Suggested Improvements for DW6

1) Tags highlight when clicked on in the coding screen and display the end tag that goes with it. Example of this would be in NOTEPAD++.
     The feature is very helpful to code writers when writing their page to see if things are matching up correctly. While we have the DESIGN area to
     see things it is difficult to determine if your overall structure integrity is still there other than through displaying blocks.
     Display blocks in CSS is nice, but we don't always want this coding.
2) Would be nice if when you double click the tag in the coding screen if the CSS segment. Perhaps wishful thinking here.
3) When using the "Fluid Grid Layout Guides" are fantastic, but they need to be stronger in structure as they are very touchy and quickly become disabled as you work.
     Perhaps a screen should come up that states "Use of the fluid grid layout guides installs several CSS rules for the various screens please excercise careful selection as you      work with your CSS selectors and the rules, or properties." I was working with mine for a few days before I realized what was going on and why everything was not      functioning for me as I was adjusting the wrong set of CSS stylesheet rules.
4) While we know this is a feature that started in Illustrator, it would be nice to have it here too. A layers panel where you can work on say the "login" section and turn off,      hides, or dims the rest of the layers with the exception of the main blocks of the structure of the document, this layer feature would hide the other CSS rules that have      nothing to do with the Login section. Something along those lines . . . it allows one to focus on just that feature, very nice for those who get distracted from their work      from others calling them, etc. HELPS A PERSON FOCUS.
These features would be nice if they could not only get them to work in HTML, but the scripting languages too. You fellas are the geniuses you will figure it out somehow. Let me know if I have suggested something that is already there and I have not discovered it yet in regards to DW C6 and its fantastic fuctions.
Thanks

For maximum "get your suggestions to the people who count" try submitting this form...
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Similar Messages

Suggest improvements for nokia n73 and other devic...

Nokia n73 is the most succsesful device ever made by nokia. But you noticed that the images taken by the n73 are little blury and the video is also poor. If theres is nothing harware problem why not nokia fix theme with software update. Why not nokia try to make n73 just like n78. This will be great if nokia update n73 software and fix the problem. N78 also powerfull device but its buttons make it lazy. N78 will be more greater if its button replaced with bigger and esiar. And the improved new device will launched n78i.
Personal info removed
Message Edited by shameers on 23-Feb-2009 10:21 AM

I would not bother getting a nokia at the moment.....
If you can live without nokia drive for now then i would hold back for atleast 6 months and see what happens.
Nokia have slipped down the chain a bit and are not as almighty as they use to be.
There are loads of probs with the Lumia 800 and the 710 is not all that good compared to nokia's of old.
I got the 710 because of nokia drive and it is no where near as good as the old Ovi navigation...
In fact the whole phone is a let down....with poor camara, poor sat nav, poor speaker and poor battery...
The Actual phone is a nice design and the screen is not bad...WP7.5 looks interesting but still needs a lot of work to catch up with the others.
Not sure what the Omnia is like...but if i knew then what i know now about the 710 i would of gone for the HTC Radar and just used my N8 for Sat Nav.

More suggested improvements for iWeb

I think iWeb is absolutely brill. I’ve had it about three weeks now, and for a first software version the outlook is very promising. Looking at people's sites it certainly is flexible enough for both text heavy sites and media sites, and some of the designs are amazing. I love the drag and drop simplicity and the speed with which you can build a site from nothing at all. Gone are the days of ******* about with tables and percentages and stuff like that. My HTML (and my memory of it) was ancient by the time I could build up enough energy to tackle generating even a simple page. Now I'm tinkering about on a daily basis.
However, there are some things I'd like to see in version 1.1 or 1.2 (I don't want to wait until iWeb 2.0 in iLife 07!). I know a lot of these have already been mentioned in wish lists in this forum (some of which seem quite advanced in nature, dependent on .mac changes or server side technology) but hopefully I’ve some new suggestions coming from the perspective of a beginner or simple personal homepage designer. Here’s my list roughly in order of importance:
1. Publishing of only changed pages – the single most important in my view
2. Ability to cut and paste HTML into ‘HTML’ shapes through the inspector, thus solving the blog comments, banners, hit counters, metatags issues all in one shot
3. Ability to preview a page in browser of your choice immediately there and then to check how it looks without publishing
4. Ability to configure titles of pages correctly, instead of basic titles like ‘Home’ ‘About Us’ – allow titles to be different from page name
5. Better use of optimised images and code to reduce loading times
6. Ability to lock, unlock, group and ungroup page elements a la Appleworks
7. Proper support for adding hyperlinks to animated gifs instead of having to use a workaround
8. Ability to select whether links open in a new blank browser page and to go to specific anchors on a page
9. Ability to add pop-up comments via the inspector to items that you haven’t got round to building yet
10. Ability to control size of photo thumbnails, and have more than 3 wide, instead of having one really really long page
11. Proper site manager with truly independent sites and independent publishing
12. Again, the site manager should allow you to nest pages to aid organisation of your pages instead of having them all in one long list (doesn’t necessarily have to link them either)
13. Ability to change template midway through design
14. Ability to alter hyperlink colours, surrounds and add rollovers including template ones and ability to save these changes to custom templates
15. Addition of other Apple items as buttons, eg ‘Visit Apple Store’ ‘Get Quicktime’ ‘iTunes Music Store’ with the correct links, to further spread the Apple Love
16. Built in favicon editor in the inspector, a simple one will do
17. Allow FTP to non .mac site though not essential
That’s my list. And, yes, I have sent iWeb feedback. Does anyone have any other suggestions?
Michael
http://www.rowan-cottage.co.uk

I would very much like to see the ability to add FORMS to web pages, and the ability to have the information from the forms either be sent to the site owner, or shown on a continually updated webpage (which would be great for surveys). For that matter, the ability to add types of graphs/charts by simply entering info into the Inspector and assigning it a value would be quite helpful too.
Pull-down menus in navigation bars would be lovely. ANYTHING to help with more complicated site navigation, please. Fixed nav bars (that don't move when scrolling) would help with overly-long pages.
I would also like to see an additional type of PHOTO page -- maybe call it an ALBUMS page -- that works like the main BLOG page, updating automatically. So basically whenever a traditional PHOTO page is made, an image (the first photo from that page) appears on the ALBUMS page -- which becomes a clickable hyperlink to that page. Yes, I know there's a way to build something like this from a blank page by dragging photo albums from iPhoto -- but it would be so much simpler (and faster -- especially with PHOTO page-heavy sites) to have a main ALBUMS page that does all the work for you.
I know there's a million other things I'd love to see, but these were the ones (not already mentioned above) that popped in my head first.
PowerMac G5 Mac OS X (10.4.6)
PowerMac G5 Mac OS X (10.4.6)

How do you send comments to Adobe re suggested improvements for Beta projects?

I think it's a great idea making beta projects available for testing - it just seems strange the HELP menu does not have a direct link back to developers that one can easily send comments/suggestions. I hope I'm in the right place now?
My comment with the new version is:
- you still can't see the ACTUAL SIZE of the file, only the original size of the photo. If you have converted the RAW file...to bad.
- you still can't find what the colour space of the photo is - can you?
These would seem to be pretty basic functions such a "high end" programme should be able to deliver.
Do like the new additions though but shame such an easy to use function such as PRINTING does not have ability to see the consequences of different 'rendering intents' on screen.

Use the beta forum at http://forums.adobe.com/community/labs/lightroom3
McL

Suggested improvements for iPod Nano G5

I love using my iPod at work quite a bit. I keep it in my pocket for convenience. But with it there, I cannot see the display. Today I checked the battery and it was almost dead. I thought it would be a good idea if the Nano could produce a series of three short beeps through the headphones when the battery gets low, say last 20% of charge. Then when it gets to the "last pixel" of the red low-battery indicator, as mine was today, the beeps could repeat once per minute or so.
Also it would be helpful while driving with the Nano in a car adapter/ player if the "Now Playing" song/ artist/ album font could be made larger for easier viewing. It is very hard to read while the car is moving. I see the menu font can be made larger but not the main "Playing" screen. Did I miss something in the manual?
Can the Album artwork be turned off? A lot of times it is the wrong artwork or just a musical note anyway. This would allow for the Now Playing font to be bigger

Thanks! I did not know there was a place at the Apple site to give feedback. I searched the entire site for it before deciding to post my comments here at the discussions forum. I will put my comments there.

Suggested improvements for the Room Console application

The Room Console is a pretty nice tool to have out of the box to aid in visual debugging of LCCS room-state. However, I think it would be far more usable if the list of "My Rooms" were sortable and searchable. Once that list gets full it can be a huge pain to find a single room.

Hi Brian,
Here is another thread about this:
http://forums.adobe.com/message/3489408#3489408
-Jamie

My computer - how can I improve for editing

I am a hobby-editor . . . :-)
Still I am curious to get some hints on which parts of my computer could be improved for video editing.
So hopefully someone here could have a look on my hardware!
Here are the specs: (in german!)
Mainboard:
Asus P6X58D-E
ATX, Sockel 1366, Intel X58 / ICH10R Chipsatz, DDR3-1600
Hersteller      Asus
Modellbezeichnung      P6X58D-E
CPU Sockel      1366
unterstützte Prozessoren      Intel Core i7, Core i7 EE, Xeon (Nehalem)
Mainboard Chipsatz      Intel X58 / ICH10R
BIOS Hersteller      AMI
Formfaktor      ATX
QuickPath Interconnect QPI (MT/s)      6400
ATX 12V Anschluss (8polig)      1
ATX 2.0 Anschluss (24polig)      1
Arbeitsspeichertyp      DDR3
Arbeitsspeicher maximal (MB)      24576
Speichertakt (MHz)      1600/1333/1066 (2000* *OC)
Speichersteckplätze      6
Triple Channel Unterstützung      vorhanden
PCI (32-Bit) Steckplätze      2
PCIe x1 Steckplätze      1
PCIe x16 2.0 Steckplätze      3
SLI / Crossfire Unterstützung      2/3 Way SLI/Quad CrossFireX
SATA Controller      Intel ICH10R + Marvell® 9128
SATA Anschlüsse      6x SATAII + 2x SATAIII
SATA Protokolle      SATAI-III
Unterstützte RAID Level      0,1,5,10
USB Protokolle      USB 3.0/2.0/1.1
USB Anschlüsse extern      4x USB 2.0 intern + 4x USB 2.0 extern + 2x USB 3.0 extern
Soundchip      Realtek® ALC889
Audiokanäle      8
SPDIF Ausgang      1x optisch, 1x koaxial
LAN Chipsatz      Marvell 88E8056®
LAN-Ports      1
LAN-Transferrate (MBit)      10/100/1000
Anschlüsse für Lüfter      5
PS/2 Schnittstelle (Tastatur)      1
PS/2 Schnittstelle (Maus)      1
IEEE1394a Firewire Schnittstelle      1
CPU:
Intel Core i7 950 (3,06GHz)
Sockel 1366, Box - inkl. Kühler
Hersteller/Modellbezeichnung
Hersteller      Intel
Prozessor Modell      Core i7
Sockeltyp
Prozessor Typ - Taktfrequenz      950 (3,06GHz)
CPU Modellnummer      BX80601950
Sockel      1366
Packungstyp      Box - inkl. Kühler
Prozessorkern      Bloomfield
Anzahl Kerne      4
QuickPath Interconnect QPI (MT/s)      4800
Cache
Energieverbrauch
L1 Cache (kB)      4 x 64
L2 Cache (kB)      1024
L3 Cache (kB)      8192
Energieverbrauch (Watt)      130
Herstellungsprozess (nm)      45
Kühler      Original Intel Box Kühler
RAM:
6144MB DDR3 Kingston KVR1333D3N9K3/6G
DDR3 - 1333 (PC3 - 10600)
Hersteller/Modellbezeichnung
Hersteller      Kingston
Herstellernummer      KVR1333D3N9K3/6G
Technische Daten
Kapazität (MB)      6144
Kit bestehend aus      3 x 2048MB
Speichertyp      DDR3
Speicherstandard      DDR3 - 1333 (PC3 - 10600)
Anschluss      DIMM 240-Pin
Timings
CAS Latency (CL)      9
RAS-to-CAS-Delay (tRCD)      9
RAS-Precharge-Time (tRP)      9
Festplatte:
1000GB Western Digital Caviar Black WD1002FAEX
3,5", Serial-ATA/600 (6Gb/s), 64 MB Cache
Hersteller      Western Digital
Modellbezeichnung      Caviar Black WD1002FAEX
Festplattenkapazität (GB)      1000
Formfaktor (Zoll)      3,5
Schnittstelle      Serial-ATA/600 (6Gb/s)
Umdrehungen / Min.      7.200
Geräuschentwicklung Betrieb (dB)      33
Geräuschentwicklung StandBy (dB)      28
Max. Transferrate (lesen) MB/s      keine Herstellerangaben verfügbar
Max. Transferrate (schreiben) MB/s      keine Herstellerangaben verfügbar
Zugriffszeit (ms)      4,2
Cache (MB)      64
Gewicht (g)      690
Abmessungen (BxHxT) (mm)      101,6 x 25,4 x 147
ARLT Garantie      Kein OEM. 5 Jahre Herstellergarantie. 3 Jahre ARLT Garantie davon 6 Monate Soforttausch bei Defekt
wegen mehr Platz, größerem Cache, halber Zugriffszeit und SATA3-Schnittstelle, Transfer Rate (Buffer To Disk) 126 MB/s (Max) - sehr guter Wert !
Brenner:
LG GH22NS 22/22/48/32 DVD-Brenner, S-ATA
Super Multi DVD-Brenner ? mit S-ATA Schnittstelle
INTERNER 22x/22x Super Multi DVD-Brenner mit SecurDisk Unterstützung. Der perfekte Alleskönner für Ihren PC. Brennt nicht nur die gängigen Formate (DVD+R/+RW,-R/-RW) sondern auch DVD-RAM und ist außerdem durch die Double/Dual Layer Funktionalität für die Zukunft gerüstetHersteller      LG
Modellbezeichnung      GH22NS40
Farbe      schwarz
Bauart      intern
Schnittstelle      Serial-ATA
Formfaktor (Zoll)      5,25
Medienaufnahme      Schublade
Puffer (Kb)      2048
Zugriffszeit CD-ROM (ms)      120
Zugriffszeit DVD-ROM (ms)      140
Zugriffszeit DVD-RAM (ms)      175
Lesen CD-ROM      48
Lesen DVD-ROM      16
Lesen DVD-RAM      5
Schreiben CD-R      48
Schreiben DVD-R      22
Schreiben DVD+R      22
Schreiben CD-RW      32
Schreiben DVD-RW      6
Schreiben DVD+RW      8
Schreiben DVD-R DL      10
Schreiben DVD+R DL      10
Schreiben DVD-RAM      12
Betriebs-LED      vorhanden
Grafikkarte:
Gainward Geforce 9500GT
1024MB, PCIe 2.0, DVI, VGA, HDMI
Hersteller/Modellbezeichnung
Hersteller      Gainward
Anschlussart      PCI-Express 2.0
Stromversorgung
Maximaler Verbrauch bei Volllast (Watt)      75
GPU
GPU Hersteller      NVIDIA
GPU Bezeichnung      Geforce 9500GT
GPU Takt (MHz)      550
Kühlung      passiv
DirectX Version      10
Shader Model Version      4.0
OpenGL Version      2.0
HDCP Unterstützung      Ja
NVIDIA CUDA-fähig      Ja
Grafikspeicher
Speicherkapazität (MB)      1024
Speichertyp      DDR2
Speichertakt (MHz)      800
Speicheranbindung (Bit)      128
RAMDAC (MHz)      400
Dual-Link Unterstützung      ja
unterstützte Auflösungen
Max Auflösung (dpi)      2560x1600x32Bit 60 Hz (Dual Link)
SLI / Crossfire Unterstützung      SLI
Anschlüsse
DVI Schnittstelle      1
VGA D-Sub Schnittstelle      1
HDMI Schnittstelle      1
Unterstützte Betriebssysteme      Windows XP, Windows Vista
Zubehör      Treiber CD
Packungstyp      Retail
Netzteil:
550Watt, ARLT Netzteil, 12cm Lüfter, 20+4pin, schwarz
Anschluß Mainboard
ATX (20pin. + 4pin. Buchse)
Anschlüsse Endgeräte
8x 4 Pin Stromanschlüsse (HDD), 2x 4 Pin Stromanschlüsse (FDD), 2x SATA Stromanschlüsse, 1x 6 Pin Stromanschluss (VGA), 1x 4 Pin Stromanschluss (CPU)
Eingänge
230V Netz
Leistung
550Watt
Lüfter
1x 12x12cm silent
Hersteller/Modellbezeichnung
Leistung
Hersteller      Arlt
Modellbezeichnung      LowNoise
Watt      550
Anschlüsse
ATX 12V Anschluss (4polig)      1
ATX Anschluss (20polig)      1
ATX 2.0 Anschluss (24polig)      1
S-ATA Stromanschlüsse      2
3,5" Anschlüsse      2
5,25" Anschlüsse      8
Eingangsspannung (V)      230
Sonstiges
Bauform      ATX
Lüfter (mm)      120
CPU Kühler:
Scythe Mugen 2 Rev. B, CPU Kühler für Sockel 1366/1156/775/478/754/939/AM2/AM2+/AM3/940
Hersteller      Scythe
Modellbezeichnung      Mugen 2 Rev. B
Material Kühlkörper      Kupfer / Aluminium
kompatible CPU Sockel      1366/1156/775/478/754/939/AM2/AM2+/AM3/940
Freigegeben bis (MHz)      alle Taktraten
Lüfterdrehzahl (U/Min)      1400
Geräuschentwicklung Betrieb (dB)      26,5
Abmessungen (BxHxT) (mm)      130 x 158 x 100
Gewicht (g)      870
Besonderheiten      bis zu 4 Lüfter verbaubar
mitgeliefertes Zubehör      Backplates
Schrauben
Installationsanleitung
Luftdurchfluss (m³/h)      126
Kühlung      aktiv
Cardreader:
Apacer AE700, Kartenlesegerät 30-in-1
intern, USB, Schwarz
Hersteller      Apacer
Modellbezeichnung      Embeded Card Reader AE700
Kartenleser Typ      30-in-1
Farbe (Gehäuse)      Schwarz
Anschluss      USB
Breite (mm)      101
Höhe (mm)      25
Tiefe (mm)      100
lesbare Formate
XD PictureCard      ja
mini-/micro SD      ja
SD Memorycard      ja
MultimediaCard      ja
Microdrive      ja
MemoryStick      ja
CompactFlash      ja
OS:
Windows 7 Professional 64-Bit System-Builder-Version
Windows 7 Professional 64-Bit System-Builder-Version, EnglischHersteller      Microsoft
Art der Software      Betriebssystem
Datenträger      DVD
Lizenz (Anzahl PC's)      1
Softwareversion      OEM
Produktaktivierung erforderlich      ja
2 x eSATA als PCIe:
Delock Controller Karte 2x eSATA, 2xSATA, 1x IDE
2x intern SATA oder 2x eSATA Spezifikation
1x intern PATA IDE Spezifikation
Datentransferraten:
SATA II bis zu 3 Gbps
PATA bis zu 133 Mbps
PCI Express x1 Standard
Unterstützt PCI Express 1.0a Spezifikation
Unterstützt bis zu 2 HDD am SATA, sowie 2 HDD am IDE Controller
Unterstützt Native Command Queue (NCQ)
Raid 0, 1
Festplatte:
2000GB Western Digital RE4-GP (WD2002FYPS)
3,5", Serial-ATA/300 (3Gb/s), 64 MB Cache
Hersteller      Western Digital
Modellbezeichnung      RE4-GP (WD2002FYPS)
Festplattenkapazität (GB)      2000
Bauart      intern
Formfaktor (Zoll)      3,5
Schnittstelle      Serial-ATA/300 (3Gb/s)
Umdrehungen / Min.      5.400 - 7.200 (dynamisch je nach Auslastung)
Geräuschentwicklung Betrieb (dB)      29
Geräuschentwicklung StandBy (dB)      25
Max. Transferrate (lesen) MB/s      110
Zugriffszeit (ms)      8,9
Cache (MB)      64
MTBF (h)      1.200.000
Gewicht (g)      730
Abmessungen (BxHxT) (mm)      101,6 x 26,1 x 147
Besonderheiten      Energiesparende Green Power Festplatte
Please have a look at my system and give me ideas how I could eventuially improve it.
regards

I agree completely with Harm. A 550W PSU of average (or middling) quality like the one that you have (which, by the way, is based on a CWT PSH or PSH-II platform) is not quite enough to power a power-hungry CPU like the i7-950 of yours, especially if a better-performing GPU such as the the GTX 560 Ti that Harm suggested is added along with two or more additional hard drives. (Your system currently has exactly two hard drives, which is the absolute minimum that you should have in an editing system unless you want performance to be slower than an old Pentium 4. However, one of those hard drives spins at only 5400 RPM - far from ideal for an editing system. You really want all of the hard drives inside that system to spin at 7200 RPM.)
Speaking of the GTX 560 Ti, you don't need the one with 448 cores since a non-overclocked (read: stock speed) i7-950 can't take full advantage of that higher-end GPU (and please note that the GTX 560 Ti 448 is actually a GTX 570 with one of its shader units disabled whereas the standard GTX 560 Ti is a different chip altogether). The standard GTX 560 Ti, with its 384 CUDA cores and a 256-bit DDR5 memory bus width, would suffice. However, if you do wish to overclock the i7-950 (to at least 3.8GHz), then the 448-core edition of the GTX 560 Ti would make more sense. (The 9500 GT that you currently have is not only old, it's slow and weak as well: It has only 32 CUDA cores, and it uses really, really crummy DDR2 RAM with only a 128-bit memory bus width. Such a card would have made the GPU-accelerated mode significantly slower than software-only mode during certain operations within CS5.x.)
By the way, I was wrong six months ago about the Dell systems sold during Fall 2011 that came with a 1.25GB version of the GTX 560 Ti: I had assumed that that card had 448 cores. Well, I did more research, and discovered that there was an OEM version of the GTX 560 Ti which did use a 320-bit DDR5 memory bus - but it had only 352 CUDA cores. It uses the same GPU as the GTX 570 and GTX 580, but with only 11 of its 16 shader units enabled, making it a GTX 570 with four of that GPU's shader units disabled. The Dell version of the GTX 560 Ti is, indeed, only a 352-core unit that was based off of a GTX 570. That made the Dell GTX 560 Ti expensive for what it is - at around $300, it cost as much money as the 448-core version of the GTX 560 Ti sold for around that time.

Process Improvement for Shopping Cart

I would like to have the availability to contact customer service regarding a recommended process improvement for Verizon customers. I have been a loyal Verizon since 2003, but my most recent experience is enough to drive me straight into the arms of T-Mobile and take them up on their offer to buy me out of all 6 contract agreements on my Verizon account.
I recently attempted to upgrade my device online. It was a relatively seamless process until I reached the end and got to the shopping cart. I elected to pick my phone up in the nearest store but to do so you have to pay online with a credit or debit card. You do not have the option to bill your account or pay in the store. As it turns out, the billing zip code that is associated with your credit card MUST match the service address zip code on your Verizon account. I am an identity theft victim and because of this all of my mail goes to a Post Office Box for security reasons. I obviously do not live in a Post Office Box, so my service address will never match the zip code on my billing address.
I am keenly aware that this is probably done for security reasons. Verizon doesn't want people obtaining a compromised account and sending a phone just anywhere. However, I was not opting to have anything shipped to me. I was picking up in the store so it should not matter what my billing zip code is.
The part that was most frustrating was the customer service individuals that I spoke with suggested things like (1) I should contact my bank and all of my bank statements and credit/debit card statements come to my house or (2) update my Verizon service address to the physical address of the Post Office even though I don't live there. When I was told to do option 2 listed above, I was told I had to log out of my account for the change to take effect and then re-log back in only to lose my entire order. All of this just to place an order and pick it up in a store. All I needed to do was just pay for my phone.
I next gave up and went in to the store. After an hour of waiting and trying to figure out where the problem was, the Verizon store couldn't take the coupon code that the customer service person had given me online. Translation - after all of this frustration with a dead-end result, I learned I was going to have to pay about $100 more for my phone. I walked away.
I went back online and the only option I had was to go back to square one and re-order online and this time, elect to have the phone shipped and billed to my account. I chose overnight shipping and just learned that the phone was shipped UPS ground and will be delivered after 5 days.
Needless to say, this has all been extremely disappointing and the most frustrating part is that it is all avoidable with a simple programming change. All of this was totally unnecessary. As an identity theft victim, I will NEVER have my mail delivered to the mailbox in my neighborhood. Does Verizon really want to offer that as a suggestion for people who want to buy a phone? Do they want to be responsible for the results? With identity theft being the fastest growing crime in America, somehow I just don't see that as a viable solution. There are many, many people just like me who don't have the same physical and billing addresses.
Finally, I will leave you with this question... Have you ever had this much trouble placing an order and paying for that order online? If I went to a store and purchased a phone in the store, would Verizon's payment processor care that the billing address on my credit card was different from the physical address where I live? NO! Companies are typically ready to take your money! It shouldn't be this hard to just pay someone for a phone.
If anyone can point me in the direction of how to make sure someone from Verizon Corporate is aware of this problem and that this is taken under consideration for future enhancements/changes to their eCommerce system it would be much appreciated.

Hi,
I think your process level evaluation id is not true, that is the reason system skips the process level.. Can you check your evaluation event-expression code. What do you see in SLG1? For testing purpose change the evaluation id to 0EV000 and check. Make Sure you debug through the user(requester) that you are creating the SC. Please test and let me know...
Saravanan

Improvements for IWork for iOS

I write to suggest improving your IWork for ios application.
The applications are very good, but lacks some important features that would help iPad -Iphone users to work better.
These absences are:
NUMBERS:
- filters
- sort by more criteria
- categories
- better use when a keyboard is attached in the iphone or iPad, it is no neccesary that the virtual keyboard appears all the time, please, let the user choose if he considers it is neccesary
- Landscape view in iphone
- Support for more functions
- Capacity to open bigger spreadsheets
I suggest to checo out the Polaris Office application, this one has some functions that are lacking in Numbers.
PAGES:
Please, a better way to insert: page jump, tab, etc. Maybe a button in the Toolbar.
IWORK FOR IPHONE: Besides the requirements listed above: a undo-redo button, because, it is very unconfortable to the user, shake his iphone when he has to undo or redo a lot of actions.
Thanks And
Best regards

https://discussions.apple.com/thread/4225179?tstart=0

Any room for improvement for this query? Explain Plan attached.

Is there any room for improvement for this query? Table stats are up-to-date. Any suggestions Query rewrite, addition of indexes,...etc ??
select sum(CONF
             when (cd.actl_qty - cd.total_alloc_qty - lsd.Q < 0) then
              0
             else
              cd.actl_qty - cd.total_alloc_qty - lsd.Q
           end)
from (select sum(reqd_qty) as Q, ITEM_ID as ITEM
          from SHIP_DTL SD
         where exists (select 1
                  from CONF_dtl
                 where CONF_nbr = '1'
                   and ITEM_id = SD.ITEM_id)
         group by ITEM_id) lsd,
       CONF_dtl cd
where lsd.ITEM = cd.ITEM_id
   and cd.CONF_nbr = '1'Total number of rows in the tables involved
select count(*) from CONF_DTL;
COUNT(*)
   1785889
select count(*) from shp_dtl;
COUNT(*)
    286675
Explain Plan
PLAN_TABLE_OUTPUT
Plan hash value: 2325658044
| Id | Operation                           | Name               | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT                    |                    |     1 |    39 |     4 (25)| 00:00:01 |
|   1 | SORT AGGREGATE                     |                    |     1 |    39 |            |          |
|   2 |   VIEW                              |                    |     1 |    39 |     4 (25)| 00:00:01 |
|   3 |    HASH GROUP BY                    |                    |     1 |   117 |     4 (25)| 00:00:01 |
|   4 |     TABLE ACCESS BY INDEX ROWID     | SHIP_DTL           |     1 |    15 |     1   (0)| 00:00:01
|   5 |      NESTED LOOPS                   |                    |     1 |   117 |     3   (0)| 00:00:01 |
|   6 |       MERGE JOIN CARTESIAN          |                    |     1 |   102 |     2   (0)| 00:00:01 |
|   7 |        TABLE ACCESS BY INDEX ROWID | CONF_DTL           |     1 |    70 |     1   (0)| 00:00:01 |
|* 8 |         INDEX RANGE SCAN            | PK_CONF_DTL        |     1 |       |     1   (0)| 00:00:01 |
|   9 |        BUFFER SORT                  |                    |     1 |    32 |     1   (0)| 00:00:01 |
| 10 |         SORT UNIQUE                 |                    |     1 |    32 |     1   (0)| 00:00:01 |
| 11 |          TABLE ACCESS BY INDEX ROWID| CONF_DTL           |     1 |    32 |     1   (0)| 00:00:01 |
|* 12 |           INDEX RANGE SCAN          | PK_CONF_DTL        |     1 |       |     1   (0)| 00:00:01 |
|* 13 |       INDEX RANGE SCAN              | SHIP_DTL_IND_6 |     1 |       |     1   (0)| 00:00:01 |
Predicate Information (identified by operation id):
   8 - access("CD"."CONF_NBR"='1')
12 - access("CONF_NBR"='1')
13 - access("ITEM_ID"="SD"."ITEM_ID")
       filter("ITEM_ID"="CD"."ITEM_ID")

Citizen_2 wrote:
Is there any room for improvement for this query? Table stats are up-to-date. Any suggestions Query rewrite, addition of indexes,...etc ??You say that the table stats are up-to-date, but is the following assumption of the optimizer correct:
select count(*)
from CONF_dtl
where CONF_nbr = '1';Does this query return a count of 1? I doubt that, but that's what Oracle estimates in the EXPLAIN PLAN output. Based on that assumption you get a cartesian join between the two CONF_DTL table instances, and the result - which is still expected to be one row at most - is then joined to the SHIP_DTL table using a NESTED LOOP.
If above assumption is incorrect, the number of rows generated by the cartesian join can be tremendous rendering the NESTED LOOP operation quite inefficient.
You can verify this by using the DBMS_XPLAN.DISPLAY_CURSOR function together with the GATHER_PLAN_STATISTICS hint, if you're already on 10g or later.
For more information regarding the DISPLAY_CURSOR function, see e.g. here: http://jonathanlewis.wordpress.com/2006/11/09/dbms_xplan-in-10g/
It will show you the actual cardinalities compared to the estimated cardinalities.
If the estimate of the optimizer is incorrect, you should find out why. There still might be some issues with the statistics, since this is most obvious reason for incorrect estimates.
Are your index statistics up-to-date?
Regards,
Randolf
Oracle related stuff blog:
http://oracle-randolf.blogspot.com/
SQLTools++ for Oracle (Open source Oracle GUI for Windows):
http://www.sqltools-plusplus.org:7676/
http://sourceforge.net/projects/sqlt-pp/

Suggested improvements

Installation
1. Remove the PKGADD dependancy. Pkgadd requires root access to a
machine, iPS is likely to be installed by developers, not sysadmins.
2. Install Java in the same directory tree as iPS. too many applications
use /usr/java and expect different java versions.
3. Include 'optimization' settings; i.e java flags, documented in the
release notes as part of the install.
4. During install request a username to run the gateway, web server and
ldap server as. Again changing this is documented as an option in the
release notes. If installing as a non-root user, this user should be
used.
Admin.
1. Make gateway url rewriting changes on a per machine basis. Too many
sites use the same javascript variables, i.e; url, src, pathname, html;
some sites require rewrites others do not.
2. Add comment fields to the admin interface, if I make a change I want
others to know why.
3. Provide backup/restore scripts. As part of the development/production
phase I've written scripts to make an image of a production ips setup,
which I can then install on a development system. A few 'sed' statements
deal with the new hostname and IP addresses, and a few 'pkginfo' checks
need removing, but this works.
Support.
1. Make 'Hot Patches' available on the iPS web site. Or a minimum the
release notes, so I know whether I need it.
2. List 'public' versions of bugs/rfe's on the iPS web site. Something
similar to 'SunSolve' would be great. If I have a problem I can save a
lot of time by finding a bug report online. Most technical Sun/Netscape
customers rarely ever use telephone support.
3. Remove the 'black box' support restrictions on the LDAP and web
servers. If I want to add a CGI script to my web server, iPS should
still be supported, just not my CGI script.
Licensing.
1. Remove the crazy per CPU prices for the 'secure' version. All this
is, is an implementation of the Mozilla NSS code which is freely
available. Many companies offer faster H/W SSL solutions at far lower
prices. Whether the URL rewriter is only available as part of the
'secure' version I've never had a clear answer.
2. List prices on the iplanet web site. When I try a product I want to
know how much it'll cost me, and right now I have to have an iplanet
sales rep visit me ...I hate sales reps :)
You may not believe it from the above, but I do like the product.
-Mark

Mark,
Thank you for this good list of suggested improvements. I've forwarded it
to the iPS product manager.
WRT the one about licensing for the secure version, let me try to give a
clear answer. The extra licensing fees for "secure" mode is for the
gateway component of iPS and the features it provides. This includes:
     - reverse proxy with URL rewriting
     - netlet VPN
     - certificate-based authentication
The term "secure" in this context can be a bit confusing. It does not
refer to whether the iPS itself is access using SSL. Rather, it refer to
the security of the entire intranet that is accessible via the portal. In
secure mode, the only access point for the entire intranet is the iPS
gateway, so the intranet can be made secure. In open mode, the iPS server
is accessed directly as are any other web servers in the intranet because
there is no gateway. Even in open mode, the iPS server can be configured to
use SSL. But that doesn't do anything about the other web servers and
resources that might be necessary for a complete portal solution.
HTH.
Tom
Mark Godiver wrote:
>
Installation
1. Remove the PKGADD dependancy. Pkgadd requires root access to a
machine, iPS is likely to be installed by developers, not sysadmins.
2. Install Java in the same directory tree as iPS. too many applications
use /usr/java and expect different java versions.
3. Include 'optimization' settings; i.e java flags, documented in the
release notes as part of the install.
4. During install request a username to run the gateway, web server and
ldap server as. Again changing this is documented as an option in the
release notes. If installing as a non-root user, this user should be
used.
Admin.
1. Make gateway url rewriting changes on a per machine basis. Too many
sites use the same javascript variables, i.e; url, src, pathname, html;
some sites require rewrites others do not.
2. Add comment fields to the admin interface, if I make a change I want
others to know why.
3. Provide backup/restore scripts. As part of the development/production
phase I've written scripts to make an image of a production ips setup,
which I can then install on a development system. A few 'sed' statements
deal with the new hostname and IP addresses, and a few 'pkginfo' checks
need removing, but this works.
Support.
1. Make 'Hot Patches' available on the iPS web site. Or a minimum the
release notes, so I know whether I need it.
2. List 'public' versions of bugs/rfe's on the iPS web site. Something
similar to 'SunSolve' would be great. If I have a problem I can save a
lot of time by finding a bug report online. Most technical Sun/Netscape
customers rarely ever use telephone support.
3. Remove the 'black box' support restrictions on the LDAP and web
servers. If I want to add a CGI script to my web server, iPS should
still be supported, just not my CGI script.
Licensing.
1. Remove the crazy per CPU prices for the 'secure' version. All this
is, is an implementation of the Mozilla NSS code which is freely
available. Many companies offer faster H/W SSL solutions at far lower
prices. Whether the URL rewriter is only available as part of the
'secure' version I've never had a clear answer.
2. List prices on the iplanet web site. When I try a product I want to
know how much it'll cost me, and right now I have to have an iplanet
sales rep visit me ...I hate sales reps :)
You may not believe it from the above, but I do like the product.
-Mark

Suggest EnhanceMent For SALES area determination In stock Transfer.

Suggest EnhanceMent For SALES area determination In stock Transfer.
V02V0001 Sales area determination for stock transport order Doesnt Work,

Is user exit required, as the sales area will be different. Incase of Intra company stock transfer the process will be as under:
Create Purchase Order (ME21N)
Create Delivery in background (VL04, VL10a, VL10C, etc)
Change Delivery for picking / packing & PGI (VL02n)
Create Billing Document (VF01)
Assumption: Stock Transfer configuration is in place. Assistance can be taken from SAP Best Practices in help.sap.com
Incase of Inter-company, the process will be as under:
Create Sales Order (VA01)
Create Delivery (VL01N, etc)
Change Delivery (VL02N)
Create Billing Document (VF01)
Assumption: Configuration is in place. Assistance can be taken from SAP Best Practices in help.sap.com
Regards,
Rajesh Banka

I cannot access Content Library in iMovie - Content Library doesn't show on the iMovie screen and is greyed out when accessed through "windows" tab at the top. Also unable to update the projects/events (a suggested solution for a similar question).

I cannot access Content Library in iMovie - Content Library doesn't show on the iMovie screen and is greyed out when accessed through "windows" tab at the top. Also unable to update the projects/events (a suggested solution for a similar question). I haven't had this issue before, I have always used the content library on the screen but haven't used this for about a month. How can I make the Content Library available?

Thanks so much! I am backing up the entire computer now with an external hard drive - this should be fine right? And surely if I am backing up the whole computer these projects/videos will be backed up too? I wasn't sure how to do this any other way and I am clearly not great with tech issues. Once this is done and I am sure my projects/videos are safe I will do the delete and reinstall bit. Thanks for taking the time to help

Suggest BAPI for change notification IW52

Hi,
Kindly suggest BAPI for change notification IW52.
Regards,
Tanaya

How to find function module or Bapi for particular transaction in sap?
If you mean that you need to know what BAPI's a particular tranx uses, which I can only assume that's what you mean, then you should access the code behind the transaction and search for 'CALL'. That normally is the standard method that think that most people use.
Suppose you want to find the bapi for creating a sales order, you usually use transaction VA01 for this.
1. Find out the package of the transaction.
Start Va01 go to system --> status.
Double click on transaction
Package is VA
Open this package in SE80
Open business engineering-->Business object types
Find the BO which sounds the most appropriate
I would suggest BUS2032 Sales Order
Double click.
Open methods.
Find the released method with from data or something similar in the name
, Createfromdat2
Position the cursor in it and click the program button
Scroll down to find the bapi used in this method
With this way you can also find out programs and FM's
2. Start va01 go to system-->status
Double click transaction VA01
Double click on package
Read the application component. (this is SD-SLS Sales)
Then open the transaction BAPI
Sales and distribution>Sales>sales order
createfromdat2
Answer: This is the BAPI for your mentioned transaction code BAPI_GOODSMVT_CREATE.
thanks,
Sankar M

DMA Performance Improvements for TIO-based Devices

Hello!
DMA Performance Improvements for TIO-based Devices
http://digital.ni.com/public.nsf/websearch/1B64310FAE9007C086256A1D006D9BBF
Can I apply the procedure to NI-DAQmx 9? These ini-files dont seem to exist anymore in the newer version.
Best, Viktor

Hi Viktor,
this page is 7 years old and doesn't apply to the DAQmx.
Regards, Stephan

Suggested Improvements for DW6

Similar Messages

Maybe you are looking for