board then the ipad goes back to the ipad start screen (the one with all the apps displayed). Is there some additional program I need to play this type of game. I know that space is not an issue as I have very little stored. Thanks.
    Just found my answer. Worked perfectly. Instructions very clear.

    try uninstalling the app and reinstalling it. u shouldnt need to install anything else but the app itself to get it running. if that doesnt work then update ur software and see if that works.

  • Identifying all the types that implements a particular type using roslyn syntax tree.

    I have a method that takes the syntax tree of a .cs file as an argument.This method has to find all the types that inherits or implements a  particular type e.g. finds occurrences of all instances of statements "SqlConn
    c = new SqlConn()" because it implements IDisposable. I am using Roslyn API.

    I had a system recently containing seven sequence files, approx 20 subsequences in each, and around 10-20 steps in each sub-sequence. Every step (except for the NI non-code module types) was an instance of a step type.
    Each one of these steps had an Edit sub-step and a code module called through the code module adapter.
    In order to make these into "wrapped up" step types it was decided to move the code module to a Post-Step substep (as also done in the NI-IVI step types) - so that developers cannot fiddle with the code prototype or module.
    In order to do this I had to open all 7 of the sequence files, make the changes and then ensure that "Apply changes in this dialog to a loaded instances" was checked. This seems to sort of work, but some steps started causing Error 17502 (System Error) when you configure them (call the Edit substep). Over the course of the past few months I have had to effectively check every instance of a type to see if it works (deleting the step and replacing it when it doesnt). Other strange things happened like some of the step type instances now have the "None" (adapter) icon associated with them - but both still work.
    The idea of creating a type-def of a step type is a good one, but frustrating that it doesnt seem to fully work. Why should the sequence file also store a version of the step-type - which is what is effectively causing this problem - why not make it so that if you dont have the step types installed in the type palette - TOUGH! Message Edited by RichM on 03-15-2005 06:55 AM

Maybe you are looking for