Suddenly, when I print a Selection from an email, it prints out about 10 blank pages and somewhere in there, the selection I wanted.

I'm using Firefox 12 on Windows XP. Things worked fine until just this evening. Now when I choose Print/Selection in my email, it spits out multiple (like, maybe 10 or more) blank pages with just a header/footer on them. I've followed the instructions for reseting the Firefox printer setting AND Reseting all Firefox printer settings and it still does it. Everything prints fine in Internet Explorer. This printing issue is getting REALLY tedious. I don't want a complicated workaround, I just want to print a selection. NOW why isn't it working?

Thanks, Cor-el, but that question addressed a problem I had with FF11 (that was only fixed when FF12 came out). FF12 worked fine for printing selections from emails perfectly up until yesterday afternoon. Reboot didn't help, even after reboot when I preview what I want to print (thank goodness for that option, or I'd be going through a lot of paper) it's still showing the page of text I actually want to print, then 6-8 blank pages afterward. This is not happening with every email, I have noticed ths morning. It now happens with email sent from (or to, as a reply) a yahoo account in Sweden and email sent from (or in reply to) a gmail account in Canada. These previously printed fine. Other emails will print maybe one extra page. There seems to be no rhyme or reason why it would suddenly start doing this. Should I look at the source code? What would I be looking for?

Similar Messages

  • InDesign CS 5.5 does not print out image, just blank page

    I am printing to a Lexmark and when I print something from InDesign it will not print the image out. Sometimes it prints a blank page, sometimes it prints the border of the image, sometimes it actually prints the image. It is very intermittent but the majority of the time it doesnt print the image I am trying to print. I have tried messing with the printers and print drivers but nothing has worked. Is there something in InDesign that is wrong?

    As I said, sometimes ID and a particular printer driver don't interact well. Printing directly is not really a primary function from ID and it is what it is. Printing from PDF is faster and more reliable 99.9% of the time, presuming you export the PDF correctly. A good place to start, if you aren't doing color management iin the ID print dialog, would be to use the PDF/X-4 preset.

  • I am not computer savvy. I was the one with the deleted dictionary. It does not show up in the trash as an icon. just a lot of files. How can I reinstall it from my back up dics? can I look through and just click on the application I want to re install?

    Here I am again.
    Can I trust the install dvd to scan my computer to find the missing program?
    Can I look through the installation dvds to find the dictionary program and just click to install it?
    Would it be easier to install a free dictionary from the internet for macbooks?
    This is so frustrating: I don't even know why Apple would allow its program to show up on a nikon download of photos??? I mean really I thought they were the masters of protection?!
    I never thought that by deleting it from my camera that it would delete the entire program from my computer. That in itself is something that APPLE TECS SHOULD LOOK AT DON'T YOU THINK

    Here is what worked for me:
      My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

  • When I print a doc from firefox 5 all I get is a blank page, nothing wrong with the printer

    Ever since my last upgrade ( to fire fox 5) I don't have a google tool bar , and when I try to print anything from firefox all I get from print or print preview is a blank page! I have done all the maintenance to printer and it prints fine on test and google chrome.

    Thanks, Cor-el, but that question addressed a problem I had with FF11 (that was only fixed when FF12 came out). FF12 worked fine for printing selections from emails perfectly up until yesterday afternoon. Reboot didn't help, even after reboot when I preview what I want to print (thank goodness for that option, or I'd be going through a lot of paper) it's still showing the page of text I actually want to print, then 6-8 blank pages afterward. This is not happening with every email, I have noticed ths morning. It now happens with email sent from (or to, as a reply) a yahoo account in Sweden and email sent from (or in reply to) a gmail account in Canada. These previously printed fine. Other emails will print maybe one extra page. There seems to be no rhyme or reason why it would suddenly start doing this. Should I look at the source code? What would I be looking for?

  • Why does my FCX program quit suddenly when I try to capture from my camcorder?

    Why does my FCX program quit suddenly when I try to capture from my camcorder?
    When it opens it says "no codec found". I used HDV Apple intermediate codec 1080i60. What codec should I use?

    Do you mean Final Cut Express or FCP X?
    These are two different apps.
    Al

  • When I try to print out something on my macbook pro,it cuts off the bottom, but if printed from a pc I get the whole article

    when I try to print out something on my macbook pro, it cuts off the bottom, if printed from PC the whole article is printed

    marionfromclermont wrote:
    I have HP Photosmart 55510 series. In the print dialogue box it shows where the bottom of the 1st page is cut off and the top of the second.
    Yes, but the part cut off the bottom of the first page should appear at the top of the second. No content should be lost, just split between pages.
    Safari makes little or no attempt to keep a line of print or a picture from splitting across pages, seemingly just imaging the web page as one large image and printing so many inches or millimeters of the image per page.

  • I have an iPhone 4S and never had a problem with syncing it. But suddenly, when I connected my phone to my mac, it says that its in recovery mode, and I need to restore it in order to sync. I've updated both my phone and my itunes, and it didnt work.Help?

    I have an iPhone 4S and never had a problem with syncing it. But suddenly, when I connected my phone to my mac, it says that its in recovery mode, and I need to restore it in order to sync. I've updated both my phone and my itunes, and it didnt work.Help?

    fighter19lisa wrote:
    that only makes it say its synced, when its not.
    No, it does not.  It transfers purchases from the iDevice to the computer.  The computer must be authorized for the Apple ID that the content was acquired with.
    fighter19lisa wrote:
    my playlists wont show up on the phone.
    Are they selected to sync?  Is Manually Manage content on the device selected?
    fighter19lisa wrote:
    i had to change my password for my aol account again and i still cannot get my email on my phone to even work
    What does that have to do with syncing content to the device?  FYI, nothing.

  • For some reason , when i restore my iphone 4s to factory settings my headphones work when listening to music or youtube videos but when i backup my information onto it , it only comes out of one ear bud and i just got a new one from the apple store.

    for some reason , when i restore my iphone 4s to factory settings my headphones work when listening to music or youtube videos but when i backup my information onto it , it only comes out of one ear bud and i just got a new one from the apple store. my old iphone 4s audio jack was messed up but i just got a new one with my warranty , can anyone help me please.

    It doesn't matter what it is in your backup that's causing the problem because you can not selectively restore things from your backup. It's all or nothing.
    Set you phone up as a new device and start over.

  • TS4118 When I print out my ical calendars, there are three duplicate events happening every day of the week and I never entered this event?

    When I print out my calendars from ical, there is one event that is reoccurring 3x/day/every day of week! It is not showing on the actual calendar and I cannot figure out how or where it's coming from? It's in the calendar marked Jimmys action which just shows my sons activities and for this activitiy, I put one day with a recurring weekly on just two days of the week at a specific time and this is showing up as well and correctly? What should I do to remedy this?

    UPDATE: I think I found the answer to my problem. I travel between two time zones and recently started listing event times as "floating" so they don't get messed up when I travel between west and east coasts. It seems that when I want to print out a calendar sheet, the time of the event doesn't show up if it's a "floating" event. So, I need to go back to putting a time zone in and turning off "time support" in Preferences for iCal. BTW this (in reverse) is a solution for those who don't want to see appointment times printed out – make it a "floating" event.

  • When I print out photo thru iPhoto, the result is too dark.

    Hi all,
    I have a problem with printing a photo via iPhoto recently.
    I remember when I used iPhoto 9 to print out some of my photos but at that moment the result was pretty OK to me.
    However, I don't know exatly when but I guess it could be since I upgraded to iPhoto 10...
    Everytime I tried to print out some of my photos from my iPhoto library, the result is way too dark than its original color.
    I am using HP Photosmart device(C410ㅁ) with fuji photo papers.
    I tried to change several options like color sync or printing quality but NO use!!
    Strange thing is that if I use airprint with my iPhone or iPad, color level seems to be OK.
    But again, iPhone airprint doesn't give any options to manage printing quality level, it couldn't mitigate my problem, either.
    Is there anyone out there who has the same or similar problem just like me?
    Please share your knowledge to solve this issues.
    Thanks in advance
    Luke.

    What is the color profile of the photo?
    LN

  • TS3999 How do I print from i cloud? I can access and add appointments but cannot print. Only a blank page shows up.

    How do I print from i cloud? I can access and add appointments but cannot print. Only a blank page shows up.

    Select the day. then look on the bottom left where you will see the word, TODAY, select it then select print frame.

  • I noticed when I restart Firefox 4, it opens my previous tabs even I set the option "Open a blank page" and it opens blank page when I have "Show my windows and tabs from last time". Please ignore my question if you're already aware of this issue. Thanks.

    I noticed when I restart Firefox 4, it opens my previous tabs even I set the option "Open a blank page" and it opens blank page when I have "Show my windows and tabs from last time". Please ignore my question if you're already aware of this issue. Thanks.

    Your previous tabs will not re-open or be available to re-open when starting Firefox if:
    *your previous session was in Private Browsing mode; see --> http://support.mozilla.org/en-US/kb/Private+Browsing
    *you use Clear Recent History (''Firefox button > History > Clear Recent History'' or ''Tools > Clear Recent History''); see --> https://support.mozilla.org/en-US/kb/Clear%20Recent%20History#w_how-do-i-clear-my-history
    *you clear History automatically when closing Firefox; see --> https://support.mozilla.org/en-US/kb/Clear%20Recent%20History#w_how-do-i-make-firefox-clear-my-history-automatically
    NOTE: Your third-party Plugins (Add-ons > Plugins) are not in the "Application Basics" (Troubleshooting Information) in the "More system details" of your original post. Third-party Plugins are categorized separately in "Installed Plugins" under "More system details". You should review but not change the Plugins as detected automatically by the software on this forum when posting a question.
    If you problem still exists after checking the above, the problem could be caused by one or more of your Extensions or Plugins:
    *See --> [http://support.mozilla.org/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
    *See --> [http://support.mozilla.org/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
    *See --> [http://support.mozilla.org/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

  • My computer died when I was syncing music from iTunes onto my iPad. I can reset it and get it running, but I want to get back my photos and videos. How do I get back photos and videos in recovery mode?

    My computer died when I was syncing music from iTunes onto my iPad. I can reset it and get it running, but I want to get back my photos and videos. How do I get back photos and videos in recovery mode?

    Clucktastic wrote:
    How do I get back photos and videos in recovery mode?
    Once the Device is asking to be Restored with iTunes... it is too late to save anything...
    See Here  >  http://support.apple.com/kb/HT1808
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • I bought a iPhone 6 yesterday and I restored my iPhone 6 from my iTunes back up. After my phone restored from back. When I plug my iPhone 6 it's still saying my iPhone 6 is new and still giving me the restore from a back up or set as a new iPhone

    I bought a iPhone 6 yesterday and I restored my iPhone 6 from my iTunes back up. After my phone restored from back up. When I plug my iPhone 6 it's still saying my iPhone 6 is new and still giving me the restore from a back up or set as a new iPhone option. But I already have it restored. How come it's not giving me any option to cancel.

    Click set up as a new iPhone. It will associate the device with your library without clearing the content that you have already loaded onto it.
    tt2

  • I have been unable to print from FF to Brother HL-1440. print generate pages w/odd bits of text from the page, and sometimes one image. If I want to print off the web, I have to print PDF. Older versions of FF print fine.

    I have been unable to print from FF to Brother HL-1440. print generate pages w/odd bits of text from the page, and sometimes one image. If I want to print off the web, I have to print PDF. Older versions of FF print fine.

    I downloaded OpenOffice and am able to print documents (in particular, the same document I created in MS Word). I guess MS Word is to blame. I believe the issue is concluded, but I'd welcome any comments about the Active Directory, as I might have a problem
    with OpenOffice in the future regarding that.

Maybe you are looking for

  • Multiple mutt accounts issues

    Hi guys, i have issues with multiple account hook in mutt this is my actual muttrc set editor=/usr/bin/vim set pager_stop = yes set pager_context = 3 set pager_index_lines = 15 set header_cache=~/.mutt/cache/headers set message_cachedir=~/.mutt/cache

  • HT1386 how can I sync my iphone to an empty itunes

    Well I've had to wipe my computer to get rid of a Trojan. Everything on my iTunes is now on my iPhone, and now I've just re-downloaded iTunes. How can I sync my phone to iTunes without erasing my iPhone? Because it says something about my phone has a

  • How to Install Adobe Flash player without Google Chrome?

    I am using IE9 with Bing as my search engine on  a 64bit Windows Vista System.  When I tried to watch a video while online I received the error msg  that I needed to download Adobe Flash Player. When I tried to download the Flash Player I saw that Go

  • Short description on bdc

    Hi ABAP GURU'S. PLZ give short discription of Recording screen field name in BDC. 1-What are the meaning and use of Local, synchronous, asynchronous update mode. 2- What is the full name of CATT MODE and dscribes these mode. NO CATT. Catt without ind

  • Can anyone explain how SCCM 2012 applies its firewallpolicy.

    Can anyone explain how SCCM 2012 applies its firewall policy? My understanding is that it does this by altering the local policy on the client computers. What i am seeing though is that administrators can still change these options manually. But if i