Suggestion for the Certification forum

A large number of questions in the Certification forum would be answered either by going to the Education -> Certification page or into the Certification FAQ.
Perhaps the OCP guys could add the links in the forum title area, just like the links and information are provided for this forum.

Useful info.... as product - related forums are full of questions regrading OCP.....
Greetings....
Sim

Similar Messages

  • Resources for the certification

    Dear Experts,
    I would like to apply for the certification of OCA,OCP developer,
    What the resources you advise me to prepare for the exams by ?
    I am new in oracle and need your experience and help in this.
    Thanks In Advance
    Tamer

    Dear Experts,
    I am new in this community.
    I want to do certification in Oracle for developer. Please suggest me which of these should I opt OCA,OCP.
    and please give me the guidelines for certification as which exam code should be opted first and which book should I prefer for it.
    Thanks & Regards,'
    Richa
    Edited by: 880361 on Aug 19, 2011 2:49 AM

  • MOVED: Thanks for the new Forum!

    This topic has been moved to Forum Info & News corner.
    Thanks for the new Forum!

    I too have benefited from good advice on my MSI K8n Neo2 mb questions.  The members here are knowledgable and polite.  Questions asked nicely are answered by good suggestions.  Thanks to MSI for sponsoring such a useful owner's forum.   

  • I would like to make a suggestion for the next iso iphone 4-4s update.  Include a seperate treble and bass switch. What do u people out there think about this

    I would like to make a suggestion for the next iso itunes software update for the iphone 4-4s.  Include a serperate treble and bass switch for the ipod on the iphone.  What to you people out there think about this?

    vince20 wrote:
    Obviously you dont like listening to music on your ipod in iphone.  The EQ is crap
    Not true at all.
    I listen to music on my iphone all the time.
    It is your position that anyone who does not agree with you does not listen to music?
    Really?
    What a leap.

  • Is there any suggestion for the "SafeNamedCache was explicitly released"

    I deployed the coherence-java-3.6.0-java on red had with core 2.6.18 with 64 bit.
    Then the deployed the coherence-3.6.0-cpp on the same manchine and complied the example "hellogrid" and it works ok . No any error .
    My requirement is to integrate the Coherence into the Nginx0.7.62 for my web server . And i wrote a thread pool for the NameCache::handle and get a newly hendle after a 5 seconds just because of the error "was explicitly released" . But it is not useful for solving the problem .
    Anybody please give me a suggestion for the root cause of this problem .
    Thanks .
    And the configurate as follows which are all copied from the configurate file for the example "hellogrid"(coherence-cpp/examples/config/extend-server-config.xml and coherence-cpp/examples/config/extend-cache-config.xml):
    extend-server-config.xm:
    <?xml version="1.0"?>
    <!DOCTYPE cache-config SYSTEM "cache-config.dtd">
    <cache-config>
    <defaults>
    <serializer>pof</serializer>
    </defaults>
    <caching-scheme-mapping>
    <cache-mapping>
    <cache-name>dist-*</cache-name>
    <scheme-name>example-distributed</scheme-name>
    </cache-mapping>
    <cache-mapping>
    <cache-name>repl-*</cache-name>
    <scheme-name>example-replicated</scheme-name>
    </cache-mapping>
    <cache-mapping>
    <cache-name>local-*</cache-name>
    <scheme-name>example-local</scheme-name>
    </cache-mapping>
    <cache-mapping>
    <cache-name>*</cache-name>
    <scheme-name>example-distributed</scheme-name>
    </cache-mapping>
    </caching-scheme-mapping>
    <caching-schemes>
    <distributed-scheme>
    <scheme-name>example-distributed</scheme-name>
    <service-name>DistributedCache</service-name>
    <lease-granularity>member</lease-granularity>
    <backing-map-scheme>
    <local-scheme/>
    </backing-map-scheme>
    <autostart>true</autostart>
    </distributed-scheme>
    <replicated-scheme>
    <scheme-name>example-replicated</scheme-name>
    <service-name>ReplicatedCache</service-name>
    <lease-granularity>member</lease-granularity>
    <backing-map-scheme>
    <local-scheme/>
    </backing-map-scheme>
    <autostart>true</autostart>
    </replicated-scheme>
    <local-scheme>
    <scheme-name>example-local</scheme-name>
    </local-scheme>
    <invocation-scheme>
    <scheme-name>example-invocation</scheme-name>
    <service-name>InvocationService</service-name>
    <autostart>true</autostart>
    </invocation-scheme>
    <proxy-scheme>
    <scheme-name>example-proxy</scheme-name>
    <service-name>ProxyService</service-name>
    <thread-count system-property="tangosol.coherence.extend.threads">2</thread-count>
    <acceptor-config>
    <tcp-acceptor>
    <local-address>
    <address system-property="tangosol.coherence.extend.address">localhost</address>
    <port system-property="tangosol.coherence.extend.port">9099</port>
    </local-address>
    </tcp-acceptor>
    <outgoing-message-handler>
    <request-timeout>5s</request-timeout>
    </outgoing-message-handler>
    </acceptor-config>
    <autostart>true</autostart>
    </proxy-scheme>
    </caching-schemes>
    </cache-config>
    extend-cache-config.xml:
    <?xml version="1.0"?>
    <!DOCTYPE cache-config SYSTEM "cache-config.dtd">
    <cache-config>
    <defaults>
    <serializer>pof</serializer>
    </defaults>
    <caching-scheme-mapping>
    <cache-mapping>
    <cache-name>local-*</cache-name>
    <scheme-name>local-example</scheme-name>
    </cache-mapping>
    <cache-mapping>
    <cache-name>near-*</cache-name>
    <scheme-name>near-example</scheme-name>
    </cache-mapping>
    <cache-mapping>
    <cache-name>dist-*</cache-name>
    <scheme-name>extend-dist</scheme-name>
    </cache-mapping>
    </caching-scheme-mapping>
    <caching-schemes>
    <local-scheme>
    <scheme-name>local-example</scheme-name>
    </local-scheme>
    <near-scheme>
    <scheme-name>near-example</scheme-name>
    <front-scheme>
    <local-scheme>
    <high-units>100</high-units>
    <expiry-delay>1m</expiry-delay>
    </local-scheme>
    </front-scheme>
    <back-scheme>
    <remote-cache-scheme>
    <scheme-ref>extend-dist</scheme-ref>
    </remote-cache-scheme>
    </back-scheme>
    <invalidation-strategy>auto</invalidation-strategy>
    </near-scheme>
    <remote-cache-scheme>
    <scheme-name>extend-dist</scheme-name>
    <service-name>ExtendTcpCacheService</service-name>
    <initiator-config>
    <tcp-initiator>
    <remote-addresses>
    <socket-address>
    <address system-property="tangosol.coherence.proxy.address">localhost</address>
    <port system-property="tangosol.coherence.proxy.port">9099</port>
    </socket-address>
    <socket-address>
    <address system-property="tangosol.coherence.proxy.address">127.0.0.1</address>
    <port system-property="tangosol.coherence.proxy.port">9099</port>
    </socket-address>
    <socket-address>
    <address system-property="tangosol.coherence.proxy.address">172.16.1.23</address>
    <port system-property="tangosol.coherence.proxy.port">9099</port>
    </socket-address>
    </remote-addresses>
    <connect-timeout>10s</connect-timeout>
    </tcp-initiator>
    <outgoing-message-handler>
    <request-timeout>5s</request-timeout>
    </outgoing-message-handler>
    </initiator-config>
    </remote-cache-scheme>
    </caching-schemes>
    </cache-config>
    Anyone who knows the root cause please tell me . Thanks .

    The original error shown in the console of the Coherence server as follows :
    2010-11-23 22:27:33.742/1566.313 Oracle Coherence GE 3.6.0.0 <D5> (thread=Proxy:ProxyService:TcpAcceptorWorker:0, member=1): An exce
    ption occurred while processing a PutRequest for Service=Proxy:ProxyService:TcpAcceptor: java.lang.IllegalStateException: SafeNamedC
    ache was explicitly released
    at com.tangosol.coherence.component.util.SafeNamedCache.ensureRunningNamedCache(SafeNamedCache.CDB:23)
    at com.tangosol.coherence.component.util.SafeNamedCache.getRunningNamedCache(SafeNamedCache.CDB:1)
    at com.tangosol.coherence.component.util.SafeNamedCache.put(SafeNamedCache.CDB:1)
    at com.tangosol.coherence.component.net.extend.proxy.NamedCacheProxy.put$Router(NamedCacheProxy.CDB:1)
    at com.tangosol.coherence.component.net.extend.proxy.NamedCacheProxy.put(NamedCacheProxy.CDB:2)
    at com.tangosol.coherence.component.net.extend.messageFactory.NamedCacheFactory$PutRequest.onRun(NamedCacheFactory.CDB:6)
    at com.tangosol.coherence.component.net.extend.message.Request.run(Request.CDB:4)
    at com.tangosol.coherence.component.net.extend.proxy.NamedCacheProxy.onMessage(NamedCacheProxy.CDB:11)
    at com.tangosol.coherence.component.net.extend.Channel.execute(Channel.CDB:39)
    at com.tangosol.coherence.component.net.extend.Channel.receive(Channel.CDB:26)
    at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Peer$DaemonPool$WrapperTask.run(Peer.CDB:9)
    at com.tangosol.coherence.component.util.DaemonPool$WrapperTask.run(DaemonPool.CDB:32)
    at com.tangosol.coherence.component.util.DaemonPool$Daemon.onNotify(DaemonPool.CDB:63)
    at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
    at java.lang.Thread.run(Thread.java:619)
    It is shown again and again for any operation before the Coherence server is restart.

  • Suggestion for improvements to forum search

    Hi,
    It would be useful if I could save search criteria under my profile as "Saved searches" - e.g. a search for "Universal Worklist or UWL in the last 7 days".
    It would also be great if I could save a set of search terms and get an RSS feed of the results.
    That would enable me to monitor forums for posts in my specific area of expertise.
    Cheers,
    Darren

    Just for the record, I second this suggestion. I'd rather have a 'search results' than the current 'Forum watch' notifications.  A new problem that has arisen with the plethora of new forums is that people get confused and tend to post stuff all over the place. I simply do not have the time to monitor more than one forum.
    e.g. there's a forum for WebAS Preview but half the people having problems with it are posting in "Trials, Previews and Code Samples". Are they wrong? No, but I still have two forums to look at if I want to participate. 
    My own area of expertise (workflow) tends to be scattered around ABAP, BPX, EP (and others) as well as "BPM and Workflow".
    Cheers,
    Mike

  • Suggestion for the PlayBook Team

    There have been suggestions made and issues identified with the PlayBook on this and other forums. Many of these are understandable with the initial release of a totally new product, new OS, and very limited development time.
    My issue is more fundamental: What is the PlayBook supposed to be?
       1) Business Tool?
       2) Entertainment Device?
       3) Smartphone Extension/Enhancement?
    It appears that PlayBook is trying to be "all of the above, to all people, and master of none"
    The PlayBook was to be my business tool. Unfortunately it currently fails to meet my minimum business requirements. The functionality for the two other uses seems to be limited as well.
    It would be helpful if the PlayBook Team conveyed the primary purpose of the PlayBook; and, concentrated  development in that direction. This would provide a realistic expectations as to the future use of my PlayBook.

    What is wrong with all of the above?
    What's the focus of the iPad, Xoom and Tab?
    I do believe you'll see it fulfill all three as apps develop and time passes. Obviously right now it's not serving your needs.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Suggestions for the interactive guide

    I have been using FIOS TV service now for several months, and seen several iterations of the guide come through. I have a number of issues I would like to suggest for improvements.
    First a suggestion about DVR and show recording. I have 2 DVRs, as we record a lot of TV and need the 4 tuners. I love that I can access recordings from either DVR as I want. However, it would be really great if I could just have a single schedule of shows set to record and let the two DVR's figure out what should record where based on the availability of tuners in the DVR's which would not produce conflicts.
    I essentially need to put together my own matrix in order to figure out what set to record on which DVR based on when shows air. It would be great if the DVRs could talk to each other and intelligently figure out where to record.
    A big issue I have encountered is that sometimes only part of a show will record. The biggest issue has been because for whatever reason, CBS's "Person of Interest" has only recorded 30 minutes of the show, and only the latter 30 minutes. There was no indication on the scheduled recordings view that the show would only partially record, it just showed that it would record. For most shows at least, they will either re-air the show, or I can get caught up on one of several streaming services. This is the only show that is not available as a re-run or on ANY streaming service.
    If a show is going to only partially record, it should be clearly indicated, and it actually should just not record - it should show to me that there is an issue or conflict with another show recording into the 1st half of this show which would prevent a full recording. This is a huge bug in the recording logic that should be fixed.
    From the menu guides, I would really  like the option to set the default menu starting point. I do not way ANY pay preview, or pay for any on demand content. I have never done that with any TV provider I have had, and I don't plan to start now, the fact that the menu always defaults to searching on demand is annoying. 
    The entire menu experience feels not as if its designed to allow me to easily or quickly navigate and make the changes or selections I want, but instead it constantly wants me to basically buy a movie or TV show. There are plenty of ways to design an interface which allows you to promote your pay services and also allow me to get into the areas of the menu I need in an intuitive manner.
    I do like that the DVR remembers some of my recent searches, a nice feature. It would be great for homes with multiple DVRs to allow the DVR's to act more as a "single unit" and share that information between the units so I don't have to go figuring out which DVR I previously searched for something. The search menu should also allow you to set some basic filters - when I go into search, 99% of the time I am going to search for something specific - the title of a movie or TV show. The search results should show me just that, I don't need to see actors or all the other options when I search by default - I should be able to go into advanced search to get broader or complex with what I am searching for. I should also be able to turn off searching in certain areas - like pay-per-view or on-demand options. 
    P.S. - the spell check component of the post message feature should really have "FIOS" and "DVR" in the dictionary.

    sbobcat wrote:
    I have been using FIOS TV service now for several months, and seen several iterations of the guide come through. I have a number of issues I would like to suggest for improvements.
    First a suggestion about DVR and show recording. I have 2 DVRs, as we record a lot of TV and need the 4 tuners. I love that I can access recordings from either DVR as I want. However, it would be really great if I could just have a single schedule of shows set to record and let the two DVR's figure out what should record where based on the availability of tuners in the DVR's which would not produce conflicts.
    I essentially need to put together my own matrix in order to figure out what set to record on which DVR based on when shows air. It would be great if the DVRs could talk to each other and intelligently figure out where to record.
    A big issue I have encountered is that sometimes only part of a show will record. The biggest issue has been because for whatever reason, CBS's "Person of Interest" has only recorded 30 minutes of the show, and only the latter 30 minutes. There was no indication on the scheduled recordings view that the show would only partially record, it just showed that it would record. For most shows at least, they will either re-air the show, or I can get caught up on one of several streaming services. This is the only show that is not available as a re-run or on ANY streaming service.
    If a show is going to only partially record, it should be clearly indicated, and it actually should just not record - it should show to me that there is an issue or conflict with another show recording into the 1st half of this show which would prevent a full recording. This is a huge bug in the recording logic that should be fixed.
    From the menu guides, I would really  like the option to set the default menu starting point. I do not way ANY pay preview, or pay for any on demand content. I have never done that with any TV provider I have had, and I don't plan to start now, the fact that the menu always defaults to searching on demand is annoying. 
    The entire menu experience feels not as if its designed to allow me to easily or quickly navigate and make the changes or selections I want, but instead it constantly wants me to basically buy a movie or TV show. There are plenty of ways to design an interface which allows you to promote your pay services and also allow me to get into the areas of the menu I need in an intuitive manner.
    I do like that the DVR remembers some of my recent searches, a nice feature. It would be great for homes with multiple DVRs to allow the DVR's to act more as a "single unit" and share that information between the units so I don't have to go figuring out which DVR I previously searched for something. The search menu should also allow you to set some basic filters - when I go into search, 99% of the time I am going to search for something specific - the title of a movie or TV show. The search results should show me just that, I don't need to see actors or all the other options when I search by default - I should be able to go into advanced search to get broader or complex with what I am searching for. I should also be able to turn off searching in certain areas - like pay-per-view or on-demand options. 
    P.S. - the spell check component of the post message feature should really have "FIOS" and "DVR" in the dictionary.
    Hello,
    Nice post!!
    A couple of things:
     Suggestions for FiOS TV programming (or for any Verizon service/product/offering on the internet, telephone or TV) can be made on the 'Idea Exchange' section of the forum where it'll be noticed more by other Verizon community members as well as Verizon employees who can bring up individual ideas to the appropriate teams.
    Also, forum members can vote on the posted idea for greater emphasis.
    Please see:
    http://forums.verizon.com/t5/Verizon-Idea-Exchange-FAQs/Idea-Exchange-FAQs/td-p/231267 for more details.
    The direct link to the Idea Exchange section is found here:
    http://forums.verizon.com/t5/Verizon-Idea-Exchange/ct-p/ideaexchange
    Some of your recommendations may very well have been posted by other folks! 

  • Can anyone please  suggest for the following query relating to OEDQ ?

    I have to process 10M  records through batch matching by Oracle EDQ.  There will be 10 file(.csv)  each size 1M. They will be placed landing area of EDQ one by one separately. Given, All 10 file should have same number of columns & same order of columns. I have to process them one by one sequentially through only single batch contact match job.
    Condition is : 
    Only one batch job will be executed 10 times to process them. At each iteration/operation, one file (.csv) will be taken as input in that job. As we know, only one source is present in  job. I have to create /run ShellScript which will be passing  one file to the single snapshot  via single datastore from the landing area of EDQ. Once the one input file  is passed and complete matching is done, Without changing anything, Is it possible to pass 2nd input file  to that snapshot via previously created datastore by that Shell-script.
    I mean, I want to pass one by one file  sequentially  via  single snapshot via single datastore to a batch job  using unix shellscript. 
    Is it feasible to consider in my project????
    Any suggestion will be highly appreciated. Thanks in advance.

    Hi Mike,
    Thanks for the quick response.
    Keeping in mind source will be changed sequentially/one after another but the target is constant & the same JOB will be executed each time.
    suppose, I have two file in the landing area of EDQ. These file are:  PersonData.csv  and goutam.csv
    PersonData.csv is used in current data store.
    File in the working area:    C:\Program Files\Datanomic\dnDirector\config\landingarea\PersonData.csv
    Snapshot is using  this datastore. I have right clicked on the snapshot. I have done setting externalize option enable.
    I am using the command:
    java -jar jmxtools.jar runopsjob -job "Testing for R3  source A" -project EDQ-CDS -runlabel Nov2014 -nowait -u dnadmin -p p4dqnvo2 localhost:9005
    This command is successfully executing batch job "Testing for R3  source A "   where source is PersonData.csv.
    Now, I  want to use the following command with externalize option to execute  the file goutam.csv as source  by the above job.
    I am using the below command:
    java -jar jmxtools.jar runopsjob -job "Testing for R3  source A" -project EDQ-CDS -runlabel Nov2014 -D externalized=goutam -nowait -u dnadmin -p p4dqnvo2 localhost:9005
    this command also executes the file PersonData.csv instead of goutam.csv file.  In the above command I have highlighted  externalize option with deep black color . please let me know how I write this externalize option in the command so that it should execute goutam.csv file.
    Meanwhile, I am googling to find solution.
    Regards,
    Goutam Samanta

  • Right place to submit bug reports for the discussions forums?

    I know you can post suggestions here regarding how the Discussions system may be improved, but I'd just like to record a bug somewhere and then be informed if and when it is ever fixed. I'm thinking of something like the bugreporter web app that apple makes available. Anyone know about anything like that?

    Tom Gewecke wrote:
    You'd be surprised.
    With pleasure!
    Try it with bugreport.apple.com. Need to be a registered ADC Member, but that frees. Be sure to pick a bug that is reproducible with a simple step by step recipe on the most current software.
    So what is this bug you have been talking about?
    Recurring complaint of mine:
    March 2006 [If the RSS feeds contained pubDate and author that would be great!|http://discussions.apple.com/message.jspa?messageID=1892109#1892109]
    April 2008 [better rss feeds without jf namespace prefix|http://discussions.apple.com/thread.jspa?threadID=1468264&tstart=189]
    The RSS feeds are almost useful. They actually include the author and create date information, but do so in a format that neither safari or any other garden variety RSS reader handles.
    Jive's own documentation on the subject [Jive Community: Content Syndication via RSS|http://www.jivesoftware.com/community/docs/DOC-1022] recommends reformatting the output to suit the needs of your audience in the section titled "*Displaying RSS (or, actually doing something with this stuff)*".
    It seems the jf: prefixed tags aren't meant to be pushed out to the RSS clients. I certainly haven't found a RSS reader that deals with them correctly or lets you workaround them. So although the feeds have a creation date, modification date, author, and reply count, none of that information can be seen in a garden variety RSS reader. This is particularly a problem for the create date, since the create date of each article is replaced with the pub date of the feed. The pub date of the feed is the time when you pull it down, and that changes each time the feed is refreshed.
    Anyway ... it seems to me that it would be a small and correct change that would take the existing RSS offerings that last inch into the realm of useful. Maybe I'll be surprised.

  • Community Rankings for the Lulu Forums

    Once you register a user name in the Lulu forum community you are eligible for a community ranking. The more time you spend in the community reading, posting, and commenting on posts the more "points" you earn towards your ranking.
    Ranking Categories and Requirements
    The minimum requirements to reach each level are listed below. The longer your membership and the more you interact with the community, the more esteemed your "title" becomes.  Note that ALL ranking criteria must be met to advance to the next level.
    Ranking
    Posts
    Logins
    Registration Age
    Kudos Given
    Kudos Received
    Accepted Solutions
    New Member
    0
    Reader
    0
    2
     5 days
    Author
    5
     10 days
    Proofreader
    25
     60 days
     >= 5
    Editor
    100
    120 days
    >= 10
    >= 10
    Publisher
    200
    180 days
    >= 50
    >= 50
    >= 5
    Bibliophile
    400
    1 year
    >= 100
    >= 100
    >= 25
    Librarian
    800
    2 years
    >= 500
    >= 500
    >= 50
    Teacher
    1600
    3 years
    >= 1000
    >=1000
    >= 75
    Professor
    3000
    4 years
    >=2000
    >= 2000
    >=100
    Chancellor
    5000
    5 years
    >= 4000
    >= 4000
    >= 200
    Lulu Genius
    10000
    6 years
    >= 5000
    >= 5000
    >= 400
    Lulu employees are identified by the Lulu logo displayed next to their user name.

    Once you register a user name in the Lulu forum community you are eligible for a community ranking. The more time you spend in the community reading, posting, and commenting on posts the more "points" you earn towards your ranking.
    Ranking Categories and Requirements
    The minimum requirements to reach each level are listed below. The longer your membership and the more you interact with the community, the more esteemed your "title" becomes.  Note that ALL ranking criteria must be met to advance to the next level.
    Ranking
    Posts
    Logins
    Registration Age
    Kudos Given
    Kudos Received
    Accepted Solutions
    New Member
    0
    Reader
    0
    2
     5 days
    Author
    5
     10 days
    Proofreader
    25
     60 days
     >= 5
    Editor
    100
    120 days
    >= 10
    >= 10
    Publisher
    200
    180 days
    >= 50
    >= 50
    >= 5
    Bibliophile
    400
    1 year
    >= 100
    >= 100
    >= 25
    Librarian
    800
    2 years
    >= 500
    >= 500
    >= 50
    Teacher
    1600
    3 years
    >= 1000
    >=1000
    >= 75
    Professor
    3000
    4 years
    >=2000
    >= 2000
    >=100
    Chancellor
    5000
    5 years
    >= 4000
    >= 4000
    >= 200
    Lulu Genius
    10000
    6 years
    >= 5000
    >= 5000
    >= 400
    Lulu employees are identified by the Lulu logo displayed next to their user name.

  • Where can I leave suggestion for the manufacturers???

    Anybody knows where can suggestions can be posted for the future improvements for the software to our Ipods??
    Some things that I'd love to see in the next Ipods or software are:
    - Scrolling of the whole album name, Artist name on the screen of the Ipod
    - During the mode sleep would be nice to set the volume low level for sleep and for "alarm" mode it would be perfect wake up with a louder volume.
    - For the clock settings moving the digits each one 9,8,7,6,5,4,3,2,1,0 independently instead to go around the clock for 12 hours everytime when a new alarm is set.
    - Timer for sleep if could be "open" to everybody own time it would be great other than 15 mins 30 mins 60 mins etc there 1,2,3,4,5,6,7,8,9 etc much better in this case for sleep.
    I wish that the people that is involved with the development and manufacturing of our favorite player could do something about it otherwise who else???
    Share this message all around if there something can be done it is here and is with apple.
    Any ideas around???
    Thank you all for the interest and enthusiasm!!!
    5 gen   Windows XP Pro  
    5gen   Windows XP Pro  
    5 gen   Windows XP Pro  

    Hey!
    Try hereApple Feed Back
    Cheers,
    John
    iMac G5 1.8GHz 20"   Mac OS X (10.4.7)   ipod 30GB Video Black v.1.2 Agent 18 Case iTunes 7.0.1 Bose Sounddock

  • HT3275 Any other suggestions for the message the backup volume is read only

    I keep getting the message Time machine is unable to complete the backup because it appears the backup volume is read only.  I've tried the suggested repairs from apple for this but keep getting the same problem.  Any suggestions?

    The Master of the Time Machine, Pondini has extensive documentation and he mentions your particular problem in the following link.
    http://pondini.org/TM/C6.html

  • Any printer suggestions for the ibook g4

    I am completely overwhelmed and in need of some suggestion of the most compatable printer for the ibook g4. Mine is a 2004 model

    Hi Hotrodgirlly,
    Welcome to Apple Discussions
    What are you going to use the computer for and what features do you want(example: mostly printing documents, normal amount of pictures, professional photography, as well as all-in-one, scanner, fax, fast printing, portability, quality of print outs, etc)? Price range?
    You may want to look at the following threads...
    http://discussions.apple.com/thread.jspa?messageID=1718307
    http://discussions.apple.com/thread.jspa?messageID=1198652
    http://discussions.apple.com/thread.jspa?messageID=1858479
    http://discussions.apple.com/thread.jspa?messageID=594421
    There are a ton of posts in Apple Discussions alone that can help you make a decision or narrow down your options. I suggest searching AD, Google, and any other search engine on the internet. Consumer Reports probably has a review section on new printers, but you can either buy it in the store or buy an online subscription (I believe).
    Jon
    Macbook 2.0 White (100Gb HD 2Gb RAM) Mac Mini 1.42Ghz, iPod (All), Airport (Graphite & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more...  Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..

  • Improvement request for the developer forums(s)

    Is there any way to tweak the developer forum a little so user's can see the proper way to format code when making a post? There is no mention in the help. The Compose tab only has bold, italic, underline, and spellcheck. Somewhere on the *Post Message: New Topic* screen there needs to be something telling the user to use {code} around their code to format it properly.
    I have been trying to inform newer users over there but it gets tiring after a while.
    Thanks.

    Even better - a button on the compose form that would insert the magic goo for us!
    Seriously this is a mess with all of the new iPhone developers coming onto the forms and putting code in their posts and then the responses from the usual suspects that they should use the tags, followed by questions of how do I use the tags,...

Maybe you are looking for