Suggested procedure for safe updating of Safari to v. 3.2

If your Safari keeps crashing, or if you are updating Safari (or just have):
N.B. Never delete Safari, never run it under Rosetta, don't use proxy settings.
(If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Safari 3.2 for download can be found here:
http://www.apple.com/safari/download/
Make sure you download the correct version for your system.
Also, observe the standard procedure for installing software: repair permissions and close all applications, install, then repair permissions again.)
Input Managers and other plug-ins from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was not a beta and which was updated to v.3.1.2, and now both Tiger and Leopard uses Safari 3.2. If Safari 3.2 is not the fastest browser you have ever used, then something is wrong!
(Trying to revert to a previous version of Safari can have repercussions, as Safari 3.x uses a completely different webkit on which other applications like iChat, Mail, Dashboard Widgets etc also rely, but if you really want to do this post back in a new thread for instructions on the safe way to do so.)
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Add-ons that have been frequently mentioned here, among others, for causing such problems are Piclens, Saft, AcidSearch and Pithhelmet. If you have them, trash them and go the developer's sites to see if new versions are available for Safari 3.2.
You should also ensure that you have downloaded and installed the correct version for your Mac of Security Updates up to 2008-007, which is required for Safari 3.2. Like all security updates, these require a restart and a permission repair. Note that 2008-007 is a combo update: if you have missed a couple of updates this one will suffice.
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
• Hard Disk/Library/InputManagers
• Home/Library/InputManagers
especially prior to system updates and updates to Safari (they can always be added back one-by-one later).
Please do not respond to this post if you are having difficulties, or ask your questions in somebody else's thread, but start your own thread where your particular problem can get the full attention it deserves.

Bump.
Upgrading PithHelmet stopped my crashing.

Similar Messages

Procedure for filing/updating TDS returns(certificates/challans)

Hi All,
As far as TDS configuration is concerned, I need the info on the process on how to file the TDS returns are concerned, updating the challans etc.
The steps that I've configured are: withholding tax types, codes, rounding off etc all such steps which are enabling me to get the TDS deducted for each vendor in J1INMIS, however I'm encountering problems in certificate number ranges and I'm getting confused.
Plz suggest in going about for being able to get the report on total TDS deducted and updating the certificates
regards
kim

Dear Venkatesh,
Thank you for replying.
I did maintain as you had suggested to me. Now I'm facing a new problem.
The bold text is exactly, what I've copied from the system's error message and pasted it across here.
No unpaid tax lines exist for the given selection criteria.
Message no. 8I702
Diagnosis
The corresponding withholding tax line &1& is not present in WITH_ITEM table.
System Response
For withholding tax recovered from the vendor, tax line is present in table BSIS, but the corresponding entry is missing in table WITH_ITEM , which is necessary for challan updation. Check the entries.
Procedure
check entries in table WITH_ITEM for the open tax items chosen for clearing.
Now, I dont have a clue to go further from here. Plz suggest, if there's something else for me to go ahead with.
I appreciate you for your answer coz that's taken me a step further is what I feel.
I'm sorry I've assigned only 2 points, coz I've used up the max llimit of being able to assign 6 points, If my problem is solved, I'll make it sure I'll assign 10 points
thnx once again
Rgds
kim

Forms 6i problem in procedures for make update

dear sirs,
i had procedure to make update for tree of accounts, but make update to some levels and other level no, and here is the procedure if inside it any problem pls advice me
CREATE OR REPLACE PROCEDURE updup_acc_trbal2(
wyear IN NUMBER ,
wperiod IN NUMBER ,
wcost_center IN VARCHAR2 ,
wacc_no IN VARCHAR2,
wcurr_code IN VARCHAR2 ,
lval_db IN NUMBER ,
lval_cr IN NUMBER ,
val_db IN NUMBER ,
val_cr IN NUMBER )
IS
BEGIN
declare
------------acc----
acc_a varchar2(15);
acc_b varchar2(15);
cost_a varchar2(15);
cost_m varchar2(15);
cursor c0 is
select a1,a2,a3,a4,a5,a6,a7,a8 from acc_master_file
where acc_no = wacc_no;
type acc_arr0 is table of varchar2(15)
index by binary_integer;
arr_acc acc_arr0;
i binary_integer:= 0;
-------------cost----
cursor c is
select c1,c2,c3,c4,c5,c6,c7,c8,c9 from cost_tables
where cost_center = wcost_center;
type acc_arr is table of varchar2(15)
index by binary_integer;
cost_acc acc_arr;
i_cost binary_integer:= 0;
begin
open c0;
fetch c0 into arr_acc(1),arr_acc(2),arr_acc(3),
arr_acc(4),arr_acc(5),arr_acc(6),
arr_acc(7),arr_acc(8);
close c0;
open c;
fetch c into cost_acc(1),cost_acc(2),cost_acc(3),
cost_acc(4),cost_acc(5),cost_acc(6),
cost_acc(7),cost_acc(8),cost_acc(9);
close c;
i := 0;
i_cost := 0;
loop
i_cost := i_cost + 1;
exit when (i_cost > 9);
loop
i := i + 1;
exit when (i > 8);
acc_a := arr_acc(i);
cost_a := wcost_center;--cost_acc(i_cost);
cost_m := cost_acc(i_cost);
acc_b := wacc_no;
if cost_m is not null then
if acc_a is not null then
if acc_a <> wacc_no then --v then
if cost_m <> wcost_center then
update cost_bal
set tr_deb = nvl(tr_deb,0) + nvl(lval_db,0),
tr_cr = nvl(tr_cr,0) + nvl(lval_cr,0),
c_tr_deb = nvl(c_tr_deb,0)+ nvl(val_db,0),
c_tr_cr = nvl(c_tr_cr,0) + nvl(val_cr,0)
where year = wyear
and period_no = wperiod
and acc_no = acc_a
and cost_center = cost_m wcost_centercost_a
and ((curr_code = wcurr_code
and wcurr_code is not null)
or(curr_code is null
and wcurr_code is null));
if sql%notfound then
insert into cost_bal
(year,period_no,cost_center,acc_no,curr_code,
op_deb,op_cr,c_op_deb,c_op_cr,
tr_deb,tr_cr,c_tr_deb,c_tr_cr,
created_by,created_date,
changed_by,changed_date)
values
(wyear,wperiod,cost_m,acc_a,wcurr_code,
0,0,0,0,
nvl(lval_db,0),nvl(lval_cr,0),nvl(val_db,0),
nvl(val_cr,0),user,sysdate,null,null);
end if;
end if;
end if;
end if;
end if;
end loop;
end loop;
end;
END updup_acc_trbal2;

Please use below one:
BEGIN
if filename is null then
filename := 'E:\STUDY\experiences\forms\tour\countries.txt';
end if;
MYFILE := TEXT_IO.FOPEN(FILENAME, 'R');
SYNCHRONIZE;
LOOP
TEXT_IO.GET_LINE(MYFILE, LINEBUF);
temp := temp + (length (LINEBUF));
go_block('COUNTRIES');
last_record; ---------------------------------
next_record; ----------------------------------
:country_code := LINEBUF || CHR(10);
create_record;
END LOOP;
EXCEPTION
when no_file then
message('you can not access here. ' );
END;

How to create stored procedure for insert update and delete operations with input output paramters?

I have the follwing table is called master table contain the follwing fields,
So here i need to create three Stored procedures
1.Insert operations(1 o/p paramter,and 14 input paramters) - uspInsert
2.Update operations(1 o/p paramter,and 14 input paramters) - uspUpdate
3.Delete Operations(1 o/p paramter,and 14 input paramters)
- uspdelte
The following is the table ,so using this to make the three sp's ,Here we will use Exception machanism also.
Location
Client Name
Owner
ConfigItemID
ConfigItemName
DeploymentID
IncidentID
Package Name
Scope
Stage
Type
Start Date
End Date
Accountable
Comments
So can u pls help me out for this ,bcz i knew to stored procedure's creation.

I have the follwing table is called master table contain the follwing fields,
So here i need to create three Stored procedures
1.Insert operations(1 o/p paramter,and 14 input paramters) - uspInsert
2.Update operations(1 o/p paramter,and 14 input paramters) - uspUpdate
3.Delete Operations(1 o/p paramter,and 14 input paramters) - uspdelte
The following is the table ,so using this to make the three sp's ,Here we will use Exception machanism also.
Location
Client Name
Owner
ConfigItemID
ConfigItemName
DeploymentID
IncidentID
Package Name
Scope
Stage
Type
Start Date
End Date
Accountable
Comments
So can u pls help me out for this ,bcz i knew to stored procedure's creation.
Why you have to pass 14 parameters for DELETE and UPDATE? Do you have any Primary Key? If you do NOT have primary key in your table then in case you have duplicate information, SQL will update both or delete them together. You need to provide DDL of
you table. What are the data types of fields?
Best Wishes, Arbi; Please vote if you find this posting was helpful or Mark it as answered.

Using stored procedures for insert, update and delete

Hello all;
We have a question from our customer (who is the DBA), who has not in the past used TopLink, about whether it makes sense to tie TopLink into existing stored procedures to save and retrieve informations.
Is it possible?
Is there any circumstance under which it is a good idea?
Thanks

In TopLink any operation for which TopLink generates SQL, can be replaced by custom SQL, or a stored procedure call.
Custom SQL or stored procedures can be used for each of the descriptor's CRUD operations, but also for mapping queries and named queries. The Mapping Workbench only supports defining custom SQL for the descriptor CRUD operations and named queries, so many of the stored procedures call from the descriptor and mappings will need to be done through amendment methods.
Whether it makes sense or not depends on the application and the company and their requirements. It will add significant overhead to the development process to have to define and maintain all of the stored procedures, and the stored procedure calls in the descriptors. You may wish develop your application using TopLink generated SQL, and once you have the model and queries stabilized then switch to using stored procedures.
Whether it is a good idea depends on the application and the company and their requirements. Stored procedures may give the DBA more freedom to change the data-model once in production, and may allow for adding database-level security checks. In general using stored procedures will not improve performance if the procedures contain the same SQL that would have be executed anyway, but they may allow for the DBA to tune the SQL better.

How to opt out of Apple Software Update's Safari installation

I do not have Safari installed on my computer, and I have no interest in installing it or switching to it. However, the Apple Software Updater displays Safari as a selected option every time it runs. I can unselect the option to install Safari, but I don't see any way to remove Safari from the list entirely so that Software Update doesn't keep pestering me about installing Safari every few days. Surely there must be some way to opt out of installing Safari short of uninstalling Software Update and never using it again?

That answer really does not deserve a "solved" star, as we get nagged again for every update of Safari. The ignore "trick" is IMHO merely an inadequate workaround for a nuisance that should not exist.
ASU should UPDATE not shove software I or rather, my userbase does not have installed, down our throats.
Apple should at least have the decency to NOT have Safari Pre-checked in ASU. Yes, M$ has new software in Wondows Update as well (e.g. Silverlight), but at least it's an opt-in update, while Apple force-feeds us Safari which I find beyond annoying.
If M$ would do the same with the next version if IE on Macs, Mac users would scream so loud you would be able to hear it on the ISS.
Max G. Schmitt
Systems and Network administrator (MCSE)

I can't update my safari 7.0.6 It says recommended for all OS X Mavericks users. Any suggestions?

Can't update my safari 7.0.6. Need help here!

You haven't told us anything about what you've tried, what error messages you've seen etc.
To update Safari, assuming you're running OS X Mavericks, open the App Store, go to the "Updates" tab on top, and find and download Safari from there.

I cannot access Content Library in iMovie - Content Library doesn't show on the iMovie screen and is greyed out when accessed through "windows" tab at the top. Also unable to update the projects/events (a suggested solution for a similar question).

I cannot access Content Library in iMovie - Content Library doesn't show on the iMovie screen and is greyed out when accessed through "windows" tab at the top. Also unable to update the projects/events (a suggested solution for a similar question). I haven't had this issue before, I have always used the content library on the screen but haven't used this for about a month. How can I make the Content Library available?

Thanks so much! I am backing up the entire computer now with an external hard drive - this should be fine right? And surely if I am backing up the whole computer these projects/videos will be backed up too? I wasn't sure how to do this any other way and I am clearly not great with tech issues. Once this is done and I am sure my projects/videos are safe I will do the delete and reinstall bit. Thanks for taking the time to help

I have just updated to iOS7, no icon for browser, was using Safari, how do I get it back and can I reverse the upgrade and go back to iOS6?

I have just updated to iOS7, no icon for browser, was using Safari, how do I get it back and can I reverse the upgrade and go back to iOS6? Thanks to you from the UnTechie

The icon for Safari has probably moved to make room for new apps. Scroll the Home screen to look for it.
You cannot reverse the upgrade.

Have updated from Snow Leopard to Lion with Safari Version 5.0.5. Now I can not update to Safari 5.1. There is no update in the Software Updater, and on the apple-download page, I only found a Safari 5.1 for Snow Leopard. When executing it, there is an e

I have updated from Snow Leopard to Lion with Safari Version 5.0.5. Now I can not update to Safari 5.1. There is no update in the Software Updater, and on the apple-download page, I only found a Safari 5.1 for Snow Leopard. When executing it, there is an error message, that it is for 10.6 only.
It seems that I should have first updated Safari, and then only to Lion, which I didn't. Any idea how I can fix this now without having to rollback to Snow Leopard, update Safari and then go back to Lion?

Try this Safari5.1 from the installer package
http://www.filefactory.com/file/cc9005d/n/Safari.pkg.zip
The download worked better with Firefox not sure why. At the bottom of the page after the captcha>> slow down load is the Free link, it took about 4 minutes to download on my test.

When I check for software updates only itunes and random other updates show up but not security updates or safari update. When i check installed updates I realized my last security update was 2011-004 and I still have safari 5.0.6. Can anyone help me?

When I check for software updates only itunes and random other updates show up but not security updates or safari update. When i check installed updates I realized my last security update was 2011-004 and I still have safari 5.0.6. Can anyone help me?

Don't panic. OS X 10.5.8 is the most popular PowerPC OS out there. People run it everyday without security breaches, including myself. It isn't Windows!
If you're really that worried, I highly recommend Sophos Anti-Virus for Mac Home Edition. Supports PowerPC & Intel and Mac OS X 10.4-10.7.
http://www.sophos.com/en-us/products/free-tools/sophos-antivirus-for-mac-home-ed ition/system-requirements.aspx
Direct download: http://downloads.sophos.com/home-edition/savosx_73_he.dmg

Block with more than one table type agurment - Update Procedure for Block

Hi,
I have one form with 3 Block. First Block is single row block, and other 2 are details block . The details balocks are based on the Procedure datasource, because of the complex query conditions. Now my requirement is When Inserting / Updating the Master Block (Single Row Block), I need to get the values in the two details block , because I need to update some other tables also based on these values. I created a procedure with two Table Type parameters (for each details block) , but when I using this procedure as the Update Procedure Name in the block, I am getting the error Only One table type arguement is allowed. Is there any other method to implement this.
Thanks in advance.

Rizly,
A quick summary to make sure I understand your requirements. You have a single row base table master block with two detail blocks that are based on Procedures. When you update the single row base table master block, you need all of the data in the two procedure based detail blocks as there are updates that you have to perform to other tables that use this data. You have created a stored procedure that take two PL/SQL tables as parameters, but you are getting the error that only 1 table parameter is allowed.
I need to ask you a few questions first. What is your Forms version? The stored procedure you created; are you using this procedure in the "On-Insert, On-Update, On-Delete" triggers or do you call the procedure in one of the Base Table block ("Key-Commit, When-Button-Pressed" or other trigger)? When you modify or add a new Master block record are you adding values to the detail blocks or using values from the previous Master block record?
If you are using your procedure in the On-Insert, On-Update or On-Delete trigger(s), then based on your description, the error you are receiving is correct. The "On-..." triggers are constrained in that their procedures expect only a single PL/SQL table, Table of Records or Ref Cursor as a parameter. This is a Forms constraint - not a PL/SQL constraint as Forms is expecting you to only perform actions on the block where the "On-..." Trigger is located.
Perhaps you should consider creating a database Package that has two package specification constructs (Ref Cursor, Table of Records, etc) you can populate from Forms and then simply call the package procedure that will use the Ref Cursors to perform the needed update or inserts.
Hope this helps.
Craig...
If mine or someone elses response was helpful, please mark it accordingly

Need suggestion for Column update in query results

While generating reports using Oracle 10g SQL Query, we need to update the few of columns data with business calculations. We are processing large amount of data. Kindly suggest us, for the best method to achieve this.

i don't know about Oracle 10 SQL Query but i wouldn't mix reporting with data calcuations which is stored persistent in the database. I would separate them, e.g. you could create a database-job to execute your updates at a specific time each day.
hope this helps

Stored Procedure for updating dynamic columns in a table

I have a table with a lot of columns around 30ish
Now I want to create a stored procedure that will update a specific column to a new value.
I the @columname and @newvalue to be the parameters, and an addition @itemId for the WHERE clause so it will update that specific row/data only.
here's my Stored Procedure
USE [db]
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[usp_UpdateData]
@itemID int,
@ColumnName varchar(50),
@newValue nvarchar(50)
AS
BEGIN
Update dbo.ProjectAllocation
Set @ColumnName = @newValue
Where itemID = @itemID END
When I pass the following
@ColumnName: UserName
@newValue: NewUserName
@itemID: 1
it doesnt update row with itemID = 1.
How can I do this?
----------------------- Sharepoint Newbie

Did you try my last post method. Its better to use parameterized approach.
Anyway, if you want to change your code,you may need to change as below.....
SET @sql = 'UPDATE dbo.table SET ' + @ColumnName + '=''' + @newValue + ''' WHERE [itemID] = ' + cast(@itemID as varchar(50));

Update my app. What is the correct procedure for updating an app/folio?

I designed a folio in Indesign CS6 and created an app of the folio in adobe dps and succesfully uploaded it to the app store. Now I want to update my app. What is the correct procedure for updating an app/folio?

no, just update your content and recreate the Single Edition App. Your certificate should still be valid so there is not need to recreate these.
... your App ID absolutely need to be the exact same one you used for the first version if you want to make sure this is an update.

Suggested procedure for safe updating of Safari to v. 3.2

Similar Messages

Maybe you are looking for