Sudo whoami says I do not exist

Acrobat X updates want load, and TechTool 7 won't load, ran sudo whoami and it states I do not exist,
so does that mean there is an issue with the root directory, how do I fix it? I am writing form MB Pro the
error is on my iMac.

How to maintain a Mac
1. Make redundant backups, keeping at least one off site at all times. One backup is not enough. Don’t back up your backups; make them independent of each other. Don’t rely completely on any single backup method, such as Time Machine. If you get an indication that a backup has failed, don't ignore it.
2. Keep your software up to date. In the Software Update preference pane, you can configure automatic notifications of updates to OS X and other Mac App Store products. Some third-party applications from other sources have a similar feature, if you don’t mind letting them phone home. Otherwise you have to check yourself on a regular basis. This is especially important for complex software that modifies the operating system, such as device drivers. Before installing any Apple update, you must check that all such modifications that you use are compatible.
3. Don't install crapware, such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” "boosters," “extenders,” “cleaners,” "doctors," "tune-ups," “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, this stuff is useless, or worse than useless. Above all, avoid any software that purports to change the look and feel of the user interface.
The more actively promoted the product, the more likely it is to be garbage. The most extreme example is the “MacKeeper” scam.
As a rule, the only software you should install is that which directly enables you to do the things you use a computer for — such as creating, communicating, and playing — and does not modify the way other software works. Use your computer; don't fuss with it.
Safari extensions, and perhaps the equivalent for other web browsers, are a partial exception to the above rule. Most are safe, and they're easy to get rid of if they don't work. Some may cause the browser to crash or otherwise malfunction.  Some are malicious. Use with caution, and install only well-known extensions from relatively trustworthy sources, such as the Safari Extensions Gallery.
Never install any third-party software unless you know how to uninstall it. Otherwise you may create problems that are very hard to solve.
4. Beware of trojans. A trojan is malicious software (“malware”) that the user is duped into installing voluntarily. Such attacks were rare on the Mac platform until sometime in 2011, but are now increasingly common, and increasingly dangerous.
There is some built-in protection against downloading malware, but you can’t rely on it — the attackers are always at least one day ahead of the defense. You can’t rely on third-party protection either. What you can rely on is common-sense awareness — not paranoia, which only makes you more vulnerable.
Never install software from an untrustworthy or unknown source. If in doubt, do some research. Any website that prompts you to install a “codec” or “plugin” that comes from the same site, or an unknown site, is untrustworthy. Software with a corporate brand, such as Adobe Flash Player, must be acquired directly from the developer. No intermediary is acceptable, and don’t trust links unless you know how to parse them. Any file that is automatically downloaded from a web page without your having requested it should go straight into the Trash. A website that claims you have a “virus,” or that anything else is wrong with your computer, is rogue.
In OS X 10.7.5 or later, downloaded applications and Installer packages that have not been digitally signed by a developer registered with Apple are blocked from loading by default. The block can be overridden, but think carefully before you do so.
Because of recurring security issues in Java, it’s best to disable it in your web browsers, if it’s installed. Few websites have Java content nowadays, so you won’t be missing much. This action is mandatory if you’re running any version of OS X older than 10.6.8 with the latest Java update. Note: Java has nothing to do with JavaScript, despite the similar names. Don't install Java unless you're sure you need it. Most people don't.
5. Don't fill up your boot volume. A common mistake is adding more and more large files to your home folder until you start to get warnings that you're out of space, which may be followed in short order by a boot failure. This is more prone to happen on the newer Macs that come with an internal SSD instead of the traditional hard drive. The drive can be very nearly full before you become aware of the problem. While it's not true that you should or must keep any particular percentage of space free, you should monitor your storage consumption and make sure you're not in immediate danger of using it up. According to Apple documentation, you need at least 9 GB of free space on the startup volume for normal operation.
If storage space is running low, use a tool such as the free application OmniDiskSweeper to explore your volume and find out what's taking up the most space. Move rarely-used large files to secondary storage.
6. Relax, don’t do it. Besides the above, no routine maintenance is necessary or beneficial for the vast majority of users; specifically not “cleaning caches,” “zapping the PRAM,” "resetting the SMC," “rebuilding the directory,” "defragmenting the drive," “running periodic scripts,” “dumping logs,” "deleting temp files," “scanning for viruses,” "purging memory," "checking for bad blocks," "testing the hardware," or “repairing permissions.” Such measures are either completely pointless or are useful only for solving problems, not for prevention.
The very height of futility is running an expensive third-party application called “Disk Warrior” when nothing is wrong, or even when something is wrong and you have backups, which you must have. Disk Warrior is a data-salvage tool, not a maintenance tool, and you will never need it if your backups are adequate. Don’t waste money on it or anything like it.

Similar Messages

  • I have created a data module in s1000d application of framemaker 10.While publishing it in publication module it says"File does not exist".

    1- I have created a data module in s1000d application of framemaker 10.While publishing it in publication module it says”File does not exist”.
    2- Does FrameMaker 10 supports s1000d 4.1 ?

    See Lorna...it's almost second nature to you now,
    editing those js files! I TOLD you you could do it!
    Mark, it's EERIE that you should say this to me today because this is exactly what I have been thinking! I can put a song on a page with one eye shut now, and I can zip around those files pretty well (except for the recent fiasco where I didn't even look at the right folder). I also notice that the level of my writing is sounding more technical and familiar with digital world jargon. I remember how you told me I could do it, and you were right. You all were right and I feel more knowledgeable and at a point where I suspect that I can take steps on my own. HTML is a strange land, but just being able to edit that .js file and FIND it by navigating for it in Text Edit has made me feel much more competent.
    Before iWeb I didn't realize what Text Edit was for. I used it to take quick fast short notes. I never understood that concept of "opening something up in so and so application." The first time I clicked OPEN in Text Edit, and I saw all those danged files staring at me with beady eyes, I wanted to throw a white hanky and run for the hills. Not any more!
    Lorna in Southern California

  • Cumputor say hard disk not exist

    Hi I have a hp pavillion dv6notebook pc was working last night went off all I have is a black screen and it says hard disk not exist start up test was ok diagnostic log says f11 error lol 03f0i have no idea what's happened can you help

    Sounds lik the hard drive has failed and will have to be replaced. Did you test the hard drive using F2 Diagnostics?
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Hi I have two macbook pro, i connected one from another via lan cable , now when i removed it, its showing me some pop up again and again saying server may not exists and there was a problem connecting to ishan's macbook pro

    Hi I have two macbook pro, i connected one from another via lan cable , now when i removed it, its showing me some pop up again and again saying server may not exists and there was a problem connecting to ishan's macbook pro

    If you just reboot it, does the problem go away?

  • HP Pavilion dv6 1328sl, bios says : hard disk not exist !

    Good morning,
    the bios says that the hard disk not exist. Still, if I boot the PC from CD with Linux, the files on the disk c can be seen .. I deleted the partition but the problem remains!
    does anyone know how to access the advanced menu of the bios? It's an "Insyde"  f36. I want to see if there is something wrong option ...
    Thanx

    Try a hard reset, works sometimes.Disconnect all external devices first.
    1-remove power cord and battery
    2-press power button for 30 seconds
    3-reinstall only power cord for first startup.
    4-power on
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Why can i not add my file to an attachment, it keeps saying it does not exist, but when i use explorer it works fine?

    I was trying to upload my written assignment for a class to attach it to an email. The document was in Microsoft work 2007 version. It would not attach it just kept saying that the file is invalid or does not exist. I downloaded explorer and that browser attached the file just fine.

    Kaplan university online it is my assignment for school the url is kucampus/kaplan.edu it is for students of kaplan. I have never had this issue.

  • I recently downloaded a web page but then i deleted history which deleted the web page. there is still a short cut to it but says file does not exist. can i retrieve this as web page no longer exixts

    as the question states i downloaded a web page but before i put it on a memory stick i changed the options on my firefox and the file is no longer there.
    there is a shortcut in the 'recently changed' folder in windows explorer but when i click on it it says the file has moved or no longer exists.
    Is there anyway to retrieve this as the web page no longer exists

    Try:
    *Extended Copy Menu (fix version): https://addons.mozilla.org/firefox/addon/extended-copy-menu-fix-vers/

  • Cannot use home; message says url does not exist, and firefox homepage is gone.

    When I open Firefox, I do not go to the Firefox homepage. The page that comes up has Mozilla Firefox on the top blue bar, and the navigation bar file - help. Underneath it reads "new tab" and the location bar reads "go to a website" followed by the Google search box which does drop down to reveal the other search engines. This is followed by the "home" box. When I click on home, I get an Alert box that states "The URL is not valid and cannot be loaded." I do not get the Firefox home page when I open Firefox (but it does connect me to the internet), and clicking on home does not take me to the Firefox home page either. How do I fix this problem?

    Typing in "about:home" still gets the URL not valid message. There seems to be no home to which to default, so that doesn't work. I tried to take the system back to an earlier date; it doesn't work. When I go to an earlier date and open Firefox, it crashes and needs to be reinstalled. When reinstalled, it does not give me the Firefox homepage from which to work. I generally use Google as a search engine, but do not use a google tool bar. I am at a loss as to what to do.

  • I tried to access my account to sync and it says it does not exists!

    Well, actually, the title already said everything. I have tons of important bookmarks in my account and I can't access it, it says "Unknown account.". I know my password and the recovery key, also. I ever was able to do it, but, now, I can't! Also, if possible, after recovering it, I want to change the e-mail address... PLEASE, SAVE ME!
    ''(personal information removed by moderator. please see [[Forum rules and guidelines]] -m)''

    I think I got it: I just installed an old version of Firefox and sync it like the old times. Now I'm gonna sync it in the new way. I hope this helps someone else with the same problem. Thank you, the-edmeister, for trying to help.

  • Short dump 'Table does not exist in database'

    Hello All,
    When a report is executing it is going to short dump by saying 'Table does not exist in database'. As per the short dump analysis this issue is happening because of the following   Native SQL statement statement :
    Program :  %_T050N0 (This is a dynamic  program generating by SAP )
    Form Name :  DYN_LIC_SEL_TOT
    exec sql performing LOOP_MOVE_WRITE_ISAP.
    select single_plate, itm_num, ctry_code, model_lot,
    lic_hold_flg, qty into :dcat-lplate, :dcat-matnr,
    :dcat-werks, :dcat-charg, :dcat-holdflag,
    :dcat-qty from ZLICENSE_R2 where itm_num   = :p_matnr and
                    model_lot = :p_charg
    endexec.
    As per the customer this issue occurring since they migrated the SAP  back-end data base from Oralce to DB6. Here I felt that ZLICENSE_R2 is not migrated from the  Oracle to DB6. But as per the BASIS Team, even this table was not maintained in Oracle also. If the table was not maintained in the Oracle, this issue should have been there even before migration also.
    Following is the short dump details:
    Short text
        Table does not exist in database.
    What happened?
        The table or view name used does not
        exist in the database.
        The error occurred in the current database connection "DEFAULT".
    What can you do?
        Check the spelling of the table names in your report.
        Note down which actions and inputs caused the error.
        To process the problem further, contact you SAP system
        administrator.
        Using Transaction ST22 for ABAP Dump Analysis, you can look
        at and manage termination messages, and you can also
        keep them for a long time.
    Error analysis
        An exception occurred that is explained in detail below.
        The exception, which is assigned to class 'CX_SY_NATIVE_SQL_ERROR', was not
         caught in
       procedure "DYN_LIC_SEL_TOT" "(FORM)", nor was it propagated by a RAISING
    clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    Triggering SQL statement: "select single_plate, itm_num, ctry_code, model_lot,
    lic_hold_flg, qty from ZLICENSE_R2 where itm_num = ? and model_lot = ? "
    Database error code: "-204"
    Could you please  let me know what might be the reason for this issue.
    Many Thanks in Advance.

    Transaction SE11, input ZLICENSE_R2 for table name, and display the table. Did the table display? If not, that is the main problem.
    If the table displays, go to menu item Utilities -> Database Object -> Database Utility
    In the resulting screen, under the "Status" fields, you should see text "Exists in the database." If you don't, then the table exists in the dictionary, but doesn't exist in the database system. Click the "Create database table" button and then you should be able to run the program.
    You may need basis team's help to carryout some of these actions.

  • Unable to login: SAP System Message: Dynpro does not exist

    Hello All,
    I'm created a test system to practice our upgrade post steps on.  I created a pared down copy of one of our other systems.  When I try to login, I get a popup message saying: Dynpro does not exist.
    To create the pared down version, we used empty files for:
    COEP  
    GLPCA 
    BALDAT
    MSEG  
    BSIS  
    LIPS  
    LTAP  
    CE1LPOC
    ZHYPFIT
    BALHDR
    VBFA  
    COSP  
    COSB  
    CDCLS 
    ZHYPF2A
    /IRM0760
    CDHDR     
    COSS      
    CMFP      
    CHVW      
    RESB      
    ZHYPFIO   
    AUSP      
    VBOX      
    JCDS      
    VBAP      
    We don't think these being empty is the problem, but I wanted to mention it just incase it is. 
    Below is the dev_w0 log.  I've been searching Google / SDN / OSS for some of the errors but haven't come up with anything yet.
    Any insight you might have into this would be appreciated.  Thank you.
    ~TJ
    trc file: "dev_w0", trc level: 1, release: "700"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, MJ
    M sysno      79
    M sid        Q60
    M systemid   324 (IBM iSeries with OS400)
    M relno      7000
    M patchlevel 0
    M patchno    172
    M intno      20050900
    M make:      single threaded, Unicode, 64 bit, optimized
    M pid        6396
    M

    M Thu Jan 22 15:12:50 2009
    M  kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
    M  length of sys_adm_ext is 576 bytes
    M  ***LOG Q01=> ThInit, WPStart (Workproc 0 1 6396) [thxxhead.c   1290]
    M  ThInit: running on host USALSAPU
    M  calling db_connect ...
    C  DB4 SQL Reparse Activated

    C Thu Jan 22 15:12:51 2009
    C  R3INLPGM: RmtExeLib from /usr/sap/Q60/SYS/exe/run/DBSLDB4RMT
    C  R3INLPGM: RmtExeLib is KRNQ60700
    C  DBSLENCWT: rc=0, msg=CPF9897 CONCURRENT WRITE IS ENABLED.                                   
    C  DbSl/DB codepage check: table or row not found (db_rc=24) - OK.
    C  === Central DB connect successfull! ===
    C  === Connection settings ===
    C  connected               = TRUE
    C  con_hdl                 = 0
    C  db_handle               = 1
    C  dbhost                  = USALSAPU
    C  rdbname                 =                  
    C  dblib                   = R3Q60DATA
    C  r3sysle_changed         = TRUE
    C  query_compl_reval       = O
    C  dbconnecttype           = L
    C  user                    = Q6079    
    C  qaqqinilib              = Default (QUSRSYS)
    C  dbjobname               = WP00     
    C  dbjobuser               = Q6079    
    C  dbjobno                 = 197762
    C  rmtexelib               = KRNQ60700
    C  parallel_alter_tables   = *OFF
    C  ===========================
    C  Found only default query options in QUSRSYS/QAQQINI.
    C  -
    C  -
    DbSl EGO Structure
    C  -
    C     SAPSYSTEMNAME               = Q60
    C     Character encoding          = UNICODE
    C     process class               = dialog process
    C     workprocess id              = 0
    C     local host                  = USALSAPU
    C     dbhost                      = USALSAPU
    C     rdbname                     =                  
    C     dbname                      = Q60USALSAPU
    C     dblib                       = R3Q60DATA
    C     application server          = DVEBMGS79
    C     Connect type                = LOCAL
    C     pid                         = 6396
    C     wpjobname                   = WP00
    C     wpjobuser                   = Q6079
    C     wpjobno                     = 197762
    C     DB2/400 vers. appl. server  = PASE 1
    C     DB2/400 vers. DB server     = V6R1
    C     da_cache_size               = 100
    C     reopen                      = ON
    C     timeout_retry               = 3
    C     ODP threshold               = 800
    C     ODP commit thresh.          = 810
    C     ODP open thresh.            = 850
    C     QAQQINI library             = Default (QUSRSYS)
    C     Alternate QAQQINI library   = Not specified
    C     use_lobs_for_long           = ON
    C     use_lobs_for_short          = OFF
    C     single_execution_threshold  = 2000
    C     single_execution_reuse      = OFF
    C     keep_tmp_SQLpkgs            = OFF
    C     dbsl_trace                  = OFF
    C     allow_cancel                = Try (Unspecified)
    C     nqe_optimize_method         = O - All I/O (compatibility mode)
    C     nte_list_size               = 10
    C     dbsl_alternate_package      = OFF
    C  -
    B  Connection 0 opened (DBSL handle 0)
    B  Wp  Hdl ConName          ConId     ConState     TX  PRM RCT TIM MAX OPT Date     Time   DBHost         
    B  000 000 R/3              000000000 ACTIVE       NO  YES NO  000 255 255 20090122 151250 USALSAPU       
    M  db_connect o.k.
    M  ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
    I  MtxInit: 0 0 0
    M  SHM_PRES_BUF               (addr: 0x7000002d0000000, size: 120000000)
    M  SHM_ROLL_AREA          (addr: 0x7000002e0000000, size: 268435456)
    M  SHM_PAGING_AREA          (addr: 0x7000002f0000000, size: 335544320)
    M  SHM_ROLL_ADM               (addr: 0x700000310000000, size: 2672386)
    M  SHM_PAGING_ADM          (addr: 0x700000320000000, size: 820256)
    M  ThCreateNoBuffer          allocated 544152 bytes for 1000 entries at 0x700000330000000
    M  ThCreateNoBuffer          index size: 3000 elems
    M  ThCreateVBAdm          allocated 12176 bytes (50 server) at 0x700000340000000
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation std
    X  <ES> Info: use normal pages (no huge table support available)
    X  ES initialized.
    B  dbntab: NTAB buffers created
    B  dbntab: Buffer FTAB(hash header)  (addr: 0x700000360000088, size: 584)
    B  dbntab: Buffer FTAB(anchor array) (addr: 0x7000003600002d0, size: 1280008)
    B  dbntab: Buffer FTAB(item array)   (addr: 0x700000360138ad8, size: 5120000)
    B  dbntab: Buffer FTAB(data area)    (addr: 0x70000036061aad8, size: 122880000)
    B  dbntab: Buffer IREC(hash header)  (addr: 0x700000370000088, size: 584)
    B  dbntab: Buffer IREC(anchor array) (addr: 0x7000003700002d0, size: 1280008)
    B  dbntab: Buffer IREC(item array)   (addr: 0x700000370138ad8, size: 1280000)
    B  dbntab: Buffer IREC(data area)    (addr: 0x7000003702712d8, size: 15360000)
    B  dbntab: Buffer STAB(hash header)  (addr: 0x700000380000088, size: 584)
    B  dbntab: Buffer STAB(anchor array) (addr: 0x7000003800002d0, size: 1280008)
    B  dbntab: Buffer STAB(item array)   (addr: 0x700000380138ad8, size: 1280000)
    B  dbntab: Buffer STAB(data area)    (addr: 0x7000003802712d8, size: 3072000)
    B  dbntab: Buffer TTAB(hash header)  (addr: 0x700000390000088, size: 2976)
    B  dbntab: Buffer TTAB(anchor array) (addr: 0x700000390000c28, size: 1280008)
    B  dbntab: Buffer TTAB(item array)   (addr: 0x700000390139430, size: 3200000)
    B  dbntab: Buffer TTAB(data area)    (addr: 0x700000390446830, size: 23360000)

    B Thu Jan 22 15:12:52 2009
    B  dbstat: table statistics switched on for 84171 tables
    B  dbstat: TABSTAT buffer created (addr: 0x7000003a0000000, size: 41152488)
    B  db_con_shm_ini:  WP_ID = 0, WP_CNT = 23, CON_ID = -1
    B  dbtbxbuf: Buffer TABL  (addr: 0x7000003b0000100, size: 350000000, end: 0x7000003c4dc9480)
    B  dbtbxbuf: Profile: max_objects = 40000, displace = 1, reorg = 1
    B  dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
    B  dbtbxbuf: protect_shm = 0, force_checks = 0
    B  dbtbxbuf: tsize_retry = 104857600
    B  ***LOG BB0=> buffer TABL       started with length 350000000  bytes [dbtbxbuf#3 @ 16202] [dbtbxbuf1620 2]
    B  dbtbxbuf: Buffer TABLP (addr: 0x7000003d0000100, size: 35840000, end: 0x7000003d222e100)
    B  dbtbxbuf: Profile: max_objects = 2000, displace = 1, reorg = 1
    B  dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
    B  dbtbxbuf: protect_shm = 0, force_checks = 0
    B  dbtbxbuf: tsize_retry = 17590656
    B  ***LOG BB0=> buffer TABLP      started with length 35840000   bytes [dbtbxbuf#3 @ 16202] [dbtbxbuf1620 2]
    B  dbtbxbuf: Reading TBX statistics:
    B  dbtbxbuf: 29 object entries precreated
    B  Layout of EIBUF buffer shared memory:
    B  0: 1 * 4 = 4
    B  1: 1 * 416 = 416
    B  2: 23 * 40 = 920
    B  3: 80021 * 48 = 3841008
    B  4: 40000 * 256 = 10240000
    B  5: 80021 * 8 = 640168
    B  6: 1 * 200 = 200
    B  7: 513 * 8 = 4104
    B  8: 262473 * 256 = 67193088
    B  Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
    B  dbexpbuf: Buffer EIBUF (addr: 0x7000003f0000108, size: 81920000, end: 0x7000003f4e20108)
    B  ***LOG BB0=> buffer EIBUF      started with length 80000k     bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
    B  Layout of ESM   buffer shared memory:
    B  0: 1 * 4 = 4
    B  1: 1 * 416 = 416
    B  2: 23 * 40 = 920
    B  3: 4001 * 48 = 192048
    B  4: 2000 * 256 = 512000
    B  5: 4001 * 8 = 32008
    B  6: 1 * 200 = 200
    B  7: 65 * 8 = 520
    B  8: 13500 * 256 = 3456000
    B  Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
    B  dbexpbuf: Buffer ESM   (addr: 0x700000400000108, size: 4194304, end: 0x700000400400108)
    B  ***LOG BB0=> buffer ESM        started with length 4096k      bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
    B  Layout of CUA   buffer shared memory:
    B  0: 1 * 4 = 4
    B  1: 1 * 416 = 416
    B  2: 23 * 40 = 920
    B  3: 40009 * 48 = 1920432
    B  4: 20000 * 256 = 5120000
    B  5: 40009 * 8 = 320072
    B  6: 1 * 200 = 200
    B  7: 193 * 8 = 1544
    B  8: 65617 * 512 = 33595904
    B  Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
    B  dbexpbuf: Buffer CUA   (addr: 0x700000410000108, size: 40960000, end: 0x700000412710108)
    B  ***LOG BB0=> buffer CUA        started with length 40000k     bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
    B  Layout of OTR   buffer shared memory:
    B  0: 1 * 4 = 4
    B  1: 1 * 416 = 416
    B  2: 23 * 40 = 920
    B  3: 4001 * 48 = 192048
    B  4: 2000 * 256 = 512000
    B  5: 4001 * 8 = 32008
    B  6: 1 * 200 = 200
    B  7: 81 * 8 = 648
    B  8: 13500 * 256 = 3456000
    B  Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
    B  dbexpbuf: Buffer OTR   (addr: 0x700000420000108, size: 4194304, end: 0x700000420400108)
    B  ***LOG BB0=> buffer OTR        started with length 4096k      bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
    B  ***LOG BB0=> buffer CALE       started with length 500000     bytes [dbcalbuf#10 @ 2305] [dbcalbuf2305 ]
    B  dbtran INFO (init_connection '<DEFAULT>' [DB400:700.08]):
    B   max_blocking_factor =  20,  max_in_blocking_factor      =  40,
    B   min_blocking_factor =  10,  min_in_blocking_factor      =  10,
    B   prefer_union_all    =   0,  prefer_join                 =   0,
    B   prefer_fix_blocking =   1,  prefer_in_itab_opt          =   1,
    B   convert AVG         =   1,  alias table FUPD            =   1,
    B   escape_as_literal   =   0,  opt GE LE to BETWEEN        =   0,
    B   select *            =0x00,  character encoding          = STD / <none>:-,
    B   use_hints           = abap->1, dbif->0x3, upto->2147483647, rule_in->0,
    B                         rule_fae->0, concat_fae->0, concat_fae_or->0

    M Thu Jan 22 15:12:53 2009
    M  SecAudit(RsauInit): Start init of Security Audit Log for first wp.
    M  SecAudit(RsauCreateShm): New block for Security Audit Log allocated in SCSA
    M  SecAudit(RsauCreateShm): SCSA memory usage: SecAudit = 1152, total = 3048
    M  SecAudit(RsauShmInit): SCSA size................ = 4096
    M  SecAudit(RsauShmInit): addr of SCSA............. = 0x700000040000000
    M  SecAudit(RsauShmInit): addr of RSAUSHM.......... = 0x700000040000768
    M  SecAudit(RsauShmInit): addr of RSAUSLOTINFO..... = 0x7000000400007a0
    M  SecAudit(RsauShmInit): addr of RSAUSLOTS........ = 0x7000000400007ac
    M  SecAudit(RsauShmInit): SHM version.............. = 5
    M  SecAudit(RsauShmInit): SHM Slot version......... = 2
    M  SecAudit(RsauShmInit): RSAU active.............. = 0
    M  SecAudit(RsauShmInit): number of slots possible. = 10
    M  SecAudit(RsauShmInit): number of slots requested = 2
    M  SecAudit(RsauShmInit): number of slots used..... = 2
    M  SecAudit(RsauShmInit): user selection........... = 0
    M  SecAudit(RsauShmInit): max size of one file..... = 0 KB
    M  SecAudit(RsauShmInit): max size of all files.... = 102400 KB
    M  SecAudit(RsauGetCurrentProfile): Init of shared memory completed
    M  SecAudit(RsauGetCurrentProfile): Security Audit Log not active
    M  SsfSapSecin: automatic application server initialization for SAPSECULIB
    N  SsfSapSecin: Looking for PSE in database
    N  SsfPseLoad: started...(path=/usr/sap/Q60/DVEBMGS79/sec, AS=USALSAPU, instanceid=79)
    N  SsfPseLoad: Downloading file /usr/sap/Q60/DVEBMGS79/sec/SAPSYS.pse (client:    , key: SYSPSE, len: 1872)
    N  SsfPseLoad: ended (1 of 1 sucessfully loaded, 1 checked...
    N  MskiCreateLogonTicketCache: Logon Ticket cache created in shared memory.
    N  MskiCreateLogonTicketCache: Logon Ticket cache pointer registered in shared memory.
    M  CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    M  CCMS: AlMsUpload called by wp 0.
    M  CCMS: AlMsUpload successful for /usr/sap/Q60/DVEBMGS79/log/ALMTTREE (0 MTEs).
    M  CCMS: start to initalize 3.X shared alert area (first segment).

    S Thu Jan 22 15:12:54 2009
    S  *** init spool environment
    S  initialize debug system
    T  Stack direction is downwards.
    T  debug control: prepare exclude for printer trace
    T  new memory block 0x18499b440
    S  spool kernel/ddic check: Ok
    S  using table TSP02FX for frontend printing
    S  2 spool work process(es) found
    S  frontend print via spool service enabled
    S  printer list size is 400
    S  printer type list size is 50
    S  queue size (profile)   = 300
    S  hostspool list size = 3000
    S  option list size is 30
    S      found processing queue enabled
    S  found spool memory service RSPO-RCLOCKS at 0x700000460000070
    S  doing lock recovery
    S  setting server cache root
    S  found spool memory service RSPO-SERVERCACHE at 0x700000460000740
    S    using messages for server info
    S  size of spec char cache entry: 297032 bytes (timeout 100 sec)
    S  size of open spool request entry: 2272 bytes
    S  immediate print option for implicitely closed spool requests is disabled

    A  -PXA--
    A  PXA INITIALIZATION

    A Thu Jan 22 15:12:55 2009
    A  PXA: Locked PXA-Semaphore.
    A  System page size: 4kb, total admin_size: 139532kb, dir_size: 34808kb.
    A  Attached to PXA (address 0x700000470000000, size 1998848K, 4 fragments of 464832K )
    A  abap/pxa = shared unprotect gen_remote
    A  PXA INITIALIZATION FINISHED
    A  -PXA--

    A  ABAP ShmAdm attached (addr=0x7000000b0577000 leng=20955136 end=0x7000000b1973000)
    A  >> Shm MMADM area (addr=0x7000000b0a50fa8 leng=244096 end=0x7000000b0a8c928)
    A  >> Shm MMDAT area (addr=0x7000000b0a8d000 leng=15622144 end=0x7000000b1973000)
    A  RFC Destination> destination USALSAPU_Q60_79 host USALSAPU system Q60 systnr 79 (USALSAPU_Q60_79)
    A  RFC Options> H=USALSAPU,S=79,d=2,
    A  RFC FRFC> fallback activ but this is not a central instance.
    A   
    A  RFC rfc/signon_error_log = -1
    A  RFC rfc/dump_connection_info = 0
    A  RFC rfc/dump_client_info = 0
    A  RFC rfc/cp_convert/ignore_error = 1
    A  RFC rfc/cp_convert/conversion_char = 23
    A  RFC rfc/wan_compress/threshold = 251
    A  RFC rfc/recorder_pcs not set, use defaule value: 2
    A  RFC rfc/delta_trc_level not set, use default value: 0
    A  RFC rfc/no_uuid_check not set, use default value: 0
    A  RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
    A  RFC Method> initialize RemObjDriver for ABAP Objects
    M  ThrCreateShObjects          allocated 47822 bytes at 0x7000004f0000000

    N Thu Jan 22 15:12:56 2009
    N  SsfSapSecin: PSE /usr/sap/Q60/DVEBMGS79/sec/SAPSYS.pse found!

    N  =================================================
    N  === SSF INITIALIZATION:
    N  ===...SSF Security Toolkit name SAPSECULIB .
    N  ===...SSF trace level is 0 .
    N  ===...SSF library is /usr/sap/Q60/SYS/exe/run/libsapsecu.o .
    N  ===...SSF hash algorithm is SHA1 .
    N  ===...SSF symmetric encryption algorithm is DES-CBC .
    N  ===...completed with return code 5.
    N  =================================================
    N  MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
    N  MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
    M  JrfcVmcRegisterNativesDriver o.k.
    W  =================================================
    W  === ipl_Init() called
    W    ITS Plugin: Path dw_gui
    W    ITS Plugin: Description ITS Plugin - ITS rendering DLL
    W    ITS Plugin: sizeof(SAP_UC) 2
    W    ITS Plugin: Release: 700, [7000.0.172.20050900]
    W    ITS Plugin: Int.version, [33]
    W    ITS Plugin: Feature set: [17]
    W    ===... Calling itsp_Init in external dll ===>
    W  === ipl_Init() returns 0, ITSPE_OK: OK
    W  =================================================
    N  VSI: WP init in ABAP VM completed with rc=0

    E Thu Jan 22 15:12:58 2009
    E  Replication is disabled
    E  EnqCcInitialize: local lock table initialization o.k.
    E  EnqId_SuppressIpc: local EnqId initialization o.k.
    E  EnqCcInitialize: local enqueue client init o.k.

    M Thu Jan 22 15:13:03 2009
    M  SosICreateNewAnchorArray: sos_search_anchor_semantics = 1

    A Thu Jan 22 15:13:07 2009
    A  *** ERROR => RFC ======> cannot open SAPGUI
    [abrfcio.c    8185]
    A  RFC 1729  CONVID 62379446
    A   * CMRC=0 DATA=0 STATUS=0 SAPRC=0 exec_sapgui cannot open SAPGUI
    A  RFC> ABAP Programm: SAPLSLDAG (Transaction: )
    A  RFC> User: DDIC (Client: 000)
    A  RFC> Destination: SERVER_EXEC (handle: 2, , )
    A  RFC SERVER> RFC Server Session (handle: 1, 62377117, {4978D392-D34E-190F-E100-80020A001114})
    A  RFC SERVER> Caller host:
    A  RFC SERVER> Caller transaction code:  (Caller Program: SLDAPPL_SERV)
    A  RFC SERVER> Called function module: SLDAG_GET_COMPILED_BITS
    A  *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1738
    FUNCTION: 'exec_sapgui'
    cannot open SAPGUI
    PROG =rfcexec USALSAPU sapgw79 62379446 IDX=2
    [abrfcio.c    8185]
    A  *** ERROR => RFC ======> FUNCTION: 'exec_sapgui'
    cannot open SAPGUI
    [abrfcio.c    8185]
    A  RFC 1729  CONVID 62382527
    A   * CMRC=0 DATA=0 STATUS=0 SAPRC=0 exec_sapgui FUNCTION: 'exec_sapgui'
    A  cannot open SAPGUI
    A  RFC> ABAP Programm: SAPLSLDAG (Transaction: )
    A  RFC> User: DDIC (Client: 000)
    A  RFC> Destination: SERVER_EXEC (handle: 2, , )
    A  RFC SERVER> RFC Server Session (handle: 1, 62381506, {4978D397-D34E-190F-E100-80020A001114})
    A  RFC SERVER> Caller host:
    A  RFC SERVER> Caller transaction code:  (Caller Program: SLDAPPL_SERV)
    A  RFC SERVER> Called function module: SLDAG_GET_COMPILED_BITS
    A  *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1738
    FUNCTION: 'exec_sapgui'
    FUNCTION: 'exec_sapgui'
    cannot open SAPGUI
    PROG =rfcexec USALSAPU sapgw79 62382527 IDX=3
    [abrfcio.c    8185]

    A Thu Jan 22 15:13:14 2009
    A  *** ERROR => RFC ======> FUNCTION: 'exec_sapgui'
    FUNCTION: 'exec_sapgui'
    cannot open SAPGUI
    [abrfcio.c    8185]
    A  RFC 1729  CONVID 62392457
    A   * CMRC=0 DATA=0 STATUS=0 SAPRC=0 exec_sapgui FUNCTION: 'exec_sapgui'
    A  FUNCTION: 'exec_sapgui'
    A  cannot open SAPGUI
    A  RFC> ABAP Programm: SAPLSLDAG (Transaction: )
    A  RFC> User: DDIC (Client: 000)
    A  RFC> Destination: SERVER_EXEC (handle: 3, , )
    A  RFC SERVER> RFC Server Session (handle: 1, 62381506, {4978D397-D34E-190F-E100-80020A001114})
    A  RFC SERVER> Caller host:
    A  RFC SERVER> Caller transaction code:  (Caller Program: SLDAPPL_SERV)
    A  RFC SERVER> Called function module: SLDAG_GET_COMPILED_BITS
    A  *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1738
    FUNCTION: 'exec_sapgui'
    FUNCTION: 'exec_sapgui'
    FUNCTION: 'exec_sapgui'
    cannot open SAPGUI
    PROG =rfcexec USALSAPU sapgw79 62392457 IDX=6
    [abrfcio.c    8185]

    B Thu Jan 22 15:13:16 2009
    B  table logging switched on for client '010'

    M Thu Jan 22 15:13:22 2009
    M  AS400_API connected to 'USALSAPU'. DBJob: (197789/QUSER     /QXDARECVR )M  *** ERROR => AS400_API (APICODE 23) failed with SY-SUBRC = 9 [abas4api.c   1548]
    M  *** ERROR => Cannot open file '/usr/sap/transD60/config/infoapar.610' [             0]
    A  A  TH VERBOSE LEVEL FULL
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
    A  ** RABAX: level LEV_RX_ROLLBACK entered.
    A  ** RABAX: level LEV_RX_ROLLBACK completed.
    A  ** RABAX: level LEV_RX_DB_ALIVE entered.
    A  ** RABAX: level LEV_RX_DB_ALIVE completed.
    A  ** RABAX: level LEV_RX_HOOKS entered.
    A  ** RABAX: level LEV_RX_HOOKS completed.
    A  ** RABAX: level LEV_RX_STANDARD entered.
    A  ** RABAX: level LEV_RX_STANDARD completed.
    A  ** RABAX: level LEV_RX_STOR_VALUES entered.
    A  ** RABAX: level LEV_RX_STOR_VALUES completed.
    A  ** RABAX: level LEV_RX_C_STACK entered.
    A  ** RABAX: level LEV_RX_C_STACK completed.
    A  ** RABAX: level LEV_RX_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_INTERFACES entered.
    A  ** RABAX: level LEV_RX_INTERFACES completed.
    A  ** RABAX: level LEV_RX_GET_MESS entered.
    A  ** RABAX: level LEV_RX_GET_MESS completed.
    A  ** RABAX: level LEV_RX_INIT_SNAP entered.
    A  ** RABAX: level LEV_RX_INIT_SNAP completed.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
    A  ** RABAX: level LEV_RX_WRITE_SNAP entered.
    A  ** RABAX: level LEV_SN_END completed.
    A  ** RABAX: level LEV_RX_SET_ALERT entered.
    A  ** RABAX: level LEV_RX_SET_ALERT completed.
    A  ** RABAX: level LEV_RX_COMMIT entered.
    A  ** RABAX: level LEV_RX_COMMIT completed.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
    A  ** RABAX: level LEV_RX_RESET_PROGS entered.
    A  ** RABAX: level LEV_RX_RESET_PROGS completed.
    A  ** RABAX: level LEV_RX_STDERR entered.
    A  Thu Jan 22 15:13:22 2009

    A  ABAP Program SAPMSYST                                .
    A  Source SAPMSYST                                 Line 1770.
    A  Error Code DYNPRO_NOT_FOUND.
    A  Module  $Id: //bas/700_REL/src/krn/dynp/dybas.c#6 $ SAP.
    A  Function dyrdyp.c Line 545.
    A  ** RABAX: level LEV_RX_STDERR completed.
    A  ** RABAX: level LEV_RX_RFC_ERROR entered.
    A  ** RABAX: level LEV_RX_RFC_ERROR completed.
    A  ** RABAX: level LEV_RX_RFC_CLOSE entered.
    A  ** RABAX: level LEV_RX_RFC_CLOSE completed.
    A  ** RABAX: level LEV_RX_IMC_ERROR entered.
    A  ** RABAX: level LEV_RX_IMC_ERROR completed.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE entered.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE completed.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
    A  ** RABAX: level LEV_RX_ERROR_SAVE entered.
    A  ** RABAX: level LEV_RX_ERROR_SAVE completed.
    A  ** RABAX: level LEV_RX_ERROR_TPDA entered.
    A  ** RABAX: level LEV_RX_ERROR_TPDA completed.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
    A  ** RABAX: level LEV_RX_END entered.
    A  ** RABAX: level LEV_RX_END completed.
    A  ** RABAX: end no http/smtp
    A  ** RABAX: end RX_GOTO_RABAX
    A  Dynpro does not exist.

    A  TH VERBOSE LEVEL FULL
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
    A  ** RABAX: level LEV_RX_ROLLBACK entered.
    A  ** RABAX: level LEV_RX_ROLLBACK completed.
    A  ** RABAX: level LEV_RX_DB_ALIVE entered.
    A  ** RABAX: level LEV_RX_DB_ALIVE completed.
    A  ** RABAX: level LEV_RX_HOOKS entered.
    A  ** RABAX: level LEV_RX_HOOKS completed.
    A  ** RABAX: level LEV_RX_STANDARD entered.
    A  ** RABAX: level LEV_RX_STANDARD completed.
    A  ** RABAX: level LEV_RX_STOR_VALUES entered.
    A  ** RABAX: level LEV_RX_STOR_VALUES completed.
    A  ** RABAX: level LEV_RX_C_STACK entered.

    A Thu Jan 22 15:13:23 2009
    A  ** RABAX: level LEV_RX_C_STACK completed.
    A  ** RABAX: level LEV_RX_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_INTERFACES entered.
    A  ** RABAX: level LEV_RX_INTERFACES completed.
    A  ** RABAX: level LEV_RX_GET_MESS entered.
    A  ** RABAX: level LEV_RX_GET_MESS completed.
    A  ** RABAX: level LEV_RX_INIT_SNAP entered.
    A  ** RABAX: level LEV_RX_INIT_SNAP completed.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
    A  ** RABAX: level LEV_RX_WRITE_SNAP entered.
    A  ** RABAX: level LEV_SN_END completed.
    A  ** RABAX: level LEV_RX_SET_ALERT entered.
    A  ** RABAX: level LEV_RX_SET_ALERT completed.
    A  ** RABAX: level LEV_RX_COMMIT entered.
    A  ** RABAX: level LEV_RX_COMMIT completed.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
    A  ** RABAX: level LEV_RX_RESET_PROGS entered.
    A  ** RABAX: level LEV_RX_RESET_PROGS completed.
    A  ** RABAX: level LEV_RX_STDERR entered.
    A  Thu Jan 22 15:13:23 2009

    A  ABAP Program SAPMS380                                .
    A  Source                                          Line 0.
    A  Error Code DYNPRO_NOT_FOUND.
    A  Module  $Id: //bas/700_REL/src/krn/dynp/dybas.c#6 $ SAP.
    A  Function dyrdyp.c Line 545.
    A  ** RABAX: level LEV_RX_STDERR completed.
    A  ** RABAX: level LEV_RX_RFC_ERROR entered.
    A  ** RABAX: level LEV_RX_RFC_ERROR completed.
    A  ** RABAX: level LEV_RX_RFC_CLOSE entered.
    A  ** RABAX: level LEV_RX_RFC_CLOSE completed.
    A  ** RABAX: level LEV_RX_IMC_ERROR entered.
    A  ** RABAX: level LEV_RX_IMC_ERROR completed.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE entered.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE completed.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
    A  ** RABAX: level LEV_RX_ERROR_SAVE entered.
    A  ** RABAX: level LEV_RX_ERROR_SAVE completed.
    A  ** RABAX: level LEV_RX_ERROR_TPDA entered.
    A  ** RABAX: level LEV_RX_ERROR_TPDA completed.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
    A  ** RABAX: level LEV_RX_END entered.
    A  ** RABAX: level LEV_RX_END completed.
    A  ** RABAX: end no http/smtp
    A  ** RABAX: end RX_GOTO_SAPDEXT
    A  Dynpro does not exist.

    M  ThIUsrDel: th_rollback_usrdelentry = 1
    M  ***LOG R47=> ThResFree, delete (001024) [thxxmode.c   1384]

    S Thu Jan 22 15:14:20 2009
    S  found spool memory service RSPO-ACTIONS at 0x70000046000a478

    Hi TJ,
    you are having definetely other issues, than the ones that might be caused by clrpfm of the tables above ...
    But, based on that data, I do not know which ones ;-(
    There are dynpro tables like dynpload or d3456t or so not proper ...
    Regards
    Volker Gueldenpfennig, consolut international ag
    http://www.consolut.net - http://www.4soi.de - http://www.easymarketplace.de

  • 3F0 Error, Hard drive does not exist on Pavilion dv4.

    I have a Pavilion Dv4 with windows 7 OS. 
    When I boot up the computer it tells me "No bootable device -- insert boot disk and press any key"
    I have done the F2 system diagnostics and once I get there click the Hard Disk Test which brings me to where it says "Hard Disk Not Exist. Press <ESC> to continue" and prcoceed to hit Esc where it tells me the Hard disk test failed and "Boot device not found (3F0)" 
    After which I restarted and hit F10 to get to the BIOS which I then went to Diagnostics and tried to run the "Primary Hard Disk Self Test" and then it says "Hard Disk Not Exist" still. The memory test runs fine passes and gives me no errors. 
    I have also done a hard reset and have re-seated the hard drive and NOTHING has worked. Help would be appreciated because this has been happening for a VERY long time (just happened to be after the warranty ran out, convienent eh?) and I lucky had my fiances older laptop which is very old. 

    The notebook is not able to recognize the Hard Drive.
    Are you shure that warranty of your PC has ended? Keep in mind that warranty starts from the date that you buy the PC.
    If the Hard Drive test shows that the test failed, you will have to get it replaced. I suggest you to call HP technical support and get their advice on the available options for service.
    I'm an HP Employee.
    The opinions expressed here are my personal opinions, not of HP.
    Click on Thumbs up if my post helped you.
    Make it easier for other people to find solutions, by marking an answer “Accept as Solution” if it solves your problem.

  • Error: File does not exist (while trying to get Petstore and demos to run)

    Hi all,
    I have been trying in vain to get the Petstore demo and other servlet demo HelloWorld to run. It seems to install okay cause it creates the directories and extracts the .ear or .war files. My problem is connecting to the application. When I run http://my.host:7778/estore or http://my.host/7778/HelloWorld/HelloWorld I get and error in the Apache error_log that says: File does not exist: c:/oracle/components/apache/apache/htdocs/helloworld/helloworld and File does not exist: c:/oracle/components/apache/apache/htdocs/estore
    I have looked and searched everywhere for help but to no avail. Under the WebModule the URL Binding is /HelloWorld and /estore.
    Please help me!!! I am going crazy with this.
    Thanks,
    Grant
    PS. I am running 9iAS 9.0.2.0.1 and everything is on 1 Windows 2000 (sp1) machine. Infrastructure and Components in separate dirs with port 7777 and 7778 for each.

    I'm having the same problem under a solaris system did anyone ever find the solution to this problem. For some reason the server just wants to use the document root instead of the deployed application directory.

  • Boot device not found, hard disk not exist.... does that mean my computer is dead?

    Suspecting that Im in a world of hurt here. I tried turning on my computer and it says "boot device not found" - run in test failed... when I hit F4 and run a hard disk test it says "hard disk not exist". The memory test passes, but under the boot device not found it says in blue "please install an operating system on your hard disk"... and to make matters worse it's making some funny noises when it tries to boot.
    Is there any hope at all that this computer will work again? Is there any chance that any of the things I had on my hard disk can be recovered?
    This question was solved.
    View Solution.

    You're very welcome, Jonathan.
    dv5 still isn't enough info for me to provide the service manual (in case there are differerent ones for the different dv5 models).
    However here is the link to the service manual I randomly pulled.
    http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01550108/c01550108.pdf
    Assume it is safe to say all dv5 models come with SATA notebook drives.
    So, if you want to spring for $15, you can get this enclosure which apparently has very good reviews.
    http://www.newegg.com/Product/Product.aspx?Item=N82E16817182138
    From what you are describing (noise and stuff), I would say you don't have much of a chance to recover data but that is up to you if you want to try the enclosure or not.
    Here is what I recommend:
    Yank the hard drive, and power on the notebook.
    If the odd noise you heard is gone, then you can pretty much safely assume the drive was the cause, and that replacing the drive, and reinstalling the operating system will solve the issue.
    If the noise is still there, then there could be another issue, and it might be risky throwing good money after bad.
    Paul

  • Why does PD says model doesn't exist in repository, when trying to check in

    Hi
    I have a checked out a PDM to my local directory.  I have made some changes and checked the model back into repository successfully.  Next day I had to make one more change to my local copy which i did (without doing an explicit checkout) now When i try to check it back in again, PD says model does not exist?  Is it a must that we always have to checkout before making a change ?
    attached are the screen shots of my local directory and from the repository.  How does PD determine whether or not a model exist in repository?
    thank you
    Krishna

    When a model exists in the repository, the model's metadata holds the unique identifier given to it by the repository; e.g. A89B0620-0379-482B-83C8-88B346BBF471.
    If your model is in a project, you can display the 'repository identifier' on model symbols in project diagrams, also in List Reports that contain models.
    A quick way of verifying that a model is in the repository is to look at the general tab on the model properties - it should have a 'repository' field alongside the 'version' field.
    When you check in the model, it uses this identifier to find the model in the repository. I have seen cases (in 16.5.0) where the checked-out model didn't have this identifier in the header information (visible if you open the model file in an XML editor - do NOT edit it), so it's listed as 'not in repository'.

Maybe you are looking for