Suggestion needed in export/import ODI topology from one machine to other

Hi,
I am trying to export all ODI topologies from one machine(A) to other machine(B).Can I export/import whole topology.While doing the same whether created repositories and existing topolgy in machine (B) would be replaced.I don't want to get the existing things in machine(B) to be replaced.Can anyone suggest on this?

you can always select the Import Mode as 'INSERT' if you don't want anything to be overwritten. Yes, you can export/import the topology, logical topology, execution environment by using the options in the Topology tab(top right corner dropdown).

Similar Messages

Standard report which importe personnel number from one server to other

Dear Hcm Gurus.
Is any standard report exist in SAP Which imports Personnel number from one server to other server which are maintained in Source server ,imported all contents maintained in source server.
e.g An employee is hired in u201C Server Au201D and personnel number is generated internally while we want to imports same employee data with same personnel number in Server u201CBu201D
IS it possible ? if is kindly do help and clarify any standard report which import complete data from one server to other server with all its infotypes.
barket

Hi,
a standard way should be setting up an ALE scenario between the two systems to transfer employee data and keep them updated. This needs a bit more set up than a single report to be run but it is a common way to create HR landscapes where different local HR systems consolidate data to a centralized system.
The other options are valid, too. But I know them more for transfering data for test or validation reasons.
If you could add some more information to the business background of your requirement we could add give a better suggestion which solution to head for.
Kind Regards
Roman

Import local mailboxes from one account to other in the some computer

I need to import local mailboxes from one account to other in the some computer. I have tried copy/paste from one user/library to other, but mail went crazy with permission and even if I changed them manually now Mail can't save the passwords of the mailboxes, so I need enter each time Mail check the mail from the server. Any idea?

You need to let Mail do the Import, and not do this manually in the Finder. However, if you force a reindexing things may get back to normal. This assumes you are not talking about mailboxes in account folder, but rather On My Mailboxes?
To reindex all mailboxes force a reindexing by deleting the Envelope Index. With IMAP or Exchange account, forcing reindexing requires removing the account folder. See:
http://docs.info.apple.com/article.html?path=Mail/4.0/en/14019.html
Ask any questions needed to get comfortable with doing this.
Ernie
Message was edited by: Ernie Stamper

Export schema from one machine to other machine by datapump

can I export 10g schema from one machine other machine (10g) if how
thanks

In the same manner as You ould use expdp/impdp on the same machine.
expdp needed data on one server.
copy dmp file to another
impdp on another server
Read documentation:
http://www.oracle-base.com/articles/10g/OracleDataPump10g.php

Suggestions needed for Export/Import Business Area Problem

I'm trying to export/import a Business Area from one instance to another and I get the following error during import processes.
Database Error - ORA-00001: unique constraint (EUL4_US.EUL4_EXP_PK) violated
The Business Area I'm trying to import doesn't exists in new instance. During the import wizard I've checked refresh existing object and match by identifiers.
I think my target instance has objects with same identifiers, so I went ahead and changed the identifiers in my source, but still problem persists. How can I correct this error?
Thanks

Did you happen to copy the EUL from one database to another before you were importing/exporting the BA?
Discoverer recognizes EULs using unique reference numbers. However, if you use the database export and import utilities to copy an EUL, the new EUL (including its reference number) will be identical to the original EUL. When EULs have the same reference number, EUL consistency issues can arise if you do both of the following:
* If you modify objects in both the original EUL and in the new EUL
* Having modified objects in both EULs, if you then attempt to copy objects between the two EULs using the Discoverer Export Wizard and Import Wizard (or the Discoverer /export and /import commands)
To avoid potential EUL consistency issues, run the eul5_id.sql script as the owner of the new EUL. The eul5_id.sql script gives a new refererence number to the new EUL and thereby avoids any potential EUL consistency issues.
Reference
* How to import an EUL using the standard database import utility
http://download-west.oracle.com/docs/html/B13916_04/maintain_eul.htm#i1008632
For 4i, you will ned to run:
sql> update EUL4_VERSIONS set VER_EUL_TIMESTAMP =TO_CHAR(SYSDATE, 'YYYYMMDDHH24MISS');
sql> commit;
Some similar EUL inconsistencies are documented in:
Note.267476.1 Discoverer Workbook Fails With 'Cannot join tables.Item dependency "" not found in EUL' After EUL Migration, Importing Or Cloning
You might want to check that if the EUL version timestamps are the same.
~Steve.

How to move DB from one machine to other

Hi
We have a Oracle DB Server 7.1.6 running on a HP10.20 box. We are migrating our server to a new box with HP11.x with oracle 8i(8.1.7)
What is the best way to move the database between these two machines with out creating the database, tablespaces etc on the
new machine first. I believe Export/Import expects the database to be created beforehand. Or is there any way I can create
the database on the new machine exactly the same way as in the old box by dumping some data or so.
I really appreciate any info on this matter,
Thanks
Bhamu

Bhamu.
Unfortunately, you are kinda stuck. Oracle 7.1.6 is not supported under HP-UX 11.x and 8i is not supported under HP-UX 10.20 (according to Oracle's HP-UX:Compatibility Matrix: Server). Thus you can't do a simple restore to 11.x or an upgrade to 8i prior to a restore.
The only common versions between the two HP-UX releases are Oracle 7.3 and 8.0, which would allow you to perform an upgrade on 10.20 and a restore to 11.x. (Both of these versions of Oracle are on EMS support.)
The best bet is to perform an export and then an import. The data dictionary would provide you with the information you need to re-create the appropriate tablespaces on the new server.

Exchanging licence.bea file from one machine to other.

Hi,
If we exchange licence.bea file in Home Directory of weblogic 8.1 in one machine to the Home Directory of Other machine.
Will there be any changes that we observe ?
Please if any one tried or know in detail about licence.bea file ,send the Suggestions .
Thanks and regards
Srinireddy

Your license.bea is specific to the IP of the machine. As long as the new machine has the same IP as the old, it should work. At least that is how it works with Solaris.

Exporting/Importing iMovie project from one iMac to another

I have an iMac in my office and need to bring an in-progress iMovie project home to work on it over the weekend. Obviously, the iMac is not portable. : ) How do I successfully export the project from my iMac at work and import it to my iMac at home? I was able to move the "event", but the project itself is blank.
Thanks!

I'm not an "expert" but I helped someone with this before...
http://discussions.apple.com/message.jspa?messageID=9239264#9239264

EXPORT/IMPORT TABLE DATA FROM ONE SCHEMA TO ANOTHER ONE (S.O.S)

Hi,
I urgently need your help:(, I have two different instances, in each of them there are two schemas, A and B; which tables are the same, but I need to transfer JUST the table data from A's tables to B's tables, how can I do so??
Thanks in advance,
Isabel

The total number of tables is 989:(And how many do you want ? If 988, and if you're on a 10g db, you can use exclude parameter from expdp/impdp?
Nicolas.

Copying .jar files from one machine to other in network

hi all,
i want to write one functionality in java.which will copy
one .jar file in one machine to another machine (in network).
we can also say that as ftp transfer. can anybody help me in this.
thank you .
Message was edited by:
priyankap

http://www.google.com/search?q=java+ftp+client

Passing internal table from one program to other without using IMPORT

Hi Experts,
I need to pass an internal table from one program to other. However i cannot use IMPORT/EXPORT due to some reason. Any idea how this can be done?
Warm regards,
Harshad.

hi,
for passing itab from one program to another u can use
IN FIRST PROGRAM WRITE ,
perform pass_data(SECOND_PROGRAM_NAME) using ITAB.
in both the program declare itab with same structure.
if u want to do some changes in that itab and if u want it back in first program then write as
perform pass_data(SECOND_PROGRAM_NAME) using ITAB changing itab.

Import Purchase Requisitions from one Operating Unit to a different Operati

The need is to import Purchase Requisitions from one Operating Unit to a different Operating Unit.
There are 2 operating unit with one inventory orgs in each. But the 1st is OU( It is a club) merely creates Purchase Requisition, and its not a advisable process to have a separate Purchasing process in that OU as it is too small ( but for financial reasons it has to be defined as a separate OU). So we want the Purchase Requisitions created in the 1st OU to be imported in the 2nd OU. Is there any way we can achieve this. Note: Since Order Management is not implemented we cant use the Internal customer setup and we wont like the PO to be created in the 1st OU as we do in standard Intercompany invoicing process.
Any solutions/Pointers/workaround for this.
Regards,
Manoj

As long as you have the same master org in the 2 operating units, all you have to do is
INSERT INTO mtl_system_items_interface
            (organization_code, segment1, transaction_type, set_process_id, process_flag)
   (SELECT '&new_Org', msi.segment1, 'CREATE', 100, 1
      FROM mtl_system_items_b msi
     WHERE organization_id = &old)And run the Import Items request.
Hope this helps,
Sandeep Gandhi

Is it possible to import and export Config Toll Configuration from one sys

Hi All,
Is it possible to import and export Config Toll Configuration from one system to Another system (QUS/PRD), for especific service.
Kindly let me know the pro and corn of it and step by step process
Thanks alot for your time.
Thanks
AB

Yes...It is certainly possible but then you would need to bring OS level j2ee filestructure as well and there are lots of changes at OS level in *.properties file and then at configtool level changes related to hostname, system numbers and port numbers etc.
This is not much difficult but not impossible also if you do it very carefully. Please note that SAP DOES NOT SUPPORT THIS METHOD.
alternatively, you can use sapinst to export-import j2ee filesystem from source to target which inturn would require to do configtool export/import and then changes at configtool level.
Do let us know your requirement so that we cud help you in case you are facing any issues.
cheers !!!
Ashish

[Urgent]How to import odi procedure from 11g to 10g.

Hi All,
I am trying to import odi code(interface/procedure) from 11g to 10g but gettting xml error.
Please reply as soon as possible.
Thanks

Forward compatibility for importing odi artifacts is not supported.

When exporting and then importing Apple Mail from one mac to another I get "Some messages could not be imported. Partially imported mailbox will be labeled IMPORT" . That mailbox does not appear.

When exporting and then importing Apple Mail from one mac to another I get "Some messages could not be imported. Partially imported mailbox will be labeled IMPORT" . That mailbox does not appear.
Any help would be welcome

This is a bug in Mail. The mailbox archiving function does not include attachments, which gives the error with the import. To workaround this you can create a mailbox in Mail and copy to it all emails you want to export. Then go in Finder to [user]/Library/Mail/Mailboxes en select the created mailbox. Copy this to the public directory of your other mac. Then start Mail on that other mac and import the mailbox from the public directory. Should work now.

Suggestion needed in export/import ODI topology from one machine to other

Similar Messages

Maybe you are looking for