Suggestion and ebook for BIW

Dear All,
I am a new entrant in BIW,pls suggest me how to start with process and send me some ebook which will be helpful to
start my BIW career.
my email id:[email protected]
Regards,
Arup Dutta

Hi,
As mentioned above SDN is great place to learn.If you can spend some money for hard copy books then you can buy BW books from Sappress.Please take a look at the books published by Sappress.
http://www.sappress.com/library.cfm?account=&library=H2942
http://www.sappress.com/library.cfm?account=&library=H1960
Regards.

Similar Messages

Suggestion and Comments for a w530 unit

Hello Everyone,
I've been using macbookpro for almost 4 years, and since I heavily use AutoCad, Sketchup and Lightroom on a daily basis it has been a bothersome to rebooth from one OS to another. I have been looking at the W530 for quite sometime and decided to make the swtich. I hope someone can enlighten me on how to go about the purcahsing of W530. From Lenovo site, i intend of getting this specification and minor upgrade of some specs:
Lenovo w530 Intel Core i7-3940XM Processor Extreme Edition (8M Cache, up to 3.80 GHz)
Window 7 pro 64 bit
Lightroom 4
15.6" FHD (1920 x 1080) LED Backlit AntiGlare Display, Mobile Broadband Ready
NVIDIA Quadro K2000M Graphics with 2GB DDR3
16 GB PC3-12800 DDR3 (4 DIMM)
500GB Hard Disk Drive, 7200rpm
Bluetooth 4.0
Third Party Source Items:
Additional 2 8gb Ram, so total of 32GB
msata AData XPG x300 256gb
2.5" sata ssd 512gb
Hard drive caddy from new mode us. com
Questions:
1. If in case, I need to add additional ram, would it be okey to just buy an additional 2 pcs of 8GB of Corsair Vengance, or do i need to buy a new 4 pcs of 8GB? so the total ram would be 32GB. Or would it be wise to just get the 32GB of Ram from Lenovo?
2. I plan to use the 500gb HDD in the hard drive caddy and use the msata and 2.5" ssd for primary drive, What would be the best way to copy the Windows and Lightroom from the HDD to msata drive (256gb adata)?
3. How come some unit with the w530 comes with a color sensor option and the higher w530 specs does not? would it be wise to get the Color sensor/ calibration from Lenovo or Just get other calibration software? and can you suggest in your experience a good calibration software for w530?
4. and lastly, does all w530 whether it be lower end specs or high end spec has a msata connection? Sorry of the ignorance.
Really sorry for a long post and questions. I hope someone could enlighten me before i purchase this unit. Any suggestions and comment would be highly appreciated. Thanks

Hi.
I'm almost in your same boat; used a Macbook when travelling for AutoCAD and I just ordered a W530 (should arrive Thursday) after a long period of agonizing of the purchase. I'll update this thread once I've used it a bit if you'd like, but I have some comments on your post:
1. My understanding is that RAM works best when all sticks are of the same capacity. Personally, I ordered the W530 with the least RAM possible and am replacing all factory with Corsair Vengance.
2. Use drive cloning software.(check out this site: http://lifehacker.com/5839753/the-best-disk-cloning-app-for-windows). I'm eschewing the mSATA and going with a 500gb SSD (found the Samsung 840 for $279) as the main drive with the 500gb HDD in the ultrabay (mSATA slot vacant). Why do you need the hard drive caddy?
3. Not sure. I didn't go top-of-the-line as you are so my config had the color sensor option.
4. All have the mSATA.

Suggestions and enhancements for iPhoto 8

a) Keyword management. iPhoto 8 is much better than 7, however there should be a way to type in (not select from a list) keywords for multiple selected photos. Just like Keyword Assistant. I need to quickly tag a large amount of selected photos, and clicking the scrollable keyword list is too confusing. Keep the scrollable list, but do provide a typing box to quickly jump to the desired keyword. E.g. typing "L" "o" should bring up London and Los Angeles very quickly.
b) Shrink photos. I shoot photos at maximum resolution, and then drop the resolution of the not-so-good pictures, or those that I have no intention of enlarging. The good ones, I keep at maximum resolution. I have created a shell script which wraps around Apple SIPS (Scriptable Image Processing System) command-line to reduce the megapixels of the photos that I want to shrink. I do this in 3 stages - 1. using applescript, generate a list of photos with the full file paths, 2. using jhead, determine the EXIF resolution of each photo and add it to the list, 3. using a shell script, use SIPS to reduce the resolutions of these photos. It would be nice to see this function built into iPhoto itself, with a choice of dropping the resolution to 6 MP, 4 MP, 3.2 MP, 2 MP, etc. It should be able to tackle landscape and portrait orientations automatically.
c) CDs for non-Mac (Windows, Linux) computers. The current procedure, to export the photos to a file folder and burn them wastes too much space, and is a work-around. iPhoto should be able to do a simple folder-wise burn to CD, without keeping any library metadata
d) Photo portability: Embed comments, titles and keywords in the EXIF data of the photos itself, so that the photos become extremely portable. In case the library metadata is destroyed, it is easy to get back information from backed up JPGs itself. Also, exporting to web albums is easy and preserves more metadata.
e) Library database: It is time to move to SQLite and drop the clumsy XML format. Please please please! Just like Mail.app.
f) Movie clips during slideshows: Allow playback of movie clips within the iPhoto slideshows. Right now, the only way to do it is to pause the show, have QT player open on the side, show the clip (in non-fullscreen) and then come back to the show. *****.
g) Calendar based photo selection, e.g. what photos have been taken in the month of April 2007? Or what photos taken on June 22nd 2007. Please bring the feature back from iPhoto 7.

saumil
Welcome to the Apple Discussions.
iPhoto menu -> Provide iPhoto Feedback
However, some comments:
b) Shrink photos.
The philosophy of iPhoto is to perform all operations on a copy of the file - so doing this would actually use more disk space, not less. For my money the risk of data loss if this philosophy is changed for some operations is too great.
The current procedure, to export the photos to a file folder and burn them wastes too much space, and is a work-around.
How does that waste space? Just trash the exported pics after burning.
d) Photo portability: Embed comments, titles and keywords in the EXIF data of the photos itself, so that the photos become extremely portable. In case the library metadata is destroyed, it is easy to get back information from backed up JPGs itself. Also, exporting to web albums is easy and preserves more metadata.
You can do this using the File -> Export command currently in v7.
e) Library database: It is time to move to SQLite and drop the clumsy XML format. Please please please! Just like Mail.app.
Um, this happened back with v6, that's what the main database file is (library6.iphoto). The xml file is what other apps read to integrate with iPhoto.
f) Movie clips during slideshows: Allow playback of movie clips within the iPhoto slideshows. Right now, the only way to do it is to pause the show, have QT player open on the side, show the clip (in non-fullscreen) and then come back to the show. ***
Not what you want to hear, but this is currently available in PhotoPresenter.
g) Calendar based photo selection, e.g. what photos have been taken in the month of April 2007? Or what photos taken on June 22nd 2007. Please bring the feature back from iPhoto 7.
You mean what you get if you click on the magnifying glass in the search window and select date?
Regards
TD

FAQ Suggestions and Corrections

This thread is available so you can recommend suggestions and corrections to the FAQ.
Please add only FrameMaker FAQ related entries here.
Please post software-related questions to the regular FrameMaker and FrameMaker+SGML forums and topics. Do not post them here. This topic only concerns suggestions and questions for the FAQ.
Thanks!
Sean

Sean,
I know, I know: everybody's an editor, but how about this?
To create a PDF from FrameMaker make sure that you have installed the Acrobat Distiller printer instance. This is NOT done by using the Add Printer option found in Start > Settings > Printers. Instead:
1. Download the latest Adobe Universal Printer Driver Installer from Adobe.
2. Make sure you have the latest PPD file available. You will be asked to find it during printer installation.
3. Double-click the .exe file to install the driver you downloaded.
4. When you are asked for the PPD file, browse to find it on your system.
Now you will have a printer instance called Acrobat Distiller. Use this printer when you create PDF files or when you create PostScript files from FrameMaker.
Do not use Save As PDF! This seems handy, but doesn't let you control Distiller job options. Instead:
1. From your Frame file or Frame book file, Print.
2. Make sure to select Print to File.
3. Make sure that Acrobat Distiller is the printer selected. It is good practice to make sure Acrobat Distiller is the default printer for your system before you go from Frame to Acrobat.
4. Distill the resulting postscript file.
Using watched folders can make your Frame-to-Acrobat tasks nearly automatic. See the Acrobat Guide for more information.
Sean, I think that your post may give the beginner a little too much information they won't understand until they've been at this for awhile. The "If you are outputting to a service bureau..." part for example. I think the FAQ should answer the questions for beginners. As they gain more experience and confidence, they will start to do things your way--the daring Save As, for example!
Your troubleshooting ideas are great. Can you add, under the b&w or grayscale PDF problem that it might be caused by selecting Spot as Black in the Frame print dialog?
Hope I'm not too much a pain about this... Also hope I didn't mess up the details in my suggestions...
Jeanie

Apps licensing and pricing for school libraries

I'd like to know how prices are formed for apps which will be delivered to students and staff over school networks. I am particularly interested in licensing and pricing of apps and ebooks for the school library.
Thanks!

OC4J is delivered with Oracle9iAS Standard Edition.
Oracle9iAS is delivered in 3 editions - Standard, Enterprise and Wireless. The Packaging Summary provides more detail. <li>Oracle9iAS is priced using Universal Power Unit pricing - Standard is $5/UPU, Enterprise is $30/UPU, and Wireless is $150/UPU respectively.
Check out oraclestore.oracle.com for more information on licensing</li>

HT204053 i accidently set up one account for i cloud and one for itunes. suggestions on how do i update this to only the one. please on how do i change my icloud to be the same as my itunes acct. thanks

i accidently set up one account for icloud and one for itunes; suggestions on how to correct this and use just one account for both.... thanks

If you want to change your iCloud ID to another existing ID you'll have to delete the account, create a new account with the other ID, and migrate your data to the new account. To do this, first go to Settings>iCloud on your phone and turn all data you are syncing with iCloud (contacts, calendars, etc.) to Off. When prompted choose to keep the data on your iPhone. (If you are syncing iWork documents with iCloud, also open your iWork apps and turn off iCloud syncing and choose to keep the documents on your phone.) After everything is turned off, scroll to the bottom and tap Delete Account. Next, set up a new iCloud account using your other ID, then turn syncing for your data (contacts, etc.) back to On. When prompted, choose Merge. This will upload the data to your new account.
This will not move your photo stream, however. If you have photos in photo stream that aren't in your camera roll and that you haven't backed up anywhere else you will need to save these before deleting the account. To do this, open your photo stream album on your iPhone in the thumbnail view, tap Edit, tap all the photos to select them, tap Share, then tap Save to Camera Roll. You can then delete the iCloud account and your photos will stay in your camera roll.

I have iphone 4s and just bought an ebook for ibook, trouble is the font is so tiny I can't read it and the font sizer is not working? Please help!

Hi, I have the iphone 4s and just bought an ebook for ibook, trouble is the font is so tiny I can't read it and the font sizer is not working? Please help!

Hello Glittergirl68,
Thank you for using Apple Support Communities.
It sounds like the function to reseize the Font in an iBook is not functioning properly.
I recommend a few things here. First close all the apps that are running in the background:
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
From: iOS: Force an app to close
http://support.apple.com/kb/ht5137
When you have done that, restart the phone, and try again.
If the issue persists, I would follow these steps from the article:
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
2. Check for app updates
You can setup apps to update automatically in Settings > iTunes & App Store, but make sure that your apps are up to date:
Open the App Store and tap Updates. If updates are available, tap Update All.
If prompted, enter your iTunes Store account information. App Store will then download and install the app updates.
Note: Some apps may require a Wi-Fi connection to update.
3. Install another app from the App Store
If none of your user-installed apps will launch, there could be an issue with Apple ID authorization. Download and install an app that isn't already installed on your device to reset this information. You can also remove an app from your iOS device and download it again from the App Store or sync the app from your computer.Note: If you have installed apps using multiple Apple ID accounts, you may need to perform this step for each account.
4. Restart the app
If the issue affects only a single app, try closing just that app.
5. Restart your device
Turn the device off and on.
6. Reinstall the affected app
Remove the app from your device and reinstall it:
Tap and hold any app icon on the Home Screen until the icons start to wiggle and show a small "x" in the top-right corner of the app.
Tap the "x" in the corner of the app you want to delete.
Tap Delete to remove the app and all of its data from your device.
Press the Home button.
Go to the App Store.
Search for the app and then download it again.
All the very best,
Sterling

TS4062 I've done all of these recommended steps. My problem is that I have a new laptop that I am trying to sync my iPhone (and iPad for that matter) via Wi-Fi but both devices are looking for the old laptop to sync. Any other suggestions?

I've done all of these recommended steps. My problem is that I have a new laptop that I am trying to sync my iPhone (and iPad for that matter) via Wi-Fi but both devices are looking for the old laptop to sync. My iTunes is version 11.0..3.42, iPhone is 6.1.4, and iPad 6.1.3. Any suggestions?

All I had to do was complain. I synced my iPhone to the Windows machine, checked the other account at iTunes prompting (where no apps had shown up previously), reconnected the iPad, and 140 apps downloaded including the App Store. I have no idea why.

I have an IMac and would like to scan and edit scans can anyone suggest a scanner for the Mac

Help. I have an IMac and I want to scan and be able to edit my scans and I have received so many different opinions on how to do this. Buy a separate scanner or buy an all in one that scans but you have to get software to edit. It is really confusing so before I purchase a scanner I need to know if anyone else is doing this and what machine should I buy. Thanks for the help.

SaugusGirl wrote:
Hi and thanks for replying. I have a management company and I would like to scan a document and then be able to go in and make changes if necessary. Some people told me to purchase a Fujitsu 1500 scanner for the Mac which costs about 500.00 but didn't think I needed something that sophisticated and then another opinion was to get an all in one but I need software to edit and no one seems to know what software to purchase. Thanks again for your input.
Get the Fujitsu (Get the M1500, the S1500 is for Windows), it comes with ABBy Fine Reader OCR software that is probably less good than Vuescan but for printed text works just fine, handwriting is a different matter. It is about $500 (look around, under $400 is sometimes possible) don't buy the S version, none of the software will work on a Mac. I've used this scanner fairly often, it's better than the price would suggest.

Where can we suggest new features for Yahoo Messenger and other RIM IM clients?

I just downloaded the new version of Yahoo Messenger and I like the user interface. But every time a new version comes out, this application creates a less-complete history of contact behavior. Several versions ago, the contact's status showed up in the open conversation, along with the time stamp of when the status changed. This included Idle and Custom Status changes. That disappeared. In the last version, you could see the time the contact signed in or out last, and sometimes both. Now they're gone as soon as you close the conversation.
The whole idea of having Yahoo up on the BlackBerry all the time is that you don't have to be staring at the screen all the time, that you should be able to take it out of your pocket and check out those events that occurred that didn't set off alarms. I'd like the whole contact history to be right there, for as long as I want to keep it active. How can I make this suggestion to RIM for the next version of Yahoo Messenger? Thanks.
Message Edited by kstrouse on 07-10-2008 02:20 PM
Solved!
Go to Solution.

This is a good place to share your thoughts and ideas. RIM could easily get these info as this community is build by RIM.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Can you suggest a widget for RSS feeds and blog updates?

Is there such a thing? So I can subscribe to various blogs and have them in one handy place...

HI
Can anyone suggest a software for OS imaging from windows (i saw the the software somewhere in the client i couldn't remember the name of it)
it was pretty simple and it can be used easily like Acronis , it doesn't require any license like Acronis
My requirement
Take the system image put in the external drive , whenever i required i want to boot up with same drive and push image
This topic first appeared in the Spiceworks Community

SUGGESTION ON BEST External HD to work with Mac Air and Logic - for sample streaming.

SUGGESTION ON BEST External HD to work with Mac Air and Logic - for sample streaming.

huge storage, low cost, high quality, very small and portable.
BEST FOR THE COST, Toshiba "tiny giant" 15mm thick 2TB drive (have several of them, lots of storage in tiny package)    $100
http://www.amazon.com/Toshiba-Canvio-Connect-Portable-HDTC720XK3C1/dp/B00CGUMS48    /ref=sr_1_3?ie=UTF8&qid=1390020791&sr=8-3&keywords=toshiba+2tb
best options for the price, and high quality HD:
Quality 1TB drives are $50 per TB on 3.5" or $65 per TB on 2.5"
Perfect 1TB for $68
http://www.amazon.com/Toshiba-Canvio-Portable-Hard-Drive/dp/B005J7YA3W/ref=sr_1_ 1?ie=UTF8&qid=1379452568&sr=8-1&keywords=1tb+toshiba
Nice 500gig for $50. ultraslim perfect for use with a notebook
http://www.amazon.com/Toshiba-Canvio-Portable-External-Drive/dp/B009F1CXI2/ref=s    r_1_1?s=electronics&ie=UTF8&qid=1377642728&sr=1-1&keywords=toshiba+slim+500gb
*This one is the BEST portable external HD available that money can buy:
HGST Touro Mobile 1TB USB 3.0 External Hard Drive $88
http://www.amazon.com/HGST-Mobile-Portable-External-0S03559/dp/B009GE6JI8/ref=sr    _1_1?ie=UTF8&qid=1383238934&sr=8-1&keywords=HGST+Touro+Mobile+Pro+1TB+USB+3.0+7 2 00+RPM
Most storage experts agree on the Hitachi 2.5"
Hitachi is the winner in hard drive reliability survey:
Hitachi manufacturers the safest and most reliable hard drives, according to the Storelab study. Of the hundreds of Hitachi hard drives received, not a single one had failed due to manufacturing or design errors. Adding the highest average lifespans and the best relationship between failures and market share, Hitachi can be regarded as the winner.

Suggestion: Play All and Shuffle for Video

I'd really like to make a suggestion for Play All, and Shuffle Play All for videos in TV. I really miss that about my EyeHome I could set it to play a TV show continuously while I work on other things, one time I had two seasons of a show play shuffled and continuously for 12 hours while I was working.
Also more sub menus. So I can have a TV show name, click to then show All the seasons of that show. Click a season to show all the shows in that season. But at the top of each menu to Play All, and Shuffle Play All. Sometimes I like to randomly play all of a certain show.
Also sub menus for movies. So Lord of the Rings will be listed, clicking it takes me to All three movies. At the top I can start to play them all in Order.

Might try posting in the appropriate forum -> Forum: Front Row

Every time I start my Apple TV it shuts down. I have to unplug it and wait for it to reconnect before I can use it. Any suggestions?

Every time I start my Apple TV it shuts down. I have to unplug it and wait for it to reboot before I can use it. This makes turning on Apple TV a very long process. Any suggestions?

That would be very hard to do, as I would have to do a lot of things--including moving furniture to get at the back of a receiver--and I'm not at all sure that the receive could accommodate it.
The process is like this: I dial the receiver to the Apple TV input. The light comes on, like it's connecting, but then the Apple TV goes dark before any connection happens. Then I unplug the power cord, wait a few moments, and plug it back in. Then the Apple TV actually connects, but only after a full reboot (setting time, etc).

Im looking for a MacBook that is worth the money and decent for gaming and editing, any suggestions?

Im looking for a MacBook that is worth the money and decent for gaming and editing, any suggestions?
There all so AWESOME!

Then you are best to get a Macbook Pro. Your real aim should be the graphics card.
You won't be doing really good gaming on a discrete graphics card sharing RAM.
Depending of coarse what games you play.
eg. card games / COD games.

Suggestion and ebook for BIW

Similar Messages

Maybe you are looking for