Suggestion-Cut and Paste

I would love to see a "Cut and Paste" function in the iphone. Hopfully the next OS update will have it.

Posting an opinionated statement about the iPhone on a forum meant only for user-to-user technical problem discussion does very little to get Apple listening. Believe me, it's already been said many, many, many times here. The chances are virtually null that an Apple iPhone engineer glances these threads, sees your post, and exclaims, +"Aha! A virtuous and profound prose! We shall add it now."+
Instead, send your thoughts directly to Apple:
http://www.apple.com/feedback/iphone.html

Similar Messages

Suggestion I made to Apple on Cut and Paste

I posted the following suggestion to the feedback web page on cutting and pasting with an iPhone:
You have undoubtably heard many requests for cut and paste. It seems to me based upon my two decades of software experience is that the text-based paradigm found in the emacs editor works works better than a mouse-based one. (As you stated in your developer guidelines a finger does not equal a mouse.) I suggest that double-tapping an editable region enters "edit mode" (and exits it also). Edit mode has four buttons. "Set mark", "cut", "copy", and "paste". "Set mark" sets a mark point at the current cursor location and creates a selection region between the mark point and the current cursor location. Cut, copy, and paste work in their traditional fashion of working with the OS X cut buffer.

See:
*http://kb.mozillazine.org/Granting_JavaScript_access_to_the_clipboard
*https://addons.mozilla.org/firefox/addon/allowclipboard-helper/ - AllowClipboard Helper

I can't cut and paste on my MacBook Pro, I can't cut and paste on my MacBook Pro

For some reason, I can no longer cut and paste anything on my MacBook Pro. Does anyone have any suggestions?

Reboot.

Mac running slow when cut and paste

Hi,
recently I noticed that my mac is running slow when I cut and paste (there is a delay of approx 1-2 secs). I thought it might be some kind of spyware which is trying to steal sensitive information such as passwords, credit cards and others. That would be surprising as I thought those were still rare in Mac. Any thought on this? Suggestions on how to protect my mac from these security issues? Thanks in advance!
Mauro

Morning smartasso,
Thanks for using Apple Support Communities.
If you find your Mac is running slowly, there are a number of potential causes that you can check.
For more information on this, take a look at this article:
OS X Mountain Lion: If your Mac runs slowly
http://support.apple.com/kb/PH10798
Best of luck,
Mario

Bit locker code /letters wont go in, even when I cut and paste it all in, it doesn't go through. I'm new to computers. Is this a con to get us to download shite?

Hi, I forgot my memory stick code. My bit locker code letters wont show on screen, even when I cut and paste it all in nothing happens, is this a con to get me to download shite I don't want.

Hi Franko,
We discuss SQL Server PowerPivot for Excel related issue in this forum. According to your description, it is more related to Windows Security. I would suggest you discuss this issue at the following forum for better support:
Windows Security forum:
http://social.technet.microsoft.com/Forums/windows/en-US/home?forum=w7itprosecurity
Regards,
Elvis Long
TechNet Community Support

Takes and comping live drums- trouble cutting and pasting comps- help

Senario, 10 tracks of drum mikes recorded in 8 takes. Swiping with groups on works like a charm. Issue, I want to be able to locate a 4 bar section in a comp and cut and paste it back to back and in every verse. It seems to work but when I go and start swiping takes to add to the comp, the comp pastes of the 4 bar piece starts playing something different than what was pasted there moments earlier. I then have to undo a few steps and cannot figure out what to do now.... Any tips, suggestions or work flows anyone can share with me regarding drum tracking. I have never tried to cut and paste within a comp and I want to believe that it should work just like editing regions. And then you can flatten ? Thanks

You hate takes, ok I don't really yet, but how do you put takes into folders without flattening first. So a folder opened up into an arrange window has folders named DRUMS TK1, DRUMS TK2, etc. But then you select all those takes and pack into yet another folder called DRUMS, Hmm. Copies of the folders you want to use, how do you determine what you want to use. I use the swipe feature and it shows me the sections from each take and I can hear what it all sounds like before flattening. Is your method a mix of old LP7 style drum take editing with packed folders ? If you are cutting the copied packed folders to taste, are you using the mute tool to shut off sections to audition each take ? Flattening using the glue tool, I am getting lost now sorry. I like the swiping feature especially when you have 13 drum tracks times 8 takes. I make a group called drums and when I swipe the Kick track let's say, all drum mikes get selected in the exact place and I can then audition each take by clicking on each kick take, then I move on after I choose a section. My problem arrived when I started to scissor cut the COMP folder before doing any flattening. It would appear to be editable just like a normal audio region and I wanted to just cut copy and paste the COMP folder while continuing to swipe and finish the COMP. Do you follow. I want to understand your method as well since I am still trying to get a system down for drum tracking with many mikes and takes. Thanks for your reply.
Message was edited by: Rexy

Cut and paste from Word into Mail

I have an earlier post where I thought I had solved this problem, but now it's back with a twist:
I can cut and paste from Word, but after a few cut and pastes, it seems as if I can only paste the last successful section of text: copying new text from word seems to work, but when pasting into Mail, only the previous section of cut and pasted text appears.
I have checked the preferences within Mail, and they are set for plain text... so there should be no problem, yes?
I also tried quitting and then restarting Mail, but had the same problem...
Any advice?

Thanks, aqua*star -
I just checked the "archiving" and "back-up" suggestions in the Mail "Help" window and got the following info:
Mail preferences and messages
Your Mail accounts, rules, signatures, and Smart Mailboxes preference settings can easily be backed up. Tip: All Mail-related preference files should be backed up or restored as a group.
To back up:
Note: These steps back up Mail preferences, but do not back up Mail messages (emails), although you can do that with the .Mac Backup utility. See below if you want to manually back up Mail messages (mailboxes).
Create a uniquely-named folder on your desktop (or other favorite location). For example, you might call it "Mail Prefs Backups May152005" (adding a date is a good idea).
Quit Mail if it's running.
In the Finder choose Home from the Go menu.
Open the Library folder.
Open the Preferences folder.
Copy the "com.apple.mail.plist" file to the folder you made in step 1 by Option-dragging the file. Don't remove the original file from its current location (this file contains your Mail accounts information).
Close the Preferences folder.
Open the Mail folder.
Copy the "MessageRules.plist" file to the folder you made in step 1 by Option-dragging the file (this file contains your Mail rules).
Copy the "SmartMailboxes.plist" file to the folder you made in step 1 by Option-dragging the file (you guessed it, this file contains Smart Mailboxes information).
Finally, copy the Signatures folder to the folder you made in step 1 by Option-dragging the folder. (Your custom signatures, if you use them, are stored here.)
To restore: Just move all of the copies of the files and folders from your uniquely-named folder to the original locations from which they came, as listed above.
It looks like I can save and restore the Mail rules separately from the plist...

Can't Drag and Drop, or cut and paste

Weirdest thing - all of a sudden I can't drag and drop, or cut and paste. I fixed permissions, deleted varied preference files and rebooted, reset the permissions on /tmp, etc. and still no go.
Any suggested avenues to find what the possible problem is, and how to solve (short of reinstalling)?

On the left side of the browser at the top of the iPhoto window you will see two symbols. The top one looks like a sheet of paper with the corner folded down, the bottom looks like multiple sheets/cards. If you click on the top symbol, you will view thumbnails of the pages in the book; the bottom gives you photos. At the bottom left of the window, there are two buttons above the word "view". Clicking on one button versus the other changes the window to view either one or two pages. This also affects whether or not the pages are locked together in the browser. When you are in page view, you can drag and drop pages in the browser to create the order you wish.
I hope this helps.

RAR5.3 not able to cut and paste list of users to Multiple Selection screen

CC V4.0 on ABAP system has a feature where you can cut and paste a list of many users from the clipboard to Single Values column in the Multiple Selection screen, so you can run SOD Analysis Report for all those users. The Multiply Selection screen is a standard SAP supplied pop up screen.
With RAR 5.3 the Multiply Selection screen design is different. There is no longer feature to cut and paste from clipboard. We have to input each user one at a time. So if you have many users (20, 30, etc.) it is a time consuming task. It is not acceptable to our business power users.
We can import the list of users to a Custom User Group (in the Configuration Tab). First of all, there is no mass delete on Custom User Group. You have to delete each user one at a time which is time consuming. The alternative is to create a new Custom User Group each time, then it becomes a maintenance nightmare. Secondly, it is in the Configuration Tab which is only available to Administrators (fear of users changing configuation data), so the Administrator (or whomever has access to the Configuration Tab) has to maintain the Custom User Groups which is a lot of work for him or her or them.
We talk to SAP every week. But they are looking at this as a long time project. Does any one of you (or your company) has the same requirements? How do you get around it? Did you setup some other procedures so users can cut and paste the users list and run the Risk Analysis report themselves?
Thanks,
John.

This is probably a JVM issue. Are you using JInitiator or the IE native JVM?
I suggest you turn on the JVM console, set the trace level to maximum, and then watch what happens when you attempt the copy.
Also, check the key mapping (usually ctrl-k) that the forms applet is implementing. Perhaps ctrl-c means something else...

Cut and Paste Cross References

As some of you know, I'm updating a book composed of chapter files, with cross references between chapters. This used to be incredibly buggy, with crashes and broken references common. Some of that is improved in CS5.5, but a couple of big issues remain, and I'm wondering if anybody has any suggestions.
Two problems:
You generally can't cut and paste a cross reference. I have text that says "see page 27". I want to move this somewhere else in the same document. Cut it. Paste it. The paste comes in looking like this: "see <?>" -- and you get a broken link in the Hyperlinks panel. That really limits text editing. It doesn't always happen. Sometimes you'll paste and your cross reference works. But that's rare. And you can never copy and paste. That always breaks.
Cross references refer to absolute file pathnames. I'd like to rename some chapter files. But I dare not because I assume that all cross references to destinations in those files will break.
Anybody have any suggestions for either of these things? Number 1 is a real work-stopper right now.
Many thanks,
Steve

Okay, guys -- I've made some progress. And I really appreciate your support, now, and in the past.
Upgrading from 7.5.2 to 7.5.3 -- no improvement,
Save a new copy of the file via Save As -- no improvement,
Export as IDML and then just double-click the IDML to open it -- worked! (Is that the correct procedure? Anything else I need to do?)
It's still just about suicidal to try and edit text in any story containing multiple cross references to chapter files that aren't open. And adding a new cross reference is super-slow, during which time you're sure you're going to crash. But with the imported file, the new cross ref held.
One other point of confusion: new cross references display differently than ones created in older versions of the software. The old ones have dark grey boxes around them. New ones have light blue boxes. No mention of this in the help file that I could find. Even if you update an old cross ref, the dark grey remains. Only starting from scratch produces light blue.
Something corrupted that file, which IDML got rid of. It was corrupted by doing little more than adding or updating a bunch of cross references, and doing some minor text editing. No images in the file, so that had nothing to do with it.
Chapter file sizes, since you asked, are anywhere from 3 to 40 mb. The file I was having problems with is only 2.5 mb. The book contains 22 chapters. Long ago I converted it from one big file to separate chapters. Easier to manage, chapter numbering works more logically and chapter starts are easier to handle. But cross references worked a lot better with the single file.
In any event, problem solved for the moment, so thanks very much again. But Adobe really needs to look at this. It's been broken for way too long.
Steve

"cut and paste" not working since lion download

Since downloading Lion, when I go to paste something I've cut into another doc, nothing happens.
I can cut and paste from email to email, but not from doc to email.
Any suggestions?

1. Open Disk Utility and repair the permissions
2. Go to Finder, press Option key, select Go > Library, open Preferences and delete com.apple.dock.plist
3. Read > http://www.reedcorner.net/understanding-upgrade-nightmares/ (Thomas)

Cut and paste from text field not working in early access JRE 1.90-ea-b38

I noticed that cut and paste no longer works with JRE 1.9 on Windows 7 professional. Anyone else having that problem?
I haven't posted a bug reports since the Sun days, is there still a place to post bugs?

Which advice didn't I follow?1) How to write a simple SSCCE.
Again why do you have a custom TableModel? It is not required for the SSCCE and in fact is not required for your real program.
Why is KeyListener code included. It has notthing to do with your question.
2) I also suggested you add the mouse listener to the text area. Well, the text area is defined in the popup dialog, not the editor in my original SSCCE. So why have you made the code so complex by defining a second text area?
I did look at your sample program (the table with pop-up menu appearing on right-click) That was only a wild guess because you didn't respond the second time when I asked you why the mouse listener wasn't added to the text area.

Very curious-cannot cut and paste

Well that about says it all. After using Captivate 2 for
about a week, cutting/copying and pasting to my hearts content,
suddenly that option is not available anymore. After rebooting and
bringing up Captivate 2 again I saw that I could paste. (I don't
know what I could paste, I just rebooted and didn't copy anything.)
Choosing paste didn't paste anyting into my slide. After rebooting
a second time I continued to not have copy/cut available and now
lost paste. I simply want to cut and paste again. Any
ideas/suggestions?

Reboot and try again.

While using marquee tool to cut and past section to new layer, outline stays transparent

Hello,
I am testing the trial version of Photoshop CS5.5 and I am experiencing a weird issue while using the marquee tool while selecting a portion of an image, cutting that section and pasting it to a new layer.
First off I am running Windows 7 Ultimate 64 bit, 2.8Ghz Dual Core Processor, 4 Gigs Memory, 2 Gig Video card and current on updates with a fresh vanilla install of CS5.5. Not filters or plugin installed.
Step by step of issue is as follows,
I take an image on layer 1 and while using the marquee tool select and area on that image. I want to cut and Past In Place that selection on a new layer, layer 3.
This will allow me to insert another layer, layer 2, in between layer 1 and layer 3 and show what ever I place on layer 2 but still have a complete background if the image does not fill the entire transparent section.
A good example is a wanted poster. You have your picture frame with the Wanted letters and reward. In the center you have a transparent square. In the back you have a black background. In between the frame and the background you place a face. The face will not fill the entire sqaure so you will see some of the black back ground.
Now the problem appears to be that the dotted line of the marquee selection makes so you can see your selection stays transparent or deletes the ares directly unter it when you cut and past to a new layer. The transparent outline looks to be the same size of the dotted line when that selection is selected. I have looked and searched for this promblem and resolution but can not see one.
The picture below is the result after I deselect the area. You can see just above another section that I tried to cover up but did not get it all.
This is driving me nuts and I just can not figure out what is causing this behavior. If I try and stretch the section, it skews the contents out of proportion.
An suggestions or information would be greatly appreciated!
Marquee Selection, Animated Lines Cut And Past In Place And Selection Deselected
Thanks

Instead of cut, one way is to duplicate the layer and add a layer mask from the selection. Alt click on the layer mask icon at the bottom of the layers panel to add a Layer Mask>Hide Selection.
Then you can put a layer in the middle.
The reason your seeing what's in your screenshot is the selection is anti-aliased,

Cut and Paste: Frame and Content Size Auto Changes

I'm working in InDesign CS2 and am having this reoccurring problem.
When I cut and paste frames with placed images (or pull images from a library) the frame and image will both expand to between 300%-3,000%. As you can imagine, it's very frustrating to have to create new frames and place new images every time. Any suggestions on how to fix or work around?

I'm still having problems with this, even using Paste and Match Style.
My table has three rows with gray background, then three rows of white; this pattern repeats for many rows. In the center row of each three rows is some text, while all other rows are blank. I want to move all this text down three rows, so that the text that was in the center row of the gray rows now is in the center row of the white rows, but I want the row colors to remain unchanged. Here's what I've tried.
If I "Cut" the selected cells, then the background colors are cut, so this is no good. Instead, I Copy the cells, then hit the Delete key. This leaves the background alone. Now I select a cell three rows down from the top. If I Paste, then the old backgrounds are pasted in, which is not the behavior I want. If I Paste and Match Style, then all the backgrounds are overwritten with white, except those single rows that originally contained both text, and had a gray background. The original cells that were gray but had no text are pasted in as white.
This latter behavior makes no sense to me. There seems to be a difference in how Paste and Match Style works, depending on whether the copied cells had text, or were blank.
Is there another way to do this rather common task—moving text around a table that has alternating-colored rows, without messing up those colors?

Suggestion-Cut and Paste

Similar Messages

Maybe you are looking for