Suggestion: Group invitation settings

The Group issue: Some infuriating people invite you to a very very large group that you do not want to be a part of. You attempt to leave the group multiple times but this person reinvites you, or continually calls you. You do not want to unfriend this person, but want this to stop... This is an issue that needs to be addressed. My suggestion is a 'group invitee settings' box, where you, the person invited, has to accept joining said group; and has a setting to automatically reject/ignore* group invites that have more than 'X' amount of people. Perhaps in addition to the above, the ability to ignore* subsequent group requests from the same person for 'X' amount of time after the invitation from said person has already been denied/rejected. *By ignore, I mean you, the user, does not recieve a notification about the invite, but still recieves the message on the profile of the person sending you the invite.

Hi,
Before going further, I need to confirm that our problem is that we edited account lockout policy in the default domain policy in which we configured our account policy and
account lockout policy, but the change wasn’t got applied on three domain controllers. If I misunderstand you, please let me know.
This seems a little bit odd. Here, I have to further confirm that we made the change in the default domain policy, and saved the change. Besides, please check the account
policy of our clients to see what happens there.
Best regards,
Frank Shen

Similar Messages

Cases in which Domain Group Policy settings would be reverted to default settings on a Win7 client

Hi - I'm sure this info is out there somewhere, but I'm having a hard time finding it. Basically, I'm trying to identify the cases in which settings deployed via Domain Group Policy on 2008R2/Win7SP1 would get reverted back to "default settings"
on a Win7SP1 client that is still a member of the domain, and is in a proper OU, properly targeted, WMI filters should still evaluate true, etc...
For instance, it appears that if machine-level registry settings contained within a LocalGPO file on a client get corrupted (C:\Windows\System32\GroupPolicy\Machine\registry.pol), all of those settings, plus all machine level administrative template settings
defined in Domain Group Policy, get reverted to default settings (corresponds with Event ID 1096 in System Event Log where it references "LocalGPO"). I have not confirmed if this is the case for machine level settings defined outside of administrative
templates in Domain Group Policy, or for any user level settings though. (But I suspect not.)
When a workstation is unable to talk to a Domain Controller in order to identify applicable Domain Group Policy settings (for instance, this issue:
http://support.microsoft.com/kb/2421599/en-us), do administrative templates Domain Group Policy settings revert to defaults up until the next successful processing interval? I don't believe
so, but would like confirmation.
Are there any other cases in which Domain Group Policy settings for a client still joined to the Domain would be reverted to defaults?
And when a client is unjoined from the Domain, what Domain Group Policy settings would remain on the client? I understand that some Domain Group Policy settings outside of administrative templates are "tattooed" to the registry. Does
anyone know of a full list of these settings? I believe that most or all of the ones in Windows Settings\Security Settings are tattooed, and the only way to get these settings removed is to explicitly change them via registry edit or LocalGPO/Local Security
Policy, after unjoining the domain.
Any info/insight/links to other doc/etc would be much appreciated!

Hi Shaun,
>>If a client cannot talk to a domain controller at all, admin template settings still stay in-place on the client, correct?
As far as I know, it's not this case. If a client can't communicate with domain controllers, it means that the GPOs applied to the client are out of scope. As suggested by
the article I provided, for native policy, "when a Group Policy object (GPO) goes out of scope, the policy setting is removed allowing the original configuration value to be used."
>>What if a client looses network connectivity while reading Domain GPO?
Group policy will be get updated when computers start up and users log on. Besides, for workstations, group policy will get refreshed at background with by default an interval
of 90 minutes. As long as workstations can restore network connectivity, the group policy settings will get updated.
>>Are there any other failure cases like this where some or all Group Policy settings (admin template or other areas) would get reverted?
There are many reasons which can cause GP malfunction. However, Windows itself provides necessary tools for troubleshooting various issues. When GP malfunctions, we can check
Event Viewer, collect group policy result, or generate group policy log to troubleshoot.
TechNet Subscriber Support
If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
Best regards,
Frank Shen

HT1222 My mouse pointer in finder is not working by double clicking on the application.I have to double click and select open for opening the application.Can you suggest me some settings to fix this problem?

My mouse pointer in finder is not working by double clicking on the application.I have to double click and select open for opening the application.Can you suggest me some settings to fix this problem?

Hi,
Try this ... reboot your Mac and see if double clicking works again.
Also, you can just select the Application you like to open and hold down the Command+O to open.
Also, did you check your setting for the mouse in system preferences.
Dimaxum

User Group Policy Settings not applied to new user profiles at first logon

Good Afternoon,
We have an issue that occurs to a new user when they first log on to their machines. They log on and a new profile creates from the Default User Profile. We can see that a number of our Group Policy Settings applied as "User Configuration" are
not applying.A log off and back on is required before the policies apply.
Any thoughts to this behaviour please?
Regards
LeeB
Lee Bowman MCITP MCTS

Hi,
How about your problem now? How many system encounter this problem? Is all policy couldn't be applied? Is there any feedback when using gpresult to check policy applied status?
As Group Policy applies after user identity authentication, generally speaking, user logoff and back doesn't helpful with this problem.
When this problem occures, have you checked event log if it identify this problem?
Roger Lu
TechNet Community Support

Any applicable\recommended Group Policy settings (Local & Domain) for configuring windows 8.1 "gold master image" for collection

Happy Friday everybody -
I'm working on implementing Microsoft RDS 2012\VDI for the folks here at work. I've read - online - a lot of articles on VDI and RDS 2012 - and have a working model that is working somewhat satisfactorily. I haven't seen much online about steps
I could take in Local Group Policy on my Windows 8.1 'gold image' - or for that matter Domain level group policy - that can assist in creating a better, more reliable/robust Windows 2012 VDI environment.
Anybody out there got any information or opinions or advice on Group Policy settings for VDI environments?
Thanks again, everyone!
Adrian
anr

Hi Adrian,
Thank you for posting in Windows Server Forum.
In regards to your issue you can refer beneath article for detail information.
1. Group Policy Best Practices for VDI Environments
2.Some Basic Group Policy Settings for VDI
Hope it helps!
Thanks.
Dharmesh Solanki

How to use API to trigger JAM group invitation in ABAP coding?

Hi,
We want to trigger a JAM group invitation URL to be sent out in ABAP coding to enable a auto. process at backend. Currently I only know the manual way: clicking invite button in jam group and input user name to find target user and then click send button to send out invitation email.
But question is how to do in ABAP coding to call any API to realize the same action?
Many thanks and Best regards,
Long

As an ABAP developer you can make use of the SAIL Library to integrate with SAP Jam. With SAIL integrating with SAP Jam is as easy as calling a ABAP OO method. SAIL takes care of the communication with SAP Jam and handles user authentication for you.
The lower part of http://scn.sap.com/docs/DOC-55050 contains information for ABAP developers like the SAIL developer guide and the SAIL config guide.

BBM group invitation goes to SMS list folder.

Hi, I have a Curve 8300 with v4.5.0.124 (platform 2.7.0.92) and 5.0.0.57 BBM application. I could not join/accept any BBM group invitation as it goes to SMS list instead of pending list in BBM folder.
What should I do to correct this problem. Thank you.

Hi Siebewok,
Welcome to the BlackBerry Support Community.
Do you have SMS integration with BBM™ enabled for the BBM™ contacts who are sending you BBM™ group invitations? If so, could you please disable it for these contacts and test accepting a group invitation again on your BlackBerry® Curve™ 8300 smartphone? For more information, please see the KB article "How to integrate SMS text messages with BlackBerry Messenger 5.0" http://bbry.lv/HIkUXw
Hope this helps.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

BBM Group Invites

I have a Blackberry Storm 1 and I have been recieving BBM Group invites however everyone elses appears and has a area to join and mine does not. My message shows up as a message and says to click to join but I cannot click. If anyone knows how to fix this could you please help me? Thanks!

Hi,
Make sure you are running the latest version of Blackberry Messenger (BBM). You can go to http://na.blackberry.com/eng/services/blackberrymessenger/ to get the latest version.
Doc

Backup & Restore non-administrators Group Policy Settings

Hi,
I'm trying to setup a few reference images of Windows 7 which will be deployed to our client computers. The baseline Group Policies are configured through Local Group Policies set in the image. I've setup a Master GPO machine on which to build the policies
and test them.
The Local Group Policies have been set for Local Computer Configuration, Local User Configuration and for Local Non-Administrators Configuration. The thinking is that members of the local Administrators group on the computer are unrestricted and still have
the ability to do most things. Users which log onto the computer abide by the more restrictive Non-Administrators Group Policy settings.
Using the "LocalGPO.wsf" script I'm able to backup and restore Computer and User Configuration which affects all users of the machine but it does not backup the Non-Administrators Policies. Is this possible?
After some digging around in the "GPOPack.wsf" files I've found that the Machine & All Users Policies are restored by the "LocalPol.exe" file. This utility has command line switches for '-m' machine and '-u' user. So I'm guessing
that it's not possible to restore the Non-Administrators Policies?
For what it was worth I've tried copying the "Registry.pol" file from "%windir%\System32\GroupPolicyUsers\S-1-5-32-545\User" folder on the GPO Master machine and placed the file in the same location on target computer. A test which had
one value set worked on the reference computer but when the policies were copied form the GPO Master machine, the target computer ignored all the settings.
Any ideas how to backup/restore Local Machine Non-Administrator Group Polices?
Thanks!

Not entirely sure of the specific policies you're dealing with, but you would typically use the Microsoft Security Compliance Manager to create GPO packs that you would then apply using the Apply Local GPO Package task sequence step in MDT.
I'd encourage you to look over the Applying Group Policy Object Packs section of the
Using the Microsoft Deployment Toolkit.docx file in the MDT 2013 documentation for more details.
MDT 2013 documentation can be downloaded here: LINK

How Do You Delete a Group Invite from iPad?

Has anyone figured out how to delete a group invite from iPad-- I removed it from the MAC computer without problem, but the sync with iPad and iPhone retains the invitation on iPad and iPhone. I did not create the group email, just received it. I sync through iCloud only. There iappears to be no way to remove the event directly from either iPhone or iPad when clicking on the event. Delete is not a choice.

You need to either delete it from whatever app you manage you contacts with on your computer or use an iOS app such as ABC Contacts and others.
Matt

EMET 5.0 Group Policy Settings Ignored (Probable race condition with Policy application)

In our deployment, EMET 5 seems to be ignoring group policy settings from immediately after the first group policy refresh post-boot.
Settings are being applied to the computer correctly, and are appearing in the registry correctly, and on boot, a set of Event ID 50 events are logged containing ConfigAppmitGPO (and similar for the other settings) elements with the correct settings.
Upon the first group policy refresh, further eventID 50 events are logged, with empty ConfigAppmitGPO elements.
Investigation with Process Monitor seems to indicate this is a race condition between Group Policy Registry settings being refreshed (which deletes the entries) and the EMET service reading out these settings from the registry (which appears to be triggered
by Group Policy application or by a notification on the registry keys themselves)
This is reproducible on Windows 7 and Windows 8.1.
Is there any way to arrange for settings to be applied correctly at all times, or is this a bug that will need to be fixed in a future update?

We're experiencing the exact same behavior currently. I was starting to think I was going crazy. Glad to know others are experiencing the same behavior.
I've found that using the method from pervious versions to read and update settings from Group Policy, using "emet_conf.exe --refresh" still works, and upon every execution, the event log shows the GPO settings being read and applied. While I welcome the
move to have EMET update from GPO settings without requiring running a separate task, as it stands now in its current condition, it is a step back.
Scott Ladewig http://www.ladewig.com

Need Help - XI 3.1 Send to inbox Group security settings

Hello All,
I need some help on this. I have a few users belonging to a group and they should be able to send emails using 'send to inbox' option to other users belonging to the same group. They should be able to see users of the group that he belongs to and not others, similarly he should see only groups list that he belongs to and not the others. What should be the security settings for this. Any help will be greatly appreciated.
I think I figured out a way to do this for Groups- On the user security of say 'Group1', I set the Everyone to No access, and added the principal Group1 and gave view access. Now Group1 is visible only to members belonging to that group and not others. I have to do this process to all the groups so that Group1 users can't see other groups. But the problem is the user is still able to see the rest of the users (in other groups). I think I can follow the above procedure for the users too but I don't want to do it for every individual user. It's too much work. Please suggest if there is a better way of doing it.
And finally I need to restrict users ability to see the inboxes of other users(even in the same group). How do I do this?
Thanks
Kash

Hello Mark,
Thanks for your help. Appreciated.
Do you know or some one know, how to create at report for Audit purpose of BO 3.1 Universes's Connection, Database type, Network Layer and so on... I want to pull all info in to Webi report which are you seeing in the pictures.
Please see the attached file.

How to install Windows Updates on a 2012 Domain Controller w/Group Policy Settings

Hello All,
I'm having an issue installing Windows Updates on my Windows Server 2012 Standard with AD DS role, acting as a backup DC.
I have Group Policies setup for the Domain Controllers to download updates from my WSUS server but not to install them. When I go to my Windows Server 2003 R2 Domain Controller, I can install updates via the "Install Updates and Shutdown". That
option doesn't show up on the 2012 server. I can see from my WSUS server and the event viewer that the updates are being downloaded to the 2012 server........just no option for me to install the updates.
Am I just missing something or will I need to change the way my Group Policy is setup to allow installs and/or downloads? Any help would be greatly appreciated!
Tony

So I've totally removed the GPO settings for configuring updates on the Default Domain Controllers OU and I can get the Windows Server 2003 Server to get updates from Windows Updates, but the 2012 Server still won't show me how to download or install any
updates. It just states on the log-in screen that there are "Windows Updates Sign in and install important updates".
Well guess what Microsoft! I've signed in and still don't see where I can install updates!!!
I guess because you've set AU=3.
There doesn't seem to be much documented in depth about AU/WUAgent (not in the history of forever), but Lawrence and others in the WSUS forum do cover a lot of related question about the agent and also GP settings.
Lawrence has blogged a lot of detail about the registry settings which are available for AU/WU, and how some of those settings are not practically of any use since WinXP.
So, even though your question isn't about WSUS, the WSUS forum is a great place to visit for help for WUAgent etc.
Anyway, "where can I install updates?" :
on the Start screen, Search for "Windows Update"
or
Settings charm
Change PC Settings
Update and Recovery
Windows Update
or
Control Panel\System and Security\Windows Update
Some further (light) discussion on the "new" behaviour:
http://blogs.msdn.com/b/b8/archive/2011/11/14/minimizing-restarts-after-automatic-updating-in-windows-update.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Two fold question: My music library will not sync, any suggestions? The settings I choose for syncing on the summary screen will not save, suggestions?

I have the new iPhone 6 Plus. I have all the new operating systems. Since I received the phone I have been having problems syncing. I have it set to sync over WiFi. Obviously I have tried doing a hard sync with the phone attached too. However, overtime I tell it to sync, it looks like it is transferring all 4111 songs but then when it gets done doing it's thing it reverts back to what it was when I plugged it in which is only 2000 songs. I am so confused never in my history of Apple products have I had so much trouble. Can anyone help?
My second problem, why won't my settings save? In troubleshooting this problem I turned off syncing over WiFi and switched it to manual. When I plugged the phone in it reverted back to syncing over WiFi. That would normally not happen, the settings you choose stay until you change them. I need some serious help. Suggestions please?

After days of getting frustrated I finally found a solution: Don't use itunes to sync music. After going through pages of possible solutions (restores, syncing albums one at a time, removing all music, deactivating accounts, making a call while syncing and various other things) as well as trying to contact apple support (Which was a joke--They wanted to charge me $19.00 to get help for a problem with their software), I change my Google search terms to "how to sync music without itunes" and I found a program called CopyTrans Manager for free. It only took me a few minutes to add the new tracks to my iphone. It automatically organizes it the same way itunes would and you have the option to make your own playlists. Best of all it synced the first try! Itunes is now dead to me. Now I just have to figure out what I'm going to do with all the free time I have since I'm not going to be spending hours banging my head at my computer ready to throw my phone out the window.

Category Group (Objective Settings and Appraisals)

Hi
How can I create a new category group in the activity "Edit Templates" from the objective settings and appraisals?, The system automatically generates one category group Personnel Appraisals, so we need to create a new one?
This new category group is neccesary for the events appraisals (PE), and the category group that we had in the system is for personnel apraisals.
Somebody can help me to response this question??
Thaks,

Hi Carlos
Try to access transaction code PHAP_CATALOG.
Through this transaction code, you will see all the categories of appraisal templates for personnel appraisals, SAP Learning Solution, recruitment, etc.
Thanks,
Gregg

Suggestion: Group invitation settings

Similar Messages

Maybe you are looking for