Suggestion for First update to 7dMii firmware :)

I know it's early, and it's only been just released, but the one thing that bothers me is that the GPS stays on even when you switch the power off. I can understand it staying on when the camera is in "sleep" mode, but when I turn the switch off it should shut EVERYTHING off. Otherwise you have to always remember to disable the GPS and then turn it off. I can see myself (and probably others) running down lots of batteries with the way the GPS power is programmed.
Again, leave it on when the camera is "asleep" but when the power switch is set to OFF, everything should be off. Just my opinion as a long time user of Canon cameras, various GPS modules and programmer.
I should also mention, other than that, I'm LOVING this upgrade from my 7D.

Good luck, but it won't happen.
See here: http://forums.usa.canon.com/t5/EOS/6D-GPS-Drains-battery-when-idle/m-p/13439#U13439
51 reply and more than 8500 view, nothing. nada, zip.
Weekend Travelers Blog | Eastern Sierra Fall Color Guide

Similar Messages

After Update Trigger not triggering for first update

Hi All,
I have written a Trigger on AP_SUPPLIERS table to update AP_SUPPLIER_SITES_ALL when payment priority gets updated on AP_SUPPLIERS table. Trigger calls a pragma autonomous procedure after update happens, and updates sites table. We are on R12 (12.1.3) with DB 11.2.0.3.0
Somehow this is not working for the first update, after that for every update it is working. Any idea why this might be happening?
Trigger Code:
CREATE OR REPLACE TRIGGER XX_AP_SUPPLIER_SIT_UPD_SYNC
AFTER UPDATE
ON AP.AP_SUPPLIERS
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
DECLARE
l_vendor_id     NUMBER;
l_paym_priority NUMBER;
BEGIN
   XX_AP_SUPSITE_UPDATE(:NEW.PAYMENT_PRIORITY, :NEW.VENDOR_ID);
   EXCEPTION
     WHEN OTHERS THEN
       RAISE;
END XX_AP_SUPPLIER_SIT_UPD_SYNC;
Procedure Code:
CREATE OR REPLACE PROCEDURE APPS.XX_AP_SUPSITE_UPDATE (p_payment_priority IN NUMBER,p_vendor_id IN NUMBER) AS
PRAGMA AUTONOMOUS_TRANSACTION;
ex_custom EXCEPTION;
PRAGMA EXCEPTION_INIT( ex_custom, -20001 );
BEGIN
UPDATE AP_SUPPLIER_SITES_ALL
SET PAYMENT_PRIORITY =p_payment_priority
WHERE VENDOR_ID = p_vendor_id;
COMMIT;
EXCEPTION
WHEN OTHERS THEN
    raise_application_error( -20001, 'Error while updating payment priority on Site '||SQLERRM );
END XX_AP_SUPSITE_UPDATE;

Thanks for your replies Saubhik/VT,
now my trigger is compiled. but is not triggering. pl help me to resolve .....
create or replace
TRIGGER AUDIT_DEV.trg2
AFTER DELETE OR UPDATE OF EMP_STATUS ON AUDIT_DEV.AUDIT_PERSONS
FOR EACH ROW
declare
OSUSER varchar2(30);
     MACHINE varchar2(30);
     logon_time date;
db_user varchar2(30);
USERNAME VARCHAR2(30);
EMP_USER_MODIFIED AUDIT_PERSONS.EMP_USER_MODIFIED%TYPE;
     EMP_DATE_MODIFIED AUDIT_PERSONS.EMP_DATE_MODIFIED%TYPE;
     EMP_SK AUDIT_PERSONS.EMP_SK%TYPE;
     EMP_ID AUDIT_PERSONS.EMP_ID%TYPE;
     EMP_NAME AUDIT_PERSONS.EMP_NAME%TYPE;
EMP_RESIGNATION_DATE AUDIT_PERSONS.EMP_RESIGNATION_DATE%TYPE;
BEGIN
select     username,osuser,machine,logon_time into db_user,osuser,machine,logon_time from v$session where sid=(select sid from v$mystat where rownum=1);
INSERT INTO AUDIT_DEV.AUDIT_PERSONS_LOG (EMP_USER_MODIFIED,EMP_DATE_MODIFIED,EMP_SK,EMP_ID,EMP_NAME,EMP_RESIGNATION_DATE,EMP_STATUS_OLD,EMP_STATUS_NEW,osuser,db_user,machine)
VALUES(EMP_USER_MODIFIED,EMP_DATE_MODIFIED,EMP_SK,EMP_ID,EMP_NAME,EMP_RESIGNATION_DATE,:old.EMP_status,:new.EMP_status,osuser,db_user,machine );
COMMIT;
END;
09:59:06 AUDIT_DEV@dev>UPDATE AUDIT_DEV.AUDIT_PERSONS SET EMP_STATUS='TEST' WHERE EMP_ID='4234';
EMP_STATUS
TEST
1 row selected.
Elapsed: 00:00:00.01
10:00:03 AUDIT_DEV@dev>commit;
Commit complete.
Elapsed: 00:00:00.01
10:00:17 AUDIT_DEV@dev>select * from AUDIT_persons_log;
no rows selected
Elapsed: 00:00:00.00
10:00:17 AUDIT_DEV@dev>
Edited by: Abk on Nov 4, 2010 10:42 AM

HT1386 when i click on check for update, the iTunes wants me to provide me a file or something from my computer, instead, it should check and suggest for an update

when i click on check for update, the iTunes wants me to provide me a file or something from my computer, instead, it should check and suggest for an update

Demo,
I'm not sure how I'm supposed to do that the instruction says since i am not familiar with Apple at all what are quick links even? Am i supposed to do this on Itunes on my Ipad or on the computer?
this was that reply you mentioned.
I spoke with Apple Tech Support and they guided me through this. I was trying to get the App Store working on a new iPad mini using a new, but existing Apple ID. To get it to work, I had to go onto iTunes on my main computer (not on the iPad). I had been trying to use the Sign In button, and I was having the issue of being "forced" to enter a credit card, which I did not want to do. Here was the solution I was given, which worked for me.
Log out of iTunes, if you are not already. (Or hit Cancel if you're on the Review Payment screen.)
Instead of going into Sign In, go to Redeem under the Quick Links, on the right-hand side, down a bit.
Go through the screens, accepting the EULA, etc. You will get to a Review Payment screen, similar to the one you saw before, but it will have a None button.
You can enter an iTunes card here if you want, but I was able to leave that field blank and still successfully get the account set up, ready to use on the iPad.

Need suggestion for Column update in query results

While generating reports using Oracle 10g SQL Query, we need to update the few of columns data with business calculations. We are processing large amount of data. Kindly suggest us, for the best method to achieve this.

i don't know about Oracle 10 SQL Query but i wouldn't mix reporting with data calcuations which is stored persistent in the database. I would separate them, e.g. you could create a database-job to execute your updates at a specific time each day.
hope this helps

N9 suggestions for future update

1. enable all hardware is in n9 like fm radio, transmiter, video call. and all other iI dont know.
2. fix buges with gps, email and mms, swype(if iI choose suggested word, it wrotes two words first i swiped and second i choose.), browser (enable to download all type of files), make able to seperare contacts from different accaunts.
3. add more shortcuts like 8icons, or icons from all swypes not only from down to up, add landscape for whole ui( and make able to edit it without third party programs).
thats all from me right now.
Nokia Please Help N9 live!
Please Fix:
Browser Downloads
Video Call
Voice Deal
Fm Radio

give us a synchronization software that really works.
Read http://betalabs.nokia.com/apps/nokia-suite-3-2-beta/suggestion/42076/n9-support
here is how they respond to our requests now.
"there's no such plan. Nokia Link is targeted for Nokia N9 users. As you've seen from comments by Pia, for Nokia N9 decision was to use new, lightweight desktop sideloading product."
and how we thought,
"With the very limited functionality (lightweight?) of Nokia Link it is completely against that what customers want. We bought a high quality device which works quite well OTA but which is almost worthless when a company does not allow synchronizing an Exchange server due to security concerns.
I think Nokia does everything to prevent the N9 to become a very successful phone which sells better than all the announced and published WP **bleep**. This decision which was taken by someone to provide Nokia Link as the only connectivity software for the N9 is absolutely not customer oriented. Nokia was known to produce high quality innovative phones. Unfortunately this time is over."

Is there anywhere that Apple takes suggestions for iOS updates?

I have an idea that I think everyone can appreciate.
I would like to see them add a dictionary-type feature to the settings for the auto-correct function, so people can directly add words to the dictionary and have the ability to control which words are auto-corrected. Just like you would find in Microsoft Word.

Looks like wjosten gets the first prize!

Suggestions for story updates

I have two recurring issues that I think could bb addressed in subsequent updates.
1. Why can't the formatting of text (double spaced, add space after paragraph) be applied throughout the document as a preset? It is laborious to go to every paragraph and add space after paragraph. Nor does it work in a 'select all, apply to all' mode. We need to be able to apply these formatting decisions uniformly, not manually.
2. Bookmarking current, or left off, working position, or selected places. When you're working on a long document, it is laborious to have to scan through the work to reach current working position.

Say you're working on a treatment page, normal document, and you want the document to be double spaced throughout. Also, you want an added space after each paragraph.
Your text format toolbar provides these applications.
But they don't work as expected (at least, not as I expect them to).
You can select all text in the document and apply the double spacing. That works at that level. But when you go to work on a new paragraph, the new paragraph reverts to single spacing.
You can't select all text in the document and apply 'add text after paragraph'. If you try, it applies only to the first paragraph. Which means you have to apply the style from each paragraph in the document.
But it would be far more effective if you select your style before you start a document: double space, add space after paragraph, and it applies throughout as you work. You cannot do this.
Each time you come back to the document, you have to continue to apply the styles manually, and in the case of space after paragraph, to each paragraph.
It wastes a lot of time.

A suggestion for new update

i'm sorry for my bad english.
i think a new option is needed.
i want my ipod to keep the backlight on automatically during charging or connected to car-stereo system.
i'm afraid you can't understand my english. hahaha~

Yes, the setting is there to leave the backlight on all the time, but what would be nice is to have the iPod know that it is connected to an external power source (not running on battery) and have the backlight on, but NOT have the backlight on when running on the battery.

Everytime i update the software a thunderbolt firmware update 1.0 appears. i install the updates and whenever i check for new updates the same firmware update appears again...does anyone else have the same problem?

does anyone else have the same problem??

I did! Just make sure when you're updating, to be connected to power!

Is there a suggestion for new updates for Aperture, Is there a suggestion for new updates for Aperture

Need to upgrade an option so photos can be sent straight to tumblr

You mean something like this
http://penck.de/aperture2tumblr/

A Suggestion for next update

I was thinking the other day; would it be possible to add the feature to add iTunes gift cards on the apple tv, with the use of bluetooth keyboard, would really like to see this feature added to make my apple tv more awesome

This isn't a user to apple forum, it's a user to user forum. To tell apple about things like new features you would like to see go to apple.com/feedback

Suggestion for future update

Assuming I can upgrade to ST 2.0 at some point without losing my custom icons... I just read about a tool called Speed Launch that essentially you give it the programs you need to open all at once, and then one click opens them all. I have several tasks that I open 5 or six things to do, and a single Simple Tap button that I could build to open all of them at once would be incredibly useful. -Michele

You can do that today by writing a .bat file and then pointing SimpleTap to it. I have attached a sample .bat file that opens notepad and calculator - but you could modify it to do anything you want. Then, using SimpleTap 2.0:
1. Click the "+" to create a new tile
2. Choose "launch a program"
3. Browse to the .bat file
Attachments:
sample_bat.zip ‏1 KB

Sensible suggestions for ipod touch firmware

Not sure where to post but please note my suggestions for development of ipod touch firmware/native apps as follows:
1: on-the-go playlists. Please add the VERTCAL ALPHABETIC MENU when scrolling for tracks to add to the on-the-go playlist.
2: Mail, Notes & Contact apps should be available in LANDSCAPE mode as touch keyboard is by definition larger and more manageable.
Cheers

You can send feedback/feature requests directly to Apple at this link: Apple Product Feedback

IWEB SUGGESTIONS FOR APPLE

First, if Apple actually takes the time to read these Discussions, let me say, "Thanks!" I love Apple.
Second, I don't claim to be an expert, nor do I consider myself a uber-geek with incredible technical prowess.
I've just been playing around with iWeb, and have some suggestions for future updates, another 'Wish List' if you will;
1. The improvements to iPhoto are numerous and impressive, but iPhoto could use just a more photo tweaking in the realm of jpeg sizing. This would help integrate it with many iLife apps, especially iWeb.
2. GarageBand, likewise, also keeps getting better and better, but it too could use a little boost in the way it deals with file size and the overall affect on one's system. Just having the old 'go to GarageBand Help' popup gets a little frustrating. Optimizing should be more directly accessible in the user interface.
3. Creating easy access to, and integration of third party 'add ons' would be a really great way to deal with the current iWeb blogging limitations. Just as with many other blog systems, users could choose which various plug in enhancements they want on their iWeb blog.
If Apple made blog plug-ins easy to do, everybody would win. As with FireFox, for example, a community of iWeb enthusiasts could help develop and build iWeb into a super powerful app, via such user chosen add ons. Perhaps iWeb could be 'opened' up just a bit more, to let some more community light shine in?
That's just my two cents.
Feel free to correct me if I'm wrong or just plain crazy, or post your own suggestions.
Thanks.
iMac G5 Mac OS X (10.4.4) iBook, Airport, Original iPod, Bondi Blue, what about you?

Make sure you send your iWeb comments directed at Apple to them via the iWeb > Provide iWeb Feedback menu item. Ideas for Garage Band and iPhoto are better posted in the forums and feedback channels devoted to those programs than here.

New board for Software Updates - read this first!

Dear Nokia Support Discussions members,
we are happy to introduce this new section for discussing Nokia phone software updates with your PC or over-the-air.
Please use this board to discuss
- Nokia Software Updater PC application or over-the-air updates
- latest software versions for each product
- any changes you notice over previous software versions
- making a back-up of your phone data
- problems you may encounter with the update
etc.
First and foremost, Nokia Support Discussions is a meeting place for Nokia product owners. Here you can discuss Nokia products, ask for assistance and help other people by providing solutions. Nokia Moderators are here mainly to give assistance in using the boards and to keep the discussions on track.
However, these boards are also a feedback channel to Nokia and people from many different Nokia departments actively follow these discussions. Constructive feedback and criticism is valued and always welcome.
We at Nokia Support Discussions do not have any information about when new products are added to the update service - nor do Nokia contact centers. So you just need to keep checking the service webpage or the boards here. I am sure new products are announced here by our alert members within minutes after they have been added.
I wish to remind the community that posting any confidential information about Nokia product software versions will be deleted and may result in a permanent ban without warning.
Below is the introductory letter that we received from the Nokia Software Update Team - please read it for important information about new products and their schedule.
See you on the boards,
vandelay & Nokia Support Discussions Team
The Nokia Software Updater is a Windows application that enables you to update Nokia mobile device software (firmware) over the Internet using your PC. The application can be downloaded from the Nokia UK Product Support Internet pages at
www.nokia.co.uk/softwareupdate
The Nokia Software Updater offers the same updates you would receive at a Nokia Service Centre. The added advantage is the convenience, as you can now easily perform the update yourself from any location with an Internet connection, at a time suitable for you. Keep your phone software up-to-date, or fix a potential operation problem you may have by regularly updating your phone firmware.
In the future, every new S60 product will be compatible with the Nokia Software Updater, but at the moment the application is only available for selected Nokia devices including Nokia 6630, Nokia 6680, Nokia 6681, Nokia 6682, Nokia N70 and Nokia N72. During the autumn, the application will be available in different languages on different web pages and many other products will also be available for software updates.
The Nokia Software Updater has been made to be as customer-friendly as possible. All you need is a PC and the standard sales-pack data cable - no dongles, no adaptors, no fuss. A typical update takes around 30 minutes. Plus, you don’t need to wait for your device to be returned from Nokia Service Centre.
Regards,
Nokia Software Update Team
(letter dated August 21st, 2006)Message Edited by vandelay on 12-Oct-2006
09:12 AM
Message Edited by vandelay on 30-Oct-2007 02:11 PM
I wrote all my posts from 2005-2011 as an "Admin" for this community. I still work for Nokia as an external consultant, so my rank in all posts is now "Employee".

Read the comment!

Suggestion for First update to 7dMii firmware :)

Similar Messages

Maybe you are looking for