Suggest me best way to learn Linux .

Hi,
I have interest to learn Linux but right now i don't have basic knowledge on Linux. Plz suggest me best material/book or any other way to learn Linux. If any one having materials plz send it to my mail id <email address removed by moderator>
Thanks & Regards
Ramesh.
Moderator action:
These are public discussion forums. Requests for off-forum communications defeat that entire premise. Additionally, when you publish your contact information you are requesting to be spammed by bad people... FOREVER.
Edited by: rukbat on Jun 24, 2011 6:21 AM

Your first task will probably be to decide on a Linux distribution and and also determine if you have enough hardware resources. Then install the OS and see further. There are many tutorials and Linux lessons available for free on the Internet.
If you are familiar with windows and need it for your day to day work, save yourself from very frustrating experiences and do not erase your hard drive or bother with dual boot, like it was done 10 years ago. Look into setting up Virtualbox first http://www.virtualbox.org. It will allow you to run any distribution of Linux without jeopardizing your primary operating system. It will give you all the flexibility you will need to install or reinstall and learn Linux whenever you have time.

Similar Messages

What is the best way to learn Mac OS X 10.7 Lion in depth?

What is the best way to learn Mac OS X 10.7 Lion in depth?
I have updated to lion a few months ago, found my way around just by playing with it, but now I would like to get serious and learn pretty much all it can do. But wondering if I should get one of those lion tutorial apps, or just an old fashion book. I guess practical exercises would help. Oh, and with Mountain Lion coming this summer, should I just wait?

Thank you for your suggestions Softwater. Your book suggestion led me to this other one:
Mac OS X Lion: The Missing Manual [Paperback]
David Pogue (Author)
The reviews were pretty good, and I think it's a good starting point, for my current level, but will consider your suggestion later on.
Well, if I don't upgrade to Mountain Lion when it comes out later this year. Otherwise I may have to wait for a Mountain Lion: The Missing Manual

What is the best way to learn SAP-ABAP

What is the best way to learn ABAP??
Stick to SAP press books and understand and learn theroitically
'or'
Move to ABAP programming and experiment all the things you have learn.
If both want to go hand in hand and if we want to do more practise, where can i find a source of abap programming questions (like codechef for java,c,c++..). Bcoz understanding new concepts require practise and to creating programs to practise is a really difficult.
Thnak you
Md Omar saleem

Hi,
Do the SAP course (BC400 - 5 days - it is a great course) and then practice practice practice.
The language itself is not difficult, but finding your way around the SAP system can be challenging.
Try to do real-life examples.
good luck!
Paul

Can you suggest a best way to store and read arabic from oracle database?

Hi ,
can you suggest a best way to store and read arabic from oracle database?
My oracle database is Oracle Database 10g Release 10.1.0.5.0 - 64bit Production on unix HP-UX ia64.
NLS_NCHAR_CHARACTERSET AL16UTF16
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CHARACTERSET WE8ISO8859P1
I have presently stored the data in nvarchar2 field. But i am not able to display it correctly.

Using the national characterset should work but there are other factors that you have to consider when working with NCHAR/NVARCHAR2/NCLOB.
If possible, changing the characterset is usually the best solution if it's a possiblity for you.
For more info:
Dear Gurus: Can u pls explain the difference between VARCHAR2 & NVARCHAR2??

Best way to learn Photoshop?

Hi there,
I'm trying to transition to a career as a graphic/web artist and before making the transition I was looking to take a photoshop and/or illustrator classes (preferably weekend classes) in the Los Angeles/Santa Monica area. I don't have photoshop on my computer so ideally I'd be able to find a class that had the program loaded on their computers already.
Any help and/or advice on how to become a graphic/web designer would be greatly appreciated. Thank you very much for taking the time.

A student can buy the whole creative suite for $599 the cost of nonstudent purchase of Photoshop standard. The best way to learn Photoshop is to have it and use it. Click on every button, menu item, and pallet/panel. don't be afraid to look in every nook and cranny, I'm always surprised by the lazy people who ask the most basic questions all because they have not put the time into looking around the application.
seriously if you are going to spend all that money on the app It seems like you would want to spend some time going over it. Think of it as a video game and you must look at everything to win.
also if you only want it to crop pics and print them or put them up on a simple website Elements just might be a better choice

What is the best way to learn about galaxie s3 from novice viewpoint?

what is the best way to learn about galaxie s3 as a complete beginner? nothing that is taken as a given by other discussions is known by me. i instantly get lost.

Do you already have the phone, or are you planning on getting the phone.
You could sign up for a free workshop at one of your local Verizon stores. You could read the owners manual. You could peruse thru the topics on THIS Verizon site.
I thought there was a thread which gave a bunch of tips/tricks for the GSIII, but I can't seem to find it. There IS one for the Galaxy Note II which MAY be helpful with the GSIII, though.

What is the best way to learn to use the gaming development software in creative cloud?

What is the best way to learn to use the gaming development software in creative cloud?

Ask in the forum(s) for the program(s) you are using
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

What is the best way to learn SAP Java

Hi,
I would like to understand basic principles of SAP Java, to check how it is working, primarily J2EE components like JMS, WS, EJB, Persistence... As I'm ABAP and PI consultant, I see this as my next step, sure I'm not aiming to be experienced Java developer beacuse this would require much more time than I have now.
So far I read "Foundations of Java for ABAP Programmers" but I think that this is just a begining. I want to learn more stuff about SAP J2EE and J2SE is for me, let say, clear.
Also I start reading "Java Programming With The Sap Web Application Server" as my next book about SAP Java, but it is not quite that I don't like this book, it is somehow not interested for me.
So I would like to hear your suggestions what is the best way or the best approach to learn SAP Java. I see this as future help for one ABAP and PI consultant. Also I've done some Mapping developments for PI (SAX and DOM parser), so really think for me to know Java better it will be "bigger plus" for me.
kr
mario

I will suggest you SAP Elearning section on SDN about Java Development.
Below is the link....
http://www.sdn.sap.com/irj/scn/java-elearning?dprpp=all
It contains lot of practical examples which will keep you interested as well..
But you wil lhave to be very selective there on whaich topic you wish to kick start.........
For example there is one called :
Java for ABAP Programmers
ABAP Objects for Java Developers
SAP Java World for ABAP Programmers
Java Mapping in Exchange Infrastructure

Is Using Netbeans the best way to learn Java?

hi all. this is my first post.
okay, I am total n00b. But I have been flirting with the idea of learning to code for about 2 years, and I think I need to leanr java, though I hear it is a difficult first language. but i love the platform independence thing. so a question.
is it a good practice to learn the language with netbeans, or just with a text editor? i am leaning to netbeans but thought i'd ask others.

Encephalopathic wrote:
Understand though that if you ask this question to 20 different folk here, you'll get 20 different answers. Also realize that this has been asked 3,428 times here.all sane people will tell you that using Notbeans may not be the worst way (that would be BlueJ) but is far from being the best way (which would be VI).

Suggestions on best way to switch b/t Analog and Digit

I Just finally got myself the Logitech 5450's Speaker which support analog and digital 5. but Im a bit of a novice when it comes to audio stuff and Im just realizing that as great as digital sound is for movies (which support it of course), that unless a games specifically supports Dolby or dts digital output (which most do not), Ive got to switch back to using an analog connection.
The two annoyances Im left with whenever I need to switch from analog to digital (or vice versa) is swap cable on the sound card (between a coax digital and the "Sub/Center channel" plug of the analog 3-set plug) and Ive got to change the output setting on my sound card to enable/disable the "Digital Output Only" setting.
Im wondering if anyone has any suggestions on the easiest way to manage these settings so that i can swap between these two modes as easily as possible.
Thanks in advance!!

The best way is to use Migration Assistant. When you start up your new machine you will be asked whether you want to migrate data from another machine. This involves connecting them by Firewire cable and starting the source machine in FireWire Target Disk Mode. (New updates may allow doing this via USB, but I don't know how this works).
You should do this before setting up any user accounts on the new Mac, and should choose to import the user(s) from the old one. You can choose whether to bring applications over: if it's the same version of Leopard this would probably be OK, but many people feel it's better to reinstall. In any event it won't over-write the included Apple applications such as Safari.
When you have done this you will find your Home Folder there intact, and registered programs will still be registered (unless the registration depends on the particular computer); all your data will be there, including bookmarks and contacts etc.

Needs suggestion the best way database insertion using OSB

Hi all, again and again I need your suggestion. Which is the best way for writing data to database using OSB in few tables as fastest as possible (speed consideration)?, should I make lots DB schema for supporting JCA adapter and transform each message and writing to database? OR should I call java callout then using EJB for writing to database?.

Hi,
We had the similar scenario in our project and this is my take on this.
Its better to use a JCA DBAdapter to execute/invoke a stored procedure and then have the PL/SQL script for insertion into the Stored Procedure.
As the OSB DBAdapter configuration is very tightly coupled to the DB structure any changes to the column types of the table will mean a regeneration of the adapter WSDL.
In general even for other DB operations like select, delete, update... its is a good idea to use the stored procedure in conjunction with the DBAdapter to decouple the link to DB to some extent.
Thanks,
Patrick

What is the best way to learn about java?

What is the best and cheapest way to learn java?

I also am a Newbie to the Java language and am trying to get my head around it. I guess it all depends upon how much experience, and at what level, you have with programming in general. I have a good understanding of what my University tutor called "sequential logical thought" but I must confess this Object Oriented approach is, at first, most odd. However the Sun tutorial :
http://java.sun.com/docs/books/tutorial/java/TOC.html
: is the one I use the most. If I don't understand a specific computing term then I look it up at :
http://www.webopedia.com/
: which is a very good online encyclopedia of computing terms.
There is also :
http://www.joegrip.com/
: which is an online "interactive" tutorial (you have to pay)
I would advise against rushing out and buying a book until you have spent a whole day trolling through the 'net and seeing what it has to offer . There is a lot out there. The problem is wading through all the nonsense until you find what you're looking for.
Good luck

Suggestions on best way to shoot this....

I will be editing a short commercial where there will be an actor speaking in the foreground and and some sort of action happening in the bacground ( let say a football game ). Now, the producer wants to edit this so the background freezes at different spot while the the actor continue to speak.
So basically background goes in and out of freeze mode while what ever is going on in the foreground continues. What's the best way to shoot and edit this ??? Thanks

I would also add that green screen can be tricky in
the non-linear world.
Hmm? Post production and visual effeccts has been
non-linear for almost two decades at this point? I
can't remember the last time I heard of a visual
effect that was achieved in a tape suite? Have you
heard of Inferno, Shake, Houdini and the like?
Your suggestions to shoot tape only apply if this is
a video/low budget project. The great majority of
decent visual effects work is still shot on film, to
this very day, as are most commercials. And posted
non-linearly.
Hmm? Post production and visual effeccts has been
non-linear for almost two decades at this point? I
can't remember the last time I heard of a visual
effect that was achieved in a tape suite? Have you
heard of Inferno, Shake, Houdini and the like?
Maxx,
Sorry for the confusion. My experience with green screen has been done with a studio, ultimatte installed on the studio cam and someone standing in front of the green wall. The switcher did the rest.
If you shoot the subject in front of a green wall and then attempt to do the matte work in post, it's possible to get keying problems due to poor lighting or incorrect wardrobe on the talent.
Perhaps, most commercials are shot on film in your world, but there's a whole bunch of folks in small markets and cable companies making commercials for local companies. These folks in my experience work with little budget, no time and clients who don't want to pay for production. Their jobs are difficult and they aren't producing art or winning awards. They're just trying to do the best job they can.
The great majority of
decent visual effects work is still shot on film, to
this very day, as are most commercials. And posted
non-linearly.
I would disagree. Most of us aren't lucky enough to be in your great majority producing decent visual effects. I've seen some pretty great work done low budget and the folks who do it deserve a little help and lots of respect.
Dual 2 GHz Power Mac G5 Mac OS X (10.4.8)

What is the best way to learn FCP?

Hi,
I have used FCP in a very limited way, i.e. playing around, making short videos. I am wanting to move onto editing all of my videos in FCP but I find it very different to anything else I have used, even on a mac. What is the best/easiest way to learn the essentials of FCP? Also bear in mind I'm a student, so looking for a budget solution.
Thanks
Kelly
PowerMac G5 DC 2.0Ghz, Mac Mini G4 1.42ghz, iBook G3 800Mhz Mac OS X (10.4.4) iPod Nano

Books and tutorials are great and I'll second them... in fact, I'll put my vote out for Jerry Hofmann's book... not sure if he's got the v5 out or if he gave up, but even the v4 book would be very helpful.
Takes you step by every livin' step through the editing process of a short film. Letting YOU make the choices etc. But it is done so in a really thought out lesson way.
By the time you're done, you've got a nice film worth showing at your local living room.
HOWEVER -- I have ALSO found that 50 tutorials doth not an editor make. Take it from me... I love After Effects, but I've done so many tutorials I rely on them to show me how... if you get my meaning. I've never really dug INTO the program to build my own things (not really, but it sounds good and makes a point.)
I guess I'm saying... take your camera and a day and build a story. Simple as filming your back yard. Got kids? Use them.
You'll find as you shoot/cut that you'll be looking for those shots and effects that you'll need to key in on as an editor. You'll get a sense of pacing as you are working out what the heck does JKL do?
Yes, you might be mouse driven for a while, but after you know what the books are talking about you can then start to understand and internalize them.
Ya?
Good luck,
CaptM

What is the best way to learn to build an app

What is the best way to go about learning to build an app for the iphone and ipad??

Have you taken the step yet to obtain a paid developer account?

Suggest me best way to learn Linux .

Similar Messages

Maybe you are looking for