Suggestion: Add ability to attach a note to a specific webpage

Does anybody else have a use for my idea?
TIME TO MOVE THE STICKIES BACK TO THE DESKTOP.
How about adding the ability to attach a STICKIE to any webpage in Safari, DVD project in iDVD, album in iPhoto or iTunes, folder in Finder, email address or subject in Mail, data devices on the desktop, everything? Just as I use stickies to write temporary notes that are task specific and then stick it ON THE TASK itself. The STICKIE would pop up every time it's corresponding record, page, device was selected as the top window and disappear as soon as the window is deselected. Lastly, create a STICKIE icon on the lower left of every Finder window that would open the STICKIE folder where every STICKIE file resides. In the STICKIE folder all STICKIES would be shown in either name or icon format like any other Finder window.
This feels like a natural extension of the new Spaces feautre coming up in Leopard to me.
Spotlight could have the ability to search for "STICKIE" specific records that contained a user specified word or phrase. For example, a word or phrase that pops into my head and reminds me of that great web page in APPLE TECH SUPPORT that I had forgotten about. With a few clicks I first click the stickie I want in Spotlight and immediately it appears with it's corresponding web page.
Example Problem: Apple Battery Exchange Program website will not accept my iBook's batteries serial # even though it correctly falls in the specified range. After a long call into tech support I was told that due to the overwhelming amount of calls the website is not recongizing all the battery serial numbers. I was informed that I needed to just keep trying until it goes through. If I could in Safari with a right click or cmd key combination immediately make a post-it note and then either type onto the post-it, cut and copy, or using crosshairs highlight a region of the page and copy. I would then have a post-it with just the LIVE fields of 'laptop serial number' and 'battery serial number' of the web
page with **the fields still filled in** as they were when I created the note. I would then click on the 'continue' button on my note and the webpage would advance to the next page and my note would disappear.

Good suggestions. Here is the Apple Feedback page for OS X - best way to make suggestions to Apple.
iMac G5 Rev C 20" 2.5gb RAM 250 gb HD/iBook G4 1.33 ghz 1.5gb RAM 40 gb HD Mac OS X (10.4.7) LaCie 160gb d2 HD Canon i960 printer

Similar Messages

Suggestion: Allow users to attach a note to an open tab for later reference.

I just wanted to make a quick suggestion: I work with about 25 tabs open, and sometimes need to append a quick note so that I remember what I needed to do with the info on the tab. It would be really handy if I were able to type a brief note that was attached to the tab for later reference. Perhaps a window that appears if I right-click on the tab and select "Append Note". A pop up appears where I can type a note, and then disappears when I click "save". I can recall the note by right-clicking on the tab and selecting "Reveal Note". Maybe each tab that has a note could have a colored bar across the top of the tab to indicate there is a note.
Keep up the good work; thank you!
-Cary Snowden

That's an interesting idea.
Currently, the closest thing would be the extensions that allow you to create a "Post-it style" note associated with a web page. It's not specific to the tab, so if you went back and forth in history, the note wouldn't be visible on the other pages. So not as useful in that sense.
Still, one of these might be helpful for the time being until someone can work on something tab-specific. Note: I haven't tried these myself:
* Internote: https://addons.mozilla.org/firefox/addon/internote/
* Sticky Notes: https://addons.mozilla.org/firefox/addon/sticky-notes/

I want to add a photo as an attachment and NOT have it pictured in the body of the email.

I want to add a photo as an attachment and NOT have it pictured in the body of the email.
When I click on the paper clip to attach, it always is pictured in the email.

https://discussions.apple.com/message/16802006#16802006

Suggestion: add a new tag

Hi
Following the email from this morning with the new specs, I'd like to make a suggestion: add a new extension tag to iTunes for alternate rendering of the enclosure, e.g.:
<enclosure url="http://www.declencheur.com/clic/medias/2007/decl-2007-01-08.m4v" length="20491070" type="video/x-m4v"/>
<itunes:alt-enclosure url="http://www.declencheur.com/clic/medias/2007/decl-2007-01-08-hd.m4v" length="40982140" type="video/x-m4v" media="hd"/>
As you say yourself, it's not good to introduce two feeds as it dilutes our presence on iTunes BUT, from a bandwidth standpoint (both for the producer AND for the visitor) it makes sense to differentiate the content based on whether they intend to see on Apple TV (720 would be better) or the iPod.
You could implement it with a very simple preference in iTunes, after all iTunes knows whether I have iPod with video and/or Apple TV but it would result in a much better user experience (faster downloads, higher quality where available).
Please consider this.
--ben

I am well aware of the debate on multiple enclosures but this is not what I'm suggesting.
With multiple enclosures, the client would download all of the enclosures.
I propose alternates, i.e. different encoding of the same document, so that only one of the files is downloaded, the one most suitable for the user hardware. Since this is not provided for by the RSS specs, the proper solution is to implement it in an extension.
--ben

When sending email PO in a PDF attachment, the attachment can not be openen

Hi all,
We are trying to send an email with the PO in PDF format. We got the email but the attachment can not be opened.
Error reads: Adobe could not open test.pdf because it is either not a supported file type or because the file has been damaged (for example , it was send as a email attachemnet and was not correctly decoded).
Could any body bring some light?   We know that everything in SCOT is fine because we can email the PO through configuration to the vendor without problem. It is just these extra copies that do not work.
a) We are modifying our custom Print program to add the code below after closing the form.
in few words:
a) We are getting the OTF from closing the form.
b) Converting the OTF to PDF
c) Sending the PDF as attachment.
data: lt_docs      TYPE TABLE OF docs.
data: pdf_bytecount TYPE i.
data: begin of pdfout occurs 0,
   tline type tline,
end of pdfout.
Ende Formulardruck --------------------------------------------------*
CALL FUNCTION 'CLOSE_FORM'
       IMPORTING
            result = result
       tables
            otfdata = otf.
IF RESULT-TDSPOOLID NE SPACE.
    SPOOLID = RESULT-TDSPOOLID.
    PERFORM PROTOCOL_UPDATE USING '320' SPOOLID SPACE SPACE SPACE.
ENDIF.
if result-userexit eq 'C' or
      result-userexit eq 'E'.
    retco = '9'.
endif.
CALL FUNCTION 'CONVERT_OTF_2_PDF'
    IMPORTING
      bin_filesize           = pdf_bytecount
    TABLES
      otf                    = otf
      doctab_archive         = lt_docs
      lines                  = pdfout
    EXCEPTIONS
      err_conv_not_possible = 1
      err_otf_mc_noendmarker = 2
      OTHERS                 = 3.
Creation of the document to be sent File Name
   maildata-obj_name = 'TEST'.
Mail Subject
   maildata-obj_descr = 'Subject'.
Mail Contents
   append mailtxt.
describe table mailtxt lines tab_lines.
read table mailtxt index tab_lines.
maildata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( mailtxt ).
Creation of the entry for the compressed document
clear mailpack-transf_bin.
mailpack-head_start = 1.
mailpack-head_num = 0.
mailpack-body_start = 1.
mailpack-body_num = tab_lines.
mailpack-doc_type = 'RAW'.
append mailpack.
Move OTF code to structure SOLI form email
CLEAR solisti1. REFRESH solisti1.
LOOP AT otf.
solisti1-line = otf.
APPEND solisti1.
ENDLOOP.
Move pdf code to structure soli form email
clear solisti1. refresh solisti1.
loop at pdfout.
    solisti1-line = pdfout.
    append solisti1.
endloop.
loop at solisti1.
     move-corresponding solisti1 to mailbin.
     append mailbin.
endloop.
describe table mailbin lines tab_lines.
mailhead = 'TEST.OTF'.
mailhead = 'TEST.PDF'.
append mailhead.
Creation of the entry for the compressed attachment
mailpack-transf_bin = 'X'.
mailpack-head_start = 1.
mailpack-head_num = 1.
mailpack-body_start = 1.
mailpack-body_num = tab_lines.
mailpack-doc_type = 'OTF'.
mailpack-doc_type = 'PDF'.
mailpack-obj_name = 'TEST'.
mailpack-obj_descr = 'Subject'.
mailpack-doc_size = tab_lines * 255.
append mailpack.
mailrec-receiver = '[email protected]'.
mailrec-rec_type = 'U'.
append mailrec.
mailrec-receiver = '[email protected]'.
mailrec-rec_type = 'U'.
append mailrec.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
          EXPORTING
               DOCUMENT_DATA              = maildata
          TABLES
               PACKING_LIST               = mailpack
               OBJECT_HEADER              = mailhead
               CONTENTS_TXT               = mailtxt
               RECEIVERS                  = mailrec
          EXCEPTIONS
               TOO_MANY_RECEIVERS         = 1
               DOCUMENT_NOT_SENT          = 2
               DOCUMENT_TYPE_NOT_EXIST    = 3
               OPERATION_NO_AUTHORIZATION = 4
               PARAMETER_ERROR            = 5
               X_ERROR                    = 6
               ENQUEUE_ERROR              = 7
               OTHERS                     = 8.
ENDFORM.

Dear Monica,
You need to configure the system with respect to functional point of view and need to write the following code in print program. i have done this and solution is as follows.
<b> Reward me for this solution.</b>
Process 11 (MM)     Sending RFQs and POs to vendors directly from the system instead of sending thru Courier or Fax
Existing Process (AS-IS)     Presently system is not supporting this requirement
Business Requirements     RFQs to be linked with vendor master with e-mail to send enquiries directly through system instead of courier/fax. Vice versa P.Os. Specifications, drawings should also go to vendor along with mail.
To-Be
Configuration Settings:
1) Spro Materials management Purchasing Messages Output control Message types Define message types for RFQ/ PO
     Created ZEK1,ZMI and ZEK2 for RFQs
     Created ZIK,ZOC,ZOK,ZOM,ZSI, ZSK2 and ZSM for Pos
     The above New output types Included with existing Print Forms and Programs but modified with External send(5) medium, and added companys letter head thru ABAP developments (details provided below)
     The above new output types also maintained for Fine- tuned control (thru same navigation) for New(1) and Change(2) operations
      2) Spro Materials management Purchasing Messages Output control Message   determination schemas Define message schema for RFQ/ PO
     Maintained the new output types in the control data
3)     Maintain Condition records for the New out put types (copied same document types from the existing old output types)
Easy access Logistics Materials management Purchasing Master data Messages MN01 (for RFQs)/ MN04 (for Pos)
4)     Maintain Email id of Vendor in Vendor master.
Developments (ABAP):
1) Copied the existing print programs and forms of the corresponding out types.
2) Addition of header window in each corresponding form (HEADER window). Uploaded the HEADER3 graphics in the header window.
INCLUDE HEADER3 OBJECT GRAPHICS ID BCOL LANGUAGE EN
3) Added the the following code in TOP includes
                   TYPE-POOLs szadr.
           INCLUDE: LMEDRUCKF09.
data: intnast         LIKE snast,
      lvs_recipient   LIKE swotobjid,       "Internet
      lvs_sender      LIKE swotobjid,       "Internet
      lvs_comm_type   TYPE ad_comm,
      lvs_comm_values TYPE szadr_comm_values,
      p_retco         TYPE i.
5)     Addition of the perform to SOS include for header window display
       PERFORM WRITE_FORM_HEADER.
*&      Form WRITE_FORM_HEADER
      text
--> p1        text
<-- p2        text
FORM WRITE_FORM_HEADER.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
   ELEMENT                        = 'HE1'
   FUNCTION                       = 'SET'
   TYPE                           = 'BODY'
   WINDOW                         = 'HEADER'
IMPORTING
   PENDING_LINES                  =
EXCEPTIONS
   ELEMENT                        = 1
   FUNCTION                       = 2
   TYPE                           = 3
   UNOPENED                       = 4
   UNSTARTED                      = 5
   WINDOW                         = 6
   BAD_PAGEFORMAT_FOR_PRINT       = 7
   SPOOL_ERROR                    = 8
   CODEPAGE                       = 9
   OTHERS                         = 10
ENDFORM.
6)     In the corresponding FORM include the following code has been added.
DATA: lvs_comm_type     TYPE   ad_comm,
        lvs_comm_values   TYPE   szadr_comm_values,
        xprogramm         type   sy-repid.
... use stratagy to get communication type
      CALL FUNCTION 'ADDR_GET_NEXT_COMM_TYPE'
           EXPORTING
                strategy           = nast-tcode
                address_number     = lfa1-adrnr
           IMPORTING
                comm_type          = lvs_comm_type
                comm_values        = lvs_comm_values
           EXCEPTIONS
                address_not_exist = 1
                person_not_exist   = 2
                no_comm_type_found = 3
                internal_error     = 4
                parameter_error    = 5
                OTHERS             = 6.
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
           WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
convert communication data
      MOVE-CORRESPONDING nast TO intnast.
      MOVE sy-repid           TO xprogramm.
7) By using the function module we can get sender and reciepient mail ids to variables lvs_recipient    lvs_sender
      CALL FUNCTION 'CONVERT_COMM_TYPE_DATA'
           EXPORTING
                pi_comm_type              = lvs_comm_type
                pi_comm_values            = lvs_comm_values
                pi_country                = lfa1-land1
                pi_repid                  = xprogramm
                pi_snast                  = intnast
           IMPORTING
                pe_itcpo                  = itcpo
                pe_device                 = xdevice
                pe_mail_recipient         = lvs_recipient
                pe_mail_sender            = lvs_sender
           EXCEPTIONS
                comm_type_not_supported   = 1
                recipient_creation_failed = 2
                sender_creation_failed    = 3
                OTHERS                    = 4.
      IF sy-subrc <> 0.
      Avoids cancellation with message TD421
        p_retco = '1'.                                           "831984
        PERFORM protocol_update USING '740' space space space space.
      dummy message to make the message appear in the where-used list
        IF 1 = 2.
          MESSAGE S740(me).
        ENDIF.
        EXIT.
      ENDIF.
      IF xdevice = 'MAIL'.                                       "885787
    Check validity of email address to avoid cancellation with TD463
        CALL FUNCTION 'SX_ADDRESS_TO_DEVTYPE'                    "831984
          EXPORTING
            recipient_id            = lvs_recipient
            sender_id               = lvs_sender
          EXCEPTIONS
            err_invalid_route       = 1
            err_system              = 2
            OTHERS                  = 3.
        IF SY-SUBRC <> 0.
          p_retco = '1'.
          PERFORM protocol_update USING '740' space space space space.
       dummy message to make the message appear in the where-used list
          IF 1 = 2.
            MESSAGE S740(me).
          ENDIF.
          EXIT.
        ENDIF.
      ENDIF.
8)     Attaching the new print program and form in NACE transaction.
Steps for End user:
1)     Creating the Purchase Order or RFQ with suitable document type through ME21N or ME41 .
2)     Executing the transaction ME9F and in selecting the suitable output type.
3)     Executing the transaction ZSEND_PDOC using INT as input.
4) With above steps we can able to send purchase order or RFQ to vendor as an attachment through e-mail in PDF format.
Regards
Badari

SBO mailer working fine but attachment is not coming

Dear All
We have configured the sbo mailer and mails are coming accordingly also, but attachments are missing in mails.
*** SAP Business One Client Log ***
WaitForSingleObject has finished with return value:0
SAP Business One Client return code:0
Distributing results
Unable to extract HTML report output to file C:\Windows\TEMP\Report.html Error code:-2028
Unable to extract PDF report output to file C:\Windows\TEMP\Report.pdf Error code:-2028
Unable to extract XML report output to file C:\Windows\TEMP\Report.xml Error code:-2028
SMTP Server: secure.emailsrvr.com:25
Sender Email: USER<[email protected]>
Sending email to [email protected]
Schedule processed
Please suggest the solution.
Regards
Ravi

Hi Ravi,
Please check Right of Attachment Folder for user.
If user is not having Right to access Attachment Folder then Attachment will not come in mail.
Please provide sufficient right to user for attachment folder then check.
Hope this helps
Regards::::
Atul Chakraborty

Can we add a new attachment to an existing SC from any other custom page in SoCo PO View

Hi Experts,
Need your expert advice on the below requirement.
We have created a custom view in SoCo PO page. There we have a New custom view called Notes&attachement.which contains same value from Notes & attachment of Shopping Cart.
We are updating existing Notes of SC by FM 'bbp_pd_sc_update' and same is reflected in SC of same item guid & same header guid.
Similarly trying to add a new Attachment to already existing attachment. New attachment is reflected in custom page and the describe link is working perfectly. but if come out of SoCo page , lets say in SC the new added attachment is shown but display_url,phio_size etc are not stored properly in DB.
in bbp_pd transaction every thing looks same for new and existing attachment. we are using same FM 'BBP_PD_SC_UPDATE' by passing new internal table of attachment in import statement. Even 'BBP_PROC_DOC_UPADTE' has same result that is attachment is partially updated.
Suppose, SC has one attachment at the time of creation. then adding a new attachment in custom view of SoCo PO page then every thing works fine in SoCo PO page but out of that SoCo PO or in SC the newly added attachment is not properly updated.
I have added mime_type,phio_size,disp_url,file_name,file_ext,ev_content of new attachment in existing attachment internal table and calling above FM for update.
Can we add new attachment outside SC to existing SC ? if yes , then how?
Thanks,
Partha

Hi Partha,
Please post this query in the category: SAP SRM. Your post currently shows up on the forum - SRM User Interface Add-on. As your query is not related to the new ad-on, you might not get as many responses in this forum as you would have if you had posted the query in the general SRM forum (http://scn.sap.com/community/srm).
Hope this helps
Cheers,
Yateesh

EIT Attachment does not appear in Core HR

Dears
We are using 12.1.1, when employee from SSHR attache a document in EIT from review page and after approval, attached file not coming in enter and maintain for or EIT form in core HR, there is a document says:
1. On the Review page click on Personalize Page
2. Click Complete view and Expand All
3. Search for Message Check Box: Save attachments
4. Click on Pen icon against it and Render this to True.
5. Apply and Return to Application.
6. You will see a Save Attachments checkbox in the Attachment region
7. Add an attachment and select the Save Attachments checkbox
8. Retest this issue
The problem is i am not able to find Check Box: Save attachments
what i have to do
regards

Hi,
Below is the code which help you out.
FND_ATTACHED_DOCUMENTS2_PKG.copy_attachments(
X_from_entity_name => 'PQH_SS_ATTACHMENT', -- fixed to pick attachment saved against transactiion
X_from_pk1_value => /*select T.TRANSACTION_HISTORY_ID FROM PQH_SS_TRANSACTION_HISTORY T WHERE <your custom codition here>*/,
X_to_entity_name => /*Try to upload attachement in PUI and query table FND_ATTACHED_DOCUMENTS to get the correct entity name, i dnt know the exact name at this point in time :)*/,
X_to_pk1_value => /*Primary key of your EIT record where transaction is saved after approval);
You need to create a concurrent and schedule it.
Regards
Ayaz

.attachment XI_Context not found

Hi All,
I have configured IDoc to JDBC scenario.
Depending on specific field value I need to decide Receiver.
But tht field is not present in IDoc, So i have configured RFC Lookup and used extended receiver determination.
I have tested Message Mapping and Operation Mapping successfully.
However while doing end-to-end testing I am getting error as
".attachment XI_Context not found" in trace file.
I have given correct opertaion mapping name and RFC channel name.
I am working on PI 7.1.
Please Suggest.
Thanks & Regards,
Manisha

Hi,
I am not able to see wht request and response is rfc is using...can u tell how to see?
I have seen tht my RFC communication channel is not getting called..But I don't know the reason for tht.
I have mentioned working CC in receiver determination.
Please Suggest.
Manisha
Edited by: Manisha Dahatonde on Nov 10, 2009 2:09 PM

"Add New Tab" button does not exist in the Window -Customize Toolbar, and not on my Navigator toolbar. Where can I find one to put on my Navigator toolbar, please?

I see "Add New Window" but..."Add New Tab" button does not exist in the Window -Customize Toolbar any longer, and not on my Navigator toolbar. Where can I find one to put on my Navigator toolbar, please?
Thanks

It's the "+" on the Tab bar. You can move it to the Navigation Toolbar if you prefer. When you start Customize, the + moves to the far right end of the Tab bar. You can drag it where you want (see attached image).
Any luck?

How to add a normal attachment in my apple mail?

Apple mail is so slow when I want to add attachment to my message. I think the reason is that when I add eps file or other files, apple mail does not simply add it, but integrating it into my context. But I don't need it to do that. And because the process is so slow(my eps file is kind of large...), it wastes a great amount of my time doing it. So far I'm satisfied with other functionalities of this software so I really don't want to give it up easily.
So, any one know if there is a simple way to add a normal attachment into apple mail message? Like what we usually do in any other email client? Thanks.

Try turning them into a zip file before attaching. From Finder Help:
Compress and uncompress files and folders
Compressed files take up less disk space than uncompressed files, so compressing is useful for making backup copies of your data or for sending information over the Internet.
To compress a file or folder, Control-click it or tap it using two fingers, and then choose Compress from the shortcut menu.If you compress a single item, the compressed file has the name of the original item with the .zip extension. If you compress multiple items at once, the compressed file is called Archive.zip.
To uncompress (expand) an item, double-click the .zip file.

TS3276 I need to send a photo via email as an attachment and not it shown in the body of the email?

I need to send a photo via email as an attachment and NOT have it shown in the body of the email? Please help.

To make attachments not appear in the body of the e-mail as a default, try using the Applications/Utilities/Terminal command below. I suggest copy and paste.
defaults write com.apple.mail DisableInlineAttachmentViewing -bool YES

Start bpm process with attachment or note

Hi All
Is there any way to start BPM process and add attachment or note to it.
My client requirement is that when the process is started requester should be able to add file or note.
This note or file should be visible in UWL task (in section attachments or notes)
Is there any way to do it using standard.
I know that I can store note in context of BPM process but customer is really pushing for standard.
Regards

Not sure if the requester is in BPM or outside BPM.
You can do this by keeping requester in BPM i.e. trigger BPM and give requester a task. (Dont think its preferred design).
In UWL you can let user add a memo or attachment... Refer below doc
SAP NetWeaver Business Process Management Resource Center
-Abhijeet
Edited by: Abhijeet on Dec 10, 2011 5:21 AM

Attachment Buttons not coming in Task TS17900101 of HCM Forms and Process

Hi ,
We are using HCM Forms and process for changing employee organization unit which is linked with workflow for approvals.
In this workflow we are calling standard task TS17900101 .Till now every thing is working fine but the problem is with attachments as their is a requirement to show attachments button with this Approve and Reject Task. But as per my knowledge SAP has not given any option to attach documents with this task which is however only possibe through TS17900100.
So can u suggest any way to attach documents with Approve and Reject Task which is TS17900101.
Thanks,
Rahul

Hi,
i have the same problem and no idea how to solve it.
Please let me know, what enhancing module pool code helped you
Thanks,
Galina

Attaching "faux notes" to Address Book contacts

Lots of CRMs and Personal Organizers let you attach multiple notes to a Contact, along with a datetime stamp for that Note. Address Book does not, alas.
Leopard's Email client, however, let's you create free-standing Notes for your Inbox (or wherever you drag them). But these cannot be attached to a contact.
My "workaround" for this is:
1) Create a new "ON MY MAC" mailbox called "Faux Notes"
2) Create a New Message for the contact(s) you want to affiliate this "faux note" to
3) Save it as a Draft
4) Drag it from the "Drafts" folder over to your "Faux Notes" mailbox. This shall ensure that you cannot email your note off to the contact(s) by mistake. The Faux Note also becomes read-only at this point.
5) If you want to edit or add to that "Faux Note," then you must first drag it back to the Drafts folder.
Voila!
Benefits:
A) Faux Notes are searchable in Spotlight (as are regular Notes).
B) Faux Notes show up in Smart Mailboxes such as those created by the handy "Mailboxer" utility (http://earthlingsoft.net/Mailboxer).
Now, I just wish I could figure out how to attach a button to the View Contacts pane of Address Book that would kick off an on-they-fly Spotlight query for mail to/from all the email addresses affiliated with that Contact, as in:
[email protected] kind:email OR [email protected] kind:email OR [email protected] kind:email
Feedback welcome! I'm a recent Mac convert after having PCs for the past 15 years.
Regards,
Alan.

I placed this question up here almost two years ago, and the problem has since resolved itself. I think because I have upgraded my mac's operating system (OS) several times since then.
You might want to check and see if you're using the latest version of Mac OS X (currently 10.8.4). If you're not up-to-date, go into the App Store on your Mac and see if there is an OS update waiting for you. That might help.
Good luck.

Suggestion: Add ability to attach a note to a specific webpage

Similar Messages

Maybe you are looking for