Suggestion: User Interface(UI)

Hello Everybody!
Not long ago I found a chap online who has done incredible work by reinventing the current iOS user interface making it way more easier to use.
Ha made a short but very well-presenting video for his project. It's wonderful.
I fell in love with this concept and I would like to suggest Apple to use ideas from this conception because
it's simple
it's just works
YouTube: https://www.youtube.com/watch?v=jRzSf8T5BAE
Vimeo: https://vimeo.com/49088497
Give it a look guys.
Cheers,
Gallagher

Tell Apple.
http://www.apple.com/feedback/iphone.html

Similar Messages

UI (User Interface) text size and colors

Recent versions of Elements (7, 8, 9) have changed to a user interface which is predominantly shades of gray and black with few if any user options for color or font. The font size cannot be altered because Adobe use their own pixel-based font which is not compatible with Windows Desktop settings. So on many flat screens with high resolutions the font becomes almost unreadable. The upper case 'E' in the menu bar Edit for example, is a mere 2.03mm high on a 22" display at 1920x1080 resolution.
This has been mentioned a number of times over these releases to no avail, but at last there may be a change on the way for PSE 10 (later later this year?).
So if you feel the gray/black UI needs attention I suggest you visit
http://feedback.photoshop.com/photoshop_family/topics/my_eyes_need_help_with_photoshop
where there are a number of comments. This is monitored by Adobe so may influence the next release. The more request there are I suspect the more likely some action. Adobe have already commented: "The amount of conversation that this thread has generated among Elements customers was unanticipated." on the thread.
If you wish to place a comment you will need a Photoshop Account and to be logged in. If you didn't create an account when you installed the product then just click Create Account at the top of the link above.

Font sizes are hard-coded in teh apps and there is no way to change that. The new CC versiosn support high-DPI displays and resolve those issues (mostly).
Mylenium

How to add a new Field to the WEB User Interface in CRM 2007

Dear experts,
I have been struggling to add a new field to the (CRM 2007) user interface from available fields for a specific view.
I have maintained settings in BS__WD_CMPWBàRuntime Repository editoràComponentàViewàConfigurationàNew ConfigurationàAvailable FieldsàField Propertiesàand save.
But the field is only appearing in display mode in the Web UI, which doesnu2019t allows any user input.
I need your help to resolve the issue, I would be grateful if you could provide step-by-step documentation with screenshots or any other kind of documentation.
Each suggestion will be appreciated.
Best regards,
Raghu ram.

Hi Raghu Ram,
I think you added a new custom field using some method like EEWB etc.,
Then, you are adding the field onto the UI using UI Configuration Tool .. right ?
These are the steps to diagnose:
Method 1.Check the field properties in the model browser first.
It should be showing 'C' i.e., CHANGEABLE. If it is showing as 'R', it is only READABLE.
In such a case you need to find a BADI to change the field properties.
For example, in Marketing Applications OBJ BADI has a method CHANGE FIELD PROPERTIES for this purpose.
Method 2. Debug and check what is the value coming for RV_DISABLED parameter in the GET_I method in BSP_WD_CMPWB. This should be FALSE.
Method 3. Check what are the field properties in the UI Configuration tool.
Make sure it is not a display only field.
Regards,
Masood Imrani S.

Freeze problem in user interface initiatilisation after all NVDIA update and 8.0.1

I just received Pre 8 and installed it
When starting the various modules
- Organiser works more or less fine (it crash when it looks at my folders with 28000 pictures), but it works when doing import folder by folder
- but when I am starting a new project
I never get to the user interface of the software
I get a small red dot and when clicking problem with your driver
I have already looked at the forum
updated at NVidia site
I am running a
Dell Inspiron 1720
Windows 7 , 64 bits, French
4 GB RAM
NVIDIA 8600 M GT
latest NVIDIA driver from July 2010 (version 258.96)
Installed PrE 8 French from the DVD
upgraded to 8.0.1 from the Adobe website
I can not use any of the software function as the screen is fully black and I only see the top level menus
theoptions are availalbe but non of them is working
and the message atbottowlefttays at user interface initialisation
Thanks

I've never set Portuguese, so I really don't know what to tell you. It would be my presumption, though, that this sort of feature would be handled in the World-Ready Composers, but clearly there is either a bug or I'm mistaken, or both.
I would suggest you file a bug report at Adobe - Feature Request/Bug Report Form, though I doubt there will be a fix.

User Interface (UI) Too Small on InDesign and CC Suite

I have a 27″ IMac running Yosemite 10.10.2. Its native screen resolution is 2560×1440.
When I opened CC Indesign 2014 for the first time I was shocked to see that the tools and rest of the user interface were SO SMALL that I was having tremendous difficulty seeing them clearly. I'm talking 5 and 6 point type!!! And the icons... minuscule!
I lowered the resolution of the display, but type then becomes fuzzy. I searched the web and found that there were others who were having the same problem.
I find it hard to believe that a company specializing in software for the design/creative community would overlook something as CRITICAL as size of the graphical user interface and its customization to work optimally on different platforms and with different display sizes and to satisfy the particular needs of each user.
The UI obviously greatly impacts our working speed and facility.
I called Adobe and their tech support could not help. I called Apple and got the same.
I've been a graphic designer for over 20 years. Frankly, at this point, I find the suite UNusable (I took a quick look at Photoshop and Illustrator and the same issue applies).
This is just unbelievable! Anyone out there have an answer?
Someone suggested we should repeat our complaints INDEPENDENTLY in the general forum instead of them being buried on one thread. GREAT IDEA!!

CC 2014 has a Expermental Preference you can use to increace the UI size 200% for High resolution displays

How to get the user interface in english ?

Hello
I have installed SQLdevelopper 1.5.5. The user interface is in french (probably because my PC is in french). I would like to switch in English; How to do ?
Thank you !
Christian

-K- (!),
I followed your suggestions and it works well now. Do you know why I prefer to see the UI in english ? Because the help and everything else (documentation) is in english making very difficult to find in the french UI what is referred to in the english on-line help.
Merci de votre aide !
Christian

Regarding user interface in LINUX for smartforms

Hi Friends,
we run SAP on Linux platform.. we encountered a problem that , when we open SMARTFORMS Tcode and create a new form, it says that the user interface for the function is not supported by the OS..
what is the remedy for this..

hi sundar,
SAPGUI for Java (on Linux) haven't supported SMARTFORMS yet. SMARTFORMS only supported on SAPGUI for Windows for now.
Some people suggest you to use wine for emulation of SAPGUI for Windows on Linux.
ardhian
http://ardhian.kioslinux.com
http://sapbasis.wordpress.com

Reading the output values after each step executes in LabVIEW User Interface

Hello all,
Development environment: TestStand 2010 SP1 and LabVIEW 2010 SP1
Problem: is there a way to execute the subsequent steps programatically and get the output values from each of them?
I have already extended a little bit a Full OI interface for TestStand to load up any sequence, choose some of the steps and run them step by step (something like option to Run Selected steps). What I am trying to do is to add some actions between each step and do that in User Interface (I can't modify the sequence!), so I am starting the NewExecution with some previously configured InteractiveArgsParam and set an option breakAtFirstStep to True. Afterwards I am just doing something like Step Over when debugging the sequence and this works good, but I didn't fine a way yet to read the output values from the steps...
Then, if I wait until the execution finishes I can read my Results by processing the ResultObject, but this works only after finalizing of the test sequence. Since I wanted to stop after each step, read the values, do some actions and continue to the next step I tried to register an event callback for Trace of Execution View Manager. I can see that after each executed step this event is triggered, but when I try to read a ResultObject returned in Event Data it is not filled with values (ResultList seems to be empty?). Is it a proper behaviour or maybe I am doing the readout in wrong way? (It is the same VI as for reading ResultObjects after sequence finishes and there it works fine for arrays, containers and other data types).
Like I mentioned I can't modify the Test sequences, I can't add a UImessages.
What are my options? Should the trace event returns all output values from each steps or is it just used for status checking? Or maybe there is completely different approach to that matter?
Thanks in advance for any suggestions,
Best Regards.
CLA, CTD, CLED @ Test & Measurements Solutions Poland
Solved!
Go to Solution.

Thanks for your replay, I have tried to build it in my LabView Block Diagramm, es seems like this image.
But the variable GetNumSubProperties ist always 0. Why?
PS: I need only the variable "Step.Result.PassFail" from the last step, do you know, how can I get it? I think, it is maybe easier than read all the "Result".
Attachments:
ReadStepResultInLabview.JPG ‏39 KB

Is it possible to provide a custom user interface in Formscentral?

I am new to formscentral and am attempting to transition a city of of pen and paper and into the 21st centrury filling out vehicle accident reports in formscentral. I have gotten everything to work properly with one exception- how can a user interface be set up to show a drawing of how two or more vehicles colide within the form?
Right now they draw the collision with pen and paper. All the other data points have been successfully incoporated into the Formscentral environment, including electronic signature. I need them to be able to move a couple of cars around on the screen and show us how they collided.
Any suggestions?
Thanks!

Hi,
Thanks for asking. FormsCentral is not currently support this workflow. A suggestion here is to use the attachment field to attach the drawing to the form.
Hope this help,
Perry

Filter on product search in SAP CRM 2007 User Interface

Hi Experts,
I have the following requirement: we need to have the possibility to filter the Products in the Product search in the user interface based on the User's sales organization. Meaning that, if a user belongs to Sales Organization A, he will be able to see ONLY the products belonging to sales organization A.
Can anybody of you Experts, suggest a way to implement this via standard SAP and not via an enhancment if possible?
Thanks in advance to all of you.
MC

Hi Michele,
maybe have a look at BAdIs COM_PRODUCT_SEARCH and COM_PRODUCT_SE. Did not try them myself but they are for enhancing searches in product.
cheers Carsten

How can I improve the response time of the user interface?

I'm after some tips on how to improve the response time to mouse clicks on a VI front panel.
I have data acquistion application which used to run fine, but after spending a couple of weeks making a whole bunch of changes to it I find that the user interface has become a bit sluggish.
My main GUI VI has a while loop running 16 times a second, updating some waveform charts and polling about a dozen buttons on the front panel.
There is sometimes a delay (variable, but up to 2 seconds sometimes) from when I click on a button to when it becomes depressed. I have wired the iteration terminal of the while loop to an indicator on the front panel and can see that the while loop is ticking over during the delayed response to the mouse click, so I know that the problem is not that the whole program is running slow, just the response to mouse clicks.
Also, just for debugging purposes, I have indicators of the iterations of all the main while loops in my program on the front panel, so I can see that there are no loops running abnormally fast either.
One thing I've tried is to turn off multi-threading, and this does seem to work - the response to mouse clicks is much faster. However, it has the side effect of making the main GUI while loop run less evenly. I was trying to get a fairly smooth waveform scrolling across the screen, and when multi-threading is off it gets a bit jerky.
Any other suggestion welcome..
(I am using LabVIEW 7.1, Windows 2000).
Regards,
Mark.

Hi Altenbach,
Thanks for your reply. In answer to your questions:
I am doing both DAQ board and serial data acquisition. I am using NIDAQ traditional for the DAQ board, and VISA for the serial. I have other similar versions of this program that do only DAQ board, or only serial, and these work fine. It was only when I combined them both into the same program that I ran into problems.
The multiple while loops are actually in separate VIs. I have one VI that acquires data from the DAQ card, another VI that acquires data from the serial port, another VI that processes the data and saves to file, and another VI, the GUI VI, that displays the data in graphs and charts. The data is transferred betwen the VIs via LV2 globals.
The GUI VI is a bit more complicated than I first mentioned. It has tab control, with 4 waveform charts on one page, 4 waveform graphs on another page, and 3 waveform graphs on another page. The charts have a history length of 2560, and 16 data points are added 16 times a second. The wavefom graphs are only updated once per minute.
I don't use the value property at all, but I do use lots of property nodes for changing the properties of the graphs and charts e.g. changing plot colours, Y scale range etc. There is only one local variable (for the Tab control). All the graphs and charts have data wired directly to their terminals.
I haven't done any profiling yet.
I am building arrays in uninitialised shift registers, but this is all well under control. As the experiement goes on, more data is collected and stored, and so the memory usage does gradually increase, but only to the extent that I would expect.
The CPU usage is 100%, but I thought this was always the case when using NIDAQ with DAQ cards. Or am I wrong about this? (As a side note, I am using NIDAQ traditional, but would NIDAQmx be better?)
Execution priority of the GUI vi (and all the other VIs for that matter) is set to normal.
The program is a bit large to post here, and I'm not sure if my company would be happy for me to publicise it anyway, so I suspect that this is turning into one of those questions that are going to be impossible to answer.
Just as a more general question, why would turning off multi-threading improve the user interface response?
Thanks,
Mark.

After Effects Crashes On Startup (Initializing User Interface)

OK, this is really frustrating me now.
I've tried CS3, CS4 both on a Late 07, maybe early 08 White Macbook running Leopard 10.5.8, 4GB Ram, 2.1GHz CPU.
I installed CS4 without a hitch, but when I go to open it sticks on "Initializing User Interface" at the splash screen and then crashes and quits. This happens with CS3 as well, and I am unable to open anything.
I've tried to delete user preferences, create a new user and try there, repair disk permissions, connect an external monitor and try again, nothing works!
Any suggestions to get this to work?

I just did this search for the error message, and I found some possible solutions, including in the comments on this page.

Why hasn't Adobe navigation and user interface design improved as much as it could have over time?

I haven't tried CS6. I'm sure it's great based on what i've seen alone. But as a user of adobe products for a number of years, i have to noticed there are still a lot of stagnant,awkward, stiff, irriating, slowing down elements found in the navigation and user interface on cs3-cs5, that i'm sure could have been eliminated or improved on at least from 2005 or 2007 onwards. I find some of these things inexcusable and unprogressive from bad traits that defined 1980's and 1990's general computer navigation and so on.
CS5.5 has lessned this a bid bit and is more fluid in bits and pieces but for those using cs3-cs5 and in general, i find some things just horrid. As a graphic designer no one is supposed to admit the flaws or irrations of these programs. We must hail them as god, never critisize, and always adjust to new things which i think is a bit fascististic and silly
The way the tools, options are laid out can be improved to be quicker, and easier to find and use. Using your voice as a commanding system would be helpful as well.
A lot of cmds are too complex to remember, they can be simplier or resemble the name of the tool or option. Its makes a chore to follow this system and competition for the smart *** who memormized all the cmds.
The way in which you loose floating side boxes, and the amount of tools or names hidden in the bars sometimes seem random and its always a constant search to find them incase you forget where they are.
The inability to open cs4 or 5 files in cs3 is just beyond extremly annoying. Whey shouldn't you be able to open cs1 or 2 files or photoshop 9 files as well? Every five years work expires as well?
The layering system gets tricky and seems that a lot of things don't work when you normally move things. Its about going back, remembering and clicking on this or that, looking it up to make everything work. Sometimes which leaves you in a rut and wastes a good amount of time. You will always find this even after you've been using it for years.
The use of the fill paint/airbrushing, clone tool, lasso tool, pen tool, history being two steps back can be vastly improved to be much better to use
Masking and tools that have more complex features should find a way be automatically done or sampled. They can also have less complex steps and tha ability to be previewed, automatic or simpler ( in case you can't remember how to do something or aren't getting it)
A lot of the special effects, and blending modes are useless, outdated, super-ugly and don't resemble true darkroom effects ( such as polarization, and bas-relief for example) which they could much more vividly done. There also could be more options that are closer to repro cameras/CTP software for halftoning and more complex digital effects.
Having to press or get used to pressing muliple keys or clicks for the most basic things simultaneously can be reduced to be easier
Adjusting text, new documents, photos should have a smoother, quicker navigational experince where things a lot of room to be , clicked back, re-done, saved in the wrong place etc..
Indesign could use more shapes, include more features that illustrator has, and possibly even photoshop to save time.
There should be a way to remind you of features, complex things you've forgotten, other than history and daily usage/practice of the programs
The help should resemble more of "visual -learners" guide books with voice features.
There are a lot more
Regarding other things:
I think the price encorages more piracy and allows people to not have a concept of what is means to owning software.
The loss of a manual or lessening of them for certain programs is a loss because it's always useful to physical info you can flip through while looking at your program.
I think adobe should make entirely better products for professionals or people in the industry rather than spoonfeeding the same software to all.
They should also make less expensive add-ons like before for graphic software.
What do you adobe could have improved over time and if so what do you think they could have improved on?

You have this wishform to suggest improvements to Adobe products:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
and the Creative Suites forums are here:
http://forums.adobe.com/community/creativesuites
This specific forum is only for discussions on the forums themselves, so you are not very likely to get any change by posting your comments here.

User Interface in NWDS

Hi all,
I am developing webservice through NWDS.Can anyone suggest me how to develop the user interfaces in NWDS.
thanks,
krish

Hi,
See this,
http://help.sap.com/saphelp_nw2004s/helpdata/en/40/00be09879f114aa1ec46c2afa4445b/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9221b490-0201-0010-0e90-8cc75cde876c
http://help.sap.com/saphelp_webas630/helpdata/en/cb/f4bc3d42f46c33e10000000a11405a/content.htm
Regards,
AKshay.
Reward points if find useful.

Mavericks user interface hangs - any known solutions?

I have a 27" late 2012 iMac with an up-to-date copy of Mavericks (10.9.4.)
Occasionally (as in every couple of weeks) the user interface hangs completely.
The mouse cursor moves, but clicks do not have an effect, and the keyboard is ignored.
Applications continue to update the screen. Today, for example, I was running Windows RDC 8 through a VPN to a customer server. After the hang started, I could see the progress updates on an SQL server restore as it continued to run. Activity Monitor was updating in the background too.
Connecting from my (17" MacBook Pro) laptop (: I love that machine!) using Screen Sharing worked but I could not update.
I took the dog for a walk for an hour or so, and when I returned there was a login screen on the iMac. To my great delight, I typed in my password and logged back in. To my greater disappointment, the UI was still hung and my only recourse was to crash it by holding in the power button until it stopped, then reboot.
The machine has 24GB of RAM and 1.92TB of free disk space. I doubt it is running out of resources. It has no additional displays connected.
The only weirdness is Teleport - which allows me to share the iMac keyboard with the laptop. It is entirely possible Teleport is the culprit, but I am hoping it is not.

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Note the timestamps of the BOOT_TIME log messages, which refer to the times when the system was started. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged before the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
For example, if the system was unresponsive or was failing to shut down for three minutes before you forced a restart, post the messages timestamped within three minutes before the boot time, not after. Please include the BOOT_TIME message at the end of the log extract—not at the beginning.
If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Some private information, such as your name, may appear in the log. Anonymize before posting.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". A shutdown stall report has a name that ends in ".shutdownstall". Select the most recent of each, if any. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot. It's possible that none of these reports exists.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Suggestion: User Interface(UI)

Similar Messages

Maybe you are looking for