Suggestion for installing 11gr2 crs with existing 10g crs...

Hi, I need suggestions on installing 1120 rac on suse 11 where already 10g rac with asm is running. I need to upgrade the 10g crs and asm while installing 11g crs. Pls share your experience on these
1- what are the challenges to run 10g database on 11gr2 crs? is this suggested?
2- challenges to upgrade asm and crs to 11gr2.
3- can we use 2 asm instance in 11g grid infra to manage 10g and 11g db separately.
4-what could be back strategy for this kind of setup? RMAN?
5-how many extra ip i need to install 11g crs with existing 10g crs . we plan to use 3 ip for scan.
Also if possible please share any doc for this kind upgrade
Thanks,
Abhai

1.) Yes this is o.k. Just see this MoS Note:
Pre 11.2 Database Issues in 11gR2 Grid Infrastructure Environment (Doc ID 948456.1)
2.) Well first only clusterware is upgraded. You will be asked if you want to upgrad ASM, but this is not mandatory at first.
You can use ASMCA later to switch ASM from 10.2 to 11.2 (this does not have to be done during upgrade).
3.) No you can only have 1 ASM running. So it is either 11.2 or 10.2 ASM. (However I suggest 11.2).
However you can/should have multiple diskgroups. One data and fra for the 11.2 databases where you set the rdbms.compatibility to 11.2 to use the new features, and one data an fra diskgroup for the 10.2 databases.
4.) As long as the compatibility setting of a diskgroup isn't changed, you can always switch ASM back to use 10.2 executables. (Just do a srvctl remove asm and add ASM).
Search this forum - there has been another thread about this.
Regarding fallback of clusterware => See installation guide.
5.) Mandatory are just 3 additional IPs for the SCAN.
Upgrade documentation see the installation guide of 11.2 GI.
Upgrade for ASM see Storage Admin Guide.
Upgrade to move OCR and Vote to ASM see Clusterware Admin Guide.
Upgrade to database see Database Upgrade Guide
Additionally look in MoS for the Upgrade Companion.
Sebastian

Similar Messages

Docs for install BPEL PM with 9i/10g RDBMS

Hi all,
Where can I find documents for install BPEL PM 10.1.2.0 Beta with 10g database?
Thanks

Found it.
Thanks.

11i eBiz RAC 9i database cloning to a envronment with existing 10g CRS

production is 9.2.0.8 RAC Need to clone production to lower instance using Rapid Clone. Has done such clone before.
The new issue is there is an another 10g RAC database with 10g Clusterware has been installed in this server and the cloned 9i RAC need to co-exist with this 10g RAC database.
I am thinking to use 10g clusterware to manager 9i RAC database.
From cloning point of view, how to clone a 9i RAC database to an environment with 10g clusterare.
Should I use 9i oracle home 9.2.0/appsutil/clone/bin/adcfgclone.pl or should I use 10g oracle home adcfgclone.pl?

Hi,
production is 9.2.0.8 RAC Need to clone production to lower instance using Rapid Clone. Has done such clone before.I did not try this type of clone before. However, I believe you cannot use 10g ORACLE_HOME as cloning 11i instance with Rapid Clone on 10g database requires additional manual steps which cannot be applied to the 9i ORACLE_HOME. From Rapid Clone point of view, I believe you need to issue adcfgclone.pl from the 9i ORACLE_HOME
Note: 783188.1 - Certified RAC Scenarios for E-Business Suite Cloning
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=783188.1
Regards,
Hussein

Need suggestions for a new printer with OS 10.9.5

I have a 2010 HP 6500 A Plus printer that has worked well with my iMac circa 2010. Printer is not feeding paper. It won't scan. Are there suggestions for a new compatible printer for OS 10.9.5.?

Hey Debbisita,
Thanks for the question. It sounds like you are experiencing issues with your Printer and OS X. Before opting to purchase a new printer, you can try these troubleshooting steps to completely isolate the issue:
Troubleshooting printer issues in OS X - Apple Support
http://support.apple.com/ts3147
Follow these steps until the issue is addressed:
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Thanks,
Matt M.

Install XML Publisher with iAS 10g

Hello,
Can we install/integrate XML Publisher with iAS 10g (10.1.2) and how can we integrate published reports with it.
We don't have SSO,OID
Regards

When you say integrate, do you mean you want to install XMLP on top of it or you want to report data from it?
Tim

Suggestions for Apple in dealing with icloud outages

The ongoing outage of icloud mail service to many of us, two days and counting as of Sept 12, 2012, prompts me to make some constructive suggestions for Apple.
Apple should find ways of letting customers know whether customer inability to access their icloud mail is something the customer can fix or whether it is a problem only Apple can fix.
As a starter, the popup windows that users see when icloud mail is unavailable should direct them to the web site where system status of icloud mail is shown, namely
http://www.apple.com/support/icloud/systemstatus/
Customers will be less likely to exhibit anger toward Apple if they are given some real information about why icloud mail is unavailable. This can be put on the system status web page above.
The staff on the floor at Apple Stores should know, and be willing to tell customers, that when their own ipads are having difficulty communicating because of a server problem, that this may also affect the service to customers.
Apple should consider gathering from clients of icloud mail some alternative email accounts that could be used to notify clients of outages.
Apple should acknowledge that people do rely on their icloud services and should find ways of using backup servers, much as hospitals have backup generators to supply electricity when municipal sources fail.

The ongoing outage of icloud mail service to many of us, two days and counting as of Sept 12, 2012, prompts me to make some constructive suggestions for Apple.
Apple should find ways of letting customers know whether customer inability to access their icloud mail is something the customer can fix or whether it is a problem only Apple can fix.
As a starter, the popup windows that users see when icloud mail is unavailable should direct them to the web site where system status of icloud mail is shown, namely
http://www.apple.com/support/icloud/systemstatus/
Customers will be less likely to exhibit anger toward Apple if they are given some real information about why icloud mail is unavailable. This can be put on the system status web page above.
The staff on the floor at Apple Stores should know, and be willing to tell customers, that when their own ipads are having difficulty communicating because of a server problem, that this may also affect the service to customers.
Apple should consider gathering from clients of icloud mail some alternative email accounts that could be used to notify clients of outages.
Apple should acknowledge that people do rely on their icloud services and should find ways of using backup servers, much as hospitals have backup generators to supply electricity when municipal sources fail.

Need to steps for install appex 4.1 in 10g R12 linux 32bit

Hi Experts,
Please provide steps to install appex4.1 in oracle 10g R12 linux 32bit platform
Regards,
Vicky

Hi Experts,
Please provide steps to install appex4.1 in oracle 10g R12 linux 32bit platform
Regards,
Vicky

Installing Grid control with existing IAS

Is it possible (and how) to install Grid control into existing Application Server installation? Or integrate it somehow?

yes u can install Grid control into existing Application Server installation

Need suggestions for install Solaris10 on IBM R52

Hi all,
I am trying to install Solaris 10 on my IBM R52 laptop, most of the hardwares looks working, except sound card and wireless network card(ethernet card working).
I am just a newer to Solaris, so it would be really appreciated if you could give me some suggestion about it, or where can I find those kind information.
Thank u in advanced.
Cheers,
Teng

I concur with the others on going straight to Leopard. Then resolve any issues before installing non-Apple applications (or older Apple ones, for that matter).
However, make sure ANY applications are Leopard-compatible before you install them.
And note that the iLife '08 installer is for a 30-day trial installation (fully functional for those 30 days) after which it needs to be purchased.

Suggestion for a possible iphone with slide out keyboard.

I dont really know if there is a suggestion forum but i thought it would be neat if apple designed a iphone with a physical keyboard for those people who love to text. Apple could even run a internet pole to see what there customers would think i mean the iphone is top notch but i think having one with a slide out keyboard could possibly increase apples sales. Any who just thought id throw that out there and keep up the great work Apple.

This is where you need to go with your suggestion: http://www.apple.com/feedback/iphone.html
I would not hold my breath.

Suggestions for creating a multiclip with SD & HD footage?

Hello All,
I was hoping to do a multcam edit with footage from 2 cameras from a recent shoot. It was a basic corporate presentation with a locked down SD camera capturing the presenter and a hand-held HD camera getting some close-ups, audience shots etc. I now see that you can't create a multi-clip with footage using different codecs. I thought about exporting all of the HD footage and using compressor to convert it to SD DV format, then just reimport that and go forward. But I liked the option of having the HD footage so I could zoom in and pan around the image where appropriate. Can anyone suggest a different workflow that would allow me the benefit of keeping the one source as HD and be able to do a multicam edit?
Thanks,
CJ

Yeah, I get what you're saying. I'm just debating on whether it will be more efficient to do that and have the availibility of the HD footage to 'play' around with for panning/zooming, or is the time savings of having a true multiclip more advantageous....
Thanks Again.

Suggestions for formatting external drive with bad block?

I have a OWC Mercury 300 GB external drive. I wanted to erase it and use it as a backup for one of my laptops. The drive had been working fine as a Time Machine back up for an old (intel) iMac. I told Disk Utility to erase and reformat. It erased, but refused to reformat saying there was a bad block on the drive. Now Disk Utility recognizes the external drive but won't do anything with it. No Verify. No Repair. All grayed out. Any suggestions?

I wasn't a hard error, that's why. Repartitioning and reformatting will often fix soft errors in the directory structure. Had there been a real, new, bad block on the drive it would not be repairable. A soft bad block error can be fixed by reformatting. The hard block error may be fixable by using Zero Data one pass that may spare out the bad block. But if none of that works then you need to replace the drive.
You were fortunate that the error probably was spurious and resolved by repartitioning (may have been in the disk's RDB.)

Any suggestions for editing Music Videos with Multiclip?

Hi there. I have been reading about the new multiclip feature in FCPHD5. Sounds as if it would be perfect for editing a performance music video with multiple run throughs. In fact it almost seems too good to be true. I was writing to ask if anyone has tried this and what problems they encoutnrered or what workflow they could recommend. I haven't used multiclip before (or editied many music videos either) and would appreciate any suggestions.
This is my idea so far.
capture offlineRT the whole tape, make subclips with an angle setting of each take. Then edit the multiclip in a timeline which includes the song as an audio track. I thought I would synch with inpoints manually set to the beginning of the songs first riff in playback (as there was no clapper on set that day, curse them)
I have questions about onlining as well and how to make it a less tormenting nerve racking experience. Maybe its just me but the thought of trashing all the media, duplicating projects and recapturing makes me break out in a cold sweat. But I'll deal with that later.
Thanks for your thoughts, observations, suggestions.
Have a merry Christmas
Sincerely
Peter Stenhouse

The plan was to sync up the mixed PT audio to the video track. However the club screwed up the recording and I was left with using the audio from one of the tripod mounted cameras that I placed a stereo mike on.< </div>
General advice for live performances:
1. Depending on a computer to make the only recording is a silly idea. Use tape or a minidisk. Take a line feed off the main board and record it on at least one of the cameras.
2. There is nothing that will substitute for missing timecode better than a good countdown. Insist the band develop a creative visual and aural timing cue that all cameras and mics can see.
3. The most important part of shooting a performance or a lipsync gig for mulitcamera assembly is preproduction. The bugs, glitches and gotchas are all well known and thoroughly documented on thousands of band blogs.
4. There is no excuse to go into a location shoot unprepared and carrying a solid backup plan for all of the stuff that will go wrong.
5. A full, all-camera, all-personnel rehearsal is a good idea.
6. The band's lighting guy knows nothing about video. Give him some help or give him the day off.
bogiesan

Check for mounted DFS share with exists in apple script

OS: OSX Mountain lion.
Can any one advise how to detect if a DFS share is mounted or not?
I have been using the following code:
set volumeLabel to "R$"
tell application "Finder"
exists disk volumeLabel
end tell
Which works fine with a normal SMB shares or attached hard drives but I cant get it to work with a DFS Share, it always returns false (see attached screen shot.
Also tried:
if volumeLabel is in (do shell script "/bin/ls Volumes") then
return true
else
return false
end if
Which didnt work with a DFS Share aswell.
Any help appreciated.
Cheers,
Richard

Hi,
Since you're checking to see if a value exists in the Desktop key, you can do something along these lines:
If (Get-ItemProperty -Path 'HKCU:\Control Panel\Desktop' -Name SCRNSAVE.EXE -ErrorAction SilentlyContinue) {
Write-Output 'Value exists'
} Else {
Write-Output 'Value DOES NOT exist'
EDIT: Sam, what version of PowerShell are you running? Your code doesn't seem to work for me on v4:
PS C:\> Push-Location
Set-Location "HKCU:\Control Panel"
$Result = Test-Path -Path ".\desktop\SCRNSAVE.EXE"
Pop-Location
$Result
False
Don't retire TechNet! -
(Don't give up yet - 12,950+ strong and growing)

How to install Oracle spatial in existing 10g database

Hi all,
I am using Oracle 10g 10.2.0.1.0 on Windows.
How to install Oracle spatial in my database.
I tried to do with DBCA with configure database option but in that Oracle spatial is in disabled state.
Please help I am newby to Oracle spatial
-Thanks & cheers
Antony

Hi Xaheer,
Thank you very much. I run that script, while running the script in some part its showing some errors.
Could you please tell me whether I have to do some task before executing this script.
-Thanks & Cheers
Antony

Suggestion for installing 11gr2 crs with existing 10g crs...

Similar Messages

Maybe you are looking for