Suggestion for future release

Where should I post suggestions for future releases of SQL Developer or/and Data Modeler?
Please give me a link.
Thanx,
Chris
One suggestion for Data Modeler:
In the "Model Properties" of a relational model, there should be a "scripts" folder like in the "Table Properties".
In this script I'd like to generate some global statements for the DDL generation,
for example:
before (=begin of generated script): set define off; alter session set nls_numeric_characters='.,'; nls-config
after (=end of generated script): commit; (when table inserts are used and no ddl-statement is following; otherwise you have to use 'commit' in each table-script; After the last table create (ddl-) statement there is no implicit 'commit')
I know, that I can edit the generated script to add my statements, but if you often generate code there is a good change to forget to change the script afterwards.

Hi,
You can submit any feature requests at Oracle SQL Developer Exchange - https://apex.oracle.com/pls/apex/f?p=43135:1:2266866887402592:::::

Similar Messages

Your "suggestions for future features" is broken??!!

I really just wanted to leave you a suggestion for future features. Your system took me to a page that said i needed to be on the most recent version but alas I am! You even tell me so when I go to firefox.com! Hmmmm...... a little problem there.
Regardless, here is the feature suggestion i wish to make:
You've done a fine job of cleaning up the top bar in 4.0 to make the most of new widescreen displays so that we have more space for the page content vs. the browser stuff. The deal is, virtually all sites still use only about a third of the page width leaving tons of wasted space on a full screen view. Why don't you offer a way to move all the browser navigation, tabs, and tools wherever i prefer - like running vertically down the left or right side of the massively empty pages i see on my 24" monitor and even my little 11" laptop monitor?

You can leave your feedback/suggestion at this link: Apple Product Feedback

MDG Road Map for future release

Can any one share the link for MDG Road map for future release. I am looking specifically at the enhancements for data domains.

thank you for the answer!
next year we plan to migrate our databases from 10g to 11g R2.
the reason for R2 is that the second realease is a more stable version.
best wishes,
georg promok

Suggestion for future firmware release

Hi, I'm proud to be a possessor of an AirPort Extreme and I would reccomend some useful deficiencies for future firmware update.
The ability to specify DNS1 and DNS2 for DHCP Client (I don't want that AirPort resolve itself)
The ability to quickly turn off and on wireless for health and green respect.
I'm thinking at a small application that doesn't restart AirPort but only turn off and on wireless and wired host continue to work.
Obviously AirPort Extreme doesn't have any hardware button to turn off wireless, but this could be a great thing for future models of AirPort...
Best regards!

Why not let Apple know directly about your suggestions?
AirPort Extreme Feedback

Scanner Suggestions for future support

Maybe I'm asking for the world, but I'm on my third scanner in the last 6 years. Does anyone have a suggestion for a scanner manufacturer, or price range, where I might be able to count on future support of drivers as the new OS releases come out? I have used the workarounds (VueScan), but I'd really just like to think in advance that I am buying a product that will be supported 2 years from now.

Took no action.

Hi need good suggestion for future

hi experts,
i need good suggestion for my future _
i have 3 + exp as a ABAP consultant,
i am looking for a change, i wish to add some thing to ABAP? but, i couldn't understand what to do? pls help me in this regard..
my skills are : very good in ABAP
vey weak in OOPS.
waiting for good advice
thanks in advance

the future will depends on the OOPS only . for all the companies started working on OOPS only they are upgrading to the oops from the general abap...be aware of that ..
it is better to learn XI or HRABAP it is good for you i think.

Wish List for Future Releases of FME

First, I want to sincerely thank the Adobe team responsible
for FME. Great job! Great application!
We use FMS for 24/7 live cams and live TV streams. We have
some suggestions for what might help FME be a more flexible tool
for us and others in our situation.
- option to automatically connect and start broadcasting upon
application startup
- option to automatically load a saved profile upon
application startup
- reconnect feature should keep trying to reconnect/broadcast
every 60 seconds or so instead of trying only once
(When stream is improperly disconnected... temporary loss of
internet, for example... and the encoder tries to reconnect and
publish, you get a bad name - already in use - if the instance
hasn't cleared yet. Then a window pops up and the encoder quits
trying to publish. This modification would be extremely helpful to
those who cannot monitor the encoder every second... or in a 24/7
live cam setup)
- option to hide rtmp string from prying eyes
- password protect access to settings (to prevent someone
from changing them without authorization)
- make FME recognize a firewire connection as an audio source
in addition to video source (when using a camcorder, for example)
Thanks again and looking forward to reading others' ideas and
suggestions as well.

You might accedently move the player and change the volume while you are walking or doing stuff of undisputed interist. The next firmware should include a special code which u must tap in order (like the buttons-tap then in a specific order). If you get it wrong the player freezes and formats the hardri've so that any data on it cannot be stolen. This should be great to prevent theifs. This is what Windows Xp's sp3 will do...i bet u million dollars.

Suggestion for future Archlinux Releases.

Hello everybody,
today I read the release announcement of Archlinux 2007.08 on distrowatch.com. See http://distrowatch.com/4394.
I registered immediatelly the Archlinux forum only because I wanted to tell the releasers / developers of Archlinux this here:
Please dont use single quotes "\'" in any of your file names, especially not in the release ISOs.
I use Linux (Gentoo at DesktopPC, Ubuntu at Laptop and Fedora at Work-Laptop) for a very long time and know many Unix-like-OS enthusiasts - friends, relatives and collegues. It's shocking to see that someone from within the Linux/Unix-fraction (and Archlinux belongs to this group) is using one of the most forbidden characters, if not the THE single most taboo'rized character, a Unix-like system could ever face in it's filenames.
The last time I remember I had a single quote filename file on my harddisk was from a legally rather questionable source from P2P networks,
uploaded by one of those MSDOS-Era release groups which include MSDOS-Codepage encoded NFO files, artful ASCII-Magic-on-Dope filenames and other horrible things not to be mentioned here. (There might be women and children around...)
What happend there?
Who is responsible for this and why hasnt he been banned of the dev-team, yet?
Why do you think was it legitimate or even necesarry(?!) to include a single quote in the ISO name?
Please dont get me wrong, Im not as mad as I may sound.
Also, Im not just kidding. Yes, there may be little humor in here,
but the core question is definetely understandable, IMHO.
I'd really like to hear a reasonable and serious answer.
Bye,
Tobi.

juergen wrote:
tobiasbeil wrote:
Hello everybody,
I use Linux (Gentoo at DesktopPC, Ubuntu at Laptop and Fedora at Work-Laptop) for a very long time and know many Unix-like-OS enthusiasts - friends, relatives and collegues. It's shocking to see that someone from within the Linux/Unix-fraction (and Archlinux belongs to this group) is using one of the most forbidden characters, if not the THE single most taboo'rized character, a Unix-like system could ever face in it's filenames.
"'" is a valid filename character. The only invalid character is the "\0".
Jürgen
Im not too sure about this. As far as I am concerned, most Unix Systems allow any Character except a Slash "/" in their filenames.
But it would be interesting to underline (or correct/falsify) this with a link to an official document, wouldnt it?
EDIT: come to think of it, maybe both is correct: \0 and "/" are not allowed. \0 because of the underlaying C programming (more precisely the String representation in C) and "/" because of the logical separation. However, I'd still welcome an official reference to this.
Last edited by tobiasbeil (2007-08-06 16:02:43)

SAP PI Roadmap for future release

Hi,
Can anybody give some idea/link about SAP PI roadmap for next 2-3 years.
Regards,

HI,
As you might be knowing current SAP PI release is of PI 7.1.
now as per my understanding there will be SAP Enhancement Packages in future instead of new releases.
SAP had introduced the enhancment package strategy.
Please refer below links
Overview SAP Enhancement Packages
https://www.sdn.sap.com/irj/scn/wiki?path=/display/ehp/overview%252bsap%252benhancement%252bpackages
enhancement package strategy
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50b84668-3e61-2b10-9db9-9f45dd9bd361
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/bpx-community/enterprise-resource-planning/enhancement%20packages/using%20sap%20enhancement%20packages%20for%20sap%20erp.pdf
Thanks
Swarup
Edited by: Swarup Sawant on Dec 29, 2008 8:10 AM

EA6900 Update and Two Suggestions for Future Firmware "Nice to Haves"

Hey, first off, I've been a user of Linksys Routers for many years now, so I am familiar with the different settings and other selections that you generally see on the firmware pages. As to the EA6900, I am very, very PLEASED with how this router initially set up, along with the different pages in it's firmware. With the one exception noted below, the pages and the various settings "flow" very well. This baby is up and kickin and the house is literally dripping in both 2.4 and 5 GHz RF. The DHCP Reservation and MAC Wireless Filtering Tables worked without a hitch. The setup for FTP and NAS was simple! BTW, the setup for FTP shares is far easier than what we had to do using the EA3000 firmware. Kudos there! I am using the router associated with a server that is hosting about 25 different wired devices throughout the house, with a Cisco SG-200-08 Smart Switch behind the router for the LAN, which is load balancing on a Teamed (2 NIC'S) 2GB Adapter . The router grabbed Comcast's Native IPv6 and set that up flawlessly. Here is the information on how all that went (read from the bottom up): http://www.dslreports.com/forum/r28693387-IPv6-Dumb-Questions-About-My-IPv6-Goat-Roped-Hookup Information on how the netwrk worked in Teaming and LAG mode is here: https://supportforums.cisco.com/message/4071888#4071888
OK:, So, Mr. Linksys Firmware Developer, whoever and wherever you are, I have two suggestions on the user GUI that would make everyone's life a little easier next time the firmware is updated:
1. Please make it so numbers, particularly MAC and IPv6 numbers, can be copied and then pasted to another place in the firmware. For example, in the Information tab of the Device Settings section, I should be able to copy MAC and IP numbers and then be able to paste them, say, in the DHCP Reservation Table. Other Linksys device firmware allowed for this.
2. For goodness sakes, PLEASE don't nest the Diagnostics tab under the Troubleshooting group. It drives me nuts to think that getting the router's status, to ping or traceroute, or to do a firmware backup would be found in "Troubleshooting". Suggest that all y'all just remove the Diagnostics tab to the far left side of the application and have that item as its own stand-alone group!
Then I will be most happy. As if it really matters, BUT I wanted to give all y'all my perspective from a user way down in the day-to-day weeds. A most happy Boy otherwise.
Crazy Jumpin jack
Marietta, GA
Crazy Jumpin Jack (Gregory)

Hi Crazy Jack,
We'll get the Team into your suggestions and commendations. Appreciate the feedback. We hope to see you help out in the Community as well.
Regards,
24JUAN80
Linksys Support Community Moderator
The Search Function is your friend.... and Google too.
How to Secure your Network
How to Upgrade Routers Firmware
Setting-Up a Router with DSL Internet Service
Setting-Up a Router with Cable Internet Service
How to Hard Reset or 30/30/30 your Router

Suggestion for next release of TM

Hi
I hope Apple takes up this suggestion or someone tells me I have been doing something wrong.
I have a 250GB external hard drive which I use for storing movies I make. I want to allocate half my 250GB to TM. I don't want to reformat my external drive with its current moves and set up 2 partitions.
It would be nice if in System Preferences one had the capability to allocate a % of the external drive to TM.
Hopefully fixed in next update.
Regards

I don't think you really understood my post.
To do such a thing would be to put your data in danger.
As TM changes how the file system (the thing which keeps track of your files and so on) works it would be unsafe to promote such a behavior you wish for. And by giving the option to set a limit on how much space TM may use on a partition Apple would in some way promote this dangerous setup.
But on the other hand such a thing could be useful if you were to have several computers with TM to use the same partition.
My point is that Apple will probably not implement your request as it would be more dangerous than helping, in most of the cases were it would be used.

Product suggestion for future iTunes

I can't find where to send a product suggestion to Apple.
When listening to "live" albums (i.e. Oscar Peterson's "A Night in Vienna" or Eric Clapton's "Unplugged" etc...any album that's been recorded with applause between tracks)...the applause is often annoyingly loud. It would be great to be able to designate tracks as "recorded live" and have iTunes automatically reduce the playback volume for the applause. I realize this might be a challenge to get iTunes to recognize the applause vs. the music, but...that's my suggestion. This would be different than 'Sound Check' in that it would fade out (reduce volume/levels) for the applause only...not the entire track.
G5, iBook G4, G4, and a trusty old 7200/90 Mac OS X (10.4.9)

I don't know how this would be done either, but I would imagine...
• it wouldn't be fool-proof (what is?)
• I think that most applause has some common audio attributes. If a song is checked by the user to make use of a "live applause filter", for example, it would 'listen' to the beginning/end of a track and match the audio against a filter of common applause audio attributes, and appropriately fade/reduce volume if there's a good filter match.
• program it to only allow the fade at the beginning/end of tracks--mid-song applause would remain as-is. I would think that should be easy enough.
• perhaps the program could 'learn' intuitively or be 'taught' by the user the applause attributes of each song ... for example: such-and-such song has an applause fade 0:06 into the beginning and 3:50 - 4:15 at the end. iTunes attempts automatic detection, then allows the user to 'tweak' what it came up with.
Just ideas. I have no idea about what I'm talking about...I know nothing about audio, programming, or much else...just a user with an idea for this.

Suggestion for Next Release - Dynamic Column Widths

Is it possible for the next release of xcelsius to allow the developer to dynamically set column widths?
Appearance > Layout > Custom Column Widths - let the developer bind the values dynamically to a range.
Thanks.

The XScorecard (part of the XComponents @ www.antivia.com which are free to download and free to use) does exactly this. In fact it does a little more because the column widths bind in both directions, which is useful to sync two tables together. If they are bound to the same column width cells then even if the end-user drags the columns in one table the second on changes as well. If there are things that the XScorecard does not do which you need it to then leave a comment and I will see how difficult it would be to add.

Suggestion for future Match upgrade -- add a "force upload" function

I've been using the Match service since it went GA, last month. I have a lot of CD rips, but also some vinyl needledrops and different masterings (i.e. The Beatles in Mono) which the Match functionality really has trouble with. In the case of the Beatles Mono, it might upload some tracks but "match" others. So my Beatles album ends up becoming half mono / half stereo in iCloud.
This is undestandable given the technology being used, but is still very frustrating. So my suggestion to Apple developers is to create an "force upload" function to their Cloud service, with the next Match revision. This doesn't need to be enabled by default, but make part of the dropdown for a song or album to alow the user to use their specific local version, if the Match process doesn't work to their satisfaction.
What do you think? Good idea or waste of developer resources? I've already called Apple support with this suggestion, but I'm assuming that they are hesitant as it might give users the ability to eat up a ton of storage space on Apple's end, if it's abused.

The idea has merit, though a reluctance on Apple's part to implement, as you pointed out, might be argued based on additional server commitment. However, my guess is that as the matching process improves (crossing my fingers here), the storage requirement for the same number of users would go down, not up. We read a lot more from people who want the songs to match for one reason or another than want the ability to eat up hours uploading. I suppose Apple could put some hard limit on how much could be uploaded without the user paying more, if it really came to that.
On another subject, while you've gone through pieces of it in other posts, I would like a chance to pick your brain regarding your Audacity workflow, i.e. turntable/cartridge used, phono stage/preamp, A/D converter - well the whole ball of wax. I've learned what I know through reading and by applying what I learned in radio & TV studios eons ago, so I'm sure having a dialogue with an actual human who's had better success than I in getting vinyl to match would be very helpful.
Because until I read some of your postings, I was under the assumption my limited success was better than what most were achieving, I detailed my process here.
https://discussions.apple.com/message/16838585#16838585

N9 suggestions for future update

1. enable all hardware is in n9 like fm radio, transmiter, video call. and all other iI dont know.
2. fix buges with gps, email and mms, swype(if iI choose suggested word, it wrotes two words first i swiped and second i choose.), browser (enable to download all type of files), make able to seperare contacts from different accaunts.
3. add more shortcuts like 8icons, or icons from all swypes not only from down to up, add landscape for whole ui( and make able to edit it without third party programs).
thats all from me right now.
Nokia Please Help N9 live!
Please Fix:
Browser Downloads
Video Call
Voice Deal
Fm Radio

give us a synchronization software that really works.
Read http://betalabs.nokia.com/apps/nokia-suite-3-2-beta/suggestion/42076/n9-support
here is how they respond to our requests now.
"there's no such plan. Nokia Link is targeted for Nokia N9 users. As you've seen from comments by Pia, for Nokia N9 decision was to use new, lightweight desktop sideloading product."
and how we thought,
"With the very limited functionality (lightweight?) of Nokia Link it is completely against that what customers want. We bought a high quality device which works quite well OTA but which is almost worthless when a company does not allow synchronizing an Exchange server due to security concerns.
I think Nokia does everything to prevent the N9 to become a very successful phone which sells better than all the announced and published WP **bleep**. This decision which was taken by someone to provide Nokia Link as the only connectivity software for the N9 is absolutely not customer oriented. Nokia was known to produce high quality innovative phones. Unfortunately this time is over."

Suggestion for future release

Similar Messages

Maybe you are looking for