Suggestions for NAS and How to Connect

I'm looking at buying a 1.5TB+ NAS. A few questions:
1) Any product recommendations?
2) I have a 500GB Time Capsule. Should the NAS be connected to my router or the Time Capsule (or does this matter)? Looking for the best speed.
My current 500GB Seagate Free Agent freezes and disconnects during file transfers. I understand this is an issue with the drive. Hence the search for an NAS.

1) Any product recommendations?
I suggest that you check out the new Drobo FS.
2) I have a 500GB Time Capsule. Should the NAS be connected to my router or the Time Capsule (or does this matter)? Looking for the best speed.
For best bandwidth performance, you want to connect the NAS by Gigabit Ethernet.

Similar Messages

  • Suggestions for NAS for home network and remote access to clients

    I have a photo studio in my home and will need to get the digital files to my clients roughly once a week. i am currently using dropbox, but was thinking of purchasing a NAS that I could use for this purpose,as well as for my home network needs, mainly itunes and photos of the kid...
    any suggestions for a mac friendly NAS , and how it can be accesed by my client over the internet?
    can a NAS be accessed like a FTP site, using fetch or another FTP client?
    thank for any help.
    -thomas

    Hi Thomas,
    I have had similar considerations and finally chose QNAP 439 Pro II over the many other ones out there (LinkSys, NetGear, Bufallo, etc.). Without going into technical details, the main reason for my choice were easy-of-use, functionalities and scalability:
    http://www.qnap.com/prodetail_feature.asp?pid=148
    It's not the cheapest solution out there, but works great with the Mac, even acts as storage solution for TimeMachine (with latest firm ware). And implementing client access is easy.
    Hope this helps.
    Kind regards,
    Mark

  • I have samsung corby gts3653 mobile and need to connect internet to mac through it but it doesn't have wifi and pcsuite for mac and how could i able to connect it through gprs? GPRS is active in mobile but unable to link it with macbook pro(using lion os)

    i have samsung corby gts3653 mobile and need to connect internet to mac through it but it doesn't have wifi and pcsuite for mac and how could i able to connect it, through gprs? GPRS is active in mobile but unable to link it with macbook pro(using lion os) can any one reply.

    Until the MacBook Air was released and supported in 10.5, the Mac did not consider USB to be a valid Networking Protocol. So set the Mac with USB solutions aside.
    To connect computer-to-computer, you typically need to be using an Ethernet crossover cable. Assigning the same address to two Ethernet devices is never the solution -- it gives a Network Conflict, just as you said.
    If your Windows box has some mechanism for Sharing its WiFi connection over Ethernet, you would have to follow its rules. Whether that means Manually assigning an Ethernet Address in the same range or the PC will provide the Address, I do not know.
    Best success may be running an Ethernet cable to your Wired/Wireless Base Station, or using a "gaming adapter" (Ethernet-to-Wireless no drivers required) connected to the Mac's Ethernet port to give it WiFi access. What is your Base Station {Cable, DSL, FIOS, Other} ? Ethernet cables can be up to 100 meters (an American Football Field). Often the Base Station can be moved closer for more convenience.

  • Whenever I try to login to my instagram an error appears saying that they couldn't connect to their login server ... What is that for? And how to fix that?

    Whenever I try to login to my instagram an error appears saying that they couldn't connect to their login server ... What is that for? And how to fix that?

    I called Apple Support and they walked me through it. They told me to basically copy and paste my music to the external hard drive. (I think.) Or maybe it was they had me transfer a folder to the EHD. I don't exactally remember it was a few years back. But I tried to plug in the EHD before starting and...nothing. Still says same thing, "locate file."

  • Suggestion for additions and corrections to FAQ's

    The FAQ forum will constantly evolve as issues are added and updated. Since the topics are read only other than to forum workers, we wanted to give users a special topic where they can add their suggestions for additions and corrections.
    Please keep in mind that all forum workers are volunteers, they do this because they enjoy helping other users.

    Chris,
    Like I said, Im relatively new to PhotoShop and PS forum. I have researched the PS manual, PS help topics and this forum. I am not an individual that would ask a question of hard-working volunteers about a subject that I have not already researched. And yes, I know and understand what FAQs are and how they are generally presented on the web.
    Huh? The FAQ section is for administrators to add things to, not users. If you have a question, you ask in the main forum. If many people ask the same question, then the administrators add an entry to the FAQ.
    Okay if this is true, how was I able to post a message? I wasnt aware that I couldnt post a FAQ suggestion to the FAQ suggestion Forum? Hmm, maybe I missed the
    small print on that one.
    Look ... I do NOT want to create any hostility with you. You have given me some answers and I appreciate your comments. I will go back and "wade through" all of the forums to look for basic or frequent problems that may answer some frequent questions.
    Cheers!
    Dennis

  • How can I create back up dvds for itunes and how do I back up from existing dvds?

    How can I create back up dvds for itunes and how do I back up from existing dvds?

    Recovery Mode:
    1. Turn off iPad
    2. Connect USB cable to computer; leave the other end alone
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPad
    Note: You need to be patient and repeat the above many times to recover your iPad

  • My new (8/2012) iPod Touch: voice control suddenly activates on its own. Is there a reason for this and how do you get it to stop?

    For reasons unknown to me, my brand new ipod touch keeps activating Voice Control. I am not pressing the home button or touching any controls. I can be doing nothing with it and it just kicks on, sometimes interrupting what is already going on (like listening to an audio book in the Audible app. Is there a reason for this and how do I stop it?

    Press the Home Button 3 Times... then goto  >  Settings > General > Accessibility > Voice Over > Off
    Next... Try this...
    Close All Open Apps and Perform a Reset...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • I woke up this morning and my Bookmarks is working different.  Has a setting changed, or did Apple change it for me and how do I get it back?????????

    I woke up this morning and my bookmarks are functioning different, and the tool bar has changed.  Instead of opening the bookmarks in a page on Safari, I get a menu on the side of the page.  Then I have to go click on the bookmark icon again to get rid of the menu.  Has a setting changed or did Apple change it for me and how do I get it BAAAAAAACK????????????

    The first G4 models were basically a repackaged/upgraded G3 & came in 350 & 400MHz models. This design was called PCI version. The next G4 models were AGPs. This link http://www.everymac.com/systems/apple/powermac_g4/index-powermac-g4.html has the specs/pictures of all the G4 models.
    Power Mac G4: How to Differentiate Between Models
    http://docs.info.apple.com/article.html?artnum=58418
    Power Mac G4: How to Differentiate Between Models (Part 2)
    http://docs.info.apple.com/article.html?artnum=42739
    Using these links, you should be able to determine which model you have.
    Removing the battery causes all settings in the internal memory to be reset, just like resetting the PMU/CUDA. See Mac PRAM, NVRAM, CUDA/PMU & Battery Tutorial
     Cheers, Tom

  • How run app for customers and how to send dunning notice to vendors

    Hi experts.
    Can any one help on following issue with example scenarios.
    how run app for customers and how to send dunning notice to vendors

    Hi,dear
    you should enter customer account numbers in f110 for payment receiving from customer, and assign dunning procedure to vendor master record and process the dunning to vendor by using f150.
    regards,
    nagesh.

  • How process app for customers, and how to send dunning notice to vendors

    Hi experts,
    can any one help on this
    how process app for customers, and how to send dunning notice to vendors
    Thanks & regards,
    vinod
    Moderator: Please, read and respect SDN rules

    Hi,dear
    you should enter customer account numbers in f110 for payment receiving from customer, and assign dunning procedure to vendor master record and process the dunning to vendor by using f150.
    regards,
    nagesh.

  • My requirement is to update 3 valuesets daily based on data coming to my staging table. What is the API used for this and how to map any API to our staging table? I am totally new to oracle and apps. Please help. Thanks!

    My requirement is to update 3 valuesets daily based on data coming to my staging table. What is the API used for this and how to map any API to our staging table? I am totally new to oracle and apps. Please help. Thanks!

    Hi,
    You could use FND_FLEX_LOADER_APIS.UP_VALUE_SET_VALUE to upload them from staging table (I suppose you mean value set values...).
    You can find a sample scripts if you google around.
    What do you mean "how to map any API to our staging table" ?
    You should do at least the following mapping (which column(s) in the staging table will provide these information):
    - the 3 value sets name which you're going to update/upload (I suppose these are existing value sets or which have been already created)
    - the value set values and  description
    Try to start with something and if there is any issues the community could then help... but for the time being with the description of the problem you have provided, that's the best I can do...

  • I started to download a movie for rent and lost internet connection. Now it tells me to go to my downloads but I can't find them where should I look.

    I started to download a movie for rent and lost internet connection. Now it tells me to go to my downloads but I can't find them where should I look.

    Me too!!! It says check your Downloads, but unable to find Downloads...

  • Hi how are you i want to replace my iphone 4 with a new one. But i am in Darwin,there is no any apple stores. So where can i send my phone for replacement and how much for that?

    Hi how are you i want to replace my iphone 4 with a new one. But i am in Darwin,there is no any apple stores. So where can i send my phone for replacement and how much for that?

    Warranty and Support are only valid in the country of origin.  You will need to take the device to whatever country it originally came from.
    Apple will not accept shipments from outside the country nor will they return it to an address outside the country.

  • I am living now in UAE if I bought an I pad from your website is the warenty for it and how I will use the waranty

    I am living now in UAE if I bought an I pad from your website is the warenty for it and how I will use the waranty

    You can find authorized Apple dealers in Abu Dhabi by clicking here. They can answer purchase questions and most can handle warranty service.
    By the way, this forum is for questions about the iPod touch, not the iPad. If you have questions specific to the iPad, it would be best to ask them in the iPad forum.
    Regards.

  • I have become a full-time student. How do I adjust for Illustrator and how do I purchase InDesign?

    I have become a full-time student. How do I adjust for Illustrator and how do I purchase InDesign?

    Don't buy of eBay better to go direct to adobe try
    https://www.adobe.com/education/student-eligibility-guide.edu.html
    Regards
    Vividi

Maybe you are looking for

  • The report terminated with error:  REP-501: The specified database cannot b

    Dear All, We are usning forms and reports 11g in weblogic . while running the reports from forms frequently getting the error The report terminated with error: REP-501: The specified database cannot be connected.. Can anyboby help me to solve this pr

  • Newbe with a question

    First, I would like to say Hello to all of the other forummers, as being a newbe. And as a newbe, I offcourse have a question.... Will the new AMD 333fsb  series processors run on my KT3 mainboard, after obviously flashing the bios? Thanks in advance

  • How much does it cost to replace battery in macbook air

    I have an original mac book air that will no longer hold a charge for the battery.  I was wondering what the best way would be to have the battery replaced? Thanks in advance, Jim

  • Installing photoshop elements13 on a Mac

    i am having continued issues installing PSE13 on my mac keep getting adobe application manager quit unexpectledly then it tells me i don't have permissions to write to applications feeling extremely frustrated

  • Error deploy SOA application "Deployment Failed: Unable to register service

    Hi All I have build a SOA application and tried to build and deploy to my SOA server but stuck with below error msg. Step-1: Created the application, with BPEL components etc. Step-2: Right click on the application, then Deploy -> To -> My Server.. S