Suggestion for Wish List

With the holidays coming up, I usually find it pretty difficult to think of last minute gift items for friends and family. Itunes should have a way for customer's to share their Itune's Wishlist items with friends and family...Maybe apple or facebook could create an app to link it to facebook. With the customer's permission of course, the customer can install l the app to their facebook page and then other people can buy them the wishlist items they want for Christmas! From movies to music, I think it would be a Wonderful way for Apple to increase their revenue stream as well. The concept is similar to a wedding registry, where if one item is purchased from the wishlist, the other items can still remain open for gift purchases. You can apply the concept to Birthday's, holidays, parties, etc... I really hope Apple can develop something or has this in the works =)

Apple does not have an official presence here. Make your suggestion here: http://www.apple.com/feedback/

Similar Messages

My mini with IOS 7.0.6 is not showing an option for wish list in the options. What is happening?

My mini with IOS 7.0.6 is not showing an option for wish list in the options. What is happening?

The three Rs to IOS, try them in order until the issue is resolved;
Restart - Press and hold the Power button until the red Power Off stripe appears. Swipe to power off. Press and hold the Power button to turn the device back on.
Reset - Press & hold the Power and Home buttons simultaneously, ignoring the red power off slider, until the Apple logo appears. Then release both buttons.
Restore - Connect the device to the Mac or PC with which it is usualy synced and use the iTunes app to restore the device to the factory settings. You can then restore the device with a previously made backup or set it up as new.

Suggestion for mailing list software.

Dear members:
I have been looking for a good application for mailing lists. I wish to create a few internet discussion groups and would like to have them set-up as mailing lists with posts distributed to all members in the form of e-mails.
So far the only I've found that seems up-to-date and reasonably powerful is Listserv from L-Soft (www.lsoft.com). This one, however, is rather expensive (really expensive), requires installation to be done using the terminal with Unix commands (which I don't master) and does not offer a Mac GUI (the program is controlled and maintained using a browser).
I am interested in an application that uses the familiar mac interface (GUI) and can be both installed and run using as a typical mac application. Also I would like to find something that is reasonably priced.
Would anyone be able to offer suggestions on what may be a good application for this purpose ?
Any help will be greatly appreciated.
Thank you in advance,
Joseph Chamberlain

Hi, Tom.
Please forgive me for the delayed response to your post and thank you for giving me some suggestions.
I looked at the page you referenced on your post and found that the only three list server applications listed don't really offer the features I am looking for.
Letterrip hasn't been developed since early 2006 which means it is quite likely that it would not run properly under the latest version of OS X.
Macjordomo is in the same category of outdated software. The latest version available runs on OS X but the entire interface has that OS 9 classic design as something that hasn't been really updated in a long time. As I tried to run it all it did was to keep crashing. The GUI is also deficient and not you typical Mac application user interface.
Last but not least Mailman seems to be one of the strongest one of the group and I had heard of it before. The only problem I have found is its lack of a Mac front end user interface that follows the typical Mac guidelines. I don't have any type of experience with Unix and would not be able to install any applications that require interaction with the Terminal.
As popular as the Mac is today I find it difficult to believe that there isn't at least one good list server application in the market today. I probably haven't found it yet but I am hoping that one exists so that I can find it.
Please let me know if you have any other ideas or suggestions.
Thanks again for your help,
Joseph

Monitor suggestions for Christmas list

I have been using a pair of JBL2600 bookshelf speakers for my monitors. They are OK, but I'd like to get some nice studio monitors in the under $500 range, preferably in the $350-400 range. I am looking for a nice tight bass response. The JBLs I have offer 60Hz - 23kHz. I am told the listed Frequency Response for monitors is not always across the board, so I am now confused. I see the Alesis M1 Active 620 boasts 38Hz - 23.5kHz, but the sales associate assigned to me at Sweetwater suggests the Event ALP 5 which shows 53Hz - 20kHz. I have nowhere locally that I can go and check them out for myself. Can anyone here offer some advice to pander?

I wouldn't pay any attention to specs in this spectrum of the marketplace, as I don't think (given your budget) that you'll get anything that'll deliver real low-ish bass response.
Maybe wait until you could afford some Mackie HR 624 or (even better) HR 824's. Both have great, tight, bass IMO, but I listen and work with rock music, so your mileage may vary, depending on the music you work with.
Within your budget, I have heard KRK Rokits and Wharfedale 5" Diamonds which were nice.
This might help:
http://www.tweakheadz.com/studio_monitors.htm
which contains one of my favorite lines: ...This brings us to Tweak's Law, which says, whatever your monitors are good at is exactly what your mix will be bad at...
Finally, can't you spend some time auditioning monitors somewhere near you with your own material? Monitors are such a personal choice that it's really hard to decide without listening to a bunch of them. If you're located too far from a dealer, at least Sweetwater probably gives you a 30-day return, so you could order 3 or 4 different models and send the least impressive back before you have to pay your credit card bill!

A suggestion for display list if you type an object in SQL Developer

In Oracle document , we always use low-case in our own table name, column name. So our code format is always followed by this tradition. But now if I use SQL Developer, if I type a table, it will display a list for me.But unfortunitely it is up-case. So I can not pick them up, I have to type the low-case one by myself. Can Oracle consider this tradition ?
Thx
this is the example from Oracle Doc PL/SQL User's Guide and Reference:
DECLARE
bonus NUMBER(8,2);
emp_id NUMBER(6) := 100;
BEGIN
SELECT salary * 0.10 INTO bonus FROM employees
WHERE employee_id = emp_id;
END;
see salary, employee, empoyee_id are all low-case!

They know.. there have been a few posts about setting case preferences. Hopefully they will add it soon.

Replacement suggestion for Notes?

i am using Notational Velocity (just awesome) for long lists of things and Reminders for small tasks with the hope that i will integrate Reminders more into my daily routine with location services and my iphone in some way.
does anyone have a suggestion for small /lists/ of items? i would ideally like to be able to sync with my mac pro (which can only upgrade to Lion) and my iPhone.
any suggestions on something quick and light?
thanks

The Apple store sells desktop drives of 1TB and 2TB. But they are generally priced like a "convenience store". Store employees are not on commission, but the prices of their drives are so steep (and unjustified) they may be embarrassed to recommend their own drives, and conflicted about recommending Brand X.
There has been a lot of consolidation in the Hard Drive manufacturing business. But there are very few "bad" drives on the market today. Most drives that you buy will work fine.
Personally, I dislike "Green" drives because they spin down by themselves whenever they feel like it, and there may be a delay in accessing your data waiting for the drive to spin up again. That works for backups, but is not OK for your main drives.
A large overall performance boost can be gained from placing only the System, Library, Applications, and hidden unix files on its own drive, and moving User files to a separate drive.
If yours is a MacBook Pro with a single slot for a notebook drive, not a 65lb tower with four drive bays, there are different considerations.

WISH LIST: Enhancement Suggestions for iPod

1. Add the Search feature to all generation iPods
2. On Sync re-encode Apple Lossless (in iTunes) to ACC 128K (on iPod). My preference is to import all of my CDs using the Apple Lossless encoder.
3. 4.125" Wide Screen
4. Touch Screen with Stylus
5. PDA features
6. Removable Rechargable Batteries
7. Built-in Mic send back recordings to iTunes
8. Built-in AM/FM/HD Radio and able to record them and send them back to iTunes.
What is your Enhancement Request?

Please submit enhancement requests here:
http://www.apple.com/feedback/ipod.html
Apple does not monitor these forums for such content. The best place you can leave feedback or suggestions for Apple is on the feedback page above.

My iPhoto WIsh List for '07

Just sent the following to Apple's iPhoto Feedback; figured I'd post same here just for the heck of it. Many of these feature requests might only apply to my particular (and peculiar?) workflow, but I suspect at least a few of them might strike an empathetic chord...
One User's iPhoto Wish List:
Your first priority is to contact the creators of iPhoto Diet and iPhoto Library Manager, pay them lots of money for their work, and then incorporate all the features of their shareware apps into iPhoto itself.
This would add to iPhoto features it should have had for a long time now, including:
1) An option to delete unrotated originals.
It's silly to take up space on a hard drive with copies of files whose only difference is that one is correctly rotated and the other is not. Give us the choice to dispense with the unrotated ones.
2) An option to delete the originals for any selected file(s).
I know that "always keeping a copy of the original" is a sacred cornerstone of the iPhoto app, but SOMETIMES, after I've edited, resized, or done whatever to a given file, I feel I've created the new master file, and I truly really honestly would like the ability to just dispose of the now redundant original and get the space back on my hard drive.
(If this sounds like giving the user of a "consumer app" too much control, by all means bury this kind of option behind all the Advanced Tabs and all the Warning Dialogs you want -- but please at least give us the option to manage what we ultimately keep or don't keep in our iPhoto Libraries.)
3) Ways to manage multiple libraries on multiple machines with multiple users.
I have a 12GB (and growing) iPhoto Library on my G5 PowerMac. My wife's G5 iMac has a subset of that Library (about half the size), with the same Roll designations, Comments info, and Keyword assignments, along with some of the same Albums plus some unique Albums. I use iPhoto Library Manager to do this, but I should be able to do it using iPhoto itself.
Especially since the introduction of OS X, Apple has encouraged the notion of multiple users on multiple Macs. iPhoto needs to embrace that world view, and make the sharing and management of multiple iPhoto Libraries, even different versions of the same Library on different machines, a fluid, user-friendly, and fully-integrated process. For instance, I should be able to select which images, Rolls, and/or Albums from my Library get copied to my wife's machine (with all Comments, Roll info and Keywords intact) -- AND whether or not those copies include the corresponding original files or not.
Other features iPhoto needs:
4) Ability to correct and change the actual EXIF date/time info.
One example: It is extremely common to get jpegs from other users who haven't bothered to correctly set the date/time menu on their digital cameras. You want to correct that info, but if you do that in iPhoto's Info pane, and then Export that image and in turn Import it into another iPhoto Library, the Date/Time reverts back to the original INCORRECT setting. This is really annoying, and I feel like it's insulting my intelligence. (When I change the date of a photo, THAT'S the date I should now be able to search for by using the calendar mode, NOT its incorrect "creation" date.)
The current workaround of having to export the file, use another app like Graphic Converter to really change the exif data, then re-import into iPhoto (after first deleting the originals), then recreate all your Comments and Album arrangements, is clumsy, time-consuming, and when you think about it, absurd.
PLEASE consider a User Pref to the effect of "Changing Date/Time info changes original exif data as well"? You could have it unchecked as the default; you could have all sorts of "do you really want to do that?" warnings pop up when a user does check it -- but please just give us the option!
5) Better User Pref options.
Give us the choice to NOT create a dupe original when a file is viewed in an external editor but no changes are made; likewise when just rotating an image within iPhoto.
6) Better sorting/display options.
I display my library in Rolls (each Roll being pictures taken on a particular day or at a particular event). I'd like the ability to designate how files are sorted within a particular Roll -- the pictures in some Rolls sorted by file name, the pictures in other Rolls sorted by Date & Time.
Would also like to be able to insert dividers in the Source pane to separate some of my albums into different groups, as well as a way to set bookmarks or placeholders within a Library, as a quick shortcut to an often-viewed section for example.
7) More e-mail attachment options.
Within each of the Small, Medium, Large, and Actual Size choices, there should also be (perhaps under an Advanced tab) a sliding scale of jpg quality, with an instant feedback showing what the total file size will be at that particular setting.
Also, there should be four checkboxes: one for Image Name, one for Date, one for Time, and especially one for Comments -- allowing the user to determine which of those four bits of iPhoto info are included in the e-mail attachment along with the image itself.
8) Option to have Comments included in Captions for online albums.
Those same four checkboxes also need to be options for any kind online album posting. It's crazy that right now I can't put up an iWeb photo page that automatically includes the Comments I've taken the time to enter in iPhoto as part of that photo's Caption online.
9) Option to show file extension in Title
Including or not including the .jpg or .psd or .gif extension is an option when Exporting a file; why not when displaying it as well?
10) Option to "show all layers" of an imported Photoshop file.
Or any kind of layered file which has been imported into the iPhoto Library.
11) Ability to enter partial dates.
It often happens when you import an older scanned photo into your library (or even when you're just sent a recent photo from a friend), you don't know know the exact date and/or time the picture was originally taken. iPhoto really needs a way to enter partial, approximate or estimated dates -- just the month/year without a specific day, for example -- both in the Info pane AND in Batch Change mode.
(Also wouldn't mind a user pref option to display the Time without the seconds.)
12) Ability to Import pictures into an already selected Roll.
There are many times when I'd like to be able to select a particular Roll, then Import some new pics directly into that Roll -- rather than doing the Import, then having to drag the images sometimes several months back in time to drop them into the correct Roll.
13) Ability to delete files from an Album and the Library simultaneously.
This would be some sort of Option-Delete command, where a selected image being viewed in a particular Album is ALSO removed and sent to the Trash from the Library as well -- with the appropriate warning dialog, of course.
14) Built-in support for doing INCREMENTAL back-ups of either your entire Library -- or only the files from selected Albums -- to another hard drive.
I hope that most of these features have already been incorporated into the next release of iPhoto -- and if not, that you'll give serious consideration to implementing them as soon as possible. Your users will thank you.
John Bertram
Toronto

should add ability to scan directly to iphoto.
How would I give this wish to apple?
Note that under the Application Menu (in other words, in iPhoto under the bold Menu item called "iPhoto", right next to the blue Apple icon), there's a selection called Provide iPhoto Feedback. Clicking on that opens your default browser (if it's not already open), and sends you to the specific Apple webpage set up to receive user suggestions for that particular app.
In this case, the URL is the one "Old Toad" mentioned in his post:
http://www.apple.com/feedback/iphoto.html
Many of the major Apple apps have this direct menu link; for others you can just go to http://www.apple.com/feedback/ and navigate from there.
They claim to actually pay attention to this kind of user input; and I've heard people say it actually does affect how the development and implementation of new features get prioritized.
Let's hope so, anyway.

My wish list for 9.0.3

I saw someone earlier this month listed their excellent wish list. The Jdev team responded and that was terrific. I just thought I'd list my growing list so they can see it, although I doubt any of these will make it to 9.0.3, unless they were already slated for inclusion. The list is in no particular priority order, it's just in the order that I encounted the bugs/desires.
1.     Enable mouse wheel functionality. (Fix Bug 2055415)
2.     Want to be able to drag and drop variables into watch window.
3.     Want to be able to right click, and add the variable to the watch list, even though the program is not running yet. Now it only works if you stopped for a break point.
4.     Not have JDeveloper window have its Normal window size reset to full screen upon startup. (Fix bug 1655341)
5.     Code Insight sometimes is hard to invoke. For example, if I have a function, with a bunch of parameters already entered) and I click in the argument list, nothing happens (no popup). If I hit crtl-space, it brings up a huge list of all kinds of things that Im not interested in. What I really want is a way to bring up the list of argument parameters. Apparently the only way to do this is to get rid of all prior arguments and the left parenthesis and retype the left paren. But then if you say, paste in the existing arguments (which you cut to save them), then the argument list pop-up/tool-tip disappears and youre out of luck again. Basically, just have it work like Microsofts Intellisense which seems to know more intuitively what you want and when you want it. They even have a button on their edit toolbar which you can click when youre in an arg list to bring up Intellisense. Id like that button in Jdev.
6.     Want easy way to comment out blocks of code. E.g., highlight lines and hit ctrl-/ and it will put a // in front of each line.
7.     Want to be able to select a line of code by clicking in the left margin (arrow changes directions common in many applications, such as MS Word) rather than clicking and dragging a selection down to the line below.
8.     Want a way to have bookmarks in the code editor. (Fix bug request #1797151.)
9.     Dont have title bars of the various windows in the development environment have double lines across them. This makes it tough to find the proper line that you need to grab (cursor turns into double arrow head) to resize the window.
10.     Upon restarting Jdeveloper, want replacement options (Single, Global, Prompted) to remain what I selected in my prior session.
11.     Would like modified files in the System-Navigator window (System tab) to be in color (e.g. Red) rather than just black italics (not so obvious and hard to see).
12.     When I click inside a method, the name of the method (which you see listed in the structure window) should become highlighted. Currently if you double clicked one method in the structure window and went there but then moused down in the code editor window and clicked in a different function, then the function (that you left) in the structure goes from blue highlighted to gray highlighted (fine I guess but would rather have no highlighting ) but the new method does not become highlighted (my gripe).
13.     When youre going through the code doing search & replace, it should highlight, in the structure window, the name of the method that youre currently in (the place where its prompting you to replace).
14.     When youre going through the code and stopping at breakpoints, it should highlight, in the structure window, the name of the method that youre currently in (the place where its prompting you to replace).
15.     The only way to accept a suggestion from Code Insight is to press enter. It would be nice if you could also use the next logical operator like . (dot). Then the editor should insert the selected suggestion followed by . and start Code Insight again on the next level of the expression. There's already an enhancement request filed for this: #2197394
Gee, its starting to sound like I want JDev to look like Microsoft Visual Studio. A colleague just handed me Microsoft's Visual J++. I'm wondering whether to try it. I'm tempted but I'll hold off for a little bit.

Hi Mark,
Responding to the Code Insight and Code Editor areas:
5. Code Insight sometimes is hard to invoke. For example, if I have a
function, with a bunch of parameters already entered) and I click in the
argument list, nothing happens (no popup). If I hit crtl-space, it brings
up a huge list of all kinds of things that Im not interested in. What I
really want is a way to bring up the list of argument parameters.Code Insight has two flavors. One is code completion, Ctl-space, which shows you a popup list of possible completions. The other is parameter info, Ctl-shift-space, which shows you a tooltip with the list of argument parameters as appropriate. Different hot-keys. They can coexist on your screen when
appropriate (starting with 9.0.3).
Apparently the only way to do this is to get rid of all prior arguments
and the left parenthesis and retype the left paren. But then if you say,
paste in the existing arguments (which you cut to save them), then the
argument list pop-up/tool-tip disappears and youre out of luck again.We've made a lot of improvements to Code Insight for release 9.0.3. It's much stabler than in v9.0. For example, the above problem is fixed for 9.0.3 (assuming I understand your request correctly).
Basically, just have it work like Microsofts Intellisense which seems to
know more intuitively what you want and when you want it. They even have
a button on their edit toolbar which you can click when youre in an arg
list to bring up Intellisense. Id like that button in Jdev.Hmm... we hadn't thought of that. Thanks for the idea. Can't guarantee that we'll implement it, but I'll bring it up for discussion.
6. Want easy way to comment out blocks of code. E.g., highlight lines
and hit ctrl-/ and it will put a // in front of each line.#2175300. Implemented for 9.0.3.
8. Want a way to have bookmarks in the code editor. (Fix bug request
#1797151.)Implemented for 9.0.3.
10.     Upon restarting Jdeveloper, want replacement options (Single,
Global, Prompted) to remain what I selected in my prior session.Implemented for 9.0.3 as an option in the preferences for the Code Editor.
Couldn't find a specific bug number for that.
12. When I click inside a method, the name of the method (which you see
listed in the structure window) should become highlighted. Currently if
you double clicked one method in the structure window and went there but
then moused down in the code editor window and clicked in a different
function, then the function (that you left) in the structure goes from
blue highlighted to gray highlighted (fine I guess but would rather have
no highlighting ) but the new method does not become highlighted (my
gripe).
13. When youre going through the code doing search & replace, it should
highlight, in the structure window, the name of the method that youre
currently in (the place where its prompting you to replace).
14. When youre going through the code and stopping at breakpoints, it
should highlight, in the structure window, the name of the method that
youre currently in (the place where its prompting you to replace).Treating all three as a single request: Any time the cursor moves in the code editor, hilite the appropriate node in the structure pane. This actually did occur to me just recently. Filing ER 2428707 to track this request. Probably won't make it into 9.0.3.
15. The only way to accept a suggestion from Code Insight is to press
enter. It would be nice if you could also use the next logical operator
like . (dot). Then the editor should insert the selected suggestion
followed by . and start Code Insight again on the next level of the
expression. There's already an enhancement request filed for this: #2197394Won't make it into 9.0.3.
Thanks for the suggestions!
--andy
JDeveloper Team

Wish List Updates for Snow Leopard

If you support any of the following, please send them to Apple's suggestion box.
I would like Apple to offer the following settings, preferably without third party fixes. HOWEVER, feel free to respond with your favorite work-around solutions. I need to learn Terminal!
1. Safari - close download window upon completion
2. Safari - remove ALL cookies and cached items when "resetting" same. There are always a select few that have to be manually deleted
3. Safari - have a built in video downloader/converter - Yes there are good third party solutions for this
4. Safari - allow Private Viewing as a default option
1.Pointer options - Create an option in preferences to enable the pointer to automatically go the default option selection (as is possible in that "other" operating system. You know, the one that pirated the window concept)
1. Apple mail - #1 request is identify a way to allow the numerous superior email clients interface as seamlessly with other native apps.
2. Apple mail - short of that, create a setting to turn off or allow a time setting to override an email automatically being marked as read if it happens to be highlighted with you open the app, thereby appearing in the preview pane. Appearing in the preview pane does not mean I have read it.
3. Apple mail - provide an option for creating return receipts requests
4. Apple mail - What it that box that appears around blocks of text in received mail that makes editing more difficult than it should be
5. Apple mail - Provide a tool to apply the formatting to other parts of the email (sort of like the paint brush tool in that OS with the "W" word)
6. Apple mail - If I label a sender as "not-junk" do not put label mail from this sender as Junk. I do not want all senders in my address book.
7. Apple mail - If I label a sender as "JUNK" future mail from this sender should also be JUNK, no?
8. Apple mail - Create a rule that allows "Bounce" as an option
1. iPhoto - I know I must be missing something here, so please chime in -
How or what can I do to save photos into iPhoto when I am not using iPhoto. The most common annoyance for me is saving photos off email attachment or from the web. There MUST be something I am doing wrong. Where is the "Save to iPhoto Library" option?
1. QuickTime - Please bring back QT Player 7!!!
12. I know we mustn’t use "other" browsers, but in those rare events that it happens - how nice would it be to have a native bookmark sync option or common folder?
13. Finder - allow more columns in the viewing options for Spotlight
Please feel free to add to the list.

kurt188
Re: Wish List Updates for Snow Leopard
Feb 12, 2012 9:59 AM (in response to CAPTJON)
So may words, so little help. You do realize that they call this a Support Community, right?
1. Safari - close download window upon completion
Mine already does this, and I'm sure you can do it in Snow Leopard, too.
     When you refer to "mine," what OS are you referring to? Are you willing to share your knowledge on where I might find this capability?
3. Safari - have a built in video downloader/converter - Yes there are good third party solutions for this
That's not the job of a browser, and it's not going to happen. Keep dreaming.
     Thanks again for the helpful advice. I am impressed with our willingness to help.
4. Safari - allow Private Viewing as a default option
You can turn it on yourself. There's also AppleScript, or assigning a keyboard shortcut.
     I am very aware of how to turn it on. I would prefer to leave it on by default. Care to share your AppleScript knowledge?
Apple mail - provide an option for creating return receipts requests
It's been there for years—where have you been?
     Thanks again for the poweruser tip, very helpful.
1. Apple mail - #1 request is identify a way to allow the numerous superior email clients interface as seamlessly with other native apps.
That's entirely your opinion, which isn't shared by the vast majority of Mac users.
     I am sorry I do not share you opinion, nor did I know you speak for the majority of Mac users. Perhaps with your superior guidance I would become a power user too?
Where is the "Save to iPhoto Library" option?
Have you tried looking at the options given to you when you receive email with attachments? There's a Save button in the Header section that gives you the option to save the image to iPhoto.
     And how does this sugggestion help when downloading a photo from the web?
Perhaps if you spent time getting to know your Mac and OS X, you'd find that there aren't nearly as many "issues" as you seem to imagine.
     Yes, and I perhaps if you would share a bit of your superior knowledge I would agree. That was my hope in posting to a "support community." You put a fair amount of effort into your criticism. Just "imagnie..."
Correct Answer

Pre + Wish List: My first 6 suggestions

I have been using my Verizon Pre + for a couple of months and some things have moved up on my wish list. For starters:
1. keyboard control to delete moving forward as well as backward. For example [orange key (now gray)] + [<- ]
2. keyboard control to move cursor through a message?
3. An inline search capability for emails and especially for websites.
4. Sticky thumb... That is suppose you could put your thumb on a webpage or other screen (such as the launcher) and hold it still while doing something else.
5. Double tap to run apps. Some things work too fast and I find I am opening up apps I don't want by accident.
6. A real predictive spell checker. (Meanwhile thanks, Rick, for ACE]
That's it for tonight, but there will be more.

Hello and thank you for using the Palm Help Forums!
Great suggestions but your Pre can do a couple things you listed.
#2 - The device can move through a message. You hold down the option key (blank button below the letter "A") and start moving your finger on the touchscreen while in a text field. It will start moving like a cursor for precision. Also, you can highlight for copy and paste by holding the shift key and moving your finger on the screen to highlight text.
#3 - You want the device to do an inline search for emails and websites. Well, it works partially in your favor. The device has a feature called Universal Search that will search for things on your device and the web. It will search for contact records, applications, and if it cannot find a match it allows you to do a google search (or wiki) on what you are looking for. To utilize this feature, just start typing anywhere on the device (except in a text field) and the device will begin searching. For more information please visit learning.palm.com.
#4 - Hold down the option key and click a link or a picture. You will get options to open the page in a new card, download, share, etc.
With the rest of your feature requests or impovements please visit www.palm.com/feedback to post your information there. You may see some of your wishes come true in a later update.
I hope this helps,
-Pat

Kelby's wish list for LR4 ...

Scott Kelby posted his wish list for LRv4 on his blog today pointing out features, adjustments and tweaks he would like to see in the next iteration of Lightroom ....
http://www.scottkelby.com/blog/2010/archives/11824
Is he on target? Are his suggestions worthy, important and doable?
I must say I wouldn't be disappointed with his vision of what LR4 would be capable of ....

Personally, I'm on a pretty different page.
I could care less about Lightroom's slideshow capability - because I don't use it (I use 3rd party presentation tools after exporting from Lr).
I could care less about Lightroom's photobooks - because if I did use photobooks, I could do it in Aperture or some other 3rd party software.
I could care less about soft-proofing because I don't use it, and if I did, I could always pull the photos into another app that does support soft-proofing.
... I could go on, but my point is that anything that can easily be done at the endpoints of the workflow with another tool is less of a concern to me than the things I do day in and day out, which is Library + Develop, especially Develop.
And Adobe still has some serious image quality matters to address, e.g. Highlight recovery.
I would agree with Scott on these points:
- Networked catalog support (although I don't have need, I understand other peoples need for this).
- Soft-proofing: this is not a contradiction - I acknowlege other peoples strong desire/need for this.
Other stuff I don't use but would imagine becoming big:
- GPS/Location support.
My wishlist:
- Finish what they started being #1 image-quality-wise
    - especially highlight recovery
    - and other hue shift anomalies.
- Finish what they started being #1 performance-wise (read: get the bugs out so the performance for "all" of us matches the performance for the lucky ones).
- Add better color handling and/or adjustment capability.
- Better auto-tone and Active-D-Lighting-like support (fill-light + clarity goes pretty far now, and jjust fixing highlight recovery would be a huge step in the right direction here).
    - Fix 'Clarity' so that one can down-throttle its affect on "already high-contrast" edges.
- targeted adjustments (based on luminance, color, ..., e.g. U-points only better)
    - includes making the auto-mask work better.
- all adjustments available locally.
- Separate channel levels and curves.
- distraction removal brush (e.g. content-aware fill).
- Support for image enhancement via plugin. - once pixel manipulation is integrated with parametric editing (see my #1 wish below) - this will be a fallout - I don't care too much whether image manipulation tools plug into photoshop or lightroom, as long as they are readily accessible in Lightroom without forking a separate photo.
- Full-screen editing with develop panels + library panels simultaneously open on secondary monitor.
- Full access to Lightroom UI via SDK (plugin) - including event notification and having things in the panels.
AND MY #1 WISH FOR LIGHTROOM 4:
- 100% integration with Photoshop and/or other 3rd party pixel editors and plugins - this would include the ability to have multiple shots be considered sub-shots of an HDR image. - If this were done, it would lessen many of the needs for natively supporting things like separate channel levels and curves and all adjustments local. To reiterate: the main goal is to be able to do things presently relegated to pixel editors without forking a new photo, even if internally its handled as a fork - I don't want to have to manage an additional independent photo entity just to remove a twig.
I'm sure there's more, but I gotta go dance...
Rob

Time for a wish list

Hi team,
may I submit here my wish list of nice-to-see-in-the-(near)-future?
1. Copy chart series (take one existing series and duplicate it, so that I can save some boring and error prone typing of similar queries.
2. Accept items like &ITEM. in all graphics related attributes, especially those for X/Y interval/min-max.
3. A grid view with user modifiable column positions so that one can scramble the columns at once without having to submit many times the page to move around one column at a time.
4. X Axis Format (especially useful for dates)
5. Symbolic references for application ID and page number instead of literals when creating chart regions. This would avoid problems when copying the whole page.
All these would have been invaluable while performing a major review of my application.
Bye,
Flavio

Flavio,
Thanks for taking the time to post these suggestions. We'll take them into consideration.
Sergio

ITunes Store Apps (etc) Page Numbers, Wish List For My iTunes Account

Why doesn't the iTunes Store have page numbers under each page of the items (songs, e-books, apps, etc), because with over 200000 apps I will be damned if I am going to go back to the start of each apps category (for example) clicking in increments of 12 apps at a time until I get to app number 7264!!!!!! I WILL JUST STOP USING THE APPS STORE!!!
Some apps have a PRODUCTIVITY button in the left top corner that will take you back to the last apps browsing page you were on, while other apps have a BACK button in the top left corner WHICH TAKES YOU RIGHT BACK TO THE FIRST PAGE OF THE APPS CATEGORY YOU WERE BROWSING, so if you were up to app 734 (for example) you have to click through 64 apps pages JUST TO GET BACK TO THE APP YOU WERE UP TO LAST!!! INFURIATING - BEGGARS BELIEF!?!
WHY CANT I CLICK AN 'ADD TO WISH LIST' BUTTON ON EACH APP PAGE, SO I ALSO DONT HAVE TO BROWSE THROUGH ANOTHER 100 PAGES OF APPS TO FIND THE ONE I LOOKED AT IN MY LAST ISTORE SESSION??????
Hasn't anyone at apple used eBay or amazon???

Update: As of this morning the updates were GONE again, so I'm thinking this may recur on and off until all settles after the launch of new software and iDevices this week.

Last summer I bought a music album from iTunes. I've already transferred all my orders from my units, but somehow iTunes wants me to pay for the same album again. When I try to add it to my wish list it simply tells me that I've already bought that item.

Last summer I bought a music album from iTunes. I've already transferred all my purchases from my units, but somehow iTunes wants me to pay for the same album again. When I try to add it to my wish list it simply tells me that I've already bought that item.
And I've already tried to search for downloadable purchases.
So fact is established, I've purchased this album before but iTunes does not recognize it.
What to do?

Hey sorry for the late response but I've been out of town. I can copy and paste the email responses if necessary or desired, and if it's fixed already this is a moot point anyway, but basically they kept asking me for the order numbers for the two songs I already bought from the specific album I was trying to complete, which I eventually gave them - along with telling them multiple times that the Complete My Album feature wasn't working for ANY album. They gave me two free song codes to compensate me for the two songs I bought, and then told me to go and buy the album at full price, but the ENTIRE TIME they COMPLETELY ignored that I was telling them that this wasn't an issue with one album but was a larger, seemingly systematic issue that other people were experiencing. Even after I got the song codes I emailed them back and said AGAIN that this wasn't an isolated feature, and they just sent me the link to the apple Feedback page (http://www.apple.com/feedback/itunesapp.html) and told me to submit my complaint there. So, technically, my issue was never really "resolved," in that they never fixed the Complete My Album feature that I am aware of - or even acknowledged that anything needed fixing, but I haven't tested it since Sunday.
If it's working for you, then hopefully they fixed it! I've noticed they've updated to 10.4.1, but the notes don't indicate they're fixing anything about the Complete My Album feature, so I don't know.

Suggestion for Wish List

Similar Messages

Maybe you are looking for