Sudo nvram boot-args='-v' not working in10.8

I want to turn on verbose via terminal. I used to use the above command in terminal. however it does not seem to work in ML. Has it changed?

it worked, thank you.
did it change from '-v' to "-v"? or?
Message was edited by: ChangeAgent

Similar Messages

Last week I've install Mac OS X Mountain Lion and then after the installation finish my IMAC start up in verbose mode. How can I turn off this mode and start my IMAC normally. I've try to key in the code "sudo nvram boot-args=" in terminal also.

Last week I've install Mac OS X Mountain Lion and then after the installation finish my IMAC start up in verbose mode. How can I turn off this mode and start my IMAC normally. I've try to key in the code "sudo nvram boot-args=" in terminal also.
Thank you for all of your answer.

I've seen it mentioned on here that a PRAM reset may solve it:
Reset PRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P and R.
You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

[svn:fx-trunk] 5445: Fix for - @ copy tag for two methods with different arg lists not working.

Revision: 5445
Author: [email protected]
Date: 2009-03-19 17:47:57 -0700 (Thu, 19 Mar 2009)
Log Message:
Fix for - @copy tag for two methods with different arg lists not working.
Some changes for refactoring.
QE Notes: None.
Doc Notes: None.
Bugs: SDK-19975
tests: checkintests, asdoc
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-19975
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/AsDocUtil.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelClassesGenerator.ja va

Revision: 5445
Author: [email protected]
Date: 2009-03-19 17:47:57 -0700 (Thu, 19 Mar 2009)
Log Message:
Fix for - @copy tag for two methods with different arg lists not working.
Some changes for refactoring.
QE Notes: None.
Doc Notes: None.
Bugs: SDK-19975
tests: checkintests, asdoc
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-19975
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/AsDocUtil.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelClassesGenerator.ja va

Lenovo G580 boot menu is not working when pressing F2 and F12 key

QuestionI bought a new Lenovo G580 series laptop. After installation of Windows 7 Ultimate x64 bit edition, a problem revealed when Lenovo driver get installed.
When I installed Intel HD 3000 graphics driver and restarted laptop, the Window was unable to start normally. It displayed an error, so a recovery program started which was recommended. But this program failed to resolve the problem. Later, I tried again to load Windows normally but the blue screen fatal error showed up.
I attempted to reinstall Windows again, but after restarting window, the boot menu was not showing up after pressing F12 key. F2 key was also not working either.
I spoke to a Lenovo techincal assistance expert and they suggested me to remove battery and charger and press start key for 30 seconds.
My problem still remains the same, and I am unable to access boot menu.
The bios version is 62cn34ww. ls there a way I can get this running again?
AnswerPlease take note that the suggestion below is just a troubleshooting guide. If the steps could not fix the issue, you need to send you machine in for service for further assistance.
Try removing the hard disk , then press F2 button to enter BIOS
If you are successful in entering the bios, pleaes load set up defaults
Save setting by pressing F10 and shut the machine down
Connect the hard drive back and check if can enter BIOS via F2 and F12 to see boot menu

"OK, I will retain my sanity.... changed & of course forgot windows 7 password on my Lenovo H430 desktop. (about a month ago) came accross my windows disc & was going to see if I could boot from it (wouldn't from the pasword unlocker i downloaded) Anyhow, i evidently have a password to enter bois setup which i attempted to "guess" baaad idea. i am now looking at Fatal Error.....System halted on my Lenovo H430 desktop. how do i proceed without doing any damage??? HELP...

Tried Everything - Boot Camp will NOT work!

Hello everyone, for about the past 7 days, I have tried installing boot camp on my macbook pro late 2011. My MBP Has an hdd in the optical drive bay, and a hybrid drive in the hdd bay. Recently, after the failure to install boot camp the first few times, I bought an enclosure for my optical drive. I have a copy of windows online in iso format, so everything should be working, but, it has not. I have tried using a bootable usb flash drive, with SEVERAL different ones, to no avail. I have made boot camp look as if I had a MBA, to no avail. I have burned a bootable iso to a blank cd, to no avail. NOTHING HAS WORKED. I have waited around 32 hours of work in 7 days to post onto this website, thinking I can do it myself, but I simply cannot. When I did the bootable usb drive method, I got a please insert the bootable disk, and then press any key. And then when I did the bootable blank dvd with a bootable iso on it, all my mbp would do is blink that cursor thingy on the black screen. EVERY single usb drive was taken out for the computer. The only things plugged in were my charger, and the external optical drive bay. Please help me with any useful info, as it would help me so much.
P.s. I have also used Wine/Crossover. I am ONLY doing this so I can game windows games on Steam. It is the sole and only reason for this venture. Crossover did not have enough support for the games I wanted to play, and would crash often, and Wine will not work with some of the newer games, with very little support/incentive from developers. Please if I have done something wrong by trying to use these, or maybe I'm just not using them right, please tell me.
If anyone has any other solutions to windows games played on a mac through steam, please tell me, It would mean a lot.
This has been a very frustarating adventure, and I really would love to get this resolved. Whoever gives the advice that ends up working, will get best answer. Thanks!

If you had done any google searches for installing Windows on your model Mac computer you might of found out that Windows will ONLY INSTALL from the BUILT IN DVD drive when it is installed INSIDE the system. So since you have replaced that drive with a hard drive there is absolutely NO WAY to install Windows on your Mac. It will not install from a USB key, It will not install from an external DVD drive, it will not install from any other source other than the built in DVD drive when that drive is installed INSIDE the system.

Pavilion dv7 advanced boot options keyboard not working

1. Print screen key has never worked
2. In Advanced Boot Options screen, arrow keys do not function to select Safe Mode, Esc key does not work to cancel out of screen.

Hi,
Does the arrow and esc key works in Windows?
If it doesnt work in windows also then i can suggest you to try doing a hard reset and check..else could be a hardware issue
How to Perform Hard Reset
Note:
If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
Although I am an HP employee, I am speaking for myself and not for HP.
**Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

Boot Camp Wifi Not Working; Windows Vista 32 Bit

Hey, alright, I got this huge problem. I installed Windows Vista 32-Bit edition on Boot Camp 2.0. I installed the drivers on my Leopard CD. For some reason I can connect to the net on the Leopard side (which I am using right now) and I just can't get a connection on the Windows side. So remember I did install the drivers on the Leopard disc. Also, when I go to device support on Vista, the drivers have yellow triangles beside them. I tried to hook the ethernet cable up and it still won't have an internet connection. I do have the Macbook Pro Aluminum model (newest one) so can someone please help me and tell me what I am doing wrong? Maybe you can tell me a driver I can download to get this working? Thanks!

Boot Camp will not support Vista on newer iMacs, you will need to upgrade to Windows 7. Also as an FYI there is a Boot Camp forum, you can locate it by clicking Apple Support Communities and then in the search field type Boot Camp.
Best of luck,
Roger

MacBook Pro mid 2010, gray screen at start up, boot from dvd not working.

Backstory:
I was in the process of installing Windows 7 using boot camp, but I was a little bit low on HD space. So, I deleted the user account that had a ton of stuff, and did some other crap that messed up my hard drive. So my computer just won't boot. It shows a gray screen 24/7, going into safe boot/safe boot + verbose doesn't fix the problem. I tried booting from an OSX Leopard dvd, but it won't work when I hold down C, and when I choose the Mac OS X Install DVD option after holding the option key, when I click the arrow button it freezes and doesn't boot. I have Lion installed, and apple says not to boot with an older version of OSX DVD, but there is no Lion DVD.
What do I do?
PS: I'm trying to boot using the DVD so I can reformat my hard drive, trying to do so in Recovery HD doesn't work because it says it 'Can't unmount drive'.

Rockswim,
did it do that only once, or does it do that every time you restart it?

Lost sound on ipad, re-booted, checked settings, not working

I suddenly lost my sound on my ipad after refreshing a live feed. I have checked all settings, re-booted, etc and still no sound.

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) http://support.apple.com/kb/ht1430
Check your settings. The iPads have a small switch on the right edge. http://support.apple.com/kb/ht1430 It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
iPhone: Can’t hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
To solve some sound problems, just follow these simple steps
1. Go to Settings
2. Tap on General
3. Tap on Reset
4. Tap on Reset All Settings
What this effectively does is to reset some of your Settings to factory default. It’s not a complete removal of settings. It removes all of your preferences for Wi-Fi, Bluetooth, Do No Disturb, Notifications, General, Sounds, Brightness & Wallpaper and Privacy. It doesn’t affect your data. All of your email accounts will remain intact, as well as any SMS text or iMessages.
 Cheers, Tom

Macbook Pro won't boot up, recovery not working

A few days ago my macbook pro crashed. it was being unresponsive for about 5 minutes so i turned it off and on again (ive done this a lot). except this time when i went to turn it back on i saw the grey folder with a question mark on it. i looked a lot into what to do but am currently stuck because i have tried everything ive seen and nothing has worked.
i went into internet recovery holding option when starting up because internet recovery was the only option it provided.
i have tried to install a new copy of OSX but when i get to the screen where it asks where i want to install it to, there are no locations for me to chose from.
i have tried going into disk utility but it doesnt give me the option to select my main disk, only the recovery one it just downloaded.
it seems that the computer is completely disconnected from the operating system.
I believe the problem might have something to do with me going a long time without updating software (i know it's stupid but i have a hatred for constant updates when the version i use works just fine)
I need to keep my files from this computer, it is absolutely crucial that my hard drive is not wiped.
is there a way to back up my files from this stage? i don't have a backup from before it crashed (sorry for not expecting my computer to just fail on me)
I have had this computer for less than a year.
so the main thing I need is to recover my files, even if it requires physically taking the hard drive out of the laptop to recover them on another computer.
any help is appreciated, thanks.
(p.s. I forget exactly which OS it was on, but i believe it was Mavericks, not sure which version of it)

The symptoms that you are describing indicate that your internal HDD has died. Your data may be lost or require professional recovery services to retrieve.
Enter the serial number (on the bottom) of your MBP here and post back the model information:
https://selfsolve.apple.com/agreementWarrantyDynamic.do
Ciao.

PXE Boot and RIS not working

I'm trying to boot a toshiba SP6100 from ris but getting
PXE-T01:File not found
PXE-E3B: TFTP error - File not found
PXE-MOF: Exiting Intel PXE ROM.
No problem what so ever when booting other mashies (Other brands).
When trying to boot from a Remote boot disk i get:
Error: Could not found a supported network card.....
PC is running latest bios (1.9)
Any suggestions?

Hi
I have found an interesting Microsoft Knowledge Base Article Q304992.
It deals with the PXE Boot and RIS server method, perhaps it could help you!
Pelox

Boot camp assistant not working correctly...

I'm trying to install Windows 7 using boot camp and everything goes fine and dandy, it partitions and then shuts down and restarts and goes to the installing windows screen and freezes about a tenth of the way through. I'm wondering if it's the drive I'm using or if anyone has any suggestions? Being that I'm running on a Macbook Air, I just bought an LG GP10 external CD/DVD drive. I've tried plugging it in a number of different ways and so far no luck. By that I mean it's one of those drives that needs external power, but it gets the power from two USB drives. When I'm running on my Mac it works fine taking the power from one USB, but for some reason it starts to get weird when it goes to try and install Windows. I don't have two USB ports next to each other and the Y cable it comes with is very short, meant for two USBs next to each other. I also have a Belkin USB hub that I tried using a number of different ways but so far nothing is working... it's very frustrating and I'm just looking for any suggestions anyone might be able to offer. Is it possible power management is the problem? If you need more information or my description wasn't sufficient (I know it's confusing!) just ask, I'll be stalking this forum until I figure this out.

With the BCA 3.0 the Driver Download never worked except for MacBook Airs.
The Boot Driver version 3.0 are located on your OSX Snow Leopard Install DVD.
Boot into Windoes and insert that DVD. Usually the Driver Setup starts automatically.
After that you can use the downloaded Driver Packages 3.1 and 3.2 and install them while in Windows (these are .exe files - only executable in Windows).
Hope it helps
Stefan

Boot Camp Assistant Not Working - Mountain Lion, Windows 8

Ok, so I'm trying to dual boot my computer with Mountain Lion and Windows 8. I already have Mountain Lion downloaded, and I have the ISO file for Windows 8 (because I'm a collge student, and our college has a partnership with Microsoft). The problem I'm having is when I lanch Boot Camp Assistant, it takes me through a page or 2. Then it has 2 boxes as options to check ( 1. Download the latest Windows support software from Apple; 2. Install or remove Windows 7), but I can't select the 2nd option... When I select the first, I download the support software, and then it tells me to quit boot camp. So I do, and when I open it back up, it attempts to repeat the same actions.
What is going on?!?!?!?!

The ISO is on your hard drives.
download a free iso burning program for Mac (we used SimplyBurns Mac). That program runs you through the necessary steps to properly burn the iso file you need. After doing so, Bootcamp recognized the installation file and everything worked as it should.
https://discussions.apple.com/thread/3410900?start=45&tstart=0
SimplyBurns is a Mac OS X application with a GUI, which allows the user to burn CD / DVD media.
Features:
Emphasis on ease of use
Audio CD project, Data project (Filesystems: ISO9660, Joliet, HFS+, UDF) and Burn image mode
Erasing rewritable media
Persistence
http://simplyburns.en.softonic.com/mac
See this article on downloading the ISO:
http://www.mydigitallife.info/windows-7-iso-x86-and-x64-official-direct-download -links-ultimate-professional-and-home-premium/
(Make sure you choose the ISO that matches the version you bought).
Here's instructions on burning an ISO with Disk Utility:
http://lifehacker.com/251758/mac-tip--how-to-burn-an-iso-or-dmg-file-to-disc
And this thread on burning a Windows DVD in OSX:
https://discussions.apple.com/thread/2039118?start=0&tstart=0
(Summary: you can use Disk Utility to burn the ISO, but choose a slow burn speed)

Boot Camp will not work after installing recovery disk

I purchased a refurbished Macbook Pro 2012. I went ahead and installed dual ssds and used the Mac OS X recovery disk from USB flash drive. I wanted to install WIndows 7 through bootcamp. Bootcamp will not start after selecting continue. I'm not sure if boot camp is corrupted or something I did wrong.

Well you'll need to see if that remote app has an update or if it is compatible with IOS 7.
since you didn't state which remote app your using.

M57 AHCI mode - does not boot, reset flash not working.

M57 - 6071 CTO
I have changed in BIOS the AHCI mode to native SATA and RAID. The security chip was active before that.
Now, the PC won't start - it stops at the big logo with ThinkCenter (and intel logo on top right).
Pressing ENTER or F1 does not get me back to the BIOS (to change the settings back).
I tried to clear CMOS and still it acts the same.
What do I need to do to get it working again?

I fix it.
To really clear the CMOS, I needed to power up the PC with the jumper on 2-3 position. It beeped one LONG and two SHORT and then I replaced the jumper on the previous position (1-2).

Sudo nvram boot-args='-v' not working in10.8

Similar Messages

Maybe you are looking for