Suggestions for cover/skin compatible with iTalk

I have Speck Products Tough Skin and it is not iTalk compatible to say the least.
Any suggestions on a good alternative?

Hi,
1- The [Otterbox|http://www.otterbox.com/apple-iphone-4-cases/apple-iphone-4-cases,def ault,sc.html] has a solid reputation for being the most durable case of all. It's a little chunky but anything that offers decent protection isn't going to be paper thin. I'm not aware of any customizable photo case.
2- There are many cases with a backup battery built in ([Mophie is popular|http://www.mophie.com/mophie-juice-pack-air-iPhone-4-battery-case-p/114 5_jpaxp4.htm] but none have inductive charging. Fair warning- this technology is still in it's infancy with consumer gadgets and many consider the inconveniences (having a large lump on the back of your phone) not worth the 3 seconds it saves you from having to plug it in.
-SM

Similar Messages

Need suggestions for a new printer with OS 10.9.5

I have a 2010 HP 6500 A Plus printer that has worked well with my iMac circa 2010. Printer is not feeding paper. It won't scan. Are there suggestions for a new compatible printer for OS 10.9.5.?

Hey Debbisita,
Thanks for the question. It sounds like you are experiencing issues with your Printer and OS X. Before opting to purchase a new printer, you can try these troubleshooting steps to completely isolate the issue:
Troubleshooting printer issues in OS X - Apple Support
http://support.apple.com/ts3147
Follow these steps until the issue is addressed:
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Thanks,
Matt M.

None of the fact sources for [column] are compatible with the detail filter

Hi Experts,
I am using obiee 11.1.1.7.
Getting below error when i add a filter of non conformed dimension column.
Below is the error
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14023] None of the fact sources for [column] are compatible with the detail filter
Please help in solving an issue.
Regards,
NN

Hi NN
You need to follow steps in below link to model your BMM layer for the report to work with non confirmed dimensions.
http://obibb.wordpress.com/2010/05/31/multiple-fact-reporting-on-non-conforming-dimensions/
Once you have followed these steps you can use the non confirmed dimension in the reports.When you see the logs to see the query generated by obiee,it generated 2 queries 1 with confirmed dimension and other with non conformed dimension.When you filter using non confirmed dimension you will now not notice any error but the results will not be filtering out because the filter will be applied only in 1 query which is valid
Now for this to work what you can do is ,instead of using the filter drag the column you like to filter as a prompt in your view.default it to the value you need using the case statement and hide it.This is one of the work around.
There may be many other work arounds for this but you need to understand that for you requirment to work you need to tweek OBIEE to generate 1 query instead of 2 queries.

Is HD anti-glare film for iPhone 4 compatible with Seido Innocase Rugged?

Is Power Support HD anti-glare film for iPhone 4 compatible with an Seido Innocase Rugged case? (That case is the one that, aside from the holster, has 3 pieces: a 2-piece plastic case that slides over the phone, a soft rubber-like case that fits over that, and finally an X-shaped plastic back that grabs the corners of the soft case.)

Nope. My PS Crystal screen protector looks like there's nothing on my iPhone 4. I've tried many screen protectors, and this one is by far the best I've ever used.

I WANT TO KNOW IF THE SONY BLUETOOTH Wireless Transmitter for iPod IS COMPATIBLE WITH THIS IPOD CLASSIC 160 GB (THE OLD ONE)

I WANT TO KNOW IF THE SONY BLUETOOTH Wireless Transmitter for iPod® IS COMPATIBLE WITH THIS IPOD CLASSIC 160 GB (THE OLD ONE)

According to it's page on Sony's website, it should be compatible with all Classic models.
http://www.sonystyle.com/webapp/wcs/stores/servlet/ProductDisplay?storeId=10151& catalogId=10551&langId=-1&productId=8198552921665274447#features
So I would say yes.
B-rock

Graphics drivers for windows 7 compatible with hp notebook pc 500

iplz recommend me graphics drivers for windows 7 compatible with hp notebook pc 500

Hi:
Download and run this driver. You will probably get an unsupported operating system error.
http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=447304&swItemId=ob_47264_1&swEnvOid=2096
Close out of any error windows.
Go to the device manager and click on the video controller needing drivers.
Click on the driver tab. Click on update driver. Select the Browse my computer for driver software option and browse to the driver folder that was created when you ran the file.
That folder will be located in C:\SWSetup\sp34749.
Make sure the Include Subfolders box is checked and the driver should install.
Reboot and your graphics should be working normally.
You will not have Windows aero because the Intel GMA 900 graphics adapter is not 100% Vista or W7 capable but at least you will be able to change the screen resolution and have graphics acceleration enabled.

HT2477 Are documentS created with Microsoft office for windows and Microsoft office for mac are compatible with each other

Are documents created with Microsoft office for windows and Microsoft office for mac are compatible with each other?

As with a lot of software, it depends on the version of Word, and what features the author used.
Technically, Office 2010 for Windows and 2011 for Mac are supposed to be feature compatible. As are Office 2007 for Windows, and 2008 for Mac.
However, if a person using Office 2010 / 2011 used a feature that only exists in that version and sends the file to someone using Office 2007 / 2008, they would very likely have trouble opening the file, or having it display as intended.

Looking for graphic cards compatible with the basic G5

Help!!
Went to the Apple Store to see if my G5 (M9020LL/A) which is the 1.6GHz PowerPC to see if it was compatible/could drive the 30" cinema display. They assured me my G5 could handle the large display. I have OS 10.5.8, iLife 09, 1 TB HD, 4GB RAM, NVIDIA GeForce FX 5200 Ultra with 64MB DDR SDRAM for the 8x AGP Pro slot.
The display arrived, I get picture but not resolution. Searched for a video/graphics card that was compatible. The ATI Radeon 9600 Pro PC/Mac with 256MB was recommended. I purchased one but can only get it to work with a safe boot. Get resolution but iPhoto cannot do the photos in full screen mode. But I can get full screen photos in screen saver mode?!
Apple support states they only recommend/support two cards for my model, the Radeon 9600 @ 64 MB, 2480X1326 res or the Radeon Pro, 128 MB, 2480X1326 res.
Has anyone had a similar problem with the Radeon card 9600 Pro PC/Mac with 256MB? Does anyone have a solution as to which card would be compatible with my G5 and get 2560X1600 res?
Any suggestions? Thanks you for your help!

Hi-
Welcome to Discussions!
Apple support states they only recommend/support two cards for my model,
Those were the only two cards offered at the time, so that is their "official position". You may safely ignore them..... even though they lied to you regarding the 30" ACD and your machine.
Has anyone had a similar problem with the Radeon card 9600 Pro PC/Mac with 256MB?
Often reported here on the forum.
Not a good card. If it works, fine, but many report as you do....Safe mode only.
The G5 can use any 8x AGP graphics card that was available in any AGP model G5.
OEM Mac cards with dual link DVI for the 30" ACD are:
Radeon 9650
Radeon X800XT
Geforce 6800 GT DDL
Geforce 6800 Ultra DDL
A flashed (converted WinPC card) Geforce 7800 GS may also be used.
Any of the above cards can be found on eBay/Apple Components.

Is Office 2008 for Mac more compatible with PC's ?

Hi,
I currently have iWork 09. Sometimes, I save my documents to a .doc format for instance, but when I re-open it, I always have error messages saying that this thing or that thing has been modified to fit the current format etc...
If I use office 2008, will it be a 100% compatible with PC's ?
Sincerely.

Yes, Office for Mac should be fully compatible with Office on Windows.
The reason errors are popping up on your iWork documents may be because you are using things that aren't supported in Word (such as image reflections, or different fonts).

Is there a way to make the MJPEG codec for my camera compatible with Lion?

The company states:
"Currently, the MJPEG codec is not compatible with Mac OS and the frame rate of this model will be slower on Mac OS systems."
Does this mean that the language the microscope camera (DinoLite) speaks is not understood, and cannot be translated to be understood, by OS X? Is it like this is a custom dialect of MJPEG codec that would have to be designed to speak to OS X? Or, is there an App for that? Thanks!

A codec is a coding format for media. MJPEG is one such for video. If your computer doesn't have a codec to decode the video component then it cannot play it. If it is some obscure third party codec then it is possible the makers don't care about Macs and only made a PC version. Reading about mjpeg it looks like it is an old codec which has had Mac support for quite some time, but it is possible it is some special variant. The Dino-Lite makers don't provide any details on their site.
...and the frame rate of this model will be slower on Mac OS systems.
that's because the highest frame rate feature uses the MJPEG codec which isn't available on Macs so for Mac use you will have to use a format that only works at lower rates.
You could always throw the general third party Mac codec collection at it and see what happens. In addition to MPEGStreamclip try the Perian set of codecs and VLC player.

Help! looking for internet camera compatible with Mac

I need help! I purchased a Mac recently and so far I am very happy with it. However, we just had a baby and I'd like to see and hear my baby from my computer at work. At work we use PCs and at home we havea iBook G4. I bought a D-link wireless G internet camera, the DCS-950G, but I could not install it because it requires you to have a PC for initial installation. I've looked around the web but I've been unable to find an internet camera that works with the Mac. I am desperate and frustrated! Does aynone know of an wireless internet camera that works with the Mac? I'd greatly appreciate any help you can provide. Thanks.

Hello B Real Brad
You do not say which DV camcorder you have. The exact answers to your questions depend upon your camcorder's features and user guide instructions. If you experience problems when you try your camcorder, check your camcorder's users guide instructions. That having been said, here are the answers to your posted questions:> Do I need to have a firewire cable to successfully use it through iChat ...
Firewire will be easiest. If you have a Firewire cable to download your DV Video to iMovie, that one will work fine.
... or can I use the normal usb cable?
Depending upon your camcorder, that may work with additional software and or hardware, but, if your camcorder offers it, Firewire will me much easier.
.. is the quality ... better using a DV camcorder ... ?
Usually. This depends on which camcorder you compare with which webcam.
Some people like the image quality of their camcorders better. See John Kennedy's "Cameras and Image Quality", the Sat - October 30, 2004, blog for a comparison. (John's is a very high quality camcorder.)
See this link for my reasons for using a webcam when I do not need portability or highest possible quality. Some of the reasons may be of interest to you.For specifics on how to get going, see my recent response to Tony Keogh. Although Tony asks specifically about a particular Sony model, the specific suggestions I made there should apply to your camcorder, too.
If the above do not get you going, I suggest that you start your own topic and give as many specifics as possible about your system, your problem, and what you have already tried. Your questions deserve the individual attention they will get in a separate topic.
Here are a couple of other suggestions for your consideration:
(1) I see from your other posts that you use Miglia TVMini. Be aware that some AV devices and third-party items can cause possible hardware or software conflicts with iChat.
(2) Also, your system info shows that you are using 10.4.4. I suggest that you update to the latest available version of Tiger using the following method:- Repair permissions.
- Then download and apply the Mac OS X 10.4.9 Combo Update (PPC).
- Finish with another Permissions Repair.The latest Combo Update offers several additions and improvements over the older versions.
Cheers,
Jim
Mac OS X (10.4.9) G5 DP 1.8 External iSight

Is the FrontPage Site Wizard for DW MX2004 compatible with DW CS4?

Hi,
Can anyone please confirm whether the 'FrontPage Site Wizard for Dreamweaver MX2004' and 'Publish Web Command for Dreamweaver MX2004' extensions are compatible with Dreamweaver CS4?
I have downloaded and installed both of these extensions successfully, however, when using the extensions within Dreamweaver CS4, I am unable to see 'FrontPage Server' as an option to select.
I'd be grateful if someone can clarify whether there may be a problem with the version of the extensios used (v2.1.0 and v1.1.0), or whether it is simply a permissions issue that prevents me from being able to select FrontPage Server as an option to import from or publish to?
The Technote 15685 (Publish Web command: transferring with FrontPage Server extensions) describes the following:-
Once the extrension is installed, Dreamweaver lists an additional option in the Access menu of the Remote Info category when editing a site.
Within either the Document or Site window, choose Site>Define Sites.
From the list of available sites, choose the site with which you wish to connect to the FrontPage server and choose Edit.
Within the Site Definition dialog box, choose the Remote Info category.
From the Access drop down menu, you will now see FrontPage Server. Choose this option and enter the connection information for your site.
From the above instructions, I cannot see the FrontPage Server option.
Any help or advice but be very much appreciated.
Thank you,
Gary

Hi
Sorry the extension is not compatible with CS4 (was not even compatible with DW8, as far as I am aware). For connecting to the server ask your server administrator to activate WebDAV, and use that option if possible.
PZ

Suggestions for an iPad compatible projector

Looking for an iPad compatible projector

I have several X200s, with different types of screen, including a X200 with AFFS (but the glossy one) and two X200s with WXGA+ screens, though I never tried them in direct sunlight, I think the LED WXGA+ are slightly brigther, but the contrast and colours of the AFFS are much better; again, with the glossy model (the -110)
Before answering your questions it would be good to know which panel you have now? Some "s" models came with LED screens ex-factory. If you're sure you have a CCFL then an AFFS screen is plug and play. (
WXGA+ will give you more pixels, probably the best is trying to get a full assembly instead of the panel itself. You loose the webcam with such a screen (no way to put one under the bezel).
Generally speaking, if you have a CCFL panel and you want a LED one, you will need a different cable and LED subcard.
If you currently have a LED panel and want a WXGA LED, you keep your parts. If you want to go WXGA+ you need a different bezel.
I hope this helps and I didn't confuse you much :-D (It's late now)
/L40SX/240/240X/2*340CSE/360PE/365XD/380D/380E/380XD/380Z/390/560E/560X/2*570/2*600/600E/750Cs/755C/760CD/760EL/760XD/770E/A20p/A22p
A31/i1600/G40/R50p/R61i/S30/SL510/2*T22/4*T4x/11*T6x/6*T4x0x/6*T5x0/3*W5x0/W700/3*X2x/4*X3x/3*X4x/5*X6x/3*X6xT/10*X2xx/2*X200T/4*X30x/Z60m/3*Z61x
Comunidad en Español English Community Deutsche Community Русскоязычное Сообщество

Is 10.3 for emac G5 compatible with my G4 450?

Looking at buying some software and I am wondering if the OSX 10.3.3 for eMac G5 will be compatible with my G4. The following is the info
Power Mac G5 Software Install and Restore 1 of 2
MacOS version 10.3.3 AHT version 2.2 DVD version 1.0 691-5002-A 2004 Apple Computer, Inc.
Disk two reads: Power Mac G5 Software Install and Restore 2 of 2
DVD version 1.0 2Z691-4973-A 2004 Apple Computer, Inc.
My G4 is a desktop 450.
G4 Mac OS X (10.2.x)

Welcome To Discussions jwh197466!
Some additional information.
Tiger is available for purchase at The Apple Store (U.S.).
Panther, is no longer available directly from the Apple Online Store, as Tiger 10.4.x is the most up to date OS.
A Full Retail Version, of the Panther Install CDs, or a Full Retail Version, of the Tiger Install DVD, can be purchased rather inexpensively, at some additional online Apple retailers, Amazon, eBay, FastMac, etc.
Be sure not to purchase grey, upgrade or machine specific CDs or DVDs.
Panther is only on CDs, not DVDs.
Additional info in these links.
Using OS X Install CDs/DVDs On Multiple Macs
What's A Computer Specific Mac OS X Release
Software Update, Upgrade: What's The Difference?
Once Panther 10.3.x is installed, you can use the 10.3.9 Combo Update, to upgrade to the final version.
If your Mac meets the System Requirements for Tiger, you could also consider installing that.
And then use the PPC 10.4.8 Combo Update.
Panther System Requirements
Additional Panther System Requirements
Tiger System Requirements
Mac Model Compatibility & Requirements For OS X
Additionally,
"Tiger ships on a DVD, but if your Mac doesn’t have a built-in DVD-ROM player, you’ll need CD media. When you buy Mac OS X Tiger, you qualify to purchase Tiger CDs for only $9.95."
Download The Order Form Here. Media Exchange Program
Orders must be mailed by December 20, 2006.
Shop Carefully, Examine All Documentation, And Good Luck!
ali b

Suggestions for Apple in dealing with icloud outages

The ongoing outage of icloud mail service to many of us, two days and counting as of Sept 12, 2012, prompts me to make some constructive suggestions for Apple.
Apple should find ways of letting customers know whether customer inability to access their icloud mail is something the customer can fix or whether it is a problem only Apple can fix.
As a starter, the popup windows that users see when icloud mail is unavailable should direct them to the web site where system status of icloud mail is shown, namely
http://www.apple.com/support/icloud/systemstatus/
Customers will be less likely to exhibit anger toward Apple if they are given some real information about why icloud mail is unavailable. This can be put on the system status web page above.
The staff on the floor at Apple Stores should know, and be willing to tell customers, that when their own ipads are having difficulty communicating because of a server problem, that this may also affect the service to customers.
Apple should consider gathering from clients of icloud mail some alternative email accounts that could be used to notify clients of outages.
Apple should acknowledge that people do rely on their icloud services and should find ways of using backup servers, much as hospitals have backup generators to supply electricity when municipal sources fail.

The ongoing outage of icloud mail service to many of us, two days and counting as of Sept 12, 2012, prompts me to make some constructive suggestions for Apple.
Apple should find ways of letting customers know whether customer inability to access their icloud mail is something the customer can fix or whether it is a problem only Apple can fix.
As a starter, the popup windows that users see when icloud mail is unavailable should direct them to the web site where system status of icloud mail is shown, namely
http://www.apple.com/support/icloud/systemstatus/
Customers will be less likely to exhibit anger toward Apple if they are given some real information about why icloud mail is unavailable. This can be put on the system status web page above.
The staff on the floor at Apple Stores should know, and be willing to tell customers, that when their own ipads are having difficulty communicating because of a server problem, that this may also affect the service to customers.
Apple should consider gathering from clients of icloud mail some alternative email accounts that could be used to notify clients of outages.
Apple should acknowledge that people do rely on their icloud services and should find ways of using backup servers, much as hospitals have backup generators to supply electricity when municipal sources fail.

Suggestions for cover/skin compatible with iTalk

Similar Messages

Maybe you are looking for