Suggestion for Next Release - Dynamic Column Widths

Is it possible for the next release of xcelsius to allow the developer to dynamically set column widths?
Appearance > Layout > Custom Column Widths - let the developer bind the values dynamically to a range.
Thanks.

The XScorecard (part of the XComponents @ www.antivia.com which are free to download and free to use) does exactly this. In fact it does a little more because the column widths bind in both directions, which is useful to sync two tables together. If they are bound to the same column width cells then even if the end-user drags the columns in one table the second on changes as well. If there are things that the XScorecard does not do which you need it to then leave a comment and I will see how difficult it would be to add.

Similar Messages

Suggestion for next release of TM

Hi
I hope Apple takes up this suggestion or someone tells me I have been doing something wrong.
I have a 250GB external hard drive which I use for storing movies I make. I want to allocate half my 250GB to TM. I don't want to reformat my external drive with its current moves and set up 2 partitions.
It would be nice if in System Preferences one had the capability to allocate a % of the external drive to TM.
Hopefully fixed in next update.
Regards

I don't think you really understood my post.
To do such a thing would be to put your data in danger.
As TM changes how the file system (the thing which keeps track of your files and so on) works it would be unsafe to promote such a behavior you wish for. And by giving the option to set a limit on how much space TM may use on a partition Apple would in some way promote this dangerous setup.
But on the other hand such a thing could be useful if you were to have several computers with TM to use the same partition.
My point is that Apple will probably not implement your request as it would be more dangerous than helping, in most of the cases were it would be used.

Nokia C3-01, suggestions for next S/W update

I am using Nokia C3-01 from 2 weeks. It is nice phone with touch and type combination. I would like to add some suggestions for next software update.
1. Brightness control
2. When writing a text message, tapping # change only alphabet from capital to lower case, but missing numeric. I have to press 3-4 times to write numeric in text. Also have no 'option' to insert numeric. If I change other language (not English, which is automatic), then I can get numeric by tapping #. Nokia, please care it for next firmware update.
Solved!
Go to Solution.

You can do a long press on the keys to get the numeric value instead of pressing it three to four times. This works for all Nokia since years, if they have keys
Or do a long press on the # key. This gives you the option to activate numeric input. Also a quite old feature for Nokia phones.

Suggestion for future release

Where should I post suggestions for future releases of SQL Developer or/and Data Modeler?
Please give me a link.
Thanx,
Chris
One suggestion for Data Modeler:
In the "Model Properties" of a relational model, there should be a "scripts" folder like in the "Table Properties".
In this script I'd like to generate some global statements for the DDL generation,
for example:
before (=begin of generated script): set define off; alter session set nls_numeric_characters='.,'; nls-config
after (=end of generated script): commit; (when table inserts are used and no ddl-statement is following; otherwise you have to use 'commit' in each table-script; After the last table create (ddl-) statement there is no implicit 'commit')
I know, that I can edit the generated script to add my statements, but if you often generate code there is a good change to forget to change the script afterwards.

Hi,
You can submit any feature requests at Oracle SQL Developer Exchange - https://apex.oracle.com/pls/apex/f?p=43135:1:2266866887402592:::::

Dynamic Column width for a report

Will the width property of a column be able to be set at run-time (i.e. ability to set the width of a column to an expression) in SQL Reporting Services 2008? One problem I have seen is the inability to set the width of columns in a report when you you have several columns whose order is determined based on parameters.
Lets say I have 2 columns in a report and two fields from the database which will populate those columns: 1 field that is varchar(5) and one which is varchar(50). If I do not know which column each field will go to until runtime how am I supposed to adjust the column width? Letting the column width be set by an expression would solve everything as I could pass the width in to the report. As it stands now, I would have to set each column's width to accomodate a field of type varchar(50) in order to avoid wrapping of data.
You could say just create 2 reports, one for each case, but what if I had 15 fields? 20?
Has anyone figured out how to dynamically set the width of a column? Will the width of a column be able to be set at run-time in SQL Server Reporting Services 2008 via expression or some other means?
Questions, questions, questions.
Chuck

Ok slight update
RDL xml files are used during deisgn of reports but when you deply they go into the Content column of a table called Catalog:
SELECT [Name],
CAST(CAST([Content] AS VARBINARY(MAX)) AS XML) AS reportXML
FROM [Catalog]
WHERE type = 2
So I think this can be edited programmatically. Widths can be found like this:
        <TableColumns>
          <TableColumn>
            <Width>9cm</Width>
          </TableColumn>
          <TableColumn>
            <Width>3.02646cm</Width>
          </TableColumn>
          <TableColumn>
            <Width>3.25cm</Width>
          </TableColumn>
          <TableColumn>
            <Width>3.5cm</Width>
          </TableColumn>
          <TableColumn>
            <Width>3.5cm</Width>
          </TableColumn>
        </TableColumns>

How to set dynamic column width for analysis item

Dear Experts,
I have a query view which is added in the web template as an analysis item. The web item properties on width is not working - I tried entering a value in the width but when I execute the template, the query view's width still stays the same.
Module com.sap.ip.bi.rig.ColumnWidth don't seem correct because I don't want the column width to be static. As my number of columns may change, I wanted the overall width of my query view to stay the same.
Appreciate any ideas which can solve this issue
Thanks and Regards,
huimin
BW newbie

Hi Huimin,
I don't think it is possible to fix the width of the Analysis webitem since it dynamically adjusts its width based on the text maxlength within its cells. Unless you use com.sap.ip.bi.rig.ColumnWidth where the cols are static, you cannot achieve this.
Even if you do override the css settings using a cell padding or something, the portal settings would override the same. How about using a Report webitem to insert tables/charts & check if the width can be adjusted here - just a thought.
--Priya

More items for next release

I read that another user would like to be able to alphabetize their bookshelves and I could not agree more. But I have one other request.
When you load a book you don't have the option of changing the title or the author. No complaints about that - EXCEPT - not all publishers follow the same format of last name first, first name last. Even from the same publisher a different format could be used.
I end up with books by the same author that I cannot get sorted into the same general area in my library unless I make bookshelves.
Bookshelves don't alphabethize. So, it can end up being a mess.
Furthermore, titles don't take into account that a certain book is from a specific series. So, it is difficult (if not impossisble) to arrange things in a way that is meaningful, even if the author name is formatted identically.
Can you add allow me to add and hide columns in the library? I would want to be able to add my own data in these fields. This way I can sort by author, series or some other key word that is relevant.
Another option would be to allow for sub folders within the bookshleves. That would be great too.
Your efforts are greatly appreciated.
Thanks, Cozworth

Thank you for the feedback. Making the Library better in general is certainly one of things I am looking forward to working on in the next release.

Approximate time for next release

Can anyone at Adobe give a general idea for timing of the next release? Eg. Q4 2010, Q1 2011

Hello out there....
I've been waiting for someone from Adobe to answer this one?
After lots and lots of great feedback and suggestions from this forum, can you give us hint of when we might see some of them, pretty please?

Spark DataGrid with Dynamic Column Width

Lets suppose I have a Spark Datagrid with no explicit typicalItem. When the Datagrid is initialized, the column widths are calcualted correctly based on the contents of the dataprovider. However if I add/remove an item from the dataprovider, or modify the one of the objects in the dataprovider, the column widths never update to reflect the change. Is the the correct behavior for a DataGrid? If so, is there any method I can call to force the DataGrid to recalculate and redraw the column widths?

When Spark DataGrid doesn't have a typicalItem, it uses the first dataProvider item as the typicalItem. If you change that, the DataGrid won't pick it up immediately. You can invalidate the current typicalItem using dataGrid.invalidateTypicalItem().

Call for beta testers for next release of ODT

The next release of ODT is approaching (no dates yet) and we are seeking motivated testers who can help us by playing with the product and providing valuable feedback.
If you would like to participate, please email me at [email protected] Just a note: I cannot guarantee there will be space for everyone who wants to join the beta.
Please include in your email whether your work is primarily with Windows applications or ASP.NET applications and whether or not you use source control regularly.
Thanks!!!

How abut you perfect it for PC / Firefox first? I just updated to Firefox 9.0.1 and click to call is broken. I cannot find any reference for it in Tools.

Suggestion for next/last firmware release of WRVS4400N v2

Since this router already set up for IPv6 and Dual-Stack traffic, would it be possible to give it the ability to get its IPv6 prefix from the WAN side of the router.
Example:
I have Comcast, and as long as my modem and router support IPv6, with the router also supporting DHCPv6-PD to get the /64 prefix from comcast.
I now have an RV180W so this is not an issue for me, but my father is inheriting the WRVS4400N from me and he is also on Comcast.
Thanks
Robert Hessenauer

Hello Mr. Hessenauer,
On this case I recommend you to install the latest firmware available for this device (2.0.1.3)
Let me send you the link from the cisco site where you could download it.
http://www.cisco.com/cisco/software/release.html?mdfid=282414016&softwareid=282487380&release=2.0.1.3&relind=available&rellifecycle=&reltype=latest
If this answer was satisfactory for you, please mark the question as Answered.
Diego Rodriguez
Cisco network engineer
Thank you

Suggestion wanted for next release Sun Studio installer?

My name is Ngoc Nguyen, tech lead of Sun Studio Support Group. We are in the process looking for design/modifying our installer per customer's feedbacks or requests. We really want to make it become your most favorite installer.
Please give me all of your ideas, suggestions, requirements that you like the installer should have. We will consider any feedbacks.
Or If you already filed a CR (Changed Request) before and you feel strongly that we should implement it, please give me the CR number.
We really want to hear from you.
Best Regards,
Ngoc Nguyen
Sun Studio Support Team

I think new installer should provide an option to install the product as if it is extracted from a tar file:
- no packages are installed
- no changes in registry
- no root privileges are needed
- the product is completely installed under one directory,
so it is easy to uninstall this version - just remove one directory.
This installation is a very convenient way to try a new version without affecting any existing installation.
Thanks,
Nik

Suggestion for next vision box

Hi, just a thought for the mods if they are able to feedback by any channels about any next gen box...
Lots of people have suggested freeview hd
Capabilities, which would be great... I think that it would be great if the box could have wifi capabilities instead of using comtrend power adapters, I would also imagine this would be much cheaper to supply when inbuilt.
Thanks
Richard

nostra999 wrote:
Apple tv does it successfully with low amounts of solid state memory and streaming very reliably globally using primarily wifi. If done right I cannot see why this should be a problem??
Also Sony and Microsoft run comparable services.
Don't even start me on Apple TV! It's about time we had some updates so this at least works, rather than acting as a sleek paper weight in the corner!
Kyle
=======================================
If you found my post helpful, please give Kudos on the left!
=======================================

A suggestion for next 5800XM firmware update

I hear all the time people wants widgets on their homescreen. i'm not sure if this the waht i really miss there.
instead i will be much more happy if i could have the contact bar above (and more than 4 contacts, at least 6-7 which we could roll left/right), and under this bar should be the application bar (and again, more than 4, which we could roll).
under both should be the google search (which is great), and the tasks/notes, which is my most important feature on the phone.
and how it all should work?
i want to see a full desktop when i start my phone, and when i choose my contact the other tasks/apps dissappear from the screen (or being transparent).
i don't understand why i have to choose between contacts and apps, and most of the time they both don't take advantage 5800's hugh screen (by leaving large spaces unused).
but if we could see a Facebook widget or a normal weather widget on the next firmware update, it could be nice (but less necessary) ...
good luck!
Lior R.

that is a nice idea you have there, but one must think about how practical all these changes and additions will be. if one must have, lets say 6 contact icons next to each other in one row, the icons would have to be small in order for them to fit in nicely. i do notice that the way you have imagined the new home screen is much like the old S60 3rd edition, but do note that the 3rd edition was not touch screen. there are many people who wish different things for certain handsets, mine would be that the 5800XM should have a more windows vista feel to it, with option lists and screen appearing and dissapearing into the screen as though it was another layer on top of the previous page.
you must also remember that the S60 5th edition on the 5800XM is the a new version of the software, being added on the first Nokia touchscreen smart phone, so there are still many things Nokia has to learn from the 5800XM "test" phone.
hopefully our ideas will be seen in the new future.
Kind regards,
Memphis

Suggestion for next firmware update - Nokia 5800

If anyone from nokia is reading this in the next firmware update for the Nokia 5800 XM can we have the facility of have the name of the title track of a song scroll from left to right whilst the song is playing, as at the moment it scrolls once and then stops so if its a song with a long title all you can see is just half the title after its scrolled once, and also maybe a way as the song is playing of seeing the details of the song playing (like the tags for artist, Kbps, song title, album name) by clicking the onscreen softkey/options button. And also this can be extended to the contacts list where the name will scroll from left to right to show the full contact name when you press on it, at the moment it doesn't do that.

Unfortunately the care centres are the only people that can help you.
Any other methods that you may read about on other forums will void your warranty and cannot be discussed here.

Suggestion for Next Release - Dynamic Column Widths

Similar Messages

Maybe you are looking for