Suggestion to iPad developer: the screen is too bright for an E-reader

Hi,
I have been using kindle DX for reading e-book and newspapers for a year. I bought the iPad and have been using for a week. iPad has many advantages over Kindle in many ways(very fast, zoom-in zoom out, great apps for editing PDF, and many more) however, it lacks the appreciation of the display for reading. *_The brightness is quite too high(even when you try to lower the brightness setting to lowest). When I read WSJ or PDF for a while, my eyes go very very tired. It is fine in the apps like Kindle or iBook or GoodReader where you can adjust the brightness even more._* So you could read with the same light intensity like the kindle or other e-reader. However, it is still very bright in safari or WSJ apps where you cannot adjust even further. You cannot use iPad to read something in the dim light environment with this lowest brightness adjustment.
I made an appointment to the Apple store to discuss about this issue. I also compare the brightness adjustment to MacBook and other device. You can eventually dim the screen even more and more for other device except the iPad. You could also dim the brightness even more for an iPhone. The technical support told me to send a suggestion to the iPad developer so that they can do the adjustment for the next OS Update.
*My advice is to increase the range on the dimmer side of the brightness. You could also add the option to adjust for the contrast. In this case, you will have low light coming out of the device and the character is still crisp by lowering the brightness and increase the contrast of the display. The eye strain problem will be significantly reduced.*
Many of my e-reader colleagues also complain about this issues. So I hope you take this into serious consideration. Please Adjust the brightness range and everything else should be perfect. You could even think about the display like Mirasol display for the next generation of iPad as an option for display rather than only IPS LCD. This will help the e-reader oriented like me to stick with iPad forever
I strongly hope there will be some of these changes in the new OS update. Since you guys want the iPad to be one of the option of an e-reader, then the display and the brightness is very very very important.
Message was edited by: superipad
Message was edited by: superipad
Message was edited by: superipad

I adjusted everything including turning the auto brightness off( like I did for my iPhone ). And you could see that the lowest brightness of the iPhone is dimmer than the lowest level for the iPad. I have no problem reading on the iPhone without that level of brightness either. This is the only reason that I don't like about iPad and the small adjustment should satisfy all my need. I don't see any reasons for returning it.
Moreover, the eyes sensitivity to the light level or brightness for each people is different. It's correct that you and some of my friends do not have difficulty reading with this level of brightness. But some of my friends and I are having this problem in safari and the apps that do not have further brightness adjustment.
The best way for me to avoid this problem now it to alight the iPad 75-90 degree to vertical so that the light does not come directly to my eyes when I use the apps that does not contain brightness adjustment. This way reduces the light traveling to the eyes from iPad. The brightness goes down a bit more. That is why I said just reduce the lowest level to a bit more then everything is great.
I also try the inpicio anti glare to reduce the light from reflection but this does not help either because it produces bad image output and does not filter any light out.
Message was edited by: superipad
Message was edited by: superipad
Message was edited by: superipad
Message was edited by: superipad

Similar Messages

  • When I open my iPad the page is too big for the screen and won't shrink down. The keypad has also become very 'sticky'

    Recently when I open any apps the pages are too big for the screen. They shrink when pinched but immediately become bigger again. It's very difficult to scroll too. The keypad has become very sticky. Missing letters and spaces when I type and needing to tap the keys much harder than usual

    I have the exact same problem, I think.  I was on my iPad 3's home page swiping R-L to locate a certain icon when all of a sudden the screen appeared to get HUGE.  So big I could only see one or two icons.  I couldn't even turn it off to try a reboot because after I pushed the sleep/wake button, I couldn't find the red slide bar.  I finally just had to wait for the battery to die, then recharge it, and it looked normal again.  I also spoke with several friends who haven either iPads or iPhones, and they've all had this happen to them.  I checked my accessibility settings, and Zoom was already off.  So what is causing this problem for so many people, and what can we do to prevent it?  Please help.

  • I tried to download an app for the iPad and was told the file was too large for the iPad; so I tried to download it on the MacBook but it never showed up; any suggestions? PS, I got the receipt from iTunes store so it was paid for

    I tried to download an app for the iPad and was told the file was too large for the iPad; so I tried to download it on the MacBook but it never showed up; any suggestions? PS, I got the receipt from iTunes store so it was paid for

    FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
    For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
     Cheers, Tom

  • OS10.3.1 a disaster! Among other things, the dsplay is too large for screen

    I do not like OS 10.3 ! After my Z10 was updated to 10.3.1.1779 about a month ago, I access it because the password entry keyboard displayed for about 1/10 sec leaving a black screen.
    After a device reset the device the keyboard remained visible but did not respond to touches (actually it did respond randomly to some). Finally another reset gave me a usable keyboard.
    But the device always opens with an icon display about 20% too large for my screen and requires several shrink attempts before the proper size displays. Each attempt simply bounces back to the oversize state.
    Unfortunately, this also happens with every app (including "Settings") opened. Yesterday, I couldn't return to the main of Settings because the sub-page wouldn't shrink to expose the "<' button - a close and re-open was the only way to get back to the main page.
    Other points I hate about the OS: I've noticed my active wallpaper (not custom but from 10.2) is not listed in the the new 10.3 wallpaper list and since I don't know where its stored I can't try one of the newer ones without giving up on the present wallpaper.
    The date displayed on the home screen is too faint to be read with my wallpaper. I know there are some people who think black on black is cool; they obviously have great eyesight. The new 10.3 compass is now totally useless and the new clock is not much better but is at least still usable by a change to a digital display.
    I recently tried to check the time on a sunny afternoon and gave up because I couldn't make out the white lines on the black background. I find the stupidity of black on black unfathomable and in over 40 years of software development I have never seen something as wasteful of engineering time as products with poor user interfaces (i.e. black on black). Why can't these apps offer the user the ability to change the colour?
    The calculator has also regressed. Again all black (cool!), though that's not the issue here. For the longest time I thought it no longer supported scientific operations until I accidentally got a lucky swipe to bring it into view.
    However, the requirement of a half-dozen swipe attempts for each display change reduces this app to a space waster or only to be only useful for simple operations and units conversion. I'm going to try a reload of the OS but unfortunately that won't improve the apps.
    Is this standard procedure that Blackberry destroys all (blackberry) apps of the previous version with new ones at each update and offers no way to get back or protect against such changes?

    Hi All,
    I have already checked below configuration T-Code Value :
    T-Code : OBA0 :
    Tolerance for Groups of G/L Accounts in Local Curre :
    Debit posting : 0 TWD, Percentage 0 %
    Credit posting : 0 TWD, Percentage 0 %
    T-Code : OBA4 :
    Upper limits for posting procedures :
    Amount per document : 9,999,999,999,999
    Amount per open item account item : 999,999,999,999
    cash discount per line item : 1%
    Permitted payment differences :
    Revenue : Amount 100,    Percent 1%,  Cash discnt adj. to : 100
    Expense : Amount 100,     Percent 1%,   Cash discnt adj. to : 100
    I don't understand when AR open item amount is USD 100.3, and incoming payment 101.12, The system can auto clearing by current configuration, but change the AR open item amount to USD 0.3 and change incoming payment amount to 1.12, The system alert error message "The difference is too large for clearing". The same system configuration and the same "Not assigned" value in choosing open item screen, but produce different results!
    How should i change the configuration?
    Best regards,
    Eric
    Edited by: Eric  Yang on Sep 12, 2008 2:12 AM

  • My iPhone 4S LCD screen is too bright,playing with brightness feature doesn't help.The colors have lost their vividness

    My iPhone 4S LCD screen is too bright,playing with brightness feature doesn't help.The colors have lost their vividness

    Definitly sounds like a physical issue with the phone. I suggest you go to your local Apple Store or Apple Authorized Service Provider for help.

  • Computer recognizes iPad but the screen is black

    My computer recognizes my iPad but the screen is black/blank. I can sync, restore, etc, the iPad appears that it is functioning except that the screen stays black/blank occasionally you can see the backlights come on when you press the home/sleep/wake button. I have preformed hard/soft resets and restored the ipad with no success. Any suggestions?

    All iPads should still be under the one-year warranty. Presumably you have done something to your iPad which voided the warranty?
    Apple will still repair your iPad for a charge. There are also other repair shops who can fix it.

  • I have a first generation iPad and the screen went completely green on me and locked up.  I was able to unlock it, but now there's a green haze all over the screen.  Anyone know what the issue could be and how I can get it fixed?

    I have a first generation iPad and the screen went completely green on me and locked up.  I was able to unlock it, but now there's a green haze all over the screen.  Anyone know what the issue could be and how I can get it fixed?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Out-of-Warranty Service
         If you own an iPad that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will replace (Apple doesn't repair) your iPad with an iPad that is new or equivalent to new in both performance and reliability for the Out-of-Warranty Service fee listed below. (The replacement will most likely be a refurbished iPad in a brown box, however, it has a new screen, back and battery.)   
    iPad model
    Out-of-Warranty Service Fee
    iPad mini
    $219
    iPad 3rd, 4th generation
    $299
    iPad 2, iPad
    $249
    A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in US dollars and are subject to local tax.
    Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPad that has failed due to contact with liquid may be eligible for out-of-warranty service. See http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/
    You may can get the iPad repaired at 3rd party repair sources for less $, however, any remaining Apple warranty will be voided.
    iPad Repair & Screen Replacement Services
    http://www.ifixyouri.com/16-ipad-repairs
    RepairZoom iPad Repair
    http://www.repairzoom.com/ipad-repair.html
    Mission Repair
    http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
    iGadgetResQ
    http://www.igadgetresq.com/ipad-repair/
     Cheers, Tom

  • I tried to export photos from iMac to iPad using a USB flash drive.  The photos are on the drive but when I plug it into the iPad, the iPad says the device requires too much power.  Any ideas of what type of USB flash drive I should use?

    I tried to export photos from iMac to iPad using a USB flash drive.  The photos are on the drive but when I plug it into the iPad, the iPad says the device requires too much power.  Any ideas of what type of USB flash drive I should use?

    You can transfer photos outside of iTunes. I do it all the time. THat said, i have a 50/50 success rate with them. I'd avoid sandisk and kingston, their bundled software triggers the 'too much power' warning.
    I've had mixed luck with lexar, some work, some don't.
    I did have good luck with an older 4 gig geek squad one.
    Look for drives without software on them, without bright LED lights and I haven't gotten any larger than 4 gig to work, but that may just be me.
    For a less troublesome way? h onestly, I use a SD card that I've formatted with the DCIM folder. I've never had one of them trigger the 'too much power' warning. Just make sure they're not SDXC. those don't work.

  • I fainted and fell while holding my iPad and the screen cracked; it still works fine. It's just cracked. I have had this iPad for less than a year so it is still covered under warranties. Does this apply? If not how much to fix the screen?

    I fainted and fell while holding my iPad and the screen cracked; it still works fine. It's just cracked. I feel horrible, it was a gift from my brother. have had this iPad for less than a year so it is still covered under warranties. Does this apply? If not how much to fix the screen? Please help

    If you want a short list of third party repair options, here you go.
    iPad Repair & Screen Replacement Services
    http://www.ifixyouri.com/16-ipad-repairs
    RepairZoom iPad Repair
    http://www.repairzoom.com/ipad-repair.html
    Mission Repair
    http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
    iGadgetResQ
    http://www.igadgetresq.com/ipad-repair/

  • I dropped my ipad and the screen blacked out and could not be turned on even after pressing the sleep and home button

    I dropped my ipad and the screen blacked out and could not be turned on even after pressing the sleep and home button.
    I tried connecting the device to my computer and itunes said that it could not identify my device.

    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • How do I get to the info to send in my Ipad because the screen is cracked?

    My dog chewed on my Ipad and the screen cracked. I just want to know how to get to the info to send my Ipad in to get it fixed. Help!!

    https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • I install latest update from my ipad 2, after the upgrade tablet running slowly. Probably the system requirements too high for my device. I think that users with older models should be able to install IOS 6.x.x on their devices or consider buying devices

    I install latest update from my ipad 2, after the upgrade tablet running slowly. Probably the system requirements too high for my device. I think that users with older models should be able to install IOS 6.x.x on their devices or consider buying devices from other manufacturers ...
    People are dissatisfied with the new update a lot, including some of my friends and acquaintances. Is it reasonable to wait until Apple implements the possibility to return to Ios Ios 6 to 7? And how soon it can be done?
    Sorry for my english, i am from Russia.

    I have a similar issue. I recently purchased an iPad Mini, and I started off by backing it up from the apps I had on my iPhone. Now, I have a number of apps that never downloaded and that I don't want on the iPad. Some of these are apps that I don't need, while others are the iPhone versions of apps. There are something like 23 apps that I have no use for, but iTunes tries to install every time I connect. I've also tried clicking the 'Will Install' buttons. There's no way to delete these apps from the iPad without first installing them, as far as I can see, and there's no way to NOT install them, in iTunes.
    It''s not just annoying, it's causing problems with installation of larger files and movies. Now, every time I sync to the computer, I get a warning that I'm over capacity by 580 MB, and larger apps will not install! Clicking Revert and a bunch of other things doesn't work, either. And I can't just delete some of the apps, because I or my wife use them on our phones!

  • HT4623 I have an appt at the leawood, ks office tomorrow at 1:30 I need to cancel due to car problems.  I have rescheduled but can't find where to cancel the thurs appt.  i dropped the ipad and the screen is blue

    I have an appt at the Leawood, KS office tomorrow (thurs at 1:30 pm) I need to cancel due to car trouble.  I rescheduled for friday but can't find how to cancel the appt tomorrow.
    I dropped my ipad and the screen is blue

    These are user forums. You aren't speaking to Apple here. We don't make nor reschedule nor cancel appointments. Call where you made the appointment.

  • I can't unlock my ipad 2-the screen is frozenand I can't type in my password, can't shut it off and can't connect to itunes because I need to unlock it-which I can't..PLS. help!  Thanks!

    I can't unlock my ipad 2-the screen is frozenand I can't type in my password, can't shut it off and can't connect to itunes because I need to unlock it-which I can't..PLS. help!  Thanks!

    Try this.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • Can not turn of my iPad. The screen is locked

    I have an iPad. The screen is locked.  There is a box saying that the iCloud security copying has not been done for the last 22 weeks.
    When trying to turn off the iPad, nothing happens. The box is there and the red arrow saying "shut down", but nothing happens, the iPad do not shut down.
    There is still 1,6 GB storage left.
    I have a MacBookPro and an iPhone and here everything is functioning.
    Hope sombody can help me!
    Ann-Mari

    Reset. Hold down Power and Home button until Apple logo appears. Ignore "Slide to Power off" message.
    Then go to Settings>iCloud>Storage and Backup>Backup now.

Maybe you are looking for

  • How do I run a workflow when a folders contents have changed?

    Im a noobie to automator but slowly have been tapping into the usefulness of this new program. Ive created a simple workflow to add mp3 files ive downloaded into itunes which looks like this: 1. Get specified Finder Items (ive selected a drop box on

  • What can I expect with 4.1

    I want to build a fast computer - i7 with 12 gig of ram... fast drives...etc. I will shoot HMC150 AVCHD and transcode to NeoScene. I'm wondering about rendering... Will I be able to add a few filters such as Color Balance, Picture in Picture, Title w

  • Services for Object (GOS) Attachement List not showing after attachment

    Hi All, I have created a new entry for the Generic Object Service List and this links to a copy of the CL_GOS_SRV_ATTACHMENT_CREATE class (Create attachment) with some additional logic. However, after attaching a file, the "Attachment List" does not

  • BPC 10.0 - Automation of UJBR at BW layer?

    Dear All, In BPC 10.0, I am performing back up and restore for environments at BW layer(using UJBR). How can I automate this execution? I believe this is coming under the scope of BW admin. However, I wanted to know how this is being accomplished...

  • Model 2 architecture only works with forms?

    Hi, I want to implement model 2 architecture for my application i have model as java classes, Controller the servlet and JSP the view. I want to know if this architecture is only for forms?. I want to implement for a event like when a hyper link is c