Sugg on how to define load time -specific time instance across GEO location

Hi Good Morning,
How to define the loading instance of time with respect to different Geographic Loacations. If we consider daily load how would time difference play a role here, bcos all business in different regions will not close if we consider to load based on one regions time. so can any body help me out how to define that time of loading and basing all Geographic regions into consideration or what is the best way to take it up.
Thanksin Advance
- Venkat

Hi Venkat,
What are the Geo's that you are considering?
Things to keep in mind while deciding the load times & the no. of times your Process Chains have to run:
1. Find out which are the most important/ critical process chains which the Business requires.
2. Find out their respective load times (how long does it take to finish executing completely)
3. APAC Region is always the first to start working. So, better would be that you schedule your chains by say 20GMT or a little earlier for this region.
4. EMEA region is the next. For this you can have your chains scheduled for 3 or 4 GMT.
5. US region - schedule the chains for 10 GMT or so.
6. Have different variants scheduled at different times & include your process chains in hose variants.
These are just general views. It will vary from case to case.
Hope this helps.
Regards
Vishal

Similar Messages

How To Restore From A Specific Time From Ovi Sync?

Reall need help here, I lost all my contacts & worst part of it - OVI Syncs my EMPTY contact book & when restored, well you know what happens...AAARRRGGHHH!!! Is there a way I can restore back my contacts at a specific time? Ovi sync my empty contact book at 1555. I need to restore to a previous time say around noon 1200+ (because my settings is set to daily sync at 12 noon) HEEELP NOKIA!! Using N8 v22, Location - Malaysia.

Can the new 27 inch iMac restore EVERYTHING to how it was from the original 27 inch imac? Would all my photos from iPhoto be restored? My music/movies from itunes?
Yes.
An application called Setup Assistant will appear on the new iMac at startup to ask if you if want to setup the iMac from a Time Machine backup. The "new" iMac will look just like the "old" iMac when you do this.

Noob question - How can I copy a specific time sequence from an audio file

Hello, I want to chop up an audio file
into time-specific lengths. How can I accomplish this precisely? I know I can position the playhead precisely but
how can I copy a chunk of an audio file, for example, if I wanted the segment from 00:02:34.7
to 00:05:42.1? Is my only option the "drag" selection of the
Time Selection tool? Is there not an option to do some start and end point setting so I can be as arbitrarily precise as necessary?
Thanks in advance for any help.

Copy from Messages.
Paste into Notes.
Copy the desired sentence from Notes.
Paste as desired.

How can i load a specific CSS style sheet for Safari?

Okay, So I have some structure issues when viewing my website on Safari compared to Firefox. Is there a way to put a code in the <head> tag to load a specific CSS style sheet for Safari like you can do with IE?
Thanks.

I took a screenshot of your page from Firefox (shown below). I assume you're seeing the same problem in Safari. If you increase text size one click, the keyboard image drops below the #contact division.
1) Height is a restiction in all browsers except IE. Avoid using height values on containers with text in them. If needed to show a background image, use the min-height property.
2) Fix your code errors. Some browsers are very sensitive to errors.
3) Your #content lacks cohesion. You need 3 columns, each with a width in pixels. Or simply use a 3-column table.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com

How can i set a specific time for a transaction code to be run?

I want to know if a certain Transaction Code (not only the customized tcodes) could only be run on a specific time (ie. 4pm to 6am only)

There are two ways to achieve the purpose you wanted:
1. If the work to be done by this Tcode can be processed automatically without any interactive session (dialog user) then I would suggest it to process as Batch Job in the time period you specified. And make sure that none of the users are not having corresponding authorization to execute the same task in foreground.
2. If you need the Tcode to be executed only when you can monitor then the best way is to monitor the users containing the Tcode through SM20 audit log as a Mitigating control.
No such facility is currently available to protect a Tcode for a particular time interval in a day. You may write a message to SAP for suggestion.
regards,
Dipanjan

How to start video from specific time

hey frnds,
how can we start video from given time in osmf player and also how to ad cue point to stop it

I'd like to do something similar , i.e load a streaming resource but have it play from time "n" rather than time 0.
I looked at clipStart, but that seems to truncate the video to start from time n, in other words when I use clipStart, I dont seem to be able to seek to a point between 0 and "n"
Using play() and then seek() to "n", seems to work but causes it to buffer twice, which looks really bad to a user who just wants to start the video from time "n".
Is there another way to achieve this?
Thanks,
- abey

Ical - how to view from a specific time of day

Hi y'all
- Yes I did try to search and find the answer but all I got was guff about quicktime.
I have upgraded from an ooooooold mac running OS X 10.3 and am now up to speed with a Macbook Pro running the latest OS X and iCal Version 2.0.5.
On the old iCal I set up the preferences thus :-
Day starts at 07:00 day ends at 22:00 show 12 hours at a time.
When I opened old iCal it started from 07:00
On the new iCal any part of my day not specified is greyed but it now opens from 00:00.
Not a big deal but only having a 15" screen it means I have to keep scrolling down to 07:00.
I don't need the default view to start from 00:00 as I know what I'm doing - sleeping or clubbing.
If I have set iCal to display 12 hours then why does it display 24? How can I get it to just display the hours between 07:00 - 22:00?
Appreciated.

I have the same problem. Did you receive any positive responses?

How to Define MQ message expire time in OSB Business service.

Hi,
Please let me know the option in OSB business service to set the expiration time for MQ messages. Is it possible?
Thanks,
karthik.

http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/mqtransport/transport.html
transport header "Expiry"
i hope it works :o)

How to define files for "design time" use

If you want to use a CSS file locally for the "design time
only" feature is it necessary to include it in the header of the
page, in addition to using the "use at design time" definition in
the contextual menu?
I'm having trouble getting the "use at design time" feature
working and I want to make sure that my setup is correct.
The help function and a search of the forum don't reveal an
answer to the question so any pointers to references would be
appreciated.
Thanks.

dorich2,
> If you want to use a CSS file locally for the "design
time only" feature is it
> necessary to include it in the header of the page, in
addition to using the
> "use at design time" definition in the contextual menu?
No.
> I'm having trouble getting the "use at design time"
feature working and I want
> to make sure that my setup is correct.
Design-time Style Sheets (DTSS) are implemented as "User"
style sheets.
More info here:
http://www.w3.org/TR/CSS21/cascade.html#cascade
"By default, rules in an author's style sheet override those
in a user's
style sheet. However, for balance, an '!important'
declaration takes
precedence over a normal declaration. Both author and user
style sheets
may contain '!important' declarations, and user '!important'
rules
override author '!important' rules."
http://www.w3.org/TR/CSS21/cascade.html#important-rules
So, give your DTSS properties the !important modifier to
always override
what's on your page.
Hope this helps,
Randy

How to set a specific time zone for time channel in DIADEM

Hi,
I'd like to know how to autmatically set a specific time zone for time channels in DIADEM.
For example, I have stored data with corresponding time channel in UTC time on a disk which was collected in another time zone. Now I want to analyze this data and I want the time channel to show the local time in the time zone where the data was collected, and not the time in the local time zone where the computer is located.
The time channel should also take site local summer/winter time into account. Now I'm running a script that handles it for me which adds or subtract hours according to my input. The problem is that I'm handling data from several different time zones and I'm not located in any of them and when you're running a lot of data over a greater time period, it's easy to make mistakes, especially when it comes to summer/winter time. Is there a any clever solution to this already implemented in Diadem that I have not found?

Hi hj77,
No, I'm sorry, DIAdem has no time zone functionality at all. I'm afraid you have no choice in DIAdem but to keep running your scripts. Summer and Winter time are truly tricky, because the rules for when the changes occur are different in different countries and states within countries and also can change from year to year within the SAME country (as they did in the US a few years ago).
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Scheduling specific time of day for automatic software updates

How can one schedule a specific time of day (i.e. between 11:01 pm to 5.59 am when I have unlimited download availability) for an iMac to search for automatic software updates? System preferences only offer frequency, but no time option. If it is possible to schedule a specific time, will invoking the feature override the sleep function, wake up the machine and perform the software update and then let the machine go back to "sleep?" Thank you for all your help.

to clarify barney's suggestion, the following terminal command will download all available updates and put them in your Downloads folder.
softwareupdate -d --all
so what you need to do is this.
1. turn off automatic software update in software update system preferences.
2. make a cron or a launch daemon to run the above terminal command periodically at the time of your choosing. to make a launch daemon I recommend using lingon http://tuppis.com/lingon/
The daemon will only run if the computer is not asleep at the scheduled time so you might want to set to to wake/start shortly before that. this is done in system preferences->energy saver->schedule.
to install the updates once they are downloaded double-click on the pkg files and follow the instructions.

Meals Per Diem by time for trip - start time & End time of the trip

Hi,
Please let me know if the Meal per Diem by time for trip - - start time & End time of the trip is active or Inactive in SAP 6.0 .
Can Meal per Diem by time for trip (not by hours) be configured in SAP Travel management.
Please let me know how it can be configured - please provide an insight & details how it can be configured.
We are trying to implement Meals Per Diem by time to European countries .
Thanks in advance.
Best regards,
Sekhar.

Hi,
Yes Meals per diem can be configured based on time of trip.. (V_T706H)
Following help would be helpful for you..
Regards,
Muhammad Umer
Define Per Diems for Meals/Time
In Travel Accounting you can do accounting of meals per diems for exact times.
The meals per diems/time are distinguished using the following control parameters:
trip country
trip region
enterprise-specific trip type
These three control parameters are active during accounting.
For every possible combination of the allowed entry values of the control parameters defined by you in the section Control parameters for trip costs, a meals per diem/time must be defined.
statutory trip type
trip activity type
statutory reimbursement group for meals/accommodations
enterprise-specific reimbursement group for meals/accommodations
For each trip provision variant, you can determine how these control parameters influence the determination of reimbursement rates for meals per diems.
If these control parameters are active, you have to define a meals per diem for each combination of all active control parameters.
day
The meals per diems/time can be scaled according to the total number of trip days. The valuation of the trip duration is carried out according to time, the entries are to be made correspondingly.
For first/last trip day the following is required:
number of days 1: time interval in which the meals per diem is                 reimbursed.
Example:
08.00 - 09.00 75.20 ATS
If a trip starts before 8.00 a.m. and ends after 09.00 a.m., a meals per diem of 75.20 ATS is reimbursed.
For entire trip days you require:
number of days 99: complete time interval from 00.00 hours to 24.00 hours.
For entire trip days with stopovers you require:
number of days 98: Point in time up to which per-diem amount is                    reimbursed.
                   In general, an interval of <Zone
                   minute is enough.
Example:
08.00 - 08.01 100.00 ATS for destination France
For a stay in France from 00.00 hours to 08.30 hours, a meals per diem /time of 100.00 ATS is reimbursed.
For a stay in Germany from 8:31 hours to 24.00 hours, you access the corresponding meals per diem/time for Germany.
Validity interval in minutes
The meals per diem/time are defined for a specific time in the system via the control parameters, a validity interval in minutes, via a validity period and the reimbursement amounts.
Note
If the reimbursement rates in a meals per diem/time are changed, you do not need to create a new meals per diem/time, but rather you can delimit the previously valid meals per diem/time in regard to time using a delimitation date. When you do this, a new identical meals per diem/time which is valid as of the entered date, is generated. For this new meals per diem/time, you need then only change the reimbursement amounts.
Requirements
You need to have defined the control parameters which you intend to use for modifying the meals per diem/time in the section Control parameters for trip costs.
Recommendation
SAP recommends that you set the end date of the validity period of a meals per diem/time to the date 31.12.9999, since the end date cannot be changed at a later stage.
In this way no restrictions are placed on delimiting.
Activities
To define a meals per diem/time, proceed as follows:
1. Choose the trip provision variant you require.
2. Assign control parameters according to your requirements.
Note that you cannot change the control parameters at a later date.
3. In the field Time from, enter the time that you wish to define as the start of the exact (to-the-minute) validity interval.
4. In the field Time to, enter the time which you wish to define as the end of the exact (to the-minute) validity interval.
5. Define a validity period via the fields Start and End.
Note that you cannot change the end date at a later stage.
6. In the field Currency, assign the required currency for the reimbursement amounts.
7. Enter the tax-free reimbursement amount in the field Tax-free amount.
8. Enter the enterprise-specific reimbursement amount in the field reimbursement amount.
9. Enter the reimbursement amount which you charge a customer in the field Amount for customers.
Note
At present, this amount is not evaluated by the standard programs.
To delimit a meals per diem/time, proceed as follows:
1. Select the required meals per diem/time in the overview screen.
2. Choose Goto -> Detail.
You are now in the detail screen.
3. Choose Edit -> Delimit validity.
4. Enter the new validity date in the field Valid from.
5. Press the function key Continue.
6. Check the tax-free reimbursement amount in the field Tax-free amount and change it if necessary.
7. Change the enterprise-specific reimbursement amount in the field Reimbursement amount if necessary.
8. If necessary, change the reimbursement amount in the field Amount for customers.
Note
At present, this amount is not evaluated by the standard programs.

Can you schedule pages to load at a specific time?

Is it possible to schedule a page to load at a specific time/date? For example, I need my home page to update at 9am on Friday, but I will be out of the office at that time, can Dreamweaver do it for me automatically?
I am using Dreamweaver CS3 on a Mac running OSX 10.4.11.
Thanks,
Elliott

Here's a very simple sample using php. As its Thursday you will get the message 'This is Thursday and our prices are reduced by 25%' any other day and you will get the message '10% discount today'
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Untitled Document</title>
<?php
$day = date('l');
?>
<style type="text/css">
#thursdayOffer {
width: 400px;
margin: 0 auto;
border: 2px solid #900;
text-align: center;
#normalOffer {
width: 400px;
margin: 0 auto;
border: 2px solid #900;
text-align: center;
</style>
</head>
<body>
<?php
if ($day == "Thursday") {
echo "<div id='thursdayOffer'><p>This is Thursday and our prices are reduced by 25%</p></div>";
else {
echo "<div id='normalOffer'><p>10% discount today</p></div>";
?>
</body>
</html>
Depending on how complex you want to get.....you may need to get the information from a database.

How to address a specific time in VOD for iOS

Using Flash and RTMP it's easy to go to a specific time in a VOD stream served from AMS using the seek method.
Is there similar ability to seek to a specific time in VOD delivered to Safari on iOS? The native video player provides a currentTime method, but I've not seen documentation anywhere to suggest currentTime or another method to provide rapid and accurate time based access from AMS.
FWIW, Wowza documentation provides an answer:
http://www.wowza.com/forums/content.php?326-How-to-specify-a-play-start-time-and-duration- for-HTTP-streaming
TIA,
RT

Nitin, the link you provided is a bit better than nothing, but it refers to the AVPlayer object in applications, rather than iOS delivered data. In our experience currentTime is a settable property for the native video player in mobile Safari, using a normal progressive uploaded stream, as the documentation shows:
http://developer.apple.com/library/safari/#documentation/AudioVideo/Reference/HTMLMediaEle mentClassReference/HTMLMediaElement/HTMLMediaElement.html
The question is "Are there browser based methods that seek AMS delivered streams more quickly or with better accuracy?"
Everyone is aware that mobile is exploding. On some of our videocentric apps the share for iOS is approaching 20%. PM Kevin Towes, what are you doing to accomodate this need???

How to get users' login logout time for user IDs for a specific date?

Dear All,
There is a case I being requested to retrieve the Userid, User Name,
User Group, User Dept, Date, Login Time, Logout Time in a specific date, for example, 21.05.2009.
How should I retrieve the information? The user want to input specific date and user group then return the details that mentioned above.
I try with SUIM->Users->By Logon Date and Password Change... but I can't specific the date that I want ...
I try with SM19 (Security Audit Log), but unfortunately in my system this is not activated.
I've seek for SAP's advise, and they say need to ask abaper to developr a report in order to get such details....
Do you guys have any other methods?
Do you guys know which tables will contain the details as mentioned above?
Best Regards,
Ken

Unfortunately without the audit log, you're going have a hard time finding this information. As mentioned, ST03N will give you some information. If your systems daily workload aggregation goes back to the date you require then you'll be able to get a list of all users who logged on that day. ST03N doesn't keep time stamps just response times.
My only idea is VERY labor intensive. If your DB admin can retrieve a save of the database from that day then table USR02 will hold a little more information for you. It will contain last login times for that day. If your system backup policy happened to have saved the contents of folder "/usr/sap/<SID>/<instance>/data" then you potentially have access to all the data you require. The stat file will have recorded every transaction that took place during that day. If that file is restored you could use program RSSTAT20 to query against it.
Good luck and turn on the audit log as it makes your life much easier!

Sugg on how to define load time -specific time instance across GEO location

Similar Messages

Maybe you are looking for