Suggestions for the interactive guide

I have been using FIOS TV service now for several months, and seen several iterations of the guide come through. I have a number of issues I would like to suggest for improvements.
First a suggestion about DVR and show recording. I have 2 DVRs, as we record a lot of TV and need the 4 tuners. I love that I can access recordings from either DVR as I want. However, it would be really great if I could just have a single schedule of shows set to record and let the two DVR's figure out what should record where based on the availability of tuners in the DVR's which would not produce conflicts.
I essentially need to put together my own matrix in order to figure out what set to record on which DVR based on when shows air. It would be great if the DVRs could talk to each other and intelligently figure out where to record.
A big issue I have encountered is that sometimes only part of a show will record. The biggest issue has been because for whatever reason, CBS's "Person of Interest" has only recorded 30 minutes of the show, and only the latter 30 minutes. There was no indication on the scheduled recordings view that the show would only partially record, it just showed that it would record. For most shows at least, they will either re-air the show, or I can get caught up on one of several streaming services. This is the only show that is not available as a re-run or on ANY streaming service.
If a show is going to only partially record, it should be clearly indicated, and it actually should just not record - it should show to me that there is an issue or conflict with another show recording into the 1st half of this show which would prevent a full recording. This is a huge bug in the recording logic that should be fixed.
From the menu guides, I would really like the option to set the default menu starting point. I do not way ANY pay preview, or pay for any on demand content. I have never done that with any TV provider I have had, and I don't plan to start now, the fact that the menu always defaults to searching on demand is annoying.
The entire menu experience feels not as if its designed to allow me to easily or quickly navigate and make the changes or selections I want, but instead it constantly wants me to basically buy a movie or TV show. There are plenty of ways to design an interface which allows you to promote your pay services and also allow me to get into the areas of the menu I need in an intuitive manner.
I do like that the DVR remembers some of my recent searches, a nice feature. It would be great for homes with multiple DVRs to allow the DVR's to act more as a "single unit" and share that information between the units so I don't have to go figuring out which DVR I previously searched for something. The search menu should also allow you to set some basic filters - when I go into search, 99% of the time I am going to search for something specific - the title of a movie or TV show. The search results should show me just that, I don't need to see actors or all the other options when I search by default - I should be able to go into advanced search to get broader or complex with what I am searching for. I should also be able to turn off searching in certain areas - like pay-per-view or on-demand options.
P.S. - the spell check component of the post message feature should really have "FIOS" and "DVR" in the dictionary.

sbobcat wrote:
I have been using FIOS TV service now for several months, and seen several iterations of the guide come through. I have a number of issues I would like to suggest for improvements.
First a suggestion about DVR and show recording. I have 2 DVRs, as we record a lot of TV and need the 4 tuners. I love that I can access recordings from either DVR as I want. However, it would be really great if I could just have a single schedule of shows set to record and let the two DVR's figure out what should record where based on the availability of tuners in the DVR's which would not produce conflicts.
I essentially need to put together my own matrix in order to figure out what set to record on which DVR based on when shows air. It would be great if the DVRs could talk to each other and intelligently figure out where to record.
A big issue I have encountered is that sometimes only part of a show will record. The biggest issue has been because for whatever reason, CBS's "Person of Interest" has only recorded 30 minutes of the show, and only the latter 30 minutes. There was no indication on the scheduled recordings view that the show would only partially record, it just showed that it would record. For most shows at least, they will either re-air the show, or I can get caught up on one of several streaming services. This is the only show that is not available as a re-run or on ANY streaming service.
If a show is going to only partially record, it should be clearly indicated, and it actually should just not record - it should show to me that there is an issue or conflict with another show recording into the 1st half of this show which would prevent a full recording. This is a huge bug in the recording logic that should be fixed.
From the menu guides, I would really like the option to set the default menu starting point. I do not way ANY pay preview, or pay for any on demand content. I have never done that with any TV provider I have had, and I don't plan to start now, the fact that the menu always defaults to searching on demand is annoying.
The entire menu experience feels not as if its designed to allow me to easily or quickly navigate and make the changes or selections I want, but instead it constantly wants me to basically buy a movie or TV show. There are plenty of ways to design an interface which allows you to promote your pay services and also allow me to get into the areas of the menu I need in an intuitive manner.
I do like that the DVR remembers some of my recent searches, a nice feature. It would be great for homes with multiple DVRs to allow the DVR's to act more as a "single unit" and share that information between the units so I don't have to go figuring out which DVR I previously searched for something. The search menu should also allow you to set some basic filters - when I go into search, 99% of the time I am going to search for something specific - the title of a movie or TV show. The search results should show me just that, I don't need to see actors or all the other options when I search by default - I should be able to go into advanced search to get broader or complex with what I am searching for. I should also be able to turn off searching in certain areas - like pay-per-view or on-demand options.
P.S. - the spell check component of the post message feature should really have "FIOS" and "DVR" in the dictionary.
Hello,
Nice post!!
A couple of things:
Suggestions for FiOS TV programming (or for any Verizon service/product/offering on the internet, telephone or TV) can be made on the 'Idea Exchange' section of the forum where it'll be noticed more by other Verizon community members as well as Verizon employees who can bring up individual ideas to the appropriate teams.
Also, forum members can vote on the posted idea for greater emphasis.
Please see:
http://forums.verizon.com/t5/Verizon-Idea-Exchange-FAQs/Idea-Exchange-FAQs/td-p/231267 for more details.
The direct link to the Idea Exchange section is found here:
http://forums.verizon.com/t5/Verizon-Idea-Exchange/ct-p/ideaexchange
Some of your recommendations may very well have been posted by other folks!

Similar Messages

TITLE for the Interactive report

Hi,
I like to show a Title for the Interactive Report in several different languages.
But it seems if I just pick Interactive report, there will be no Title shown.
What is proper way of doing this ?
So, what I did was, I created a HTNL region, just to show the Title, but it seems the translation and XLF file doesn't pick it up
Please help
--John

I have further to report.
It looks like a bug.
The REGION title text is missing in "TRANSLATE APPLICATION" in "SHARED COMPONENTS" under WINDOWS environment.
The REGION title text is in SUN environment, but does not shown as translated in the browser.
Thx
--John

I would like to make a suggestion for the next iso iphone 4-4s update. Include a seperate treble and bass switch. What do u people out there think about this

I would like to make a suggestion for the next iso itunes software update for the iphone 4-4s. Include a serperate treble and bass switch for the ipod on the iphone. What to you people out there think about this?

vince20 wrote:
Obviously you dont like listening to music on your ipod in iphone. The EQ is crap
Not true at all.
I listen to music on my iphone all the time.
It is your position that anyone who does not agree with you does not listen to music?
Really?
What a leap.

HT4623 when i doing my update my ipad 3 why the itunes show this message ? (the ipad could not be restored this device isn't eligible for the requested guid ) what can i do now please reply urgent thanks

when i doing my update my ipad 3 why the itunes show this message ? (the ipad could not be restored this device isn't eligible for the requested guid ) what can i do now please reply urgent thanks

Make sure you have the latest software on your computer (tap to enlarge image)

Is there any suggestion for the "SafeNamedCache was explicitly released"

I deployed the coherence-java-3.6.0-java on red had with core 2.6.18 with 64 bit.
Then the deployed the coherence-3.6.0-cpp on the same manchine and complied the example "hellogrid" and it works ok . No any error .
My requirement is to integrate the Coherence into the Nginx0.7.62 for my web server . And i wrote a thread pool for the NameCache::handle and get a newly hendle after a 5 seconds just because of the error "was explicitly released" . But it is not useful for solving the problem .
Anybody please give me a suggestion for the root cause of this problem .
Thanks .
And the configurate as follows which are all copied from the configurate file for the example "hellogrid"(coherence-cpp/examples/config/extend-server-config.xml and coherence-cpp/examples/config/extend-cache-config.xml):
extend-server-config.xm:
<?xml version="1.0"?>
<!DOCTYPE cache-config SYSTEM "cache-config.dtd">
<cache-config>
<defaults>
<serializer>pof</serializer>
</defaults>
<caching-scheme-mapping>
<cache-mapping>
<cache-name>dist-*</cache-name>
<scheme-name>example-distributed</scheme-name>
</cache-mapping>
<cache-mapping>
<cache-name>repl-*</cache-name>
<scheme-name>example-replicated</scheme-name>
</cache-mapping>
<cache-mapping>
<cache-name>local-*</cache-name>
<scheme-name>example-local</scheme-name>
</cache-mapping>
<cache-mapping>
<cache-name>*</cache-name>
<scheme-name>example-distributed</scheme-name>
</cache-mapping>
</caching-scheme-mapping>
<caching-schemes>
<distributed-scheme>
<scheme-name>example-distributed</scheme-name>
<service-name>DistributedCache</service-name>
<lease-granularity>member</lease-granularity>
<backing-map-scheme>
<local-scheme/>
</backing-map-scheme>
<autostart>true</autostart>
</distributed-scheme>
<replicated-scheme>
<scheme-name>example-replicated</scheme-name>
<service-name>ReplicatedCache</service-name>
<lease-granularity>member</lease-granularity>
<backing-map-scheme>
<local-scheme/>
</backing-map-scheme>
<autostart>true</autostart>
</replicated-scheme>
<local-scheme>
<scheme-name>example-local</scheme-name>
</local-scheme>
<invocation-scheme>
<scheme-name>example-invocation</scheme-name>
<service-name>InvocationService</service-name>
<autostart>true</autostart>
</invocation-scheme>
<proxy-scheme>
<scheme-name>example-proxy</scheme-name>
<service-name>ProxyService</service-name>
<thread-count system-property="tangosol.coherence.extend.threads">2</thread-count>
<acceptor-config>
<tcp-acceptor>
<local-address>
<address system-property="tangosol.coherence.extend.address">localhost</address>
<port system-property="tangosol.coherence.extend.port">9099</port>
</local-address>
</tcp-acceptor>
<outgoing-message-handler>
<request-timeout>5s</request-timeout>
</outgoing-message-handler>
</acceptor-config>
<autostart>true</autostart>
</proxy-scheme>
</caching-schemes>
</cache-config>
extend-cache-config.xml:
<?xml version="1.0"?>
<!DOCTYPE cache-config SYSTEM "cache-config.dtd">
<cache-config>
<defaults>
<serializer>pof</serializer>
</defaults>
<caching-scheme-mapping>
<cache-mapping>
<cache-name>local-*</cache-name>
<scheme-name>local-example</scheme-name>
</cache-mapping>
<cache-mapping>
<cache-name>near-*</cache-name>
<scheme-name>near-example</scheme-name>
</cache-mapping>
<cache-mapping>
<cache-name>dist-*</cache-name>
<scheme-name>extend-dist</scheme-name>
</cache-mapping>
</caching-scheme-mapping>
<caching-schemes>
<local-scheme>
<scheme-name>local-example</scheme-name>
</local-scheme>
<near-scheme>
<scheme-name>near-example</scheme-name>
<front-scheme>
<local-scheme>
<high-units>100</high-units>
<expiry-delay>1m</expiry-delay>
</local-scheme>
</front-scheme>
<back-scheme>
<remote-cache-scheme>
<scheme-ref>extend-dist</scheme-ref>
</remote-cache-scheme>
</back-scheme>
<invalidation-strategy>auto</invalidation-strategy>
</near-scheme>
<remote-cache-scheme>
<scheme-name>extend-dist</scheme-name>
<service-name>ExtendTcpCacheService</service-name>
<initiator-config>
<tcp-initiator>
<remote-addresses>
<socket-address>
<address system-property="tangosol.coherence.proxy.address">localhost</address>
<port system-property="tangosol.coherence.proxy.port">9099</port>
</socket-address>
<socket-address>
<address system-property="tangosol.coherence.proxy.address">127.0.0.1</address>
<port system-property="tangosol.coherence.proxy.port">9099</port>
</socket-address>
<socket-address>
<address system-property="tangosol.coherence.proxy.address">172.16.1.23</address>
<port system-property="tangosol.coherence.proxy.port">9099</port>
</socket-address>
</remote-addresses>
<connect-timeout>10s</connect-timeout>
</tcp-initiator>
<outgoing-message-handler>
<request-timeout>5s</request-timeout>
</outgoing-message-handler>
</initiator-config>
</remote-cache-scheme>
</caching-schemes>
</cache-config>
Anyone who knows the root cause please tell me . Thanks .

The original error shown in the console of the Coherence server as follows :
2010-11-23 22:27:33.742/1566.313 Oracle Coherence GE 3.6.0.0 <D5> (thread=Proxy:ProxyService:TcpAcceptorWorker:0, member=1): An exce
ption occurred while processing a PutRequest for Service=Proxy:ProxyService:TcpAcceptor: java.lang.IllegalStateException: SafeNamedC
ache was explicitly released
at com.tangosol.coherence.component.util.SafeNamedCache.ensureRunningNamedCache(SafeNamedCache.CDB:23)
at com.tangosol.coherence.component.util.SafeNamedCache.getRunningNamedCache(SafeNamedCache.CDB:1)
at com.tangosol.coherence.component.util.SafeNamedCache.put(SafeNamedCache.CDB:1)
at com.tangosol.coherence.component.net.extend.proxy.NamedCacheProxy.put$Router(NamedCacheProxy.CDB:1)
at com.tangosol.coherence.component.net.extend.proxy.NamedCacheProxy.put(NamedCacheProxy.CDB:2)
at com.tangosol.coherence.component.net.extend.messageFactory.NamedCacheFactory$PutRequest.onRun(NamedCacheFactory.CDB:6)
at com.tangosol.coherence.component.net.extend.message.Request.run(Request.CDB:4)
at com.tangosol.coherence.component.net.extend.proxy.NamedCacheProxy.onMessage(NamedCacheProxy.CDB:11)
at com.tangosol.coherence.component.net.extend.Channel.execute(Channel.CDB:39)
at com.tangosol.coherence.component.net.extend.Channel.receive(Channel.CDB:26)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Peer$DaemonPool$WrapperTask.run(Peer.CDB:9)
at com.tangosol.coherence.component.util.DaemonPool$WrapperTask.run(DaemonPool.CDB:32)
at com.tangosol.coherence.component.util.DaemonPool$Daemon.onNotify(DaemonPool.CDB:63)
at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
at java.lang.Thread.run(Thread.java:619)
It is shown again and again for any operation before the Coherence server is restart.

Can the photomerge plugin for the interactive layout for CS4

I was using the photomerge plugin for the interactive layout light box in CS5. Now that I have migrated onto CC 2014, will that plugin still work for CC 2014?

CS4 is an End of life product.
Please refer to:
John Nack on Adobe : Feedback, please: Photomerge in Photoshop
CS5 Photomerge vs CS4
Moving to Photoshop.
Regards
Rajshree

FAQ Nominations for the Install Guide

So I'm feeling kinda malicious, and I want to create some more work for Dusty and Dennis.
Do you guys n' gals have any suggestions for additions to the FAQ section in the Installation Guide? I'm looking for those questions that a lot of people have to ask during or soon after the installation phase. Stuff that lends insight into the way Arch works and little "gotchas" that occur during the install for some people.
Check out the latest revision of the doc for examples. Dennis has recently updated it.
http://www.archlinux.org/~judd/arch-install-guide.html
Other non-FAQ related suggestions are welcome too.

How about mentioning that the AMD K6 line of processors are i586, and won't work with Arch. We could say "Intel Pentium2/Celeron or AMD Athlon/Duron or newer i686 processors." Come to think of it, does Transmeta Crusoe count as i686? We could mention that too.
I keep mentioning this here, but I would like the focus to shift to the quickinst script. We could write a simple installation document detailing the quickinst installation procedure, explaining the most common things to do before and after installing (such as cfdisk, mkreiserfs, mkswap, lilo / grub). We could give an example for each of these to get things working on a typical system, and giving links to printable man pages online for those who need it.
Perhaps I should start working on this document myself, and post it here. Documentors, please let me know if you're interested.
In honesty, I believe the quickinst script would be easier to document. Especially since most of the work will be done by the user with external (stable, already well documented) tools.
0.7 should definitely be moving towards setting up UDev by default. This should be reflected in the documentation.
I've got to get going, but I'll post here again soon

Suggestion for the PlayBook Team

There have been suggestions made and issues identified with the PlayBook on this and other forums. Many of these are understandable with the initial release of a totally new product, new OS, and very limited development time.
My issue is more fundamental: What is the PlayBook supposed to be?
   1) Business Tool?
   2) Entertainment Device?
   3) Smartphone Extension/Enhancement?
It appears that PlayBook is trying to be "all of the above, to all people, and master of none"
The PlayBook was to be my business tool. Unfortunately it currently fails to meet my minimum business requirements. The functionality for the two other uses seems to be limited as well.
It would be helpful if the PlayBook Team conveyed the primary purpose of the PlayBook; and, concentrated development in that direction. This would provide a realistic expectations as to the future use of my PlayBook.

What is wrong with all of the above?
What's the focus of the iPad, Xoom and Tab?
I do believe you'll see it fulfill all three as apps develop and time passes. Obviously right now it's not serving your needs.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Can anyone please suggest for the following query relating to OEDQ ?

I have to process 10M records through batch matching by Oracle EDQ. There will be 10 file(.csv) each size 1M. They will be placed landing area of EDQ one by one separately. Given, All 10 file should have same number of columns & same order of columns. I have to process them one by one sequentially through only single batch contact match job.
Condition is :
Only one batch job will be executed 10 times to process them. At each iteration/operation, one file (.csv) will be taken as input in that job. As we know, only one source is present in job. I have to create /run ShellScript which will be passing one file to the single snapshot via single datastore from the landing area of EDQ. Once the one input file is passed and complete matching is done, Without changing anything, Is it possible to pass 2nd input file to that snapshot via previously created datastore by that Shell-script.
I mean, I want to pass one by one file sequentially via single snapshot via single datastore to a batch job using unix shellscript.
Is it feasible to consider in my project????
Any suggestion will be highly appreciated. Thanks in advance.

Hi Mike,
Thanks for the quick response.
Keeping in mind source will be changed sequentially/one after another but the target is constant & the same JOB will be executed each time.
suppose, I have two file in the landing area of EDQ. These file are: PersonData.csv and goutam.csv
PersonData.csv is used in current data store.
File in the working area: C:\Program Files\Datanomic\dnDirector\config\landingarea\PersonData.csv
Snapshot is using this datastore. I have right clicked on the snapshot. I have done setting externalize option enable.
I am using the command:
java -jar jmxtools.jar runopsjob -job "Testing for R3 source A" -project EDQ-CDS -runlabel Nov2014 -nowait -u dnadmin -p p4dqnvo2 localhost:9005
This command is successfully executing batch job "Testing for R3 source A " where source is PersonData.csv.
Now, I want to use the following command with externalize option to execute the file goutam.csv as source by the above job.
I am using the below command:
java -jar jmxtools.jar runopsjob -job "Testing for R3 source A" -project EDQ-CDS -runlabel Nov2014 -D externalized=goutam -nowait -u dnadmin -p p4dqnvo2 localhost:9005
this command also executes the file PersonData.csv instead of goutam.csv file. In the above command I have highlighted externalize option with deep black color . please let me know how I write this externalize option in the command so that it should execute goutam.csv file.
Meanwhile, I am googling to find solution.
Regards,
Goutam Samanta

Some puzzle for the 'Upgrade Guide: Release 11i to Release 12'

We are on 11.5.10.2 with 10g db,now we are going to upgrade to R12
I have done all the pre jobs in the 'Upgrade Guide: Release 11i to Release 12''s character 2 except the 'Prepare for the Upgrade' section.
In the 'Prepare for the Upgrade's step 3:Step 3 Run Rapid Install (required),it ask me to run Rapid Install wizard
But i can not understand what use of the action?
When run rapidwiz,should i close the app and db?or only keep the db running?
Anyone can help me?
Thanks!
Remen
2007.8.18

When run rapidwiz,should i install the R12's app to the same dict that the 11i's files locate?
Sample:
Before Upgrade the APPL_TOP=/u8/TEST/app/testappl,and the $AD_top=/U8/TEST/app/testappl/ad/11.5.0
After run rapidwiz,the dict will change to $AD_top=/U8/TEST/app/testappl/ad/12.0.0 automaticly??No need to create the dicts manualy??
Remen
2007.8.18

Looking for the developers guide

It seems that I can't find a link to the developers guide.
Can anyone point me to it ??
Thanks a lot.

http://www.oracle.com/technology/products/webcenter/documentation.html
Documentation
On this page, you can access the latest documentation set for Oracle WebCenter Suite. You can view the complete Documentation Library CD here. For information about the Oracle Application Server, refer to the Oracle Application Server home page.
Technical Information
Focus Area Divider.
Getting Started
Focus Area Bullet.      Oracle WebCenter Framework Tutorial HTML | PDF
Focus Area Bullet.      Oracle WebCenter Framework Tutorial Sample Files (Required for the Tutorial) ZIP
Focus Area Bullet.      Glossary HTML
Building a WebCenter Application
Focus Area Bullet.      Developer's Guide HTML | PDF
Troubleshooting Your WebCenter Application
Focus Area Bullet.      Release Notes Linux | Windows
Focus Area Bullet.      Error Messages Guide HTML | PDF

Where can I leave suggestion for the manufacturers???

Anybody knows where can suggestions can be posted for the future improvements for the software to our Ipods??
Some things that I'd love to see in the next Ipods or software are:
- Scrolling of the whole album name, Artist name on the screen of the Ipod
- During the mode sleep would be nice to set the volume low level for sleep and for "alarm" mode it would be perfect wake up with a louder volume.
- For the clock settings moving the digits each one 9,8,7,6,5,4,3,2,1,0 independently instead to go around the clock for 12 hours everytime when a new alarm is set.
- Timer for sleep if could be "open" to everybody own time it would be great other than 15 mins 30 mins 60 mins etc there 1,2,3,4,5,6,7,8,9 etc much better in this case for sleep.
I wish that the people that is involved with the development and manufacturing of our favorite player could do something about it otherwise who else???
Share this message all around if there something can be done it is here and is with apple.
Any ideas around???
Thank you all for the interest and enthusiasm!!!
5 gen Windows XP Pro
5gen Windows XP Pro
5 gen Windows XP Pro

Hey!
Try hereApple Feed Back
Cheers,
John
iMac G5 1.8GHz 20" Mac OS X (10.4.7) ipod 30GB Video Black v.1.2 Agent 18 Case iTunes 7.0.1 Bose Sounddock

HT3275 Any other suggestions for the message the backup volume is read only

I keep getting the message Time machine is unable to complete the backup because it appears the backup volume is read only. I've tried the suggested repairs from apple for this but keep getting the same problem. Any suggestions?

The Master of the Time Machine, Pondini has extensive documentation and he mentions your particular problem in the following link.
http://pondini.org/TM/C6.html

Any printer suggestions for the ibook g4

I am completely overwhelmed and in need of some suggestion of the most compatable printer for the ibook g4. Mine is a 2004 model

Hi Hotrodgirlly,
Welcome to Apple Discussions
What are you going to use the computer for and what features do you want(example: mostly printing documents, normal amount of pictures, professional photography, as well as all-in-one, scanner, fax, fast printing, portability, quality of print outs, etc)? Price range?
You may want to look at the following threads...
http://discussions.apple.com/thread.jspa?messageID=1718307
http://discussions.apple.com/thread.jspa?messageID=1198652
http://discussions.apple.com/thread.jspa?messageID=1858479
http://discussions.apple.com/thread.jspa?messageID=594421
There are a ton of posts in Apple Discussions alone that can help you make a decision or narrow down your options. I suggest searching AD, Google, and any other search engine on the internet. Consumer Reports probably has a review section on new printers, but you can either buy it in the store or buy an online subscription (I believe).
Jon
Macbook 2.0 White (100Gb HD 2Gb RAM) Mac Mini 1.42Ghz, iPod (All), Airport (Graphite & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more... Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..

Album suggestions for the music store

Has anyone suggested albums for the music store and actually gotten it listed for sale? I've suggested a few and just wondering if this is a waste of time

I will keep suggesting, I no longer like ordering cds. But if the music store does nothing with the suggestions then I'll have to do that.
It would be nice if they could post whether or not they could get the album but I doubt if they will ever have the manpower to do that

Suggestions for the interactive guide

Similar Messages

Maybe you are looking for