Suggested Resolution & Refresh Rate for 19-inch Monitor

Just had to replace my old 17-inch Apple Graphite Display. I stayed with a CRT and found a new 19-inch Dell M993s for pretty cheap.
Now I'm trying to decide what the best screen resolution and refresh rate is...
The HTML files that came on the Dell CD-ROM give recommended optimal settings for Windows OS's. But I'm not sure I should go by those for Tiger.
Any suggestions?

Just to make it completely clear
You need to have the screen refresh rate set above 75hz so that screen refresh is less visible, the lower the number the slower the refresh rate and therefore the more visible it is and the more strain on the eye. The higher the refresh rate the better.
Find the resolution which gives you 85hz or higher and which also makes best use of screen without making everything really small and hard to see or to read.
I have a 19" Lacie and have it set to 1280 x 1024 85hz refresh rate.
Mark

Similar Messages

  • PowerMac G4 533DA & HDTV - video resolution / refresh rate problem

    Hope someone can help, I need to access more resolution / refresh rates than I currently get in the Leopard display control:
    I have a PowerMac G4 533 Digital Audio running Leopard 10.5.8 (unsupported).  It has an upgraded AGP videocard, a ( flashed PC - RV200 chipset) Radeon 7500 w/ 64MB and a DVI output w/ a VGA adapter.  I have used this Mac perfectly with my 19" widescreen Samsung SyncMaster 940BW, at a resolution of 1440 x 900 / 60Hz / millions of colors.  This monitor is actually for my MacPro, but I used it for the G4 to set it up.
    I  moved it to my living room to use as a basic HTPC.  Since it runs Leopard, it has up to date VLC, Quicktime for video files and a working Superdrive for movies.  I don't expect it to play anything more than 480p properly, I think that was the best I got on YouTube.  But if I have a DVD ripped to DivX or MP4 it plays them fine on the Samsung monitor.
    I connected it to my Viewsonic N3760w 37" 1080 HDTV.  It turns on, gray screen w/ Apple and gives me a working desktop.  The problem is that I cannot get it to give me the correct resolution and more importantly it seem to have the wrong refresh rate.  It is currently set at 1280 x 768 / 60Hz / millions of colors.  The screen give me like a small line slowly moving up across screen, higher refresh rates only make it movie faster up the screen.
    According to my Viewsonic, these are the resolutions for computer using the VGA plug on the tv:
    PC - 1360x768 (preferred) , 1024x768, 1280x768
    Mac G3/G4/G5 - up to 1280 x 1024, 1280x720 (preferred)
    Please note all of these are lower resolution than my Samsung monitor.  My Viewsonic also has on screen adjustment of " phase " and " frequency " as well as the usual color, contrast, etc available.  Is there a 3rd party app to manually adjust the resoluion and refresh rate?  I have seen Windows programs, does one exist for Mac OS X?
    TIA, sorry for the long post

    My Viewsonic also connected by VGA, no problem.
    I wish I knew more. I checked out the app you did a trial of. I noticed this statement on their web site:  Quote
    "After rebooting monitor stays blank
    For some reason your monitor does not accept the installed frequency. SWITCH IT OFF!"
    This is the type of statement that would 'worry me.' -- having the phrase: SWITCH IT OFF! all in caps seems to imply a possibility of damage...which I mentioned in my initial post. (and the site goes on to talk about how you should even then connect another monitor to change the settings you've made that were not accepted).
    As I said, though, I wish I knew more for sure about this. It seems that you not only did the obvious of checking System Peferences>Display, but also realize the Viewsonic has buttons that can influence it's screen image, most about position of the image on the screen but at least one item about resolution on mine. (under Setup Mode)
    For what it's worth, my Viewsonic is about 6 years old now, still fine, and has eight (8) possible resolutions shown in System Preferences.
    Re: Your numbers.
    It is currently set at 1280 x 768 / 60Hz / millions of colors. 
    PC - 1360x768 (preferred) , 1024x768, 1280x768
    Mac G3/G4/G5 - up to 1280 x 1024, 1280x720 (preferred)
    If you're only talking about a difference of 1280 x 768 and G4 1280 x 1024, perhaps just stretching the picture using the Viewsonic buttons is the way to go.
    Or, from the numbers, perhaps the G4 just wants a resolution closest to it's preferred state!?
    Anyhow, good luck.

  • The refresh rate for Mac mini 2014 at 3840x2160 using Thunderbolt

    Here: http://www.apple.com/mac-mini/specs/
    , it says that the refresh rate for resolution 3840x2160 for HDMI is 30 Hz.
    I'm wondering if it's the same using Thunderbolt, or more correctly DisplayPort.
    Thanks!

    MacMagnus wrote:
    Ok, thanks!
    If I could ask another question regarding this... is 30 Hz poor even for desktop work? Or movies.
    I believe the 30Hz is progressive and therefore for movies/video would normally look quite good. However for sports e.g. soccer which has a fast moving object i.e. the ball it would be less good. I have also seen comments suggesting that for computer use it is also less desirable particularly when you are scrolling as this entails affectively the entire screen image 'moving fast'.
    This is not based on personal use as I cannot afford a 4K screen yet myself. However for DVDs 24p is considered a to give a good image for movies and this I can confirm from personal experience so 30p should be even better. Obviously 60p is better still but for that you need either a Mac Pro, iMac or MacBook Pro Retina.
    It is probably going to depend on what you will be using it for. Perhaps you should consider spending a little more for a MacBook Pro Retina which can do 60 Hz.
    See Using 4K displays and Ultra HD TVs with Mac computers - Apple Support

  • Satellite A100-153: What are verical and horizontal refresh rates for my display

    How can I found out what are verical and horizontal refresh rates for my display?

    Hi
    Do you mean the vertical and horizontal display resolution???
    Anyway all informations should be listed in the user manual.
    I dont know exactly what appendix is it but it must be placed somewhere at the end of the user manual.
    Such infos are listed also in my user manual which was delivered and preinstalled on my Satellite notebook.

  • I hit the wrong monitor refresh rate and now lost monitor picture.  How can I get back to the right refresh rate with no pic to view?

    I hit the wrong monitor refresh rate and now lost monitor picture.  How can I get back to the right refresh rate with no pic to view?

    Try this:
    Mac OS X 10.6 Help: If you changed your display’s resolution and now it doesn’t display a picture

  • How to change the UWL refresh rate for all portal users.

    Hi Portal Experts,
    How to change the UWL refresh rate for all portal users?
    Users can individually change the refresh rate through "Personalise View" in UWL.But we want this to set it for all users(we have 10k portal users).
    It was defaultically set to 5 mins for all users.How to change this to 20 mins.
    Thanks
    Sony.

    1.      Launch the UWL iView configuration page.
    You can access the iView from the UWL administration pages (System Administration ® System Configuration). Navigate to the property editor as follows:
          From the Universal Worklist Systems, choose the system for which you want to edit the properties.
        Choose Edit.
    may be you can get clear help from below help file
    http://help.sap.com/saphelp_nw04s/helpdata/en/eb/101fa0a53244deb955f6f91929e400/frameset.htm
    regards
    nagaraju

  • Judder using Mplayer... maybe force different resolution/refresh rate?

    Hi!
    (I posted this in the newbie section too, but this is maybe the most appropriate place??)
    I've set up my computer as a media center using Freevo. As the main media player in Freevo I use Mplayer. The setup is working beautifully, but I'm getting some judder and it's a bit annoying. It's most noticable during bright, fast moving scenes.
    So I've been trying to figure out how to remedy this, but it's harder than I thought. My setup is the following:
    AMD 4200+ dual core, 2 gigs ram, Nvidia 7800GTX, 24" LCD and Pioneer LX508D plasma TV, and I'm using CoreAVC as decoder (amazing piece of software )
    When I bought the 24" screen for my computer the sales guy (using windows) forced the resolution to 1920x1080. It looked a bit stretched, but if I could do this in Linux I'd avoid having parts of the picture missing on my TV. Now I have to use 1920x1200 resolution as main X session and since my TV is 1920x1080 parts of the desktop is out of view on my TV. This isn't too big of a deal though cause when playing movies they come out in 1920x1080. It'd be nice though to get the correct aspect ratio between my pc screen and my TV (I've been trying to use Twinview and clone, but it's impossible to use 1920x1200 on the 24" and 1920x1080 on the TV at the same time). I've tried to force my pc screen to use 1920x1080 (since it worked in windows it's supposed to be possible), but when I enable it through xorg.conf the screen goes blank. Using nvidia-settings doesn't give me the option of using 1920x1080 on the 24" at all.
    So what I'm hoping to be able to do is to force the computer screen to use 1920x1080 and a refresh rate of 72Hz. This should eliminate alot of the judder and at the same time I won't have to use the "PC mode" on my TV (PC mode restrict the Hz to max 60Hz). Hopefully the TV will accept the 1920x1080 72Hz as any input and let me use the normal input (and then be able to use 72Hz... or 96Hz for that matter).
    Anyone know how I might be able to do that? I'd really appreciate any help at all since this is the only thing that's not perfect with my setup.

    Ok, I tried to change the xorg.conf file to 72Hz on the TV and it when black again. This is what the xorg.0.log shows:
    X.Org X Server 1.4.2
    Release Date: 11 June 2008
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.25-ARCH i686
    Current Operating System: Linux arch 2.6.25-ARCH #1 SMP PREEMPT Mon Jul 14 15:25:51 UTC 2008 i686
    Build Date: 21 June 2008 05:47:59PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 19 13:36:04 2008
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "X.org Configured"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Videocard0"
    (**) |-->Input Device "Mouse0"
    (**) |-->Input Device "Keyboard0"
    (**) Option "Xinerama" "0"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/share/fonts/Type1" does not exist.
    Entry deleted from font path.
    (==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
    (**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1
    (**) RgbPath set to "/usr/share/X11/rgb"
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) Loader magic: 0x81e0a60
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.3
    X.Org Video Driver: 2.0
    X.Org XInput driver : 2.0
    X.Org Server Extension : 0.3
    X.Org Font Renderer : 0.5
    (II) Loader running on linux
    (II) LoadModule: "pcidata"
    (II) Loading /usr/lib/xorg/modules//libpcidata.so
    (II) Module pcidata: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.0.0
    ABI class: X.Org Video Driver, version 2.0
    (--) using VT number 3
    (II) PCI: PCI scan (all values are in hex)
    (II) PCI: 00:00:0: chip 1002,5950 card 103c,2a24 rev 10 class 06,00,00 hdr 00
    (II) PCI: 00:02:0: chip 1002,5a34 card 0000,0000 rev 00 class 06,04,00 hdr 01
    (II) PCI: 00:12:0: chip 1002,4379 card 103c,2a24 rev 00 class 01,01,8f hdr 00
    (II) PCI: 00:13:0: chip 1002,4374 card 103c,2a24 rev 00 class 0c,03,10 hdr 80
    (II) PCI: 00:13:1: chip 1002,4375 card 103c,2a24 rev 00 class 0c,03,10 hdr 00
    (II) PCI: 00:13:2: chip 1002,4373 card 103c,2a24 rev 00 class 0c,03,20 hdr 00
    (II) PCI: 00:14:0: chip 1002,4372 card 103c,2a24 rev 11 class 0c,05,00 hdr 80
    (II) PCI: 00:14:1: chip 1002,4376 card 103c,2a24 rev 00 class 01,01,8a hdr 00
    (II) PCI: 00:14:3: chip 1002,4377 card 103c,2a24 rev 00 class 06,01,00 hdr 80
    (II) PCI: 00:14:4: chip 1002,4371 card 0000,0000 rev 00 class 06,04,01 hdr 81
    (II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
    (II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
    (II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
    (II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
    (II) PCI: 01:00:0: chip 10de,0091 card 10de,02c2 rev a1 class 03,00,00 hdr 00
    (II) PCI: 02:01:0: chip 13f6,0111 card 153b,1144 rev 10 class 04,01,00 hdr 00
    (II) PCI: 02:03:0: chip 10ec,8139 card 103c,2a24 rev 10 class 02,00,00 hdr 00
    (II) PCI: 02:04:0: chip 1106,3044 card 103c,2a24 rev 80 class 0c,00,10 hdr 00
    (II) PCI: End of PCI scan
    (II) Host-to-PCI bridge:
    (II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 0 I/O range:
    [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
    (II) Bus 0 non-prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
    (II) Bus 0 prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
    (II) PCI-to-PCI bridge:
    (II) Bus 1: bridge is at (0:2:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set)
    (II) Bus 1 I/O range:
    [0] -1 0 0x0000e000 - 0x0000efff (0x1000) IX[b]
    (II) Bus 1 non-prefetchable memory range:
    [0] -1 0 0xfa000000 - 0xfcffffff (0x3000000) MX[b]
    (II) Bus 1 prefetchable memory range:
    [0] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
    (II) PCI-to-ISA bridge:
    (II) Bus -1: bridge is at (0:20:3), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
    (II) Subtractive PCI-to-PCI bridge:
    (II) Bus 2: bridge is at (0:20:4), (0,2,2), BCTRL: 0x0002 (VGA_EN is cleared)
    (II) Bus 2 I/O range:
    [0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[b]
    (II) Bus 2 non-prefetchable memory range:
    [0] -1 0 0xfde00000 - 0xfdefffff (0x100000) MX[b]
    (II) Bus 2 prefetchable memory range:
    [0] -1 0 0xfdd00000 - 0xfddfffff (0x100000) MX[b]
    (--) PCI:*(1:0:0) nVidia Corporation G70 [GeForce 7800 GTX] rev 161, Mem @ 0xfa000000/24, 0xd0000000/28, 0xfb000000/24, I/O @ 0xef00/7
    (II) Addressable bus resource ranges are
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
    [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
    (II) OS-reported resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    (II) PCI I/O resource overlap reduced 0x00004100 from 0x0000411f to 0x000040ff
    (II) PCI Memory resource overlap reduced 0xe0000000 from 0xe0000000 to 0xdfffffff
    (II) Active PCI resource ranges:
    [0] -1 0 0xfdefe000 - 0xfdefe7ff (0x800) MX[b]
    [1] -1 0 0xfdeff000 - 0xfdeff0ff (0x100) MX[b]
    [2] -1 0 0xfe02b000 - 0xfe02b3ff (0x400) MX[b]
    [3] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
    [4] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[b]
    [5] -1 0 0xfe02e000 - 0xfe02efff (0x1000) MX[b]
    [6] -1 0 0xfe02f000 - 0xfe02f1ff (0x200) MX[b]
    [7] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
    [8] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[b](B)
    [9] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
    [10] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[b](B)
    [11] -1 0 0x0000dd00 - 0x0000dd7f (0x80) IX[b]
    [12] -1 0 0x0000de00 - 0x0000deff (0x100) IX[b]
    [13] -1 0 0x0000df00 - 0x0000dfff (0x100) IX[b]
    [14] -1 0 0x0000f800 - 0x0000f80f (0x10) IX[b]
    [15] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [16] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [17] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [18] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [19] -1 0 0x00000500 - 0x0000050f (0x10) IX[b]
    [20] -1 0 0x0000fa00 - 0x0000fa0f (0x10) IX[b]
    [21] -1 0 0x0000fb00 - 0x0000fb03 (0x4) IX[b]
    [22] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
    [23] -1 0 0x0000fd00 - 0x0000fd03 (0x4) IX[b]
    [24] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[b]
    [25] -1 0 0x0000ef00 - 0x0000ef7f (0x80) IX[b](B)
    (II) Inactive PCI resource ranges:
    [0] -1 0 0x00004100 - 0x000040ff (0x0) IX[b]O
    (II) Active PCI resource ranges after removing overlaps:
    [0] -1 0 0xfdefe000 - 0xfdefe7ff (0x800) MX[b]
    [1] -1 0 0xfdeff000 - 0xfdeff0ff (0x100) MX[b]
    [2] -1 0 0xfe02b000 - 0xfe02b3ff (0x400) MX[b]
    [3] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
    [4] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[b]
    [5] -1 0 0xfe02e000 - 0xfe02efff (0x1000) MX[b]
    [6] -1 0 0xfe02f000 - 0xfe02f1ff (0x200) MX[b]
    [7] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
    [8] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[b](B)
    [9] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
    [10] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[b](B)
    [11] -1 0 0x0000dd00 - 0x0000dd7f (0x80) IX[b]
    [12] -1 0 0x0000de00 - 0x0000deff (0x100) IX[b]
    [13] -1 0 0x0000df00 - 0x0000dfff (0x100) IX[b]
    [14] -1 0 0x0000f800 - 0x0000f80f (0x10) IX[b]
    [15] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [16] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [17] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [18] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [19] -1 0 0x00000500 - 0x0000050f (0x10) IX[b]
    [20] -1 0 0x0000fa00 - 0x0000fa0f (0x10) IX[b]
    [21] -1 0 0x0000fb00 - 0x0000fb03 (0x4) IX[b]
    [22] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
    [23] -1 0 0x0000fd00 - 0x0000fd03 (0x4) IX[b]
    [24] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[b]
    [25] -1 0 0x0000ef00 - 0x0000ef7f (0x80) IX[b](B)
    (II) Inactive PCI resource ranges after removing overlaps:
    [0] -1 0 0x00004100 - 0x000040ff (0x0) IX[b]O
    (II) OS-reported resource ranges after removing overlaps with PCI:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    (II) All system resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xfdefe000 - 0xfdefe7ff (0x800) MX[b]
    [5] -1 0 0xfdeff000 - 0xfdeff0ff (0x100) MX[b]
    [6] -1 0 0xfe02b000 - 0xfe02b3ff (0x400) MX[b]
    [7] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
    [8] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[b]
    [9] -1 0 0xfe02e000 - 0xfe02efff (0x1000) MX[b]
    [10] -1 0 0xfe02f000 - 0xfe02f1ff (0x200) MX[b]
    [11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
    [12] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[b](B)
    [13] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
    [14] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[b](B)
    [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [17] -1 0 0x0000dd00 - 0x0000dd7f (0x80) IX[b]
    [18] -1 0 0x0000de00 - 0x0000deff (0x100) IX[b]
    [19] -1 0 0x0000df00 - 0x0000dfff (0x100) IX[b]
    [20] -1 0 0x0000f800 - 0x0000f80f (0x10) IX[b]
    [21] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [25] -1 0 0x00000500 - 0x0000050f (0x10) IX[b]
    [26] -1 0 0x0000fa00 - 0x0000fa0f (0x10) IX[b]
    [27] -1 0 0x0000fb00 - 0x0000fb03 (0x4) IX[b]
    [28] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
    [29] -1 0 0x0000fd00 - 0x0000fd03 (0x4) IX[b]
    [30] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[b]
    [31] -1 0 0x0000ef00 - 0x0000ef7f (0x80) IX[b](B)
    [32] -1 0 0x00004100 - 0x000040ff (0x0) IX[b]O
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded by default.
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Server Extension
    (II) NVIDIA GLX Module 173.14.09 Thu Jun 5 00:07:40 PDT 2008
    (II) Loading extension GLX
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "xtrap"
    (II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
    (II) Module xtrap: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension DEC-XTRAP
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension RECORD
    (II) LoadModule: "freetype"
    (II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 1.4.2, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.5
    (II) Loading font FreeType
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "nvidia"
    (II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
    (II) Module nvidia: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Video Driver
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.3.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.0
    (II) LoadModule: "kbd"
    (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.3.1
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.0
    (II) NVIDIA dlloader X Driver 173.14.09 Wed Jun 4 23:47:25 PDT 2008
    (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    (II) Primary Device is: PCI 01:00:0
    (--) Assigning device section with no busID to primary device
    (--) Chipset NVIDIA GPU found
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.3
    (II) Loading sub module "wfb"
    (II) LoadModule: "wfb"
    (II) Loading /usr/lib/xorg/modules//libwfb.so
    (II) Module wfb: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.3
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xfdefe000 - 0xfdefe7ff (0x800) MX[b]
    [5] -1 0 0xfdeff000 - 0xfdeff0ff (0x100) MX[b]
    [6] -1 0 0xfe02b000 - 0xfe02b3ff (0x400) MX[b]
    [7] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
    [8] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[b]
    [9] -1 0 0xfe02e000 - 0xfe02efff (0x1000) MX[b]
    [10] -1 0 0xfe02f000 - 0xfe02f1ff (0x200) MX[b]
    [11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
    [12] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[b](B)
    [13] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
    [14] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[b](B)
    [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [17] -1 0 0x0000dd00 - 0x0000dd7f (0x80) IX[b]
    [18] -1 0 0x0000de00 - 0x0000deff (0x100) IX[b]
    [19] -1 0 0x0000df00 - 0x0000dfff (0x100) IX[b]
    [20] -1 0 0x0000f800 - 0x0000f80f (0x10) IX[b]
    [21] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [25] -1 0 0x00000500 - 0x0000050f (0x10) IX[b]
    [26] -1 0 0x0000fa00 - 0x0000fa0f (0x10) IX[b]
    [27] -1 0 0x0000fb00 - 0x0000fb03 (0x4) IX[b]
    [28] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
    [29] -1 0 0x0000fd00 - 0x0000fd03 (0x4) IX[b]
    [30] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[b]
    [31] -1 0 0x0000ef00 - 0x0000ef7f (0x80) IX[b](B)
    [32] -1 0 0x00004100 - 0x000040ff (0x0) IX[b]O
    (II) resource ranges after probing:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xfdefe000 - 0xfdefe7ff (0x800) MX[b]
    [5] -1 0 0xfdeff000 - 0xfdeff0ff (0x100) MX[b]
    [6] -1 0 0xfe02b000 - 0xfe02b3ff (0x400) MX[b]
    [7] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
    [8] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[b]
    [9] -1 0 0xfe02e000 - 0xfe02efff (0x1000) MX[b]
    [10] -1 0 0xfe02f000 - 0xfe02f1ff (0x200) MX[b]
    [11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
    [12] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[b](B)
    [13] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
    [14] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[b](B)
    [15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [19] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [20] -1 0 0x0000dd00 - 0x0000dd7f (0x80) IX[b]
    [21] -1 0 0x0000de00 - 0x0000deff (0x100) IX[b]
    [22] -1 0 0x0000df00 - 0x0000dfff (0x100) IX[b]
    [23] -1 0 0x0000f800 - 0x0000f80f (0x10) IX[b]
    [24] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [25] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [26] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [27] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [28] -1 0 0x00000500 - 0x0000050f (0x10) IX[b]
    [29] -1 0 0x0000fa00 - 0x0000fa0f (0x10) IX[b]
    [30] -1 0 0x0000fb00 - 0x0000fb03 (0x4) IX[b]
    [31] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
    [32] -1 0 0x0000fd00 - 0x0000fd03 (0x4) IX[b]
    [33] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[b]
    [34] -1 0 0x0000ef00 - 0x0000ef7f (0x80) IX[b](B)
    [35] -1 0 0x00004100 - 0x000040ff (0x0) IX[b]O
    [36] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [37] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Setting vga for screen 0.
    (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    (==) NVIDIA(0): RGB weight 888
    (==) NVIDIA(0): Default visual is TrueColor
    (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    (**) NVIDIA(0): Option "NoLogo" "true"
    (**) NVIDIA(0): Option "TwinView" "1"
    (**) NVIDIA(0): Option "TwinViewOrientation" "Clone"
    (**) NVIDIA(0): Option "MetaModes" "DFP-0: 1920x1200 +0+0, DFP-1: 1920x1080_72 +0+0"
    (**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "DFP-0"
    (**) NVIDIA(0): Enabling RENDER acceleration
    (**) NVIDIA(0): TwinView enabled
    (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
    (II) NVIDIA(0): enabled.
    (II) NVIDIA(0): NVIDIA GPU GeForce 7800 GTX (G70) at PCI:1:0:0 (GPU-0)
    (--) NVIDIA(0): Memory: 262144 kBytes
    (--) NVIDIA(0): VideoBIOS: 05.70.02.11.20
    (II) NVIDIA(0): Detected PCI Express Link width: 16X
    (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    (--) NVIDIA(0): Connected display device(s) on GeForce 7800 GTX at PCI:1:0:0:
    (--) NVIDIA(0): BenQ G2400W (DFP-0)
    (--) NVIDIA(0): PIONEER_PDP. (DFP-1)
    (--) NVIDIA(0): BenQ G2400W (DFP-0): 310.0 MHz maximum pixel clock
    (--) NVIDIA(0): BenQ G2400W (DFP-0): Internal Dual Link TMDS
    (--) NVIDIA(0): PIONEER_PDP. (DFP-1): 155.0 MHz maximum pixel clock
    (--) NVIDIA(0): PIONEER_PDP. (DFP-1): Internal Single Link TMDS
    (II) NVIDIA(0): Display Devices found referenced in MetaMode: DFP-0, DFP-1
    (II) NVIDIA(0): Assigned Display Devices: DFP-0, DFP-1
    (II) NVIDIA(0): Validated modes:
    (II) NVIDIA(0): "DFP-0:1920x1200+0+0,DFP-1:1920x1080_72+0+0"
    (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1200
    (--) NVIDIA(0): DPI set to (93, 95); computed from "UseEdidDpi" X config
    (--) NVIDIA(0): option
    (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xfdefe000 - 0xfdefe7ff (0x800) MX[b]
    [5] -1 0 0xfdeff000 - 0xfdeff0ff (0x100) MX[b]
    [6] -1 0 0xfe02b000 - 0xfe02b3ff (0x400) MX[b]
    [7] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
    [8] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[b]
    [9] -1 0 0xfe02e000 - 0xfe02efff (0x1000) MX[b]
    [10] -1 0 0xfe02f000 - 0xfe02f1ff (0x200) MX[b]
    [11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
    [12] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[b](B)
    [13] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
    [14] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[b](B)
    [15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [19] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [20] -1 0 0x0000dd00 - 0x0000dd7f (0x80) IX[b]
    [21] -1 0 0x0000de00 - 0x0000deff (0x100) IX[b]
    [22] -1 0 0x0000df00 - 0x0000dfff (0x100) IX[b]
    [23] -1 0 0x0000f800 - 0x0000f80f (0x10) IX[b]
    [24] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [25] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [26] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [27] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [28] -1 0 0x00000500 - 0x0000050f (0x10) IX[b]
    [29] -1 0 0x0000fa00 - 0x0000fa0f (0x10) IX[b]
    [30] -1 0 0x0000fb00 - 0x0000fb03 (0x4) IX[b]
    [31] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
    [32] -1 0 0x0000fd00 - 0x0000fd03 (0x4) IX[b]
    [33] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[b]
    [34] -1 0 0x0000ef00 - 0x0000ef7f (0x80) IX[b](B)
    [35] -1 0 0x00004100 - 0x000040ff (0x0) IX[b]O
    [36] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [37] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) NVIDIA(0): Initialized GPU GART.
    (II) NVIDIA(0): Unable to connect to the ACPI daemon; the ACPI daemon may not
    (II) NVIDIA(0): be running or the "AcpidSocketPath" X configuration option
    (II) NVIDIA(0): may not be set correctly. When the ACPI daemon is
    (II) NVIDIA(0): available, the NVIDIA X driver can use it to receive ACPI
    (II) NVIDIA(0): events. For details, please see the "ConnectToAcpid" and
    (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    (II) NVIDIA(0): Config Options in the README.
    (II) NVIDIA(0): Setting mode "DFP-0:1920x1200+0+0,DFP-1:1920x1080_72+0+0"
    (II) Loading extension NV-GLX
    (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
    (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
    (==) NVIDIA(0): Backing store disabled
    (==) NVIDIA(0): Silken mouse enabled
    (II) Loading extension NV-CONTROL
    (==) RandR enabled
    (II) Setting vga for screen 0.
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-APPGROUP
    (II) Initializing built-in extension XAccessControlExtension
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension XFree86-Bigfont
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing built-in extension XEVIE
    (II) Initializing extension GLX
    (**) Option "Protocol" "auto"
    (**) Mouse0: Device: "/dev/input/mice"
    (**) Mouse0: Protocol: "auto"
    (**) Option "CorePointer"
    (**) Mouse0: always reports core events
    (**) Option "Device" "/dev/input/mice"
    (**) Option "Emulate3Buttons" "yes"
    (**) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
    (**) Option "ZAxisMapping" "4 5 6 7"
    (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
    (**) Mouse0: Buttons: 11
    (**) Mouse0: Sensitivity: 1
    (**) Option "CoreKeyboard"
    (**) Keyboard0: always reports core events
    (**) Option "Protocol" "standard"
    (**) Keyboard0: Protocol: standard
    (**) Option "AutoRepeat" "500 30"
    (**) Option "XkbRules" "xorg"
    (**) Keyboard0: XkbRules: "xorg"
    (**) Option "XkbModel" "trustda"
    (**) Keyboard0: XkbModel: "trustda"
    (**) Option "XkbLayout" "no"
    (**) Keyboard0: XkbLayout: "no"
    (**) Option "CustomKeycodes" "off"
    (**) Keyboard0: CustomKeycodes disabled
    (II) evaluating device (Keyboard0)
    (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
    (II) evaluating device (Mouse0)
    (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
    (--) Mouse0: PnP-detected protocol: "ExplorerPS/2"
    (II) Mouse0: ps2EnableDataReporting: succeeded
    Could not init font path element /usr/share/fonts/Type1, removing from list!
    My xorg.conf looks like this now (I don't know what values to use for HorizSync and VertFresh on my TV, the ones that are in there I just made up ):
    # nvidia-settings: X configuration file generated by nvidia-settings
    # nvidia-settings: version 1.0 (buildmeister@builder63) Mon May 19 00:34:28 PDT 2008
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    RgbPath "/usr/share/X11/rgb"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    Load "glx"
    Load "dbe"
    Load "xtrap"
    Load "extmod"
    Load "record"
    Load "freetype"
    EndSection
    Section "ServerFlags"
    Option "Xinerama" "0"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    Option "XkbRules" "xorg"
    Option "XkbModel" "trustda"
    Option "XkbLayout" "no"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    Option "Emulate3Buttons" "yes"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "BenQ G2400W"
    HorizSync 31.0 - 94.0
    VertRefresh 50.0 - 85.0
    EndSection
    Section "Monitor"
    Identifier "Monitor1"
    VendorName "Unknown"
    ModelName "PIONEER_PDP."
    # HorizSync 15.0 - 80.0
    # VertRefresh 23.0 - 60.0
    EndSection
    Section "Device"
    Identifier "Card0"
    Driver "nvidia"
    VendorName "nVidia Corporation"
    BoardName "G70 [GeForce 7800 GTX]"
    BusID "PCI:1:0:0"
    EndSection
    Section "Device"
    Identifier "Videocard0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce 7800 GTX"
    EndSection
    Section "Device"
    Identifier "Videocard1"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce 7800 GTX"
    BusID "PCI:1:0:0"
    Screen 1
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Videocard0"
    Monitor "Monitor0"
    DefaultDepth 24
    Option "NoLogo" "true"
    Option "TwinViewOrientation" "Clone"
    Option "TwinView" "1"
    Option "TwinViewXineramaInfoOrder" "DFP-0"
    Option "metamodes" "DFP-0: 1920x1200 +0+0, DFP-1: 1920x1080_72 +0+0"
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    I read somewhere that the TV is supposed to be able to show 1080p in 72Hz. But when I try that it goes blank. Maybe it has something to do with the monitor being 1920x1200 and the TV 1920x1080. The monitor won't accept 1920x1080 as resolution so I guess that can only be done in Windows...

  • How to set screen refresh rate for linux console (runlevel 3)?

    Hi,
    I have a CRT monitor, so the refresh rate is always needed to configure. I use 720x400 resolution in console, but the refresh rate is 70hz. Are there any ways to get it higher in console (with KMS or without)?
    Last edited by AleXoundOS (2009-11-04 12:27:09)

    thank you for replies
    But setting the resolution, e.g. vga=773, would not change the refresh rate, or would it?
    It would, but usually not to the maximum provided by the monitor. May be it is real to find the place, where it looks for available resolutions linked with refresh rates...
    According to the Gentoo page I can use uvesafb for setting refresh rate as well as other settings. And then I found uvesafb page in ArchWiki. But the way to set proper refresh rate is not so easy as I expected, because I need to install uvesafb and it needs additional daemon. And also I think KMS can't work here. However it's better than nothing, if I don't find any other way, I will try this one.

  • IPad Air display refresh rate for full screen movies?

    What exactly happens if I play a movie on the iPad full screen with a rate of e.g. 24p, 25p or 50i?
    The stated maximal refresh rate is 60Hz.
    Will this rate be reduced when playing movies?
    Or will frames be dropped / interpolated if the frame rate and the refresh rate don't match?
    Or will the movie be sped up / slowed down?
    When using the HDMI adapter, I can see that it always outputs 60p, regardless of the movie frame rate. But maybe this is different on the internal panel.
    Thanks for any insight!

    Should it happen again double tap the screen with three fingers. Then go to settings> general> accessibility> zoom> off.

  • Refresh rate for client tracking i WCS/MSE

    Hi
    I have a customer that have trouble with the update of the position of a client. Even if the clients walks across the whole building, the client will stay at the same place for several minutes. Is there any way to tune the refresh rate? When I push the load button in the map, the clients position will refresh, or it did when I was on the site, now they just test with an application.
    The setup:
    WiSM 7.0.220
    WCS 7.0.220
    MSE 7.0.220
    They use the API for MSE to get the location information to the external application, and that will show the information on a cisco 7925 IP phone.
    Do someone know a way to increasing the refresh rate?
    - Patrick

    From: Cisco Mobility Services Engine - Context Aware Mobility Solution Deployment Guide
    Jitter: Before the 5.2 release, MSE used to have Location Smoothening mechanism to track clients. Moving average was taken for clients, or, in other words, client movement was averaged. Starting with 5.2 software release, this whole
    mechanism has been replaced with “Location Filters.” Location Filtering is applied internally on a per client basis. MSE
    keeps track of which client moves and which is stationary, and it applies filtering accordingly. This reduces the overall jitter of the system. Location filtering is enabled by default.
    Perhaps you want to turn  location Filtering OFF for your application.

  • Refresh rate for a new LED TV...

    Hey guys,
    It's been a few years, and it's time to upgrade my TV. 
    A few questions on the refresh rate.  Aside from watching movies, I like to play games (on PS4, when I can buy it), and watching primarily sports.  
    So, in essence, I'm assuming I'd be one who would notice a higher refresh rate?  Is there a noticeable difference from 60hz, to 120hz, to 240hz?
    Thanks!

    Some thoughts...
    how much is calibration?  how much is that TV?
    some say TV's should be calibrated again after 6 months of usage where the TV has had some break-in.  How much is that second calibration???
    some say they just run on theatre or cinema mode to save costs
    some say they don't like the calibration and flip back to the normal, bright or vivid mode.  Personally I hate to see the highlights punched out and looseing detail for the brightness
    some purchase Spyder or XRite calibration tools
    some will use Apps to do their own calibration (note you need a cable or a wireless box), however you don't want someone who is colorblind making those calibration decisions (like me)
    https://itunes.apple.com/ca/app/thx-tune-up/id5926​24594?mt=8
    http://www.pcmag.com/article2/0,2817,2414804,00.as​p
    http://www.youtube.com/watch?v=rOoizmYBHlo&hd=1
    When shopping for a TV I visited several retailers.  For the stores who calibrated their displays.... I had a tough time deciding which one to get because they were ALL good.  I could not tell which one was LCD, LED, or Plasma.  Yes calibration is worth it, but how much do you want to spend?

  • Refresh rate for scroll area in html widget (iBooks Author)

    So, I am finding that within the html widget, the refresh rate of a scrolling area is lagging.
    As someone scrolls, the scroll window is black before the content catches up and is viewable.
    Any recommendations to fix this problem?

    This is stripped down test code:
    <!DOCTYPE HTML>
    <html>
    <head>
    <meta name="viewport" content="width=1024px" />
    <title>Test Scrolling Area</title>
    <style type="text/css">
              body { overflow: hidden; background: #000; margin: 0px;}
              #section { position: absolute; }
              .bkgrd { position: absolute; }
              .list {    width: 348px;    height: 471px;    position: absolute;    top: 108px;    left: 8px; overflow: scroll; -webkit-overflow-scrolling: touch; }
              .fill { width: 348px; height: 471px; overflow-x: hidden; overflow-y: scroll; background: transparent; font-size: 1em; font-family: "Optima" sans-serif; color: white; }
              .fill p.lineup { font-weight: bold; color: #fff; margin: 0;}
              .fill .head { font-weight: bold; color: #d40000;  }
              .fill .normal { font-weight: normal; color: #fff; margin: 0;}
              .fill .head { font-weight: bold; color: #d40000;  }
              .fill .date { color: #d40000;  }
              .fill .city { font-weight: bold; }
      </style>
    </head>
    <body>
    <div id="section">
              <div class="bkgrd">
                        <img src="images/bgrd.jpg" width="1024px" height="auto" />
              </div>
              <div class="list">
                        <div class="fill">
                                  <p><span class="head">June</span><br />
                                            <span class="date">          00          </span>   <span class="city">          City, ST          </span><br />        Really Long Venue Name<br />
                                            <span class="date">          00          </span>   <span class="city">          City, ST          </span>            Venue          <br />
                                            <span class="date">          00          </span>   <span class="city">          City, ST          </span>            Venue          <br />
                                            <span class="date">          00          </span>   <span class="city">          City, ST          </span>            Venue          <br />
                                            <span class="date">          00          </span>   <span class="city">          City, ST          </span>            Venue          <br />
                                            <span class="date">          00          </span>   <span class="city">          City, ST          </span>            Venue          <br />
                                            <span class="date">          00          </span>   <span class="city">          City, ST          </span>            Venue          <br />
                                            <span class="date">          00          </span>   <span class="city">          City, ST          </span>            Venue          <br />
                                            <span class="date">          00          </span>   <span class="city">          City, ST          </span><br />        Really Long Venue Name<br />
                                            <span class="date">          00          </span>   <span class="city">          City, ST          </span><br />        Really Long Venue Name<br />
                                            <span class="date">          00          </span>   <span class="city">          City, ST          </span>            Venue          <br />
                                            <span class="date">          00          </span>   <span class="city">          City, ST          </span>            Venue          <br />
                                            <span class="date">          00          </span>   <span class="city">          City, ST          </span>            Venue          <br />
                                            <span class="date">          00          </span>   <span class="city">          City, ST          </span>            Venue          <br />
                                            <span class="date">          00          </span>   <span class="city">          City, ST          </span>            Venue          <br />
                                            <span class="date">          00          </span>   <span class="city">          City, ST          </span>            Venue          <br />
                                            <span class="date">          00          </span>   <span class="city">          City, ST          </span>            Venue          <br />
                                            <span class="date">          00          </span>   <span class="city">          City, ST          </span><br />        Really Long Venue Name<br />
                                            </p>
                                  <p><span class="head">June</span><br />
                                            <span class="date">          00          </span>   <span class="city">          City, ST          </span><br />        Really Long Venue Name<br />
                                            <span class="date">          00          </span>   <span class="city">          City, ST          </span>            Venue          <br />
                                            <span class="date">          00          </span>   <span class="city">          City, ST          </span>            Venue          <br />
                                            <span class="date">          00          </span>   <span class="city">          City, ST          </span>            Venue          <br />
                                            <span class="date">          00          </span>   <span class="city">          City, ST          </span>            Venue          <br />
                                            <span class="date">          00          </span>   <span class="city">          City, ST          </span>            Venue          <br />
                                            <span class="date">          00          </span>   <span class="city">          City, ST          </span>            Venue          <br />
                                            <span class="date">          00          </span>   <span class="city">          City, ST          </span>            Venue          <br />
                                            <span class="date">          00          </span>   <span class="city">          City, ST          </span><br />        Really Long Venue Name<br />
                                            <span class="date">          00          </span>   <span class="city">          City, ST          </span><br />        Really Long Venue Name<br />
                                            <span class="date">          00          </span>   <span class="city">          City, ST          </span>            Venue          <br />
                                            <span class="date">          00          </span>   <span class="city">          City, ST          </span>            Venue          <br />
                                            <span class="date">          00          </span>   <span class="city">          City, ST          </span>            Venue          <br />
                                            <span class="date">          00          </span>   <span class="city">          City, ST          </span>            Venue          <br />
                                            <span class="date">          00          </span>   <span class="city">          City, ST          </span>            Venue          <br />
                                            <span class="date">          00          </span>   <span class="city">          City, ST          </span>            Venue          <br />
                                            <span class="date">          00          </span>   <span class="city">          City, ST          </span>            Venue          <br />
                                            <span class="date">          00          </span>   <span class="city">          City, ST          </span><br />        Really Long Venue Name<br />
                                            </p>
                                  <br />
                        </div>
              </div>
    </div> <!-- end section -->
    </body>
    </html>

  • Refresh rate for Numeric Indicator

    I have application that displays 60 16 bit word of data in Hex format on the screen simulatanousely as I receive block of data at at approximately 10,000 times a second through USB. Obviously, at this 10,000Hz rate, it is an over-kill in terms of the human eye visually processing at that rate. Does anyone know what is the screen update rate for numberic indators and is there a way of controlling it. I was trying to see if I could set it for 10Hz.
    Thanks.
    Paul  

    Let me clarify my question:
    I have a project which could send data to the screen at a rapid rate (think oscope).  I do not want this to slow down the program more than necessary.  The data will be grabbed in a loop and displayed to the screen (and possibly enqueued for extra processing). 
    It is my understanding that if I simply wire it to an indicator (yes I suppose this was a typo) or local variable it will be handled nicely, i.e. sent to an update buffer to handle screen updates at an appropriate rate.
    However I would like to encapsulate my GUI (either using an action engine with USRs or a class) and so was planning on having references to all my controls and indicators within this encapsulation.
    So again, my question is this: Is there a way to write to an indicator (or control) via the reference while still having the advantages (speed/display buffer) of a local variable?
    Secondary question:
    Where is the best place to find information on all the various efficiencies LabVIEW has built in.  For example, in my last project I was actually writing my data to a separate queue which was dequeued in a loop with a built in delay and only the most recent item was written to the screen and the rest deleted.  In other words, I had no idea LabVIEW already handled this in the background and I would like to know what else LabVIEW already takes care of for me.
    Thanks.

  • Refresh rate for logicaldisk - free megabytes (performancecounter)

    The time interval for the PerformanceCounter("LogicalDisk", "Free Megabytes") counter appears to be 300 seconds.
    Calling .NextValue() repeatedly within this five minute interval will yield the same result as you are seeing. 
    Is this a bugs or behavior ?
    If is a behavior, what is the reason behind for logicalDisk - Free Megabytes has 5 minutes interval update however the other counters are 1 seconds interval ?

    Hello MaleCoder,
    Yes, I reproduced this scenario as you mentions, the logicalDisk - Free Megabytes has 5 minutes interval update, however, since there is not a specific document for the CategoryName property, it is not clear why it performs a 300s interval update. My suggestion
    is that you could post this feedback to the team:
    https://connect.microsoft.com/VisualStudio
    If your goal is to monitor the disk usage, you could have a try with the WMI approach:
    System.Management.ManagementScope scope =
    new System.Management.ManagementScope(@"\\remotemachinename\root\cimv2");
    ObjectQuery query =
    new ObjectQuery("SELECT Name, Freespace FROM Win32_LogicalDisk WHERE DriveType=3");
    ManagementObjectSearcher search = new ManagementObjectSearcher(scope, query);
    ManagementObjectCollection results = search.Get();
    foreach (ManagementObject mo in results)
    Console.WriteLine("Drive: {0} -- Free Space: {1}", mo["Name"], mo["FreeSpace"]);
    Regards.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Maximum resolution/refresh rate the 5,6 model powerbooks can support? (15")

    Hiya, just checking out this program called DisplayConfigX which allows the user to add in modified resolutions that aren't listed automatically for your computer, and 2nd displays.
    before i really f* things over with my monitor, out of curiousity, is 1280x854 @ 60hz really the largest resolution those monitors can handle? (im of course referring to the powerbooks before the recently released models.

    Yes, 1280 x 854 really is the highest you can go. You are right to be cautious trying to enter anything higher. I can't recommend trying it.
    Some stand-alone monitors can perform a "downscaling" trick whereby they will fit a higher resolution into their native resolution by scaling down the input. The PowerBook lacks this ability. It can only upscale.

Maybe you are looking for