Suddenly today, my iPhone won't send pictures to certain people...has worked fine until today.

Suddenly today, my iPhone won't send pictures to certain people...has worked fine until today.  Sends fine to some but not to others.  What's up?

Like any electronic item, it sometimes gets inexplicably balled up. The reset is no different than rebooting a computer that is acting hinky. If you don't have to do it often, then it is not anythign to worry about. (I know - not the kind of tech talk you were probably expecting, but the words selected are about as scientific as you can get concerning this type of weirdness....)
Cheers,
GB

Similar Messages

  • Firefox will not load up; has worked fine until today

    firefox will not load up; has worked fine until today. I am using Google chrome to communicate this message, so everything else is OK

    Some things you can try (if you haven't already done so) include:
    Go to System Preferences>iCloud and confirm that Documents & Data is checked
    If you're running Mavericks, go to System Preferences>iCloud, click Options next to Documents & Data and confirm that Pages is checked.
    Go to System Preferences>iCloud, uncheck Documents & Data, choose Delete from Mac (they will still be in iCloud), restart your Mac then go back and check Documents & Data again.
    Go to System Preferences>iCloud, click Sign Out, choose Delete at all of the prompts (your data will still be in iCloud), restart your Mac, then sign back in.
    Reset the iCloud Documents & Data service: http://support.apple.com/kb/HT5824.

  • Hi, I am wondering why my iphone won't send pictures through messages, I have MMS on and I have tried sending it with 3G on aswell and still doesn't work. Someone please help me :)

    Hi, I am wondering why my iphone won't send pictures through messages, I have MMS on and I have tried sending it with 3G on aswell and still doesn't work. Someone please help me :)

    Hey lozza567,
    Thanks for the question. I understand that you are experiencing issues sending MMS messages. The following resource may provide a solution:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Issues with sending and receiving MMS
    You will need these to send and receive MMS:
    - An iPhone 3G or later.
    - iOS 3.1 or later.
    - A cellular data connection. MMS isn't available if you are using only Wi-Fi.
    - A domestic MMS plan from your cellular provider. You may need an international messaging plan to send MMS to an international contact. Contact your carrier for more information.
    - A roaming MMS when using a cellular provider's network different from your billing cellular provider's network. Learn more about roaming and contact your carrier for more information.
    To resolve issues with sending and receiving MMS, follow these steps first
    1. Go to Settings and turn airplane mode off.
    2. Go to Settings > Messages and turn MMS Messaging on.
    3. Go to Settings > Cellular and turn Cellular Data on.
    4. Go to Settings > Cellular and turn Data Roaming on if you are roaming on a cellular provider network different from your billing provider's network.
    5. Verify that you have a cellular data connection in the status bar at the top left of your iPhone.
    6. Go to Settings and turn Wi-Fi off. Open Safari and navigate to www.apple.com to verify that you have a data connection. Turn Wi-Fi back on to continue using Wi-Fi for other features. If your cellular data connection isn't available, follow these steps.
    7. Verify that you can send and receive SMS. If you are unable to send and receive SMS, see the "Issues with sending and receiving SMS" section, above.
    8. MMS may not be available while on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn more about which network your phone supports.
    9. Restart your iPhone.
    10. Tap Settings > General > Reset > Reset Network Settings on your iPhone.
    11. Reseat your SIM card.
    If you are still unable to send or receive MMS, follow these steps
    1. Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
    2. Go to Settings > Messages and turn on group messaging if you are sending a group message.
    3. Make sure that you are using the area code with the contact's phone number. When sending messages internationally, you also need the contact's international code.
    4. Verify a "Pay as you go" MMS plan has enough available balance. Contact your carrier if unsure of your MMS plan or available balance.
    5. If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
    6. If the issue occurs with a specific contact or contacts, delete and re-create the contact from the Contacts application. Create a new message to the newly created contact and try again.
    7. Back up and restore your iPhone as new.
    8. If your carrier has recently ported your phone number, the porting process may not be complete. Contact your carrier to confirm that the porting process is complete.
    9. Contact your carrier to verify that you are provisioned to send SMS and are in an area with cellular coverage.
    10. Contact your carrier to verify that there are no blocks or filters placed on your wireless account preventing you from sending SMS.
    11. Your carrier may require APN settings to be modified to use MMS. Learn more about when you should adjust APN settings.
    Thanks,
    Matt M.

  • I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help!

    I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help! I don't want to have to be stuck using my internal speakers!
    Thank you,
    Chris

    Michael,
    Thanks. I haven't mixed down the audio or checked the number of tracks in Prefs. Good points.
    As far as a mixdown goes, I'll definitely give it a try, though I wonder whether or not the tracks will be recognized during mix down recording - given that you can't hear either of those segments in playback. Just have to try.
    Re the preferred number of allowed tracks - I'll go check as soon as I send this off, but I'm not sure that applies in this case, since the two Channels containing the segments that are pinked out are not in additional tracks. I should have mentioned that other audio clips and segments on the same Channels in the SAME tracks ARE heard in playback. As are two additional track in the 2nd Sequence. It's only when the two sequences are joined that the pink tinted segments can't be heard. Within the sequence the same audio cuts playback as they should. Thanks again &
    Best regards,
    David

  • I received my new Iphone 6 last week, backed my iphone 5 and then restored my new handset.  It has been working fine until today when I deletec all my contacts from my old handset.  Contacts have gone from my new handset too, how do I get them back?

    I received my new iphone 6 last week, backed my iphone 5 and then restored my new handset.  It has been working fine until today when I deleted all my contacts from my old handset.  Contacts have gone from my new handset too, how do I get them back?  I don't think the back up was done using icloud as I keep getting the message "not enough memory"

    The point is not whether you used iTunes or iCloud to restore your new iPhone. It's whether you have Contacts turned on in Settings > ICloud. If you do on both your old iPhone and new iPhone then those devices are connected through iCloud. Deletions on one device are also made on the other.
    You may be able to restore your Contacts be using your old device backup to restore your new iPhone again. Make sure that you turn Off ICloud functionality on your old iPhone before you delete anything else from it.

  • I am trying to export a video from Premiere Pro.  I have both audio and video checked and the sequence is active but only the audio exports.  There is no video at all.  Can anyone tell me how to get the video to export.  It was working fine until today.

    Premiere Pro CC has been working fine until today.  I have completed my sequence and it is active.  I have both audio and video checked when I am exporting using H.264 with Match Source Hi bitrate.  I am choosing entire sequence.  The audio exports but the video and title does not.  Can anyone tell me how to troubleshoot this so I can complete this project?  Please!

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • PDF files not being displayed correctly, instead I get a blank screen with some sort of small pinned icon in the centre.  It was working fine until today HELP!

    PDF files not being displayed correctly, instead I get a blank screen with some sort of small pinned icon in the centre.  It was working fine until today HELP!

    What is your operating system?  Reader version?  Are these local or online PDFs?  If online, in what browser?
    Can you post a screenshot: https://forums.adobe.com/thread/1070933

  • Mail suddenly marks as spam what is not and viceversa. It has worked perfectly until a few days ago. How can I restore the old junk "learnt" list? Where is it to be found?

    Mail suddenly marks as spam what is not and viceversa.
    It has worked perfectly until a few days ago. How can I restore the old junk "learnt" list, since it is marking as SPAM senders who have been my correspondants for years?? Where is the old junk pref file to be found?

    Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
    I suggest that no response is made to this duplicate thread. 

  • I bought Apple TV3 , it was working fine until today and stopped showing the status light. Please help.

    I bought Apple TV3 , it was working fine until today and stopped showing the status light. Please help.

    try another cable it's a std cable that most consumer electronic use
    if that does not help then I would try to connect it by a microUSB cable to see if I could restore the firmware from a computer running itunes
    if that does not help then I would say that the appletv have died

  • I purchased a new iphone 4 last week and it has worked fine until yesterday the screen was freezing.  I have restored from a back up a few times but this does not help. Any thoughts?

    I purchased a new iphone 4 last week and it has been working fine until yesterday the screen was freezing.  Today I have restored factory settings and restored settings from a back up from a previous iphone 3G.  The restore has not fixed the freezing issue.  Any thoughts?

    Only a week old? Take it back and get a new one one....call that one DOA,

  • My Gmail has been working fine until today. Now I cannot send messages. I can receive them fine.

    I have a brand new computer, using Yosemite. My mail program has been working fine for several days, but suddenly this afternoon it is unable to send mail. I can receive mail just fine. I can send mail from a different email account. How can I fix this?

    You are entitled to 90 day telephone support from Apple. Try contacting them.
    Apple Support Contact
    Apple Support contact - Telephone
    Mail troubleshooting - Yosemite
    What does Mail/Window/Connection Doctor Show? If the server is red, select it and look at the Show Details box.
    Troubleshooting sending email messages

  • How do I NOT get automatically redirected to www04.sub.su.se:#### when typing a certain address in the address field which has worked well until today (still works well in IE).

    There are some databases/sites that I have access to when having an IP number on university campus or with a proxy. This worked well in firefox until today. When trying to visit those pages the addresses automatically change a second or two after pressing enter to something like: http://www04.sub.su.se:###/ combined with showing random webpages in the window. This seems to be something associated with firefox since I still have access to the pages in internet explorer.
    For example:
    If I write http://www.isiknowledge.com/ the address changes to http://www04.sub.su.se:2133/cgi-bin/[email protected].
    If I want to get to scholar.google.se I get redirected to http://www04.sub.su.se:2087/
    When wanting to visit http://pubs.acs.org/about.html I will end up here: http://www04.sub.su.se:2110/about.html
    This problem only occurs on services where I in normal case can get access to articles in scientific journals. I have not encountered this problem in other cases/websites.
    I have tried to scan my laptop for viruses with Symantec Endpoint Protection and SuperAntiSpyware 4.45.1000. But nothing suspicious was found.

    Hi Magsrobby,
    Welcome to the forum and thanks for posting. I'm really sorry to hear you've had so many problems. I can look into this for you if you wish. Drop me an email with the details. You'll find the "contact us" form in the about me section of my profile. Once I have the details we'll take it from there.
    Cheers
    David
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • When I insert an SD card into the iMac nothing happens.  It worked fine until today, I double clicked on the card icon on the desk top and it disappeared! Any suggestions?

    When I insert an SD card into the iMac nothing happens.  It worked until today, when I double clicked on the SD card icon on the desktop and then it disappeared!  Cannot find in "Finder".  iPhoto does not open upon inserting card.  Reformatted card with device (camera).  Used Time machine to restart computer before the double click occurence...did not lhelp.  Any suggestions?

    Have a look in Finder Preferences: Click on the desktop, Finder>Finder Preferences.General tab - is there a tick in "External Disks'? If not, tick it.

  • HT3204 When attempting to burn an audio cd, I get an error message that says-burning failed due to unknown error (4280)?  It has been working fine, until today...what does this mean??

    When attempting to burn an audio cd from my playlist, I get an error message that says, burn failed due to unknown error (4280).  It has been working fine for months...any solutions?

    I have the exact same problem.
    Been searching through this site to try and find an answer but still not come up with anything.
    The wierd thing is that a couple of days ago it was working fine, and suddenly overnight it's stopped working.
    The only solution i've found is that you need to have administrator rights as it says in the posts on the site below:
    http://www.emergingearth.com/itunes-7-cant-burn-cds/
    Noticed by the diagnostic in your post that you dont have admin rights like me so that mite be the problem. Not sure if this is the right solution though.
      Windows XP  

  • GIMP / X11 worked fine until today

    I'm using GIMP with X11 and it works fine for me.
    Today I tried to start (as usual) it but it freezes with the splash screen. The splash screen isn't even visible just a white rectangle.
    I uninstalled GIMP and installed a fresh copy of it - no change. I rebootet - no change. I turned off the Mac - no change.
    Could the Mac OS X update to 10.4.4 be the problem? I didn't start GIMP for a while...
    Or should I reinstall X11?
    Mac mini   Mac OS X (10.4.4)   iPod 20 GB (4th gen.)

    Just found this site:
    http://episteme.arstechnica.com/groupee/forums/a/tpc/f/8300945231/m/502000627731
    Looks like the font cache needs to be rebuilt. From that article:
    "Try running sudo fc-cache -f -v from the Terminal. It will rebuild the fontconfig indexes. WorkedForMe(tm)."
    I tried it. It looked like it was possibly doing something but I couldn't tell if it actually wanted input from me. I CTRL-C'd it and then just opened Gimp again and hid it (COMMAND+H on X11) with that white screen. After a few minutes the normal Gimp windows popped up and I was back in action. It really does look like it was rebuilding the Font Cache.
    Inkscape now also works, too.

Maybe you are looking for