Suggestions for reinstalling Dreamweaver CS5 on Yosemite without error message?

Hello,
I recently uninstalled my Dreamweaver CS5 because it wasn’t working properly after upgrading to Yosemite. It would start up and then freeze so I would have to Force Quit. I am trying to reinstall it but I keep getting an error message. I’ve looked at the following articles to try to get it to work. I’ve tried installing in a different folder than the Applications folder, renaming the ‘Adobe’ folder in the Applications folder and changing read and write info. I looked at the log files and I was getting the DW063 and the DF037 errors.
http://helpx.adobe.com/x-productkb/global/installation-launch-log-errors-creative.html
http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html#main_OSX
http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html
There’s something that I’m missing and I would greatly appreciate any help. I'm guessing when I did the uninstall through the uninstall in the Dreamweaver folder that it missed something on the uninstall.
Thanks,
Matt

See this related thread:
Re: Dreamweaver 5.5 Crashing with OS 10.10.1
Nancy O.

Similar Messages

Hi there, i erased my macbook and trying to reinstall it, i keep getting an error message"could not find installation for this machine" please what can i do?

Hi There,
I erased my macbook and trying to reinstall it, i keep getting an error message "could not find installation for this machine" what must i do please?

It is the internet connection.
Try again or another internet connection.

Since updating to Yosemite my airport express (used for airplay) connects for a short period then drops, the error message "An error occurred while connecting to the AirPlay device "Kitchen". The host cannot be reached." Has anyone else had this?

Since updating to Yosemite my airport express (used for airplay) connects for a short period then drops, the error message "An error occurred while connecting to the AirPlay device “Kitchen”. The host cannot be reached." Has anyone else had this problem

I'm having the same issue. Haven't found a workaround. I use a main TimeCapsule as my main router, also have another TimeCapsule that extends the network, three Airport Express and an AppleTV. For whatever reason, the two AirportExpress that I have in a different rooms cut out. I only have 600 square foot apartment so it's not that big, the signal should be strong enough. Airport Utilitiy reports the signal strength to be strong on all devices.
I'm using all new equipment, a new MacPro for my music, new TimeCapsules, new Airport Express, new everything with the latest Yosemite software. Very frustrating. My Airplay used to work very nice and now I'm constantly having issues and restarting my network. I did a fresh install of all my software on my MacPro when I got it in January so it's not as if it's an old machine with old software, everything is new within the last 6 months.
The only workaround I found so far is to unplug the devices and to plug them back in. Since upgrading to Yosemite, I'm restarting my Airport Express at least twice a week. Very annoying.

After un-installing Itunes, I am unable to reinstall. I receive the following error message: microsoft.VC80.CRT.type="win32".version="8.050727.6195".publickeytoken="1fc8b3b 9a1e18e3b".processorarchitecture="x86". HRESULT: 0x80070424. Help?

I had Itunes on my PC (Windows Vista, 64-bit) and it worked fine with my Ipod. I purchased an Ipod nano, and it was not recognized by Itunes and I was instructed to un-install and re-install. After un-installing Itunes, I am unable to reinstall. I receive the following error message: microsoft.VC80.CRT.type="win32".version="8.050727.6195".publickeytoken="1fc8b3b 9a1e18e3b".processorarchitecture="x86". HRESULT: 0x80070424.
I am also having trouble with Windows Updates, and receive the same error message: 80070424. Perhaps the 2 issues are related?
If anyone is able to help resolve the issue so I can successfully install Itunes, I would greatly appreciate it!

I ran the sfc /scannow command, and yes the response was: Windows Resource Protection could not start with the repair service.
A broken Windows Modules Installer then. It's a bit of an involved fix getting past it, but we've had success here with it in the past.
First, I'd strongly suggest setting up a system restore point.
Now try the Scenario III treatment from the following document:
Windows Update Error 80070424 in Vista
Head back into Windows Update and attempt to get updates again. If they still fail, this time with an 8000FFFF error code, try the following Microsoft document:
Windows Update error 8000FFFF
If you get Windows Updates flowing again, stock up on any you're behind on (restarting the PC when requested to do so). This may take some time and may have to be done in several batches, depending on how far you've fallen behind. Basically, keep going back to Windows Update until it stops offering you new updates.
After the updates have been installed, restart the PC one more time (in order to ensure that any pending installs requiring a restart have been resolved).
Now try another iTunes install. Does it go through without the 0x80070424 this time?

There was as error when i tried to update my itunes. I am trying to reinstall but now i get an error message saying to verify if I am able to have apple mobile service. How do i do that?

There was as error when i tried to update my itunes. I am trying to reinstall but now i get an error message saying to verify if I am able to have apple mobile service. How do i do that?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall press on)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

After Upgrade to latest iTunes, it will not open.Uninstall and reinstall did not help Getting this error message '' Runtime Error R6034 '' An application has made an attempt to load the C runtime library incorrectly''. 3 windows PCs.1 vista, 2 windows7 7

I upgraded to the latest iTunes 11.1.4, after a prompt from the iTunes store. But will not open after the upgrade. One of three error messages told me to reinstall. I did. Restarted and scanned. But no help there. So I unistalled and re installed from Apples' website. The installation was okay as usual but still will not open. Keep getting the same error messages. '' Runtime Error R6034, '' '' An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information.'' That's the error messages I get when I try to open the New installed iTunes 11.1.4. Right now there is no iTunes on any of my PCs. Installed but will not open. Please Help.Thanks.
Jonas.
3 Windows PCs. Safari 5.1.5 ( One Laptop with Vista. Two Windows 7 64 bit on All in One Sony desktop PCs. )

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Can anyone help me? The iTunes update corrupted my program. I uninstalled, and then reinstalled iTunes; only to find an error message about iTunes Helper. After several fruitless, repeat attempts, I am at a loss. Please help-

Can anyone help me? The iTunes update corrupted my program. I uninstalled, and then reinstalled iTunes; only to find an error message about iTunes Helper. After several fruitless, repeat attempts, I am at a loss. Please help…

Many thanks.
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

How received the following error message: iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 998). I did what was requested and reinstalled iTunes, but still get this error message. Help!

My Toshiba laptop just recently started showing the the following error message when I try to open iTunes: " iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 998)". I did what was requested and reinstalled iTunes, but still get this error message. Help!

b noir I never got any message about an entry point
Many thanks. If we're looking at a "naked" Error 7, I'd start with box two in the following user tip:
Troubleshooting issues with iTunes for Windows updates

I had to dump my drive and when I restored it and I tried to open Dreamweaver, I'm getting this error message 150:30. Can you tell me what this is

I need help. When I restored my hard drive and tried to open dreamweaver it gave me this error message 150:30. It's telling me that the licensing for this product has stopped working. Can you explain

Use the CS Cleaner Tools and Re-install your software.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Nancy O.

TS2570 How do i get my mac book back to normal, i attempted a safe boot because my safari wasnt opening, when i choose it on the dock, it just bounces for a while then i get a error message. now when i turn it on it only goes halfway thru the loadbar thn

How do i get my mac book back to normal, i attempted a safe boot because my safari wasnt opening, when i choose it on the dock, it just bounces for a while then i get a error message. now when i turn it on it only goes halfway thru the load bar then shutdown?????

Hello, what OSX version?
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

Sharing to DVD all my projects stops att 66 % - without error messages.

Sharing to DVD all my projects stops att 66 % - without error messages.
I'm a beginner in Final Cut Pro X. Not good at ¨computer terms¨ and computers so please take it easy when explaining.
My first three project was succesfully . (I then had no background image.)The fourth project (about 59 minutes) was at first successfully even with a background image. (But when I played the DVD on my DVD-player it stopped completely after 45 minutes, but went on when I tried to play it again, from the place where it stopped.) Then I replaced the background image with another and after that it stopped at 66 %. I read about the error -29 and made my image ¨smaller¨ but nothing happened. I also made the project shorter, about 57 minutes, nothing happened.
I tried a couple of completely new project from 2 – 20 minutes long – the same happened, it stopped at 66 %. (Read about deleting render files and tried that too without results.) I have a Mac OS X 10.8.3 Mountain Lion
Grateful for help after a week with problems. It’s a dancing project and people are waiting for the DVD…

"What finally got it to work for me was Share>DVD>Settings>Backround; added a small jpeg, then removed. For whatever reason, it seemed to jar Create Disk awake."
Using this idea I didn't even add or delete an image, just opened the the Background window and closed it again.
This made one stubborn Project work/burn even with some retimed clips in it.
This action must flick an internal ON switch somewhere????
It's something simple but annoying. I have no idea where to look.
At least with a couple of extra clicks it's now working as expected.
Annamatilda might try the same to confirm the above??
Al

I upgraded to iOS8.1.3, and now when I attempt to backup my iPad to iTunes for Windows, it keeps popping up an error message

H. I upgraded to iOS8.1.3, and now when I attempt to backup my iPad to iTunes for Windows, it keeps popping up an error message "not enough space on the computer". There is over 130Gb of space! I have updated iTunes, but no change. Is it an issue in the iOS update? Or am I doing something wrong?
Would appreciate your guidance...
<Subject Edited by Host>

When you upgraded, itunes should have put a copy of the itunes library database in a folder named *Previous iTunes Libraries* . If you upgraded itunes today it will show as
iTunes Library 2010-02-28.itl
Use these directions to get it back
http://support.apple.com/kb/TS1967
Since I am not sure of your setup, look for the "Previous" folder on both your C: and F: drives.

When trying to install an extension for InDesign CC 2014 I get an error message saying that the extension only works with version 7.0 or greater. My version is 10.0.0.7 x64 Build I was using this extension fine with InDesign CC

When trying to install an extension for InDesign CC 2014 I get an error message saying that the extension only works with version 7.0 or greater. My version is 10.0.0.7 x64 Build I was using this extension fine with InDesign CCError message with InDesign CC 2014

Used the 64bit version before CC 2014 as well so don't think that's the issue. Here is the text in the .mxi file if I have missed something:
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<macromedia-extension id="PrintUI Tools" name="PrintUI Tools" requires-restart="true" version="3.0.0">
<author name="PrintUI.com"/>
<description/>
<license-agreement/>
<products>
<product maxversion="" name="InDesign" primary="true" version="7.0"/>
</products>
<files>
<file destination="" file-type="CSXS" products="" source="PrintUIManagement.zxp"/>
</files>
<update url="http://printui.com/public/downloads/updates/printui_tools_update.xml"/>
</macromedia-extension>

Moved Photoshop Application to my Desktop for easy access and now recieving an error message, help?

Installed CS6 Design and Web Premium, then moved Photoshop Application to my Desktop from Program Files for easy access and now recieving an error message, saying application is unable to start correctly. Can anyone help me troubleshoot this please?

Move the application back where it belongs, with all it's support files.
You can make a SHORTCUT to the application, and place it on the desktop if you wish.

When starting CS5 I get an error message

When opening CS5 I get the error message:
"The procedure entry point ONPreviewViewSet VRAM Usage Hint could not be located in the dynamic link library ONImaging.dll."
I close the message and photoshop opens.
My onOne Software is not available in photoshop.
Any ideas on this problem?

Have you tried disabling the onOne plugins?
Have you contacted onOne about the problem with their plugins?

Suggestions for reinstalling Dreamweaver CS5 on Yosemite without error message?

Similar Messages

Maybe you are looking for