Suggestions for stereo solution

Right now I stream music to my stereo via airport express.
I have an old Sony and some old speakers (15 years plus)
I am thinking we would like to come up with a smaller solution.
Our house is about 1800 square feet, not too big.
There is soooo much out there I am overwhelmed.
Any suggestions?

Patrick G wrote:
There is seriously no wireless solution for music on the iPhone?!??
You can buy a stereo bluetooth headset that has an adaptor, I have one.
The iPhone supports connecting to hands free car kits and headsets via bluetooth.
You can leave iPhone related feedback and feature requests here: http://www.apple.com/feedback/iphone.html
Jason

Similar Messages

HT204406 I attempted to download iTunes match w/o success. Step 1 was fine. Step 2 gets stalled and will not move beyond 80%... Any suggestions for a solution? Why is iTunes stalling on step 2?

I attempted to download iTunes match w/o success. Step 1 was fine. Step 2 gets stalled and will not move beyond 80%... Any suggestions for a solution? Why is iTunes stalling on step 2?

Hi folks,
I found a solution in case your MATCH is still buggy...
JUST BOOT YOUR MAC HOLDING THE SHIFT KEY (until you see a progress bar).
Then in itunes disable and re-enable iTunes Match.
It should rescan all your library and eventually works.
At the end just reboot your Mac normally.
Best regards from Paris.
Nico

The power button on the top of my iPhone 5 is very difficult to turn on and requires an inordinate amount of pressure. Any suggestions for a solution?

The power button on the top of my iPhone 5 is very difficult to turn on and requires an inordinate amount of pressure. Any suggestions for a solution?

Check this website to see if your device is eligible for this program: https://www.apple.com/ca/support/iphone5-sleepwakebutton/

A Suggestion for the solution of AirPlay problem in old Mac's

Hi,
Today I bought an Apple TV 3 from Geneva Apple Store. Eventhough I told the responsible sellsman that I have a late 2010 iMac 27' with i7 Quad Core, he told me that I can use AirPlay. After coming home I realized that wasn't the reality. Fine, I am not going to complain... After some hours of search in google, finding out the reason of the problem and reading the reviews of AirParrot (which is bad for high quality video streaming), I didn't find any discussion about my idea:
Why isn't Apple or any third party developer coming up with a software solution to connect an iOS device containing H.264 chipset to the Mac with the USB cable and use the connected devices chipset to encode the video/audio and steam it wirelessly. Is there a thecnical barrier for this?
Well there may be a delay in the stream (because the processing chip will be not on the main board of the computer but on a USB connected device), but who cares if the movie is coming to the TV screen a few seconds later than the computer screen?
Could somebody please reply to this? I want to know why even it is impossible.
PS: Sorry for my english. I am not a native speaker.
Best,
Olgun Elicin

it's possible to make itunes enhancement requests directly to the Apple folks nowadays. here's a link through to the relevant itunes feedback form:
iTunes application feedback

In FCP7 my share option suddenly quit working, and I can't submit in compressor either. Any suggestions for a solution?

I have had FCP 7 installed on my Mac Pro since May 2011, It has worked flawlessly up until a couple weeks ago. The "share" option has quit working on me. Also, I am unable submit any jobs in compressor, the button is greyed out. This has come entirely out of the blue and I'm stumped as to the best course of action. Any suggestions?
Thank you for your time.
Justin

Thanks for the reply, I actually used the digitalrebellion.com FCS Remover and reinstalled compressor and Qmaster and everything seems to be working properly again.
Thanks again for your reply

Suggestions for optimal solution to load application with dynaminc view

Hi Experts,
I have a Web service which is providing me data from database as well as data which will help to create UI of the view.
In my view i have to ceate tabs in a tabstrip. Number of tabs are dynamic depending on data from web service. In each tab i have to create tables with dynamic columns and some additional text views and edits. Now, tabs and columns of tables, coming from web service are in random order and i need to sort the tabs and tables depending on values filled in a database table. this database table is like a configuration table.
Creating view in a random order is done and for createing a sorted view i am planning to go with "bucket sort". Now my question here is as every thing is dynamic it will take lot of time for aplication to load which is not desired.
I need your expert suggestions on how can i reduce the time view takes to Load entire application.
Regards
Pranav

Hi Friend,
There are may ways to optimize the performance of the application,
First we need to concentrate on the basic web dynpro concepts like componentization. By implementing this concept we can achieve the gol. we need to know whether the monolithic component architecture or Multi component architecture which is suitable and the communication flow between them. More on this you can find here
[Use components in bigger Web Dynpro projects (componentization) |http://wiki.sdn.sap.com/wiki/display/WDJava/UsecomponentsinbiggerWebDynproprojects+(componentization)]
second you can check the proper implementation of the web DynPro hook methods. if this is done properly then most of the application flow will go very smoothly. there is one very good presentation available on this at SDN here
http://www.sdn.sap.com/irj/scn/elearn;jsessionid=(J2EE3417200)ID0393138650DB00661116440296043375End?rid=/library/uuid/20e72f90-efea-2b10-0382-8dd420ee555e&overridelayout=true
You should also check these link it will be very Helpful.
[Best Practices for Optimizing Web Dynpro Java Application Performance|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/604ddc2f-ec9c-2b10-1682-be37e1c62dee?quicklink=index&overridelayout=true]
[Best-Practices for Building State-of-the-Art Web Dynpro Java User Interfaces - Exercises|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50568365-ba9e-2b10-1188-a612a20edf31?quicklink=index&overridelayout=true]
Regards
Jeetendra

My new iPad 32G will not connect to my mac Mini using WiFi. Any suggestions for a solution?

Happy New Year,
I am attempting to get Facetime on my new Mac Mini to connect to Facetime on my new iPad 32 G through my WiFi router. It rings on the iPad but after clicking on Accept, all it does is try to connect with no success. I have tried to reverse the order of the connection (iPad to the Mac Mini) but no success. The problem seems to be with the Mac Mini as I have been able to connect my iPad Facetime to my local authorized Apple dealer Facetime software both ways (i.e.I have connected with them and they have been able to connect with me.) Has anyone got any suggestions to resolve my problem?

There is some wifi troubleshooting on this page which might, or might not, help : http://support.apple.com/kb/TS1398

Solutions and/or suggestions for documenting ADF Faces projects

Hello everybody,
does anyone have solutions and/or suggestions for documenting ADF Faces projects? For C, C++, C#, PHP and Java projects we use Doxygen, but what to use für ADF Faces projects?
Thank you in advance for your tips!

Hello everybody,
does anyone have solutions and/or suggestions for documenting ADF Faces projects? For C, C++, C#, PHP and Java projects we use Doxygen, but what to use für ADF Faces projects?
Thank you in advance for your tips!

I recently replaced the hard drive in my computer. I am afraid to download and reinstall itunes again because I worry about losing all the music I had on my iPod Nano. Any suggestions for solutions?

I recently replaced the hard drive in my computer. I am afraid to download and reinstall itunes again because I worry about losing all the music I had on my iPod Nano. Any suggestions for solutions?

The dragging does not work:
- Transfer iTunes purchases by:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
- For other music you will need a third-party program like one of those discused here:
Copy music
- Connect the iPod to your compouter and make a backup by right clicking on the iPod under Devices in iTunes and select Back Up.
- Restore the iPod from that backup
Nothe that the backup that iTunees makes does not include synced media like apps nd music.

Drive setup suggestion for multiple users editing simultaneously?

At work here, a city college, not a professional company or broadcast studio, so resources are limited, we often have three people editing HDV content simultaneously in Final Cut Pro.
Keeping the content on our multiple backup servers, there's simply too much network traffic to do this smoothly.
Instead of keeping projects locally spread across multiple machines, I would like one centralized place for everything, for the Macs to access directly over gigabit or something else.
So, what kind of setup do you guys suggest for this?
The machines here are two quad-core G5s (no RAID or fiber-channel right now), and a Core2Duo iMac, F400 only.
Again, it'd need to be able to handle three HDV projects going on simultaneously without skipping due to having to seek back and forth all over the drive.
Thanks.

Yes, an XSan system would perfectly fit the bill for what you want to do, but an XSAN is not a cheap solution. When it is all said and done, it will cost you tens of thousands of dollars.
The best, cheap solution would be to use Firewire drives. I would not duplicate a project onto three drives, because you will then always be trying to figure out which version is the most current. Instead, keep all of your project, capture scratch and render files on the firewire drives. Then move the drive to whichever computer you want to do the editing on.
Properly log & capture all your footage, then archive all your project files, because Firewire hard drives will fail over time, loosing all the info on the discs. I did say this was the cheap solution. "Cheap" does have its costs…

Suggestions for setting up external storage for video editing please?

I am just starting up as a one-man video-editing business, using a 24 inch iMac running Snow Leopard, with Final Cut Studio. I have realised I'll need an external hard drive for HD footage, and I also need to get some back-up solution in place. Looking for speedy i/o, I would like to connect via the ethernet port (if only eSata was included in the iMac, eh!)
I've been planning to get a Drobo, but looking around the forums I see that people say it's too slow for using as a working drive to keep all my source footage, so I've been looking at the G-tech 4 Tb, as it says it is designed for media-content production. Does anyone know if I could use two of the drives for working from and two as back up? Or would it be better to keep back-up entirely seperate, and get a Drobo for that for the G-tech to back up to?
But I am also wondering whether a Mac Mini could be a worthwhile addition to this set up? I find myself sitting around waiting for rendering to complete on clips in my timeline (not to mention exporting to Quicktime conversion!), and I wondered if I put a Mac mini with Xserve installed (Apple store offers this with two 500gb hard drives inside), maybe I could farm the rendering out to the mini while I get on with editing on my iMac? That would require two installations of FCP, which I thought was allowed, but just today in a forum I saw that one would have to be a laptop... anyone have any suggestions for getting rendering done without stopping FCP from doing other things simultaneously?
Also I don't know if that arrangement is even feasible... I see all these things like Xsan and Artbox... as a one workstation editing suite, does FCP handle all the dataflows for external working drive and external back ups okay without having to introduce more controllers?
And can anyone explain to me how I could set up an ethernet connection to an external hard drive, or does that require the extra controllers mentioned above? I've seen it said that you can do it via ethernet, but haven't seen how you can actually go about doing it.
Thanks for overlooking my newbie quality, any answers received with humble gratitude!
Cheers, Syd

Hi there,
as NLEdit said, there will be loads of answers to this.
IMO i'd avoid drobo like the plague. G tech drives have served me incredibly well working on a huge variety of broadcast projects (just over the water from you in Bristol), I've had no probs with FW800 when using DVCproHD, pro res is ok, sometimes a little slow with multiple layers and of course it eats up storage space. so I'd go for 2 4tb drives, keep the backup one in a different location.
one tip that has saved me countless times is to format them as follows:-
mac os extended (not journalled)
create 2 partitions
partition 1 - make this small (1gig) and call it "drive a - do not use"
partition 2 - the rest of available storage and call "drive a"
this is because the boot sector of the drive is within the first partition and with this method if it goes down it can be re erased without losing all your footage.
If you call your backup drive the exact same name and have the exact same folder structure, you will not have to relink if you get a problem.
Ignore getting a mac mini for rendering, won't help at all in FCP. instead I would make every attempt you can at buying a mac pro rather than an imac. much more expansion/speed possibilities and a more robust solution.
best of luck
Andy

I continue to receive message that "We could not complete your iTunes Store request. An unknown error occurred (4002). Please try again later." This has been happening every time iTunes Match runs in background. Any suggestions for a cure?

I continue to receive message that "We could not complete your iTunes Store request. An unknown error occurred (4002). Please try again later." This has been happening every time iTunes Match runs in background. Any suggestions for a cure?

Found a potential solution here:
https://discussions.apple.com/thread/4332757
Gsleeroy
Re: error 4002 in itunes match do you have a solution?
Sep 23, 2012 10:08 AM (in response to matracaelcan)
Hi All,
I had this problem today myself, and was frustrated repeatedly by the '4002' error.
I have literally just fixed the issue by doing the following steps:
1: Go to the 'Store' tab and select 'Turn Off iTunes Match'
2: Return to the 'Store' tab and select 'Update Genius'
3: Wait for this to complete succesfully, the return to the 'Store' tab once more and select 'Turn On iTunes Match'.
4: iTunes Match will now go through the motions and should succeed!
I hope this helps

Need a Suggestion For implementing the Digital Signature For the Documents

Hi,
Currently I am working in a Document Management System. I need a Good Suggestion for how to implement a Digital Signature For the Documents.
Thanks in Advance
Sabarish V

Hmm, if you are not using Oracle Payroll, what are you using for payroll? I am wondering why you could not use your payroll system, whatever it is, to handle this reimbursement program.
Well, you may want to talk to Oracle support about how to handle this in Oracle iExpense. You can certainly handle advances for Expense Reports. You would then apply the advance to the expense report items. The catch is I don't think you can stop expense item entry after the adavance is satisfied. You would have to set up a work flow process of some kind to have the expense reports reviewed and only approve expenses that are applied to the advance, is what I am thinking. Not your ideal solution, but something to think about. It could be the Oracle folks might know of a sneaky way to handle this. What you are trying to do is unusual. Employee advances are common, but the idea of not being able to exceed the advance amount is what unusual about this. Normally you will accept any expenses over the advance amount and reimburse the employee for those extra amounts not advanced.
Good luck.
John Dickey

Suggestions for NAS for home network and remote access to clients

I have a photo studio in my home and will need to get the digital files to my clients roughly once a week. i am currently using dropbox, but was thinking of purchasing a NAS that I could use for this purpose,as well as for my home network needs, mainly itunes and photos of the kid...
any suggestions for a mac friendly NAS , and how it can be accesed by my client over the internet?
can a NAS be accessed like a FTP site, using fetch or another FTP client?
thank for any help.
-thomas

Hi Thomas,
I have had similar considerations and finally chose QNAP 439 Pro II over the many other ones out there (LinkSys, NetGear, Bufallo, etc.). Without going into technical details, the main reason for my choice were easy-of-use, functionalities and scalability:
http://www.qnap.com/prodetail_feature.asp?pid=148
It's not the cheapest solution out there, but works great with the Mac, even acts as storage solution for TimeMachine (with latest firm ware). And implementing client access is easy.
Hope this helps.
Kind regards,
Mark

Need suggestion for USB Bluetooth Adapter for HP Z230 Workstation

I've just purchased an HP Z230 Workstation, with an I7 processor. I need to equip it with Bluetooth capability so that I can connect the computer to an old Palm Tungsten T2.
There are gobs of USB 4.0 Bluetooth adapters / dongles on the market, but reading buyer's comments, they all seem to have some type of problem with compatibility or installation issues on something.
Does anyone have a suggestion for a USB Bluetooth adapter that has worked well with the Z230?
Thanks in advance for any help.
Terry
This question was solved.
View Solution.

I suggest joining the Enterprise Buisness forum and posting your query there.
Your HP Z230 Workstation is a business class HP product and not than a consumer class device. This is the HP Consumer support forum.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Suggestions for stereo solution

Similar Messages

Maybe you are looking for