Suggestions Needed for Wireless Mu

I have not been successful installing the Wireless Music product to my network. I hope someone can offer a suggestion.
I have a Linksys Wireless Router (WRT54G) that I have used for quite some time without problems. It has the latest firmware. I have both B and G enabled, DHCP is enabled, UPnP is enabled and I entered the correct WEP-28 settings.
The latest drivers, utilities and firmware from Creative are loaded on the Wireless Music devices.
During the setup process, the device tries to acquire an IP address for quite some time before the informationless error message appears. (I assume the problem is with IP address acquirement, since it happens after the DHCP wizard screen.
Any suggestions?

Eterry,
Check out this kbase article for suggestions on how to check the network configuration of the SB Wireless Music.

http://ask.americas.creative.com/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=ww_english,Company={CEAE26D-879-4C00-AC9F-03BC258F7B70},VARSET=ws:http://us.creative.com/,case=580

Jeremy

Message Edited by Jeremy-CL on 0-5-2004 2:02 AM

Similar Messages

Help needed for wireless printing.

Hi
I have tried to set up my printer via the USB connection on the TC and the printer shows up in the Airport Utility, but won't print. When I run network diagnostics, it shows that everything works OK and then the server goes from green to red.
The odd thing is that the printer then prints ' Internal error- incomplete session by time out'.
When I go through the diagnostics I get the following. message. NetworkDiagnostics was able to connect to the internet but not to the server "Samsung SCX-4500 Series.riousbprint.tcp.local
Can anyone suggest a way to get the printer working.
I am new to Mac's and networking so an 'idiots guide' type fix would be much appreciated.
Thanks
M

When I go in to do a design with a customer, I make sure I understand the devices that need to use the wireless. Some things you already know about (the usual wireless devices). Devices that might impact business, you need the customer to provide info on that device or a contact for that device. This way you can make sure their requirements are meet. It doesn't really matter what AP's you use as long as you know what you need to configure to make things work.
I would go with a WLC 5508 and the 3500i (internal antenna). This WLC has various options for license and depending on how many AP's you need, you can satifiy that with a base license or adding license if you add more later. YOu can also look at the 1142 AP's, but the 3500 will provide you with the capability of doing CleanAir.
WLC 5508 Licesne (table 3): http://www.cisco.com/en/US/prod/collateral/wireless/ps6302/ps8322/ps10315/data_sheet_c78-521631.html
CleanAir Technology: http://www.cisco.com/en/US/netsol/ns1070/index.html

Urgent Suggestions needed for best way to solve the problm

Hi Everybody,
I am working on an application which has to graphically show the data in the database. We are using JSP for the front end (the view for the time being will be simple, with text boxes and frames and DHTML) and tomcat as the Server. The data is huge and there ain't much business logic involvd (the user when he clicks on a URL I get the data pertaining to that particular table or column). Now my question is can Tomcat handle such huge data. What do u guys suggest, should I cache data at my server and server to the clients (instead of connecting to the DB for each and every request) If yes, can you guys please suggest a good way to cache data, I mean hat TableModel or HashMap will store data from different tables. Also the DB isn't updated for a while everyday. Also let me know if any of u guys still think a 3 -tier approach is advisable instead of the 2-tir approach
Thanks guys who made it this far

Well, of course a 3-tier approach is advisable. Also, yes, Tomcat can handle what you are doing. As far as caching data on the server, that is going to depend on your database and other requirements. Now about the graphical nature, you aren't going to be able to use JSP to draw graphics. The only way you can do it is to draw the graphics on the server-side, write out JPG files, but then the JSP won't know anything about where the image is, unless you always write the same number of images, in the same place, every time. Otherwise, you need an Applet. Hope that helps.

........ Expert suggestion needed for Loading Data in DB

Hi all
The current requirement we have is to Load data from Excel File to oracle Databases.
The Excel file has around 30 Sheets , each corresponds to a table, ( means 30 tables in the database) .
Currently we are using sqlldr commands to load data from CSV files to the Oracle Database. The only problem is that sometime the DBA has to go out or is busy workign on somthing else, so May i kindy get some expert suggestions on how to automate this DataLoading Task.
Somebody has suggested to My Manager ( who is not aware of oracle and IT at all) that data can be loaded via ODBC. It is suggested to him that all we need to do is to place the CSV files on the Server at a particular folder and Oracle will do the rest.
I am not that proficient in Data loading methods.. so may i know any technique which will simplify/automate the Task.
I mean how can we automate so that every time , the the sql loader scripts run at command promt. I think data base ( Oracle ) as nothing to do with command promt i feel. isnt it ..
Kindly have ur expert./experienced suggestions.
I would be highly grateful to all
Regards

To automate sqlldr scripts, you would usually write a OS script file that will periodically looks for files in a given directory and run the sqlldr commands:
- on Windows: .bat or .wsh files to be scheduled with "at" command or windows scheduled tasks tool
- on Unix: a script shell in the crontab.
Much more complicate but without any OS script:
- write a PL/SQL code to read, parse the file to be loaded using UTL_FILE
package
- this PL/SQL code must also generate INSERT statements and process errors ...
- this PL/SQL code can be scheduled with DBMS_JOB package to run a periodic intervals.
Message was edited by:
Pierre Forstmann

Suggestion needed for processing Big Files in Oracle B2B

Hi,
We are doing a feasibility study for Using Oracle AS Integration B2B over TIBCO. We are presently using TIBCO for our B2B transactions. Now since my client company planning to Implement Fusion Middleware (Oracle ESB and Oracle BPEL), we are also looking at Oracle AS Integration B2B for B2B transactions (On other words we are planning to replace TIBCO by Oracle Integration B2B if possible).
I am really concern about one thing that is receiving and processing any "BIG FILE" (15 MB of size) from trading partner.
Present Scenario: One of our trading partner is sending Invoice documents in a single file and that file size can grow upto 15 MB of size. In our existing scenario when we receive such big files from trading partner (through TIBCO Business Connect - BC), Tibco BC works fine for 1 or 2 files but it crashes once it received multiple files of such size. What exactly happening is Whatever Memory that TIBCO BC is consuming to receive one such big file, are not getting released after processing and as a result TIBCO BC throws "OUT OF MEMORY" error after processing some files.
My questions:
     1. How robust the Oracle AS Integration B2B is, in terms of processing such big files?
     2. Is there any upper limit in terms of size that Oracle AS Integration B2B can handle for receiving and processing data?
     3. What is the average time required to receive and process such big file? (Lets say we are talking about 15MB of size).
     4. Is there any documentation availble that talks about any such big files through Oracle B2B?
Please let me know if you need more information.
Thanks in advance.
Regards,
--Kaushik

Hi Ramesh,
Thanks for your comment. We will try to do POC ASAP. I will definitely keep in touch with you during this.
Thanks bunch.
Regards,
--Kaushik

Suggestions needed for NAS

I'm looking at upgrading my home kit. I want to ditch the MDD and get a laptop instead (it's a space issue). As this is going to remove 1TB of available storage, I'm after a NAS to replace it. Can anyone recommend one based on the following criteria, in order of importance:
1. It must be quiet. This is non-negotiable. I have a small flat and there's nowhere discreet to put a noisy box.
2. There must be some data safety. Ideally, I'd like to use this as the backup device for the laptop as well as bulk data storage and I'd like to RAID it if possible. So a single disk is out.
3. Future-proof. Ideally, it'll be upgradeable. I may need more space in the future.
I've been looking at QNAP, Netgear's ReadyNAS and D-Link's DNS323, but there's very little info on noise specs. And I don't take marketing speak at face value, so personal recommendations please.

Basic Backup
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Retrospect Desktop (Commercial - not yet universal binary)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. PsynchX 2.1.1 and RsyncX 2.1 (Freeware)
6. Carbon Copy Cloner (Freeware - 3.0 is a Universal Binary)
7. SuperDuper! (Commercial)
The following utilities can also be used for backup, but cannot create bootable clones:
1. Backup (requires a .Mac account with Apple both to get the software and to use it.)
2. Toast
3. Impression
4. arRSync
Apple's Backup is a full backup tool capable of also backing up across multiple media such as CD/DVD. However, it cannot create bootable backups. It is primarily an "archiving" utility as are the other two.
Impression and Toast are disk image based backups, only. Particularly useful if you need to backup to CD/DVD across multiple media.
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore. Also read How to Back Up and Restore Your Files.
Although a USB drive will also work they are much slower than Firewire drives.

Suggestions needed for backing up MacBook?

What's the easiest way for my daughter to back-up her MacBook? She has a USB external hard drive. Thanks, Bill

Basic Backup
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Retrospect Desktop (Commercial - not yet universal binary)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. PsynchX 2.1.1 and RsyncX 2.1 (Freeware)
6. Carbon Copy Cloner (Freeware - 3.0 is a Universal Binary)
7. SuperDuper! (Commercial)
The following utilities can also be used for backup, but cannot create bootable clones:
1. Backup (requires a .Mac account with Apple both to get the software and to use it.)
2. Toast
3. Impression
4. arRSync
Apple's Backup is a full backup tool capable of also backing up across multiple media such as CD/DVD. However, it cannot create bootable backups. It is primarily an "archiving" utility as are the other two.
Impression and Toast are disk image based backups, only. Particularly useful if you need to backup to CD/DVD across multiple media.
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore. Also read How to Back Up and Restore Your Files.
Although a USB drive will also work they are much slower than Firewire drives.

Suggestions needed for ADF Faces & JDeveloper 10.1.3.4 af:menu

Hi all,
We are running out space on our top level menu items and was curious if anyone has alternatives for a dynamic menu structure built using JDeveloper 10.1.3.4. Here is what our screen looks like:
Any suggestions are much appreciated.
Thanks,
Wes

Hi again Wes,
If you want to keep using the ADF Faces menus... get a larger screen? :P
Seriously, though, [url http://www.simplica.com/menu.htm]Simplica has an interesting-looking menu component that perhaps you could use (it looks much like the ADF Faces Rich Client menus). I've not tried the components, but have seen them - no idea if they would work "well" with ADF Faces.
Best,
John

Suggestions needed for replicating program RPRAPA00

Hi,
We are thinking of replicating program RPRAPA00 using Z-program, Can anyone give idea on how to to go about it? we tried using user-exit for our purpose and raise message to SAP but it din't help, so we planned to make a Z-copy.
Thanks in advance
Amar.

Resolved Myself

Suggestions needed for Export/Import Business Area Problem

I'm trying to export/import a Business Area from one instance to another and I get the following error during import processes.
Database Error - ORA-00001: unique constraint (EUL4_US.EUL4_EXP_PK) violated
The Business Area I'm trying to import doesn't exists in new instance. During the import wizard I've checked refresh existing object and match by identifiers.
I think my target instance has objects with same identifiers, so I went ahead and changed the identifiers in my source, but still problem persists. How can I correct this error?
Thanks

Did you happen to copy the EUL from one database to another before you were importing/exporting the BA?
Discoverer recognizes EULs using unique reference numbers. However, if you use the database export and import utilities to copy an EUL, the new EUL (including its reference number) will be identical to the original EUL. When EULs have the same reference number, EUL consistency issues can arise if you do both of the following:
* If you modify objects in both the original EUL and in the new EUL
* Having modified objects in both EULs, if you then attempt to copy objects between the two EULs using the Discoverer Export Wizard and Import Wizard (or the Discoverer /export and /import commands)
To avoid potential EUL consistency issues, run the eul5_id.sql script as the owner of the new EUL. The eul5_id.sql script gives a new refererence number to the new EUL and thereby avoids any potential EUL consistency issues.
Reference
* How to import an EUL using the standard database import utility
http://download-west.oracle.com/docs/html/B13916_04/maintain_eul.htm#i1008632
For 4i, you will ned to run:
sql> update EUL4_VERSIONS set VER_EUL_TIMESTAMP =TO_CHAR(SYSDATE, 'YYYYMMDDHH24MISS');
sql> commit;
Some similar EUL inconsistencies are documented in:
Note.267476.1 Discoverer Workbook Fails With 'Cannot join tables.Item dependency "" not found in EUL' After EUL Migration, Importing Or Cloning
You might want to check that if the EUL version timestamps are the same.
~Steve.

Suggestions needed for blackberry 8330 curve

Hi
I have a Blackberry 8330 Curve and am on Verizon. Saturday night my messaging system decided on it's own to separate all my messages. Some of the saved ones I have are now dated 12/5 (were from august!). On top of that when my email is downloaded into my Outlook account the emails are no longer taken off the phone. It is very very hard to open up any of my messages-usually takes 2 or 3 clicks to get them open. Am able to send emails and messages.
Another problem is that I can not update information or comment on people's status on Facebook. This isn't a big problem but is frustrating to me.
I have occasionally been getting this error message: uncaught exception:Java.lang.ArrayIndexOutofBoundsException
I
have rebooted multiple times went to Verizon & this very unhelpful man said all he could do is wipe my phone since there was not a technician there that was proficient on Blackberry.
Any suggestions are welcomed!
Thanks
Kitty

Unfortunately no, the 8330 does not have a wi-fi adapter built into the device. The 8320 does have it however.
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

I need a wireless usb adaptor for a Power Mac G4... any suggestions? (needs to be compatible)

I need a wireless usb adaptor for a Power Mac G4... any suggestions? (needs to be compatible)

With Mac OS X 10.3 or higher, a number of USB Wi-Fi adapters would be possible to use. However, for an earlier operating system, a wireless Ethernet bridge (such as the examples below) can be a better (and sometimes the only) option. A wireless Ethernet bridge does not normally require special drivers, and can thus be used with almost any Ethernet-equipped computer.
http://www.netgear.com/landing/wnce2001.aspx
http://support.linksys.com/en-us/support/bridges/WET610N
Jan

I cannot connect a Sony ILCE6000 camera for wireless downloading. Sony feels I need DLNE? They do not know how to make it work. Can anyone help OS10·9·5

I cannot connect a Sony ILCE6000 camera for wireless downloading. Sony feels I need DLNE? They do not know how to make it work. Can anyone help OS10·9·5

I cannot use the software.. so you need to figure out where the problem is..
But let me suggest.. the Mac is not the issue and likely the info from Sony is also up the creek.. they make PC's after all.
It is far more likely the camera is having issues with the wireless network.
Do you know you have a connection to the home network on the camera.. ?? You have an IP address and some internet or local access at least?
How you will discover those things is by fiddling.. but if you can tell me what wireless AP you are using that will help.

Suggestions for wireless headphones

Hi everybody,
I need a little advice here if anyone can help.
I sit in an open office, working merrily away on my iMac, but would like to listen to iTunes without disrupting the rest of the office.
I have some earphones that I can plug in to the back of the iMac but the cable get's in the way when it trails across the desk, so can anyone suggest any good wireless headphones that will work with a 24" Intel iMac?
Thanks in advance.
Simon

80-150 $$$ .... Dont buy wireless. For that money you can buy very very good normal headphones. If you want my personal, and best headphones : http://www.sennheiser.com/sennheiser/homeen.nsf/root/privateheadphones

Do I need a wireless keyboard for video editing,as not Yao much desk room

Do I need a wireless keyboard + mouse to video editing and bit off gaming
Not much desk room
any help/advice

If you look at the 2013 Retina models in the Apple store, you'll see the higher end version has both the Intel Iris and an additional Nvidia graphics module. The higher end models have this additional circuit, which is to provide faster and smoother graphics for video, games, etc.
I'd suggest looking at both model benchmarks at everymac.com. Here's the 2012:
https://www.everymac.com/systems/apple/macbook_pro/macbook-pro-unibody-faq/macbo ok-pro-13-15-mid-2012-performance-benchmark-comparison.html

Suggestions Needed for Wireless Mu

Similar Messages

Maybe you are looking for