Suggestion/Question

I have set up smart lists to makes list of various podcast that I download. I was wondering if it would be possible to get the "release date" option added for smart list and the library. The reason is that last modified date doesn't always work when you are trying to listen to a set of podcasts released and just happened to have been modified on the same date.
If this is possible, then let me know how to do it because I've looked at the options for the columns and "release date" isn't one of the options.
thanks

Filled it out and submitted. Hopefully they will read what I have to say.

Similar Messages

Spry Tabbed Panel 2.0 Suggestions/Questions

I've been starting to play around with the Widget Browser on CS4 & CS5 and I am just noticing a few things that I think need to be looked at.
1. I am starting to understand your process for the UI (I actually never realized that was there at first, but with CS4 version I also have it makes it more obvious). Is there a plan before the final release to allow users to edit text/content within the tabs or panels within the GUI, or will that end up being done with DW only?
2. In the code view for the page, it is laid out with <h2> for the title and <p> for the tags. Wouldn't it make more sense to have the tabbed panels to be <div>'s as opposed to <p> for the sake that with divs, it can be essentially like creating a page within the tab. For instance, you can position elements within a div, add p tags as necessary. I'm just thinking if the tabbed panels will be used by users for more than just text this code should change to accomodate that. I do realize on live code it is being converted back to a <div>, just curious why it is the way it is.
3. Maybe I'm missing this somewhere but is there an option to set the default document type in the Widget Browser or within the import to CS5?

1)
I can't really answer that, so what I would suggest is posting that answer in the correct forums: http://forums.adobe.com/community/labs/widgetbrowser you might get more luck there with finding an answer to your question
I do share the same feelings about this issue, I think allot of users would still love to be able to configure the widgets through DW. But the issue is that the widget browser is based on the Open Ajax Metadata specification which does not include such functionality in to its specification.
Aleast, there is no way for developers to "tell" Dreamwaver which markup they should add to create a new panel or instance. While it would nice to have i doubt its techically possible at this point. But those are just my 2 cents =
2)
The tabbed panel supports of allot different markup. But they can only ship one markup with the Widget Browser. As you will see in the SpryTabbedPanels documentation you can specify the tabs and content panels manually by adding the CSS selector for those in to the constructor of the widget: http://labs.adobe.com/technologies/spry/ui/samples/tabbedpanels2/SpryTabbedPanels2_sample1 .html
3)
There is no way to specify "default" settings for all widgets. As the developer of the widget decides the markup that ships with the widget. As for DW, you can specify the default document type through the preferences panel > new document > Default Document Type ?
While the responses of on these user to user forums by the Adobe product team members might seem minimal this does not mean they do not monitor the discussions that occure here. So it's always wise to speak you mind and let the community and product team know how you feel.
~ Arnout

About to Install 10.5 - Suggestions/Questions?

About to install 10.5 onto two Duo2Core white iMacs. Also going to 10.5.1 on 3 new Macs I just ordered. Other than the usual - backup data, repair permissions, turn off all updates, run no apps - any other suggestions for success in the install of 10.5 and the upgrade to 10.1?
Should I boot into Safe Mode when doing the 10.1 update after installing 10.5?
Also - I've heard but can't get any confirmation that Repair Permissions in 10.5 is very slow. Is that correct? What's the duration? Usually 30 seconds or less with 10.4.10.
Message was edited by: pcbjr

For me, repair permissions is about 10-15 minutes now, even after installing 10.5.1 from the website. It also took 30 seconds in Tiger.
I didn't boot in safe mode after installing Leopard. The install took about 1 hour and was ridiculously simple.
If you have APE products on Tiger, such as Cleardock or Shapeshifter, you MUST uninstall before installing Leopard.
I upgraded about a month ago, having done only the uninstall listed above, and Leopard has worked beautifully for me, except for the increased permissions time.

Email Address Suggestion Question

When I go to type and email it suggests the addresses from all the email addresses (cc'd or otherwise) that I have ever received, even spam.
I deleted the emails and still the addresses are suggested. I deleted the accounts and reloaded without the prior emails and still the addresses are suggested.
This is a total PITA.
Any way to make it so the ONLY addresses that are suggested are the emails that are in my contacts, or people i've emailed before?
Like the old BB software was and 99% of all email interfaces are?
Thx.
JJ

No, those suggested accounts can't be deleted, currently.
And yea, we've tried our bestest to let BlackBerry know we want the option to turn that off.
Doing all you've done won't remove them.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Multi-suggestions/questions/problem: (1)garageBand: working with cycle regions; (2) ToS note; (3) apple user accounts

(1) GarageBand: "Working with Cycle Regions"
Preamble: Cycle regions are very nice. Thank you for recycling the concept. That'd probably be great (unless you argue it'd be 'enabling') to include libraries of scripts that work with cycle regions ('such as' note 1). Thank you for cycle regions in GarageBand.
"'such as' note 1" if C[i] is a cycle region, C[1] is the first take, C[2] the second take...
The ability to select/program different values of i for C[i] emplacements from a controller box, that could accomodate basic scripts that select i values from libraries, or generate them by simple formulas, or generate them by taking values from an "input text document" that could be easy output from basic custom software.
Issue: Basic improvements to cycle region management. Currently, if I want to know what music is in C[i], I have to set the i value from a drop down menu by clicking on the region. If I want to search for that passage, I have to maximially do that n many times (n = the number of cycles per cycle region). One faster way to search would be to allow pasting of sequential +1 iteration-wise cuts from that cycle region, and fast forwarding through that, or whatever. Another way, is that while recording, some visual notification could be present, telling me which take # is being recorded. (Maybe die-hard musicians used to counting don't worry about it.)
(2) Terms of Service Issue
An "email Terms of Service" button would be nice.
Also, a "readers digest" cliff notes version of practical center points would be nice. Such could come with disclaimers that the notes don't necessarily reflect views of apple, although could be popularized "3rd party watchdog sides" that rate applicability of such disclaimers.
(3) Apple User Account
Some third party algorithm generated this user name. I never wrote that in myself. What is that about? Is my account security in some crisis?
Thanks!

Please reply and let me know i if this was helpful or I am missing something. this worked for me and it has been about a week and my backups are still running.

Smart Object Workflow Suggestion/Question

Sorry if this is a noob comment/discussion I have been looking around for more info on this stuff and can't find it.
I really love using smart objects to help me organize my workflow. But I am frustrated at the lack of control I have over how to save my smart object conversions.
There are no settings, that I can find, in preferences where I can tell CS5 this is where I want my smart object conversions automatically saved to. (it currently uses the temp cache folder? I believe thats where it places them.) I would like set the save location in my preference.
It would also be nice to organize the smart object psb files in a folder system similar to the layers in my PSD file. keeping that consistency will allow me to go through my folder system in the same manner I go through my layers.
Sorry if this workflow already exists. I'm having trouble finding any in depth information on saving psb files. hitting export on every smart objects is very tedious.
Here is an example of what I mean
PSD FILE:
FOLDER1
>SubFolder1>
>> image
>> image
>> image
>>>Sub_Subfolder2>
>>>>> image
>>>>> image
>>>>> image
Convert each folder to Smart Object
SmartObject_FOLDER1
>SmartObject_Subfolder1
>>>SmartObject_SubSubfolder2
PSB SAVED LOCATION:
USER SETS LOCATION
C:/whereever/smartfolders/
autosave
files structure:
Directory
SmartObject_FOLDER1.PSB
SUB DIRECTORY
>SmartObject_Subfolder1.PSB
SUB SUB DIRECTORY
>>>SmartObject_SubSubfolder2.PSB
I know I can export each smart object individually but is there a preference function to do this automatically?
Does this exist and I just don't know it?

Check out the PS links panel here:
http://ps-scripts.com/bb/viewtopic.php?t=3045

Questions for requirement collection in IMC Vertical for MM

Can someone please suggest questions for requirement collection for MM in IMC vertical.

Hi
What is IMC vertical?
Reg
Raja

TS3048 I have just purchased a new apple cordless keyboard. The numeric line of keys along the top are not functioning as they should. For example I am unable to get a question mark or a forward slash. I have tried holding down both shift and alt keys.

I have just purchased a new apple cordless keyboard. The numeric line of keys along the top are not functioning as they should. For example I am unable to get a question mark or a forward slash. I have tried holding down both shift and alt keys.

Thanks for prompt response - I tried what you suggested but I'm afraid it has not helped. It seems as though the line of number keys along the top aren't actually doing what is printed on them. Some are OK, but the further towards the right hand side of the keyboard you go, the less predicatable it becomes. So whilst the second key from the left gives me 1 and ! when holding the shift key, by the time I get to the 6 when I press and hold shift I get ^ rather than & symbol which is what is actually printed on the key. The & symbol is actually on the next key along - and when I hit the key with 8 I get * rather than the ( which is printed on they key but actually located on the next key along. Things get even more muddled by the time I am over on the right hand side as rather than a question mark (I have had to type the word as I cannot find the symbol anywhere!) I get this _ and the other symbol marked on the key is a comma, but I get - instead. It is going to drive me mad if every time I want to type something it is a guessing game....! What do you suggest - question mark

How to create a repository(not just custom) using your hard drive

I don't know if many people know about this, so I am giving this a shot. There are three major articles on wiki.archlinux.org: Custom local repository,
Using a CD-ROM as a repository, and Offline Installation of Packages. These are available online through the WIKIs at archlinux.org.
I was first confused because when I was reading "Offline installation of packages", I didn't know what these ".db.tar.gz" files where. I came mainly from a Debian / Ubuntu
background (I actually tried many distros before this), so getting used to the way the repository works and no graphical install manager for it. However, I enjoyed a challenge and
I found out that these are database packages that contain descriptions and locations on where these files are located. The ones on the ftp server are already compiled. I don't know if,
however they are compiled with the most recent versions.
With all that said, I thought you had to have it all in one directory in order for this to work, but as it turns out, location is not really an issue. I decided to have a directory reside on the root.
I chose root because it's only for the install of my own packages. I could have done it as a seperate user account, such as "repos" in PCLinuxOS (another distro I tried). I didn't want to have a seperate account for this. Therefore, I created "/root/repository". Within this directory I created directories for all repository archives. I basically did a "cd /mnt/dvd" and migrated to the particular repository directories. I would copy all the "pkg.tar.gz" files into their respective directories with "cp * ~/repository/<name-of-dir>". For intance, I started with the "core" directory, because there was some things I didn't install in the core directory during installation and if the packages needed it, it was there. This follows for the rest of the directories, such as "community", "testing", and "unstable", etc.You can go to the ftp mirrors to find out what directories are available. The main point is that your files should be in the format ".pkg.tar.gz". These are package files that get converted into a sort of database format that as I mentioned, informs the system the description and where the files are located, and so on.
The command to perform this, is "tar -xvf /root/repository/core/core.db.tar.gz *.pkg.tar.gz". You can replace core with whatever repository you are adding. So, for example, "extra.db.tar.gz" would be in the "extra" directory. This information is located in the "Offline installation of packages". The command to create this database is called, "repo-add".
The format for this command is "repo-add /path/to/dir.db.tar.gz *.pkg.tar.gz". So, if it's the core packages you would "cd ~/repository/core" and "repo-add core.db.tar.gz *.pkg.tar.gz".
Then, you need to edit the "/etc/pacman.conf" configuration file for pacman. I basically would comment all out except for the repositories I need. So, for example "[core]" and "/etc/pacman.d/core" would tell where normally the servers are located for these files. This information is located int the "Custom local repository" article.using the "repo-add" command.
Furthermore, I edited each server file located in "/etc/pacman.d/<repository>" where repository is core, extra, etc. I would perform, "nano /etc/pacman.d/core" for example and comment out all servers. I then add a "local repository" by typing in "file:///root/repository/core", saved it, and then did a "pacman -Sy" to update the repository database. Now, I can do "pacman -S <package-name>" where package-name is whatever I wanted to install. Voila! Please let me know of any suggestions, questions, insights, or comments. I hope I'm not missing anything in this article. I do remember using "rm -rf * in the "/var/lib/pacman/<repository>"directories and using "tar xvf <repository>.db.tar.gz". I don't if that something to do with it, though. Be careful with the "rm -rf *" command, because you can erase your hard drive if you are not careful, for those who aren't informed.
P.S. Please note all these are done with the root user.

pressh wrote:
gradgrind wrote:
smitty wrote:pressh, I understand and appreciate your point of view... well taken! Are you implying that I should have written in steps, such as 1, 2, and 3? Also, should I have got ridden of the redundant information if it is contained in the Wiki article and / or taken out the commands on how to apply them and left only with the explanation? Is this what you imply? Sorry if I seem redundant with these questions, but I'm curious so I can improve for the future. I am new to this and open to any suggestion and comments.
Maybe you could either edit the existing wiki pages where they were not clear to you, or else add a new wiki page, or both. Certainly give the whole a clearer (visual) structure, and (if they don't already exist) add links between the connected wiki pages.
Yes that is partly what I mean. Further you could get rid of the information that is not really needed to follow the guide (for example what the command 'repo-add' does. People could if they are interested look it up in the script itself, or you could add it here and link to it).
And yes a bit of structure would be nice. You don't have to nessesarily call it 1,2,3, as long as it has some kind of structure in it (the visual point is very important here). You could take a look at existing wiki pages on the web and see how most of them (not all of them are good of course) are structured.
That's a good point, too. How do I found out what articles are more effective? I am doing research on this particular matter at the moment and came across articles that have tips on technical writing. Could this help in the long run? Or, is it better to get feedback from other users and improve that way? In other words, do first, and ask later, as one user point out?

Raid Volumes Randomly Dismounting

Okay first a warning .. this is going to be a long post!
Overview: When my raid is connected through my Fibre Channel Switch it randomly dismounts.
Specifics:
Xserve G5 (10.4.7) with the LSI Dual-Channel 2GB Fibre Channel PCI-X HBA & Fibre Channel Utility 2.0
Xserve RAID - Each side with its own Raid 5 , hot spare - no masking & latest firmware
Exabyte Magnum 224 FC
Qlogic Sanbox 5200 Series (12 port) - Latest Firmware (configured with two zones (port not WWN) ; Zone 1: Port 1 HBA, Both Xraid | Zone 2: Port 0 HBA, Exabyte
Background : This used to ALL work! Recently we began to experience drastic slow downs when writing to the raid and common sense not working free space, which was the problem, was the last thing I checked. Before that though I tried swapping cables, replacing the raid controller, redoing zoning, straight connect - Obviously none of this was the issue. *note here: at this point I am using an identical Fibre Channel Card in my Xserve from my G4 - a careless maneuver broke the Apple installed card whilst it was laying on a table.*
When I got things working (made room on the volume) I happened to be in a configuration the circumvented the switch.. raid directly into the host and things , as said, worked fine. The next night I took the systems down to put everything on the switch again to allow a back-up to be ran. Now is when the current behavior begins. Randomly and without recognizable patterns both raid volumes would dismount from the host. Checking Raid Admin shows the volumes as being in order and all lights are green.
This time I fear my switch has gone and after time spent with Qlogic (and zilliions of different configurations) a new switch is sent out in the mean time back to a straight connection and things are working fine. New switch arrives, is configured, and immediately problem persists. Qlogic/Apple suggest the midplane on the raid is bad (even though it works straight through). I happen to have a brand new in box XRAID (with current firmware) so I set that up put in the drives from the old raid and the problem persists again when plugged into the switch. Direct to host things work fine.
So I read some documentation on Apple and Fibre channel and made a few changes to HBA ports and Switch Port Settings and came to the following scenario... Volumes stayed mounted through an entire work day, but after a brief time into a backup the volumes unmounted.
Here is some more specific info about my exact setup as it last failed...
ZONE 1 (zoned by port not WWN)
Switch Ports 0, 1, 2
HBA Port 1 into Switch Port 0
Raid into Switch Ports 1, 2
All ports are identifying themselves to switch as switch topology
HBA port configured as Topology: Point-to-Point, Speed: 2Gb/s
SW Port 0 configed as State: Online, Speed: auto, Type: Detect, I/O Stream Guard: Enable, Device Scan: Disable
SW Port 1, 2 configed as State: Online, Speed: auto, Type: Detect, I/O Stream Guard: Auto, Device Scan: Enable
ZONE 2 (zoned by port not WWN)
Switch Ports 8, 9
HBA Port 0 into Switch Port 9
Exabyte into Switch Port 8
Port 8 identifying as Loop topology, 9 as switch
HBA port configured as Topology: Auto, Speed: Auto
SW Port 8 configed as State: Online, Speed: auto, Type: Detect, I/O Stream Guard: Auto, Device Scan: Enable
SW Port 9 configed as State: Online, Speed: auto, Type: Detect, I/O Stream Guard: Enable, Device Scan: Disable
I realize that some of these settings, particularly those on the HBA are different between ports, but we have tried virtually every combination (I think)
Around the time of the backup job system.log on the host has these entries:
Mar 7 17:55:41 files kernel[0]: FusionMPT: Notification = 5 (External Bus Reset) for SCSI Domain = 3
Mar 7 17:55:41 files kernel[0]: FusionMPT: External Bus Reset for SCSI Domain = 3
Mar 7 17:55:41 files kernel[0]: FusionMPT: Notification = 7 (Link Status Change) for SCSI Domain = 3
Mar 7 17:55:41 files kernel[0]: FusionFC: Link is down for SCSI Domain = 3.
Mar 7 17:55:41 files kernel[0]: FusionMPT: Notification = 8 (Loop State Change) for SCSI Domain = 3
Mar 7 17:55:41 files kernel[0]: FusionFC: Loop Initialization Packet for SCSI Domain = 3.
Mar 7 17:55:41 files kernel[0]: FusionMPT: Notification = 9 (Logout) for SCSI Domain = 3
Mar 7 17:55:41 files kernel[0]: FusionMPT: Notification = 7 (Link Status Change) for SCSI Domain = 3
Mar 7 17:55:41 files kernel[0]: FusionFC: Link is active for SCSI Domain = 3.
Mar 7 17:55:41 files kernel[0]: FusionMPT: Notification = 6 (Rescan) for SCSI Domain = 3
Mar 7 17:55:41 files kernel[0]: FusionMPT: Notification = 5 (External Bus Reset) for SCSI Domain = 3
Mar 7 17:55:41 files kernel[0]: FusionMPT: External Bus Reset for SCSI Domain = 3
Mar 7 17:55:41 files kernel[0]: FusionMPT: Notification = 7 (Link Status Change) for SCSI Domain = 3
Mar 7 17:55:41 files kernel[0]: FusionFC: Link is down for SCSI Domain = 3.
Mar 7 17:55:41 files kernel[0]: FusionMPT: Notification = 8 (Loop State Change) for SCSI Domain = 3
Mar 7 17:55:41 files kernel[0]: FusionFC: Loop Initialization Packet for SCSI Domain = 3.
Mar 7 17:55:41 files kernel[0]: FusionMPT: Notification = 9 (Logout) for SCSI Domain = 3
Mar 7 17:55:41 files kernel[0]: FusionMPT: Notification = 7 (Link Status Change) for SCSI Domain = 3
Mar 7 17:55:41 files kernel[0]: FusionFC: Link is active for SCSI Domain = 3.
Mar 7 17:55:41 files kernel[0]: FusionMPT: Notification = 6 (Rescan) for SCSI Domain = 3
Mar 7 17:55:41 files kernel[0]: FusionMPT: Notification = 5 (External Bus Reset) for SCSI Domain = 3
Mar 7 17:55:41 files kernel[0]: FusionMPT: External Bus Reset for SCSI Domain = 3
Mar 7 17:55:41 files kernel[0]: FusionMPT: Notification = 7 (Link Status Change) for SCSI Domain = 3
Mar 7 17:55:41 files kernel[0]: FusionFC: Link is down for SCSI Domain = 3.
Mar 7 17:55:41 files kernel[0]: FusionMPT: Notification = 8 (Loop State Change) for SCSI Domain = 3
Mar 7 17:55:41 files kernel[0]: FusionFC: Loop Initialization Packet for SCSI Domain = 3.
Mar 7 17:55:41 files kernel[0]: FusionMPT: Notification = 9 (Logout) for SCSI Domain = 3
Mar 7 17:55:41 files kernel[0]: FusionMPT: Notification = 7 (Link Status Change) for SCSI Domain = 3
Mar 7 17:55:41 files kernel[0]: FusionFC: Link is active for SCSI Domain = 3.
Mar 7 17:55:41 files kernel[0]: FusionMPT: Notification = 6 (Rescan) for SCSI Domain = 3
Mar 7 17:55:41 files kernel[0]: FusionMPT: Notification = 5 (External Bus Reset) for SCSI Domain = 3
Mar 7 17:55:41 files kernel[0]: FusionMPT: External Bus Reset for SCSI Domain = 3
Mar 7 17:55:41 files kernel[0]: FusionMPT: Notification = 7 (Link Status Change) for SCSI Domain = 3
Mar 7 17:55:41 files kernel[0]: FusionFC: Link is down for SCSI Domain = 3.
Mar 7 17:55:41 files kernel[0]: FusionMPT: Notification = 8 (Loop State Change) for SCSI Domain = 3
Mar 7 17:55:41 files kernel[0]: FusionFC: Loop Initialization Packet for SCSI Domain = 3.
Mar 7 17:55:41 files kernel[0]: FusionMPT: Notification = 9 (Logout) for SCSI Domain = 3
Mar 7 17:55:41 files kernel[0]: FusionMPT: Notification = 7 (Link Status Change) for SCSI Domain = 3
Mar 7 17:55:41 files kernel[0]: FusionFC: Link is active for SCSI Domain = 3.
Mar 7 17:55:41 files kernel[0]: FusionMPT: Notification = 6 (Rescan) for SCSI Domain = 3
Mar 7 17:55:42 files kernel[0]: FusionMPT: Notification = 5 (External Bus Reset) for SCSI Domain = 3
Mar 7 17:55:42 files kernel[0]: FusionMPT: External Bus Reset for SCSI Domain = 3
Mar 7 17:55:42 files kernel[0]: FusionMPT: Notification = 7 (Link Status Change) for SCSI Domain = 3
Mar 7 17:55:42 files kernel[0]: FusionFC: Link is down for SCSI Domain = 3.
Mar 7 17:55:42 files kernel[0]: FusionMPT: Notification = 8 (Loop State Change) for SCSI Domain = 3
Mar 7 17:55:42 files kernel[0]: FusionFC: Loop Initialization Packet for SCSI Domain = 3.
Mar 7 17:55:42 files kernel[0]: FusionMPT: Notification = 9 (Logout) for SCSI Domain = 3
Mar 7 17:55:42 files kernel[0]: FusionMPT: Notification = 7 (Link Status Change) for SCSI Domain = 3
Mar 7 17:55:42 files kernel[0]: FusionFC: Link is active for SCSI Domain = 3.
Mar 7 17:55:42 files kernel[0]: FusionMPT: Notification = 6 (Rescan) for SCSI Domain = 3
Mar 7 17:55:42 files kernel[0]: disk4s3: I/O error.
Mar 7 17:55:42 files kernel[0]: FusionMPT: Notification = 5 (External Bus Reset) for SCSI Domain = 3
Mar 7 17:55:42 files kernel[0]: FusionMPT: External Bus Reset for SCSI Domain = 3
Mar 7 17:55:42 files kernel[0]: FusionMPT: Notification = 7 (Link Status Change) for SCSI Domain = 3
Mar 7 17:55:42 files kernel[0]: FusionFC: Link is down for SCSI Domain = 3.
Mar 7 17:55:50 files kernel[0]: s3: I/O error.
=======
Then followed by a ton of various I/O errors
=======
Mar 7 17:56:42 files kernel[0]: disk4s3: I/O error.
Mar 7 17:56:42 files kernel[0]: disk4s3: I/O error.
Mar 7 17:56:42 files kernel[0]: disk4s3: I/O error.
Mar 7 17:56:42 files kernel[0]: FusionMPT: Notification = 6 (Rescan) for SCSI Domain = 3
Mar 7 17:56:42 files kernel[0]: disk4s3: I/O error.
Mar 7 17:56:42 files kernel[0]: disk4s3: I/O error.
=======
Finally by media not present errors which end the log
=======
Mar 7 17:56:42 files kernel[0]: disk4s3: media is not present.
Mar 7 17:56:42 files kernel[0]: disk4s3: media is not present.
Mar 7 17:56:42 files kernel[0]: disk4s3: media is not present.
Mar 7 17:56:42 files kernel[0]: disk4s3: media is not present.
Mar 7 17:56:42 files kernel[0]: disk4s3: media is not present.
Mar 7 17:56:42 files kernel[0]: disk4s3: media is not present.
Mar 7 17:56:42 files kernel[0]: disk4s3: media is not present.
Mar 7 17:56:42 files kernel[0]: disk4s3: media is not present.
Mar 7 17:56:42 files kernel[0]: disk4s3: media is not present.
Mar 7 17:56:42 files kernel[0]: disk5s3: media is not present.
Mar 7 17:56:42 files kernel[0]: jnl: dojnlio: strategy err 0x6
Mar 7 17:56:42 files kernel[0]: jnl: end_transaction: only wrote 0 of 8192 bytes to the journal!
Mar 7 17:56:42 files kernel[0]: jnl: close: journal 0x4c21bb4, is invalid. aborting outstanding transactions
Mar 7 17:56:42 files kernel[0]: disk4s3: media is not present.
Mar 7 17:56:42 files kernel[0]: disk4s3: media is not present.
Mar 7 17:56:42 files kernel[0]: disk4s3: media is not present.
Mar 7 17:56:45 files kernel[0]: jnl: close: journal 0x4c21c98, is invalid. aborting outstanding transactions
And that folks is it.. I'm up for any and all suggestions, questions, comments etc.. I'm absolutely desperate here!
Please, please does anyone have any ideas what's going on here.
Thanks,
James Nierodzik

Hi Roger, thanks for the reply.
Throughout the battles I did try cables that were not in the scenario to no avail so I don't think it's a cablling issue though I suppose it still could be.
Well into the backup was last night's failure point.. days previous, when through the switch, it had failed at periodic points throughout the day. I could not tie those periods to greater than normal I/O demand though.
As for cooling the components are kept in a well circulated room that is kept 24x7 at 62 degrees with an alarm on the cooling unit so I am about as certain as can be that cooling is not a factor.

RFC: Introduce new 'Article/Tutorial (Comment) Threads' in the Web Dynpro Forum

Some time ago I've suggested on SCN Support is both forum moderator and most active articles wrtiter
Valery Silaev
SaM Solutions
http://www.sam-solutions.net
Message was edited by: Bertram Ganz
This thread was branched from forum thread: How to print the data of a Model node.

Hi Valery,
thanks for this great idea. Indeed, there is no channel set up to communicate feedback/suggestions/questions to Web Dynpro tutorials or articles in a standardized way.
WebLogs can be commented on the WebLog page itself and they are announced in a special ;\ New Web Dynpro Weblogs which can be opened via the <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d">Web Dynpro Feature2Sample Matrix</a>. Actually the section 'Further Information' lists all related articles, WebLogs etc. These links are regularly updated so that the Sample Description Pages helps to keep all links to valuable information in a central place.
The 'Sample Description Page' should additionally comprise a section <b>'Discussion'</b> with a link to the above 'Article Comment Thread' in the Web Dynpro forum. The reader downloads the material from the sample description page and also finds a link to the related 'Article Comment Thread' there.
For all new articles (which are combined with a related 'Article Comment Thread') the <i>Further Information</i> links could point to the 'Article Comment Thread' (which then itself links to the article) but not directly to the article resource. The reader can then also have look at the existing comments to the related resource. As an alternative the article PDF itself should have a permanent link to the 'Article Comment Thread' in the Web Dynpro Forum.
Please post your comments on this idea.
Regards, Bertram

S/A bridge problem: No object type found for the message

Hi all,
I've been spending days looking into the following problem. I have a RFCXIFile scenario. The R3 system sends data via an RFC to XI and XI post the data as a flat file on a certain server using FTP.
This scenario worked just fine for 1 exception. I could only run this scenario once. The second time I got timeouts when checking the data sent to my RFC destination using SM58. When I reactivated my RFC communcation channel I could again send 1 RFC to the system. All subsequent tries would fail.
I guess this is due to the fact that I use a synchonous call (RFC) to an asynchronous one. Thus the adapter is still waiting for the response from the XI system and will not accept any further new calls from R3.
So I figure let's use this pattern called the S/A bridge. So I designed everything according to guides and examples and I'm quite certain everything is configured right but when I run the scenario I get the following message:
<i> 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No object type found for the message. Check that the corresponding process is activated</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error></i>
It seems that the adapter cannot find any integration process to send the message into!?
I've looked at numerous threads on sdn and tried all kinds of stuff (looked at the cache==> code 0 = OK , tried to reactivate my integration process, checked the interface determination,...), but to no avail. Does anybody has an idea what could be wrong ?
Any help would be greatly appreciated for I'm all out of clues....
Bob

First of all, Thank you for trying to help me out here.
Some answer to your suggestions/questions:
The IP has return code 0 in SXI_CACHE. so that doesn't seem to be the problem.
I've checked the BPM for syntax errors. I doesn't have any.
I've reimported the BPM into the integration directory.
And did a full cache refresh in SXI_CACHE. Return code is (stays) zero, so that's OK.
I've already included the error message from SXI_MONI. It is in the last step ("Call Adater") that the error occurs.
The other steps execute just fine...
The RFC communcation channel accepts the incoming RFC call and puts into the pipeline, so no problems with the communication channel either. the problem is actually when the pipeline is trying to forward the message into an IP trhough the BPE_ADAPTER (according to SXMB_MONI).
Therefore I'm not able to go to into PE, because the workflow is never started. the BPE_ADAPTER does not find any active process for the interface determination i've entered.
So i can not debug the IP in the PE and check container variables, like some of you mentioned.
Maybe some more information about the scenario:
The RFC is called from an R3 system to XI over the interface "CONTROL_RECIPE_DOWNLOAD", which is an imported RFC, with a request and response message type.
Then I got a receiver and interface determination with lead the incoming RFC message to the IP, into interface "XI_ERP_MF_MD_CONTROL_RECIPE_REQ_AI_MI".
This is an abstract synchronous interface based on the request and response types of the "CONTROL_RECIPE_DOWNLOAD" imported RFC.
This interface is used the first step (receive) of my BPM as the synchronous interface to open the S/A bridge.
The message (container var) used in this step is
name: CORREQ
Category: Abstract interface
type: "XI_ERP_MF_MD_CONTROL_RECIPE_REQ_AI_MI"
The interface "XI_ERP_MF_MD_CONTROL_RECIPE_REQ_AI_MI" is an abstract, asynchronous interface based on the request type of the "CONTROL_RECIPE_DOWNLOAD".
Then there are 2 send steps for putting the flat files into place and finally i close the the S/A bridge using message:
name: CORRES
Category: Abstract interface
type: "XI_ERP_MF_MD_CONTROL_RECIPE_RES_AI_MI"
The interface "XI_ERP_MF_MD_CONTROL_RECIPE_RES_AI_MI" is an abstract, asynchronous interface based on the response type of the "CONTROL_RECIPE_DOWNLOAD".
I hope this information gives you guys a better understanding of hte problem.
Really looking forward to see more suggestions and to solve this nasty problem ...
Regards,
Bob

Windows user can no longer connect to my File Sharing IP address

Hello,
Since updating to OS X 10.4.9, Windows users can no longer connect to my file sharing IP address.
I have had no problems when I was using 10.4.8, and I have re-checked both the Windows computer and my Mac to make sure that the file sharing connection should be possible.
I think this may be some sort of firewall / security issue (?) in that the 10.4.9 update has downloaded something which now "hides" my Mac at this IP address. I am unsure how to resolve this problem.
Does anyone have a suggestion? Much obliged, in advance.

Can the Mac connect to the PC?
Have you checked the Workgroup is the same on the Mac
in Directory Access>CIS/SMB?
Have you tried turning off the Firewall for a test?
Has the IP changed?
Hello!
Thank you for the suggestive questions above. I haven't "tested" any of them because I simply became exasperated with the "change" in 10.4.9 and went back to system 10.4.8
Of course, now everything is right with the world and I can once again have my Windows computer connect to my Mac.
Thank you for taking the time in trying to help me -- much obliged.

"Try Selecting a Different Printer or File Type" Error - iPad2 - Officejet Pro 8600 - ePrint error

Greetings...
I just got an Officejet Pro 8600 and I've been trying to get web pages to print using HP ePrint from my iPad 2 (iOS 7.0.6). I go into the ePrint app, go to web page of choice, and then click on my printer option to print. It renders on screen and then throws out the following error:
"Try Selecting a Different Printer or File Type" "Officejet Pro 8600 [5124FC] doesn't support this file type."
I can use ePrint from the iPad to print pictures from camera roll.
This only is problematic when I try to print web pages (I tried amazon.com for test).
I have no problems doing this from my iPhone...only the iPad.
I've tried rebooting device and trying again....same thing.
Anybody know how to fix this? I really want to be able to print web pages from my iPad.
Thanks in advance...
Possie

Hello Possie,
Thank you for the update. I have to say I'm surprised and disappointed that the uninstall and reinstall did not resolve the issue, especially since you can print the page from your iPhone.
I have spent some time researching this and working with my colleagues in HP's Cloud Services and we have a couple of suggestions/questions.
Do you get the same error when you try to print the web page using Apple's AirPrint feature?
Please ensure the iPad is connect to your home wireless network and try to print again.
Please try changing the settings in the ePrint app before printing the web page. Please ensure that the paper quality is set to normal (see screen shot below) and that the paper size is set to letter (see 2nd screen shot below).
Please let us know how it goes.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

F110-Automatic Selection of vendor bank by document currency

We are currently on version 5.0 and have a situation where one company code wants to eliminate the manual input of partner bank type-field BVTYP into the invoice document. The desired objective is to have the system automatically populate the field dependant on the currency in the document. The vendor master has several bank accounts within the same country, but with different bank accounts depending on the currency to be paid. The field has been populated with a representative country designation followed by the currency type. Payment grouping has been tried by creating a new type using the partner bank type. We are not using payment requests at the current time. Optimization has been briefly investigated.
Does anyone know or have exposure on how to get the payment proposal to show the same vendor with the two different bank accounts that are paid from different partner bank types? Since this pertains to just one company code we don't want to create a customized program.
Thank you for any suggestions.

Question for you-Within the banking details on the vendor, which bank is set up first? We have run into a similar problem but it occurs when we have two USD or similar banks and one has details in the bank reference field and the other does not. The partner bank type is not selected in the document and the system will go to the first bank in the queque. The other think I can think about offhand is has some selected the currency as a field within the payment proposal to exclude? This will exclude the currency you have indicated, but this doesn't sound like your issue. I have run accross this at another client in which they had the payment currency specified in the document as one thing and the actual document currency was something else. Sorry I can't be more helpful. Could you give me some details of how your vendor master is set up? Are you using any bank chains?
Regards,
Sara Perry

Suggestion/Question

Similar Messages

Maybe you are looking for