Suggested Support Pack Level for ECC 6.0 Upgrade - Target

Hi ,
Can someone give us the suggested support pack level for the ECC 6.0 system after the upgrade.
Our current patch level is:
SAP_ABA     700     0012     SAPKA70012
SAP_BASIS     700     0012     SAPKB70012
PI_BASIS     2005_1_700     0012     SAPKIPYJ7C
ST-PI     2005_1_700     0003     SAPKITLQI3
SAP_BW     700     0014     SAPKW70014
SAP_AP     700     0009     SAPKNA7009
SAP_APPL     600     0010     SAPKH60010
SAP_HR     600     0013     SAPKE60013
EA-IPPE     400     0008     SAPKGPID08
EA-APPL     600     0008     SAPKGPAD08
EA-DFPS     600     0008     SAPKGPDD08
EA-FINSERV     600     0008     SAPKGPFD08
EA-GLTRADE     600     0008     SAPKGPGD08
EA-HR     600     0013     SAPKGPHD13
EA-PS     600     0008     SAPKGPPD08
EA-RETAIL     600     0008     SAPKGPRD08
FINBASIS     600     0008     SAPK-60008INFINBASIS
ECC-DIMP     600     0008     SAPK-60008INECCDIMP
ERECRUIT     600     0008     SAPK-60008INERECRUIT
FI-CA     600     0008     SAPK-60008INFICA
FI-CAX     600     0008     SAPK-60008INFICAX
INSURANCE     600     0008     SAPK-60008ININSURANC
IS-CWM     600     0008     SAPK-60008INISCWM
IS-H     600     0008     SAPK-60008INISH
IS-M     600     0008     SAPK-60008INISM
SEM-BW     600     0008     SAPKGS6008
IS-OIL     600     0008     SAPK-60008INISOIL
IS-PS-CA     600     0008     SAPK-60008INISPSCA
IS-UT     600     0008     SAPK-60008INISUT
LSOFE     600     0008     SAPK-60008INLSOFE
IRMIPM     30B     0005     SAPK-30BI7INIRM
IRMGLB     30B     0005     SAPK-30BG7INIRM
ST-A/PI     01K_ECC600     0000     -
GSCDMC     600     0001     SAPK-60001INGSCDMC
RCMGT     601     0001     SAPK-60101INRCMGT
Thanks
Senthil

Hi Senthil,
of course it is always recommended to use the newest Support Package Stack,
but if your system (your business processes) are working fine, I would recommend you to
import support package only then when you have an error or you want to have a special fiunctionality.
Some customers play support packages into the system only twice a year, because the business processes
should be tested after the sp import.
Kind regards
Imre Takácsi-Nagy
Senior Support Consultant II.
SAP Global Support Center Austria
Netweaver WEB Application Server ABAP / JAVA

Similar Messages

Support Pack level for upgrade

Hi All,
We are upgrading from R/3 4.7 to ECC 6.0, can anybody provide me Support Pack level for SAP_ABA, SAP_BASIS etc. before starting upgrade.
I have gone through lot of OSS notes but not getting exact SP level.
Regards,
Sachin

I depends on
- what upgrade package you use (SR1, SR2, SR3)
- the SP level of the source system
The upgrade guide tells you the minimum SP level needed to do the upgrade.
If you use the new CD/DVD set, the system will be upgraded to SP 12 (BASIS, ABA, SAP_APPL).
If you backup your wage tables before the upgrade (as described in the installation guide) you can also go to the highes SP level for SAP_HR.
Markus

SAP R/3 4.6 B Support pack level for AIX 5.2

Hi,
We have upgraded O.S version from AIX 4.3 to AIX 5.2. Here our environment is SAP R/3 4.6B and DB oracle 8.1.7.
My question: Do we apply any support pack to the system after support pack upgrade. Please find the below support pack level for our current system.
SAP_BASIS      46B           0054    SAPKB46B54
SAP_ABA         46B           0054    SAPKA46B54
SAP_APPL       46B           0054    SAPKH46B54
SAP_HR           46B           0000        -
ST-PI            2005_1_46B    0003    SAPKITLQC3
Please request the feedback.
Thanks & Regards,
Narayana Murthy.

Do we apply any support pack to the system after O.S upgrade ?
( Correction for the below posted mail)

Support Pack level for R/3 4.7 and BW 3.5 with SAP CRM2007

What should be the Support Pack level for R/3 4.7 and BW 3.5 with SAP CRM2007?
Regards,
Rajesh Banka

>
Rajesh Banka wrote:
> What should be the Support Pack level for R/3 4.7 and BW 3.5 with SAP CRM2007?
>
> Regards,
> Rajesh Banka
Hi Rajesh,
Please see the note '833438', it explains which pack is required in this scenario.
"You cannont connect ERP (R/3) releases lower than 4.6C to CRM 5.0.
All subsequent CRM releases (5.0 or higher) cannot be connected to ERP lower
than (R/3) 4.6C.
These types of system landscapes are not supported by SAP.
If you are using CRM 5.0, you must have implemented Plug-in PI 2004.1
Support Package 10 and, provided you have Basis Release 620 or higher, you
must import PI_BASIS 2005.1 in R/3. --> After you have imported these
plug-ins"
Thanks,
Nitin Sharma

How to check for the prerequisite Support pack level

We are planning to upgrade from 4.7 to ECC6..How can check ,what is minimum support pack level that needs to be maintained in 4.7 for the upgrdade to ECC6.
Can i check this in Servrice markrt place .if so please let me know where to check
Thanks

Hello,
I am sure you will find relevant information in the link below.
https://websmp207.sap-ag.de/upgrade
Regards,
Manoj Chintawar

Basis Support package level of ECC 6.0

Dear All,
I use SAP Version ECC 6.0 (700 Kernel, 64bit) Database SQL.
My question is what should be the support package level of ECC 6.0? SAP recommends for the latest support package level always. But, whether the latest support package level will be stable?
We are in the blue print stage now, I haven't received any requirement from the fuctionals for the support package upgrade.
We have modules like, SD, MM, FI, FICO, HR, PS and CS.
Anyone worked with these modules who can provide me, the particular components related to these modules with the stable support pack level.
Thanks in Advance,
Abu Sandeep

Hi,
Yes, for a new installation always go for the last support packages.
After going live, NEVER, NEVER apply support packages without qualifying them for YOUR company in a test system. It takes a lot of time to do non regression tests but it is mandatory IMHO.
Regards,
Olivier

Support Pack Level Upgrade in BI 7.0

Hi all,
Can anyone let me know what are the possible issues that would occur after upgrading support pack level in BI 7.0.
As far as I know a BI consultant would participate in the upgrade activities like BI objects check, SPAU, query check, etc. Can anyone let me know if there are are any other activities to be performed.
I would appreciate your help.
Thanks,
Sunny.

Hi
There is any customer specific development done by SAP in the previous system. If so, the time to act is just after the pre upgrade study only. The customer would only want to retain the customer specific module developed by SAP. We need to get SAPu2019s intervention in the project before we start the upgrade. SAP would develop certain patches to be run on the previous system to capture all the customer specific development and then they would run some patches on ECC system u2013 this would release the customer specific development in the new system (ECC./BI). This is a very crucial and important check of the step. If not taken care of at the proper time, it might hamper the Customer Specific development on the new system.
It is to be assured that the new system is at the latest stack level for ABAP, XI, BI etc before we start the SPDD and SPAU phase
Only one request is to be made for SPDD. For SPAU too, only one request should be made.
Previous system sandbox should be available for reference during the entire upgrade project and should not be scrapped before the Go Live.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0c9c8be-346f-2a10-2081-cd99177c1fb9
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/304b9de6-f84f-2b10-94af-e5ff7461c18c
http://www.thespot4sap.com/upgrade_guide_v2.pdf
Hope it helps.

Security Guide for Enhancement Pack 4 for ECC 6.0

Hello,
I am trying to analyse the impact of applying Enhancement pack 4 for ECC 6.0, Can someone help me find any security guides for it.
It is an existing system and few additional modules are being implemented.
Kind Regards.

Hello,
We have applied EHP4 on an exisiting(running) ECC 6.0 System. Can someone help me find answers to below queries
a) What is the SAP standard process to start with Security bit.
b) Do we need to run SU25 steps. If yes, which one of them.
c) Since the purpose of applying EHP4 was to activate few set of new business functionalities, we intend to affect the existing security design at the minimal. What is the best approach for this.
Kind Regards,
Abdul

Setup SM 4.0 to allow me to approve support packs/stacks for download

I need a doc or a procedure to setup Solution Manager for approving support packs/stacks for download. I havn't had much luck finding a good one.

Have you configured Maintenance Optimizer , if not use the following link to see the documentation for configuring MOPZ
https://websmp105.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000689877&
From the above link click on <b>SAP Tutor on Maintenance Optimizer</b> this will show you how to use Maintenance optimizer and <b>Step by Step Configuration of Maintenance Optimizer SP Stack 09</b> will help you to configure Maintenance Optimizer. ( scroll down to bottom to see the links)
Thanks
Prince Jose

Any Specific Guide for Ecc 5.0 upgrade to ECC 6.0 (linux/oracle)?

Hi Gurus
Is there any specific guide available for the Upgrade of ECC 5.0 to ECC 6.0 from service market place.
for the linux operating system and oracle database. or atleast , I want to know what are the mimimum checks to be done (prerequisities) in the ECC 5.0 system which need to upgrade into ECC6.0.
Thanks in advance
Balaji

Hi,
There is not an specific guide for ECC 5.0 upgrade, just the guides specific for your OS/DB combination, they can be downloaded in https://websmp204.sap-ag.de/instguides but you should use the Unix/Oracle document,

Support pack level issue in Standard Finance Program.

Hi Everyone,
                i have an issue which is related to Finance. Actually, Finance People are Using a Standard Report (FS10N) - GL Account Line item display. There,Vendor and Customer Details are not displayed (Customer/Vedor Filed is empty) for the normal GL Account. But for the Reconsalation GL accounts they are able to see.
               For this issue SAP released an SNOTE 1107639 and correction delivered in SAP_APPL support pack 12.And we already applied it in the system and our current SAP_APPL level is 14. Though it is already available why the problem is still persist. Another thing is, for the same issue there is another SNOTE 1034354 which guides to enhancement thro' some BADI work in standard program.
              My question is that if the correction is available in a patch and that is imported as well in to system without any error then it should resolving the problem.but in this case why it does not work out or what could be the reason behind this. As a Basis admin i would like to know.
Thanks&Regards,
Siva

Hi Siva,
Your query is obsolutely acceptable...
After supportpack update some times database will not be synchronised with the new updates.
and more over it seems there is a complete issue with SAP side.... there is only one option in u r hand now just restart the system.but please make sure to take the down time...and check whether the correction is working or not..if not then no luck u need to contact SAP global team and ask them why the corrections are not working properly..
Regards,
Srini

Upgrade to CRM 2007: minumun service pack level for other components

Hi all,
I have to upgrade my CRM 5.0 to CRM 2007. CRM is connected to ECC 6.0 and SCM 5.0. What are the minimum SP level for those component? Is there any link to documentations about mandatory SP for not CRM components?
Thanks a lot.

Hello
In the CRM 2007 Master Guide which is available in the [SAP Service Marketplace|http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000704565&] I found that SAP ERP 6.0 EHP 3 is recomended and SAP R/3 4.6C SP 53 is the minimum version. No special version is mentioned for SCM 5.0.
Best regards
Gregor

Is Solution Manager required for ECC 6.0 upgrade?

We will upgrade our system from 4.7 to ECC 6.0. Is Solution Manager a required tool in ECC 6.0? My understanding is Solution Manager has to be run on a different server, ie. we will have to buy a new server. We have a small SAP implementation with only FI & CO modules, so we are trying to cut our costs if we could. Can anybody share their experience? Thanks for any input.

In an Upgrade , Solution Manager is required for Upgrade Keys and downloading the support packs . Now a days to download the support packs you have to approve it in Solution Manager otherwise it won't show up in your download basket.
May be SAP can provide you the keys & approve the SPs ( they used to do that before ) , in that case it isn't required.
You can also manage your upgrade project in Solman . Sooner or later you need to install solution manager. it's a nice system.Many good features like central monitoring, early watch alert etc etc ...
Thanks
Prince Jose

Hardware requariment for ECC 6.0 upgrade from ECC 5.0

Hello
I am on ECC 5.0 with oracle 9.2.0.7.I need to upgrade this to ECC 6.0.
I have already implemented MM,PP,FICO,QM and HCM.My current data base size is 900GB.This has 30GB monthly growth.
With this ECC 6.0 upgrade i am planing to implement PM,EP.
I know converting none Unicode system to unicode system is required some more hardware resources than the none Unicode.
Some document says 40-60% more disk space and 35% more processing speed from current system.
Can any one give me the correct information about the hardware requirement for ECC 5.0 to ECC 6.0 upgrade.
Thanks
Roshantha

Check with the Links
https://websmp102.sap-ag.de/sizing
https://websmp208.sap-ag.de/quicksizer
http://www.4soi.de/
http://www.easymarketplace.de/
Kanagaraja L

Is it a must to use Solution manager for ECC 6.0 upgrade

Is it a must to use Solution Manager for ECC 6.0 (FICO & HR) upgrade? I am told Solution Manager is required only if it has ABAP and JAVA stacks, or involves Enhancement Packages; and could be optional if it is only ECC 6.0 with ABAP stacks.

Hi,
I'm having a difficult time finding some guidance for setting up our R/3 Enterprise system in solman properly, so that I can create the upgrade XML file required to go directly to ERP 6.0 EHP4.
I've set up the R/3 system fine, but when i create a maintenance transaction i cannot for the life of me figure out how to tell it I want to go from r/3 to ERP6 ehp4.
Any docs out there for this?
Thanks!
I figured it out... i had to add the R/3 Enterprise logical components to my system landscape. After that I was able to select R/3 as the initial data in the maintenance transaction and then the system i wanted to upgrade, and then the option to upgrade.
Never mind!
Edited by: Tom Janes on Sep 9, 2009 12:52 AM

Suggested Support Pack Level for ECC 6.0 Upgrade - Target

Similar Messages

Maybe you are looking for