Suggest me plz

hi,
please someone suggest me i am so confused about
belle fp2 .whether to do update or not. it is good for me or not.i dont want that after updation i feel belle fp1 was good.
Please i need suggetion.
Thanks
nokia 701
belle fp1

Search the Forum and you will see a no. of threads on this subject..mentioning Pros and Cons . Its finnaly upto you to decide whether to do it or not because if you depend on other users you will be more confused because you may find almost same nos. in favour and same against..

Similar Messages

Want to become SJCP, suggestions/directions plz

Hello,
this is srinivas gourishetty from india,
iam doing my final year B.tech in IT,
i want to get SJCP certification,
but i dont know any information about it.
can anyone suggest me,
how can i start reading for it, i mean, list of books i should read for it.
what is its fee structure and its rules and regulations.,,
i deeply request SJCP (who already got it) to show me a good path to get it.
i hope u will help me.
thank you.

kindly can u tell me wher can i start from that
site,
that site has all images and .......
can u give me exact link from where i can start
(i know iam asking toomuch, but plz help this buddy)
http://www.javaranch.com/certfaq.jspJust where it says "Programmer Certification Study FAQ".

Suggest Tables plz

I need to find tables for the following data
Outbound Data (pickup all where the Goods issues are done) -
1.Comp.Code
2.Date (goods issue data)
3.Prod.Hier (F or P)
4.Material#
5.Division
6.Sales Orgn
7.Sales Order#
8.Transfer Order No
9.Shipment#
10.Delivery #
11.Invoice#
12.Route
13. Vol.Iss
14.UOM
15.WT Iss
16.UOM
17.Iss.Qty
18.UOM
20.Iss.Master Cartons (look out for alternative UOM; with MC to base uom), leave it blank if the MC is missing in Alt UOM
21UOM (always MC)
22.Plant
23.SoldTo#
24.ShipTo#
26.Shipto - Country
27.Shipto - State
29.Shipto - Zip
30.Shipto - CCar
31.Shipto - Carrier
32.Shipto - Inco Terms
33.Shipping Condition
34.Route
Please suggest .
Thanks

Hi
check these tables
LIKP: Delivery Table (Header Data)(VBELN,LFART,KUNNR,WADAT,INCO1)
LIPS: Delivery Table (Item Data)(VBELN,POSNR,WERKS,LGORT,MATNR,VGBEL)
      (LIPS-VGBEL = VBAP-VBELN, LIPS-VGPOS = VBAP-POSNR)
VTTK: Shipment Table (Header Data)(TKNUM)
VTTP: Shipment Table (Item Data)( TKNUM,TPNUM,VBELN)
      (VTTP-VBELN = LIPS-VBELN)
VBRK: Billing Table(Header Data)(VBELN,FKART,BELNR)
VBRP: Billing Table(Item Data)(VBELN,POSNR,FKIMG,NETWR,VGBEL,VGPOS)
      (VBRP-AUBEL = VBAK-VBELN, VBRP-VGBEL = LIKP-VBELN)
VBPA: Partner functions Data(VBELN,PARVW,KUNNR,LIFNR)
Take the Partner Numbers based on the function
KNA1 and ADRC
for getting the Sold To and Shipto Addresses
EKKO-- Purchase Order Data (Header)(EBELN,BSTYP,BSART)
EKPO-- Purchase Order Data (Item)(EBELN,EBELP,MATNR)
MKPF-- GRN Data (Header) (EBELN,BLDAT,BUDAT,XBLNR,BKTXT)
MSEG-- GRN Data (Item)(MBLNR,BWART,LIFNR,MATNR,EBELN)
Reward points for useful Answers
Regards
Anji
Message was edited by:
        Anji Reddy Vangala

I forgot my mac book pro password and i am unable to login. I even dont have a dvd to reboot any other suggestions? plz

I forgot my mac book pro password and i am unable to login. I even dont have a dvd to reboot any other suggestions? plz

http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/
http://osxdaily.com/2011/04/25/change-admin-password-mac/

My home buttons not working!! Plz help!!!

I was just playing around on my ipod touch(4th generation, 32 gb, black... Not that that really matters) and the home button just started getting harder and harder to use until now it doesn't work at all. I've tried rubbing alchohal and cleaning it with a toothpick already. Any other suggestions? Plz help me I'm getting really mad at it. Also, if nothing else works, will I be able to get a refund/exchange? I only bought it 3 months ago.

Try:
fix for Home button
Fix a broken, unresponsive or sticky iPhone Home Button
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

How can write our z program in standard print prog RVADOR01 plz urgent

hi Guru
What is requirment i developed on zsmart form. for this i have one Zprint program.
I want assing this zprint proram in entry form . But it gives dump like conflict type.. what may be problem . I copied stand. RVADOR01 in this I write one perform. In this perform i write smart form code. Is it wrie way or not give me suggestions.Plz very urgent. I only pass vbeln in this .plz give me suggestions.
Plz urgent
Durgesh

Hi ,
    I assume that you have :
    smartform
    driver program of type subroutone pool
    their is one main subroutine in driver program entry_xyz or whatever which calls
    other subroutines .
    Now go to nace assign smartform name , to print program name and     subroutine name ex . entry_xyz .
It it does not works ask your function consultunt to configure driver program , smartform and entry routine in nace .
regards
Regards

Want to pass STRS2 field into sales order and contract.

Hi Friends.
I am creating Sales order using function module IDOC_INPUT_ORDERS and Contract using SD_SALESDOCUMENT_CREATE.
Now I want to pass STRS2(House number field into Sales Order/Contract). In IDOC I tried to pass E1EDKA1-STRS2, but its not coming into Sales order output.But SD_SALESDOCUMENT_CREATE dont have an option to pass the field value.
So in that case how can I achieve the desired functionality, Is there any user exit or let me know the suitable method to achieve the functionality.
Thanks
Gowrishankar

Yes I tried that also.I passed the value from program to user exit MV45AFZZ and updated the structure XVBADR in USEREXIT_SAVE_DOCUMENT_PREPARE, but its not getting reflected in Sales Order/Contract.
Anyone have suggestion..plz let me know.
Thanks
Gowrishankar

How to start with FPGA and LABVIEW when you do not know any computer language? Only have exposure to Windows OS.

Myself is an Electronics Engineer. But I don't have any exposure to any comp language like C or whatever. I do not have any exposure to Labview as well. I've been involved in design and developing Digital Circuits like interlock units, Position monitoring and display systems etc. Now I want to work upon FPGA based circuits. Can anyone suggest me plz that how to start with?

Hi BNarendra;
Here are some resources that can be useful, the first is an introduction to LabVIEW and the other ones are for LabVIEW FPGA.
LabVIEW
http://zone.ni.com/devzone/cda/tut/p/id/5247
LabVIEW FPGA
http://www.ni.com/swf/presentation/us/labview/lvfpga/default.htm
http://digital.ni.com/public.nsf/allkb/0697A6F4BFC6E152862570FA0072153A?OpenDocument
http://zone.ni.com/devzone/cda/tut/p/id/3261
I hope the information is useful.
Good Luck!
Francisco Arellano
National Instruments Mexico
Field Systems Engineer - Energy Segment
www.ni.com/soporte

Horizontal scroll bar in maintenance view

Hi all,
i have a ztable which has ony two fields id and description. Maintenance view exists for same.
Can anybody suggest me how to set 'HORIZONTAL SCROLL BAR' for this view as sometimes description is too large and not able to see the description. plz suggest me.
plz help.
thnks n Regards,
Ashmita Singh

You can do one of two things:
1. When you are at the maintenance view, manually drag the right edge of the columns to make them narrower.
2. If you can change the maintenance view, go to the function group with the same name as the maintenance view (which should be the one automatically generated, such as from SE54), and then find the screen in the function group. Open the screen, click "Layout", and the SAP GUI painter will display the screen layout. Over there, click the upper-left corner of the table, and the control TCTRL_<your_view_name> will be selected. Open the "attribute window" or press F2, and then you can set the number of Fixed Columns. Try reducing the number and re-test the effect.

Connection pooling in JSF

Hi Guys,
Is it possible to do connection pooling using JSF XML configuration files(Like using<data-sources> tag in struts though it was depricated in struts 1.3.5) or is there any alternative way to do connection pooling in JSF. could any one suggest me plz.
Regards,
A.

Connection pooling is an orthogonal concern to JSF. While it doesn't provide any facilities for connection pooling, there is no reason any existing connection pooling solutions could not be used in concert with it.
Finally, I would point out that you if you are using JSF in a JEE environment, it is likely that your application server provides connection pooling.

Syncing iTunes with iPhone5 NOT WORKING.

I cannot get my iphone5 to sync with itunes music and i've tried ALL the suggested ideas. plz help.

yes, i have...i've had iphones for years..and yes i answered your question: nothing happens....it zips through the 5 or 6 step process but nothing transfers to my phone.
I have:
select NO THANKS in itunes match furhter i have ensured it is OFF in my phone settings
I have reset my phone (completely)
I have uninstalled and reinstalled itunes on my pc

USING ROWNUM

Hi,
I have 4 tables ( 1 parent - 3 child). Reference is the primary key/FK in these tables. Two of the child tables have 1..1 mapping with the parent table and I have created a view called data_view that would have all the essential columns from the parent + 2 child tables.
One of the child table (WORKFLOW) holds a 1.. m relationship with the parent table.
Now I want to move data from the 4 tables to two history
tables . One history table has the structure just similar to the data_view and the other history table has the same set of columns as the workflow table.
I tried to code a logic where by I insert the first 1000 rows into the history tables and then delete the same from the base tables. I placed this in a loop and gave the exit criteria as SQL%NOTFOUND
After inserting the first 1000 rows into the history tables and deleting the same from the base tables, the loops exits during the second iteration with the error, primary key constraint in the history table violated.
Am I missing something. Your comments on this would be appreciated
FUNCTION MOV(p_date DATE)
RETURN NUMBER
AS
BEGIN
LOOP
INSERT INTO HIST (
column_names(SELECT
column_names
FROM
dATA_VIEW
WHERE
TE_DATE <= P_DATE
AND REFERENCE NOT IN (SELECT REFERENCE FROM WORKFLOW WHERE PROCESSING_TYPE IN ('K','E'))
AND ROWNUM < 1000 );
EXIT WHEN SQL%NOTFOUND;
INSERT INTO WORKFLOW_HIST
(column_names)
(SELECT
column_names
FROM WORKFLOW
WHERE REFERENCE IN (SELECT reference FROM DATA_VIEW WHERE TE_DATE <= P_DATE
AND REFERENCE NOT IN (SELECT REFERENCE FROM WORKFLOW WHERE PROCESSING_TYPE IN ('K','E'))
AND ROWNUM < 1000));
DELETE FROM BASE CASCADE
WHERE REFERENCE IN ( SELECT reference FROM DATA_VIEW
WHERE TE_DATE <= P_DATE
AND REFERENCE NOT IN (SELECT REFERENCE FROM WORKFLOW WHERE PROCESSING_TYPE IN ('K','E'))
AND ROWNUM < 1000);
COMMIT;
END LOOP;
RETURN 0;
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE(SQLERRM);
ROLLBACK;
RETURN SQLCODE;
END MOV;
thanks

Hi,
The problem is just beacuse of ROWNUM..
SELECT REFERENCE FROM WORKFLOW WHERE PROCESSING_TYPE IN ('K','E'))
AND ROWNUM < 1000 );
Instead try this statement...
SELECT REFERENCE FROM (Select Reference from WORKFLOW WHERE PROCESSING_TYPE IN ('K','E')
Order By Reference)
Where ROWNUM <= 1000;
Sol is if you use "order by" inside a subquery and then use ROWNUM, it should solve your problem.
My suggestion is plz dont rely on ROWNUM on these kind of operations. You can get unexpected results.
You can also use ROWNUMBER() instead of ROWNUM.
Thanks...

File to file scenario. Pls help

Hi All,
I have to make file to file scenario.
XI will pick file from File Sender System and put file at
File Receiver System. From there file will go to printer.
File name has to be constant at receiveing system like "ABC.txt"
There is one condition:
Now suppose there is file at Receiver system and Printer gets jammed so file will not be picked from Receiver system.
At that time XI should not send 2nd file and should wait till the
receiving file directory is empty again.
How to implement the above condition.
Pls suggest.

Rich,
Seriously I couldn't understand why u are opening multiple threads. It's not like you open new thread the solutions gonna be different, always the solution will be same. It will be easy for u to track as well as easy for us to suggest. Plz co-operate with this, we know that u are in urgent situation, but opening multiple threads doesn't solve ur issue for sure, it makes the participants to be frustrated and left your question unanswered, plz understand this.
I hope u can undestand!
I know ur scenario is only File 2 File, I don't what could be the frequency of the Sender File or how often the File will be triggered. I will try to explain the best possible way I can.
I'm going to explain with example , IS_RETRY_LIMIT - 2
See,
First trigger , File picked by XI and sent to Receiving folder , Printer picked the file - XI Job is done.
Second trigger, File picked by XI and sent to Receing folder, Printer is jammed - XI Job is done.
Third trigger, File picked by XI , it couldn't able to deliver to the Receiving folder ,coz file ABC.txt is already there. So please understand the concept of IS_RETRY_LIMIT, XI retries once again after some interval, it couldn't able to deliver,file is there. - XI Job is not done- in process
Fourth trigger, File picked by XI , it couldn't able to deliver to the Receiving folder ,coz file ABC.txt is already there,(Printer is not resolved yet, Second trigger file is already there). XI will retry to send file again after some interval it couldn't able to deliver,file is there. - XI Job is not done- in process
XI retries the file for Third trigger process, it couldn't able to deliver, XI set the message to FAILED status.
Fifth Trigger, File picked by XI , it couldn't able to deliver to the Receiving folder ,coz file ABC.txt is already there,(Printer is not resolved yet, Second trigger file is already there) XI will retry to send file again after some interval it couldn't able to deliver,file is there. - XI Job is not done- in process
Printer Problem Solved
File Picked by the printer, Second Trigger is done.
XI retries the file for Fourth trigger process, it successfully delivers the message to the printer - XI Job is done
XI retries the file for Fifth trigger process, it successfully delivers the message to the printer - XI Job is done
Sixth Trigger, File picked by XI and sent to Receiving folder , Printer picked the file - XI Job is done.
So, now the job continues as usual..
Now your question might be what to do for the FAILED message in the Third trigger, As I mentioned in the other thread, you need to re-deliver it by the link given in the other thread.
I hope u can understand , how IS_RETRY_LIMIT helps in your scenario!
raj.

HELP!! Nokia's API classes not found with j2me WTK

I setup j2me WTK, jdk1.4.2 and also Nokia's SDK (Series_60_MIDP_SDK_for_Symbian_OS_v_1_2_1) on my Win NT 4.0 machine.
J2ME samples (shipped with it) are working fine with ktoolbar. but when i try to build & run nokia samples, they are always giving error "FullCanvas class not found" and "package com.nokia.lcd.ui.* not found". I am sure it is the problem of placement of classes of nokia at correct place inside j2me's WTK. However, i followed the guidelines to install symbian sdk inside wtk401\wtklib\devices folder (as per instructions of forum nokia). But i am still not able to get it running. Any expert suggestions, then plz respond me , i am in urgent need to solve this issue!!!! plz help me!!!!

Hi,
Maybe I'm being thick but I can't get this work. I've tried zipping the com/nokia stuff into the midpapi.zip. And I've tried just replacing midapi.zip with classes.zip from the nokia emulator. But it still says:
"package nokia.mid.ui does not exist
import nokia.mid.ui.*;"
I'm using ktoolbar 1.04.
Many thanks!
CP
Hey, thanks for the great tip. Was also using
KToolbar because it runs faster on my slow laptop than
Sun One studio.
With the later version of WTK, the paths
C:\...\WTK21\lib contains 2 files, midpapi20.zip and
midpapi10.zip
The later contains classes for compiling to MIDP1.0
standard. I think most people use this. Replace it
the class.zip in
C:\Nokia\Devices\Nokia_7210_MIDP_SDK_v1_0\lib if
you're using the same SDK as I am, and don't forget to
rename it.
Cheers.

Between two ViewContainerUIElements want to add RadioButton & Its Events ch

Hi friends,
I have requirement using the WebDynpro JAVA that between the DropdownList and TableView I want to add Radio Button. And want to change the even accordingly.
There is a ViewContainerUIElement_A which contained the Single DropDownList and another ViewContainerUIElement_B which contained the TableView. So based on the selection of dropdown list (ViewContainerUIElement_A) displayed records in the TableView(ViewContainerUIElement_B). Dropdown and tableView are both use the Adaptive RFC Model. Which is working fine.
Now i try to modify like this :
I have created the RadioButton as per requirement, after selection of DropDownList , I am getting the radioButton values and able to select and see the change values while clicking the Radio button which is perfectly working fine but tableView is not refreshing at all.now my question is how to call the TableView(ViewContainerUIElement_B) using the Radiobutton?
So do I need to create the ViewContainerUIElement_C for RadioButton also, currently I am using the simple Radiobuton and Group for this.
Do I need to create ViewContainerUIElement_C for RadioButton also? How to link with inbound plugs with this and how to call the even.
Suggest me plz.
Thanks
Ali

Hi Suresh,
Since TableView is ViewContainerUIElement and creating dynamically so not able to see much codes here. Any Idea how to refresh the TableView using onSelect.
I already assigned one method under the OnSelect of RadioButton using that i can see the selected values as message.
Is there any way to call the Dropdown list event in the Radio Button?
Thanks
Ali

Suggest me plz

Similar Messages

Maybe you are looking for