Suggestions - predictive text and text entry

I don't know if this forum is intended for suggestions but here are a couple anyway.
1. Because email and sms text do not operate in landscape mode the keyboard is very small. This leads to a large number of text entry errors compared to ther devices I have used. The screen sensitivity is excellent so this is ont a problem with using a touch device. Allowing landscape data entry would go a long wawy to solving this problem - the keyboard when used with safari in landscape mode is a lot better (perhaps 10% of the missed keys). An alternative which would be better for single handed use would be to ditch the qwerty layout and have a key pad that runs to 4 or 5 rows of keys instead of 3. In most cases it is only neccesary to see a single line of text entry so there is plenty of screen re-estate to do this.
2. The predictive text feature on the iPhone is very poor. This is due to a fundamental error in its design. The current implementation assumes that the current word typed is complete but may be misspelled. To be more useful the feature needs to assume that the characters typed are correct and suggest complete words that start with the fragment available. The predictive text in Windows mobile is infinately better that that of the iPhone (and one of the few features I miss from my old phone!).
If this is the wrong place for posting these suggestion - sorry

This is a user to user forum. To submit feedback to Apple, use this form:
http://www.apple.com/feedback/iphone.html

Similar Messages

  • Selection text and text elements contents not displayed

    I have a language related problem
    I have 2 servers .
    In first server I logged in english language and the selection text and text elements are displayed in English.
    The requirement is I dont want to translate these texts it should be displayed in English only even if I log into SAP with other language.
    So if I log in german I see the texts in English in the first server.
    But this is not the case with second.
    If I log in with English I see the english texts but if I do in german I am not able to see this english text with proper contents .
    Can anybody let me know if there are any settings to be done ? As its working fine in first server but not in second .
    Edited by: Jalpa Shukla on Oct 22, 2008 11:19 AM

    Hello Jalpa Shukla,
    If you want to display the text in english language only better dont use Text-element
    instead of using text element you hard the text in the program then you will display the text in same in English.
    Try in this way, If not past the code i will give the solution

  • Standard Texts and Text Modules

    Hi,
    How to include standard texts and text modules in Adobe Print Forms?
    Is there any solution?
    Thanks !

    Hi
    You can call standard text and text modules by the following options :
    Create One Text Window by right clicking the option.  In this general attributes tab select the 'Text Type' as 'Text Module' and it will ask for the Name of the text module.
    Press f 4 help to select the text module.  And enter the language also.
    Thanks

  • Need to Update SELECTION TEXT and text symbols for report J_1IEWT_CERT.

    Hello Experts,
    My requirement is need to "Update SELECTION TEXT and text symbols for report J_1IEWT_CERT".
    1. As I want to change text sysmbols for 006 to "Run in preview mode". Currently it showing "Type of output". Issue I am facing here is that whenever I deleting aur changing the same it throws an error : "Text symbol 006 is an original text and cannot b
    deleted or renamed".  How can I do the same.
    2. Secondly I have to add two selection text also i.e. ZFATHER and PREV . And delete two selection text i.e. P_PDF and
    P_SCRIPT. In this Tab there is only a Icon of deleting not an Addition button .So How can I add two more selection text.
    Above are Manual Activities which is written in note 1486147. We already taken an acess key and it shows in editable mode but
    not able to add/deletin/modify selection text and text symbols.
    Please provide the solution as it is critical requirement.
    Reagrds,
    Supriya Bhatt.

    Hi Vishal Saxena,
    Just go through the screens and do it .
    [<li> Link1|http://4.bp.blogspot.com/_O5f8iAlgdNQ/SjoVqL9rnvI/AAAAAAAAEs4/fPG7IG9yGK4/s1600-h/3-716953.JPG]
    [<li> Link2|http://1.bp.blogspot.com/_O5f8iAlgdNQ/SjoVp3d9uEI/AAAAAAAAEso/ZxfkeNAiOZQ/s1600-h/1-715669.JPG]
    [<li> Link3|http://2.bp.blogspot.com/_O5f8iAlgdNQ/SjoVqIbpNpI/AAAAAAAAEsw/2ntYgX-i1Dc/s1600-h/2-716353.JPG]
    Thanks
    Venkat.O

  • Standard Text and Text element

    Hi Everyone,
                      Hope you all doing great.
    What is the difference between SAP Stadard text and Text elements? When and where to use these?
    I have got Terms and condition text for my quote O/P Document, Is it okay if i go with Standard text?
    What is the Text ID i have to use?
    Thank you
    Kris

    Hi
    Difference between  SAP Standard text and Text elements :
    SAP Standard text : The standard texts which have been already created and can be created
    Text Elements :  They are the elements which are available in VOTXN and are assigned while configuring text determination
    Regards
    Srinath

  • What is the difference between Standard text and Text Symbols?

    Hi,
                1.Difference between Standard text and text symbol,?
                2. Which we use Standard symbol?

    Text symbol
    Text symbols are symbols representing text elements. In fact, a text symbol can be defined for every text elements. The reading of the form is easier in the SAPscript editor. The name of the text symbol must not exceed 32 characters and its value 60 characters. The value assignement can be done in two ways:
    - Using the following command: "/: DEFINE &SYMBOL&='TEST_SYMBOLE'"
    - Using a standard text symbol.
    The text symbol value is temporary stored. When the print program finishes the execution, the text symbol does not exist anymore. The text symbol must have a value when it is declared.
    Also check this link,
    http://www.supinfo-projects.com/en/2005/forms_sapscript_en/5/
    Standard text are good, if you are using them in more than one SAPScript, because you have to maintain them only once, and not in every SAPScript.
    It is really good to write rarely changing texts into the SO10 standard texts (for example company name, and address).
    standard text is not always used in scripts. when ever u want to display some data u need to use standard text so that the data gets displayed. Say, u have a large piece of document which needs to be printed at end of script... rather than writing the whole thing in script, we create standard text using SO10 and then use the name along with standard text in script.

  • Difference between Include Text and Text Modules in Smartform?

    Hello Experts,
    I need to know the differences between Include Text and Text Modules in the Smartform.
    When we create a Text in smartform, the text type can be text element Or Include Text Or Text Module.
    Now i need to know the differences between Include Text and Text Module.
    Thanks and Best Regards,
    Suresh

    Hi Suresh,
    Kindly check the below link for Text Modules.
    [http://help.sap.com/saphelp_nw70/helpdata/EN/24/ccbd2a00c811d4b588006094192fe3/content.htm]
    For Include Text:
    [Include Text|http://help.sap.com/saphelp_nw70/helpdata/en/03/7560efcf0d11d3b565006094192fe3/content.htm]
    Regards,
    -Syed.

  • Text and text box is altered after I copy and past a frame between InDesign CS2 Documents

    I am using InDesign CS2 4.0.5 on a MAC G5 running 10.4.1
    HELP! I am working on a text book that has text picked up from multiple documents. These text frames have inset text. When I copy and paste the text frames, some of the text frames (but not all) loose the inset boundaries. Also some of the text changes so it now wraps. I have checked and double checked; I am using the same object styles and the same paragraph styles, the same character styles. I have even used the book feature to synchronize the styles. But without luck. I read the adobe tech note 333340 about CS2 files moved from Windows to Mac. I don't think any of these files would have been created on the MAC, but I am even having this problem on documents that I know were both created on the MAC. Any suggestions?

    This problem was fixed by reading the forum "InDesign CS2 kicking lines out of a text frame for no reason - Help?". Although my text wasn't moving to the next page, I tried changing all the documents to the same unit of measurement and the copy and past worked!!!

  • Iphone 4s-when wifi is off and I am away from my home connection can I receive and send texts and text messages?  I want to keep my wifi off to limit data (email etc) to when I want to check it.  Cellular is roaming"voice only" it says.Can I get texts?

    When my wifi is off and I'm away from my home connection - it shows wifi off (unless I turn it on to check my email etc.) - and in the settings cellular it shows "voice only". Will I be able to receive and send texts in those settings?  Or check voicemail.  I had wanted to keep my email from coming in all the time and only want to check it periodically - so I turn ON my wifi when I want to check my email.  But when my wifi was off away from home- I hadn't seemed to be getting my texts.  So- do I need to keep wifi roaming connected when away from home to receive and send my texts in real time.  (which is what I want) or am I still able to send and receive texts with my wifi off when I'm away from home.  (When I'm home I am connected to my home data plan automatically through wifi and I get texts when I'm home - but I'm thinking I'm not getting texts in real time - is it because my wifi is off when I'm away from home?  My cellular shows voice only when my wifi is off away from home.  Am I doing it right to receive and send texts away from home?  Or do I need to open up the wifi in order to receive and send text messages.  I know that I would need to turn on wifi roaming - which will use data - for email checking or sending - as well as to use browsing apps and now I'm guessing to receive voice messages I may have missed?  So do I need wifi on to receive texts too?  Thank you - GregorySC

    Hello GregorySC,
    In order to send and receive SMS or MMS messages, you will need to have an active cellular data or Wi-Fi connection.
    You will need these to send and receive iMessages:
    An iPhone, iPad, or iPod touch
    iOS 5.0 or later
    A cellular data connection or a Wi-Fi connection
    A phone number or Apple ID registered with iMessage in Settings > Messages
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Cheers,
    Allen

  • Text and text box unavailable

    Used iWeb 09 to build a web page with a template: Now the left column is unavailable for edit or selection as a text box. If I "select all", it is selected with all other elements on the page--and I can move the box--but still can't edit the text in the box. Any help appreciated

    Fix: Make hyperlinks inactive!

  • Creating text and text frames

    This question was posted in response to the following article: http://help.adobe.com/en_US/indesign/cs/using/WSa285fff53dea4f8617383751001ea8cb3f-6fb2a.h tml

    I did try to experiment and verify this detail with Baseline grid, but no precedence seems to apply :
    «If Grids In Back is selected in Grids Preferences, then frame-based baseline grids take precedence over document-based baseline grids. If Grids In Back is not selected, then document-based baseline grids take precedence over frame-based baseline grids.»
    I have tried with (in all examples the text align to baseline grid have been verified)
    • a text box with a custom baseline grid and a baseline grid for the document (both with different increments),
    • a text box WITHOUT a custom baseline grid OVER a text box with a custom baseline grid and a baseline grid for the document (both with different increments)
    In any way I could have experiment some layer taking precedence on the other.
    Is there something i'm missing ?
    Regards,

  • Failed to send text and text message color?

    Hey Guys, well yesterday I got my Iphone 4 and activated it earlier today with a T-Mobile micro sim card and after I entered in all of my contacts , I tried to send a text to my friend but it failed and it noticed that when tried to send it the text color was green then i sent another text to a different friend and this time it was blue. My brother told it that the blue text good for iphone users while green was good for anything other than iphone. I turned off  "enable 3g" and cellular data and I turned on mms messaging, "send as SMS'', and group messaging and I tried again to send the text to the green user but it failed to send again. Can Iphone users send texts to android, etc. users?

    Yes, you can send texts to Android, etc.  They will all be green as you say above.  But text messages are at the discretion of your cellular carrier.  You have to have a plan in place with them to send/receive (green) text messages.

  • How to scale text and text frame together by specifying measurements

    Hi all,
    I have a text frame that's 200mm wide (for example) and need to be able to scale it proportionally, along with the text it contains, by specifying the new width in mm (rather than as a percentage). Can anyone tell me if this is possible? I'm using InDesign CC 2014.
    Many thanks
    Jason

    Maybe with a script, but I don't know of a way to do it in one step, the way you can scale with a percentage. If you want to do it in a few steps, this will work:
    Set the position proxy to the left side of the text frame so that when you change the size, it will expand to the right
    Change the size of the text frame to the size you need it to be
    Snap a guide to the right edge of the text frame
    Change the size of the text frame back to what it was before
    Shift-Command drag the right side of the text frame until it snaps to the guide
    That will get you want you want, but it's probably not the way you would prefer to do it.

  • Conditional text and text inserts in FM 10

    A perfect scenario, I thought, for conditional text: user guides for versions A and B of the same product, where most of the content is the same for both and some specific to one or the other. Some of the variants – such as "Connecting the power supply" – are at chapter level, others at paragraph level … so I've set prepared two .book files, and two chapter files which contain a single sentence plus the condition settings: show A, hide B or show B, hide A, respectively.
    Extra finesse, just sprung on me: one chapters, which exists in an A and a B version, uses a text insert for some common paragraphs and one of these paragraphs now needs to be hidden util development is completed.
    Long context, then. Short problems:
    selecting all the files in a .book and using File > Import formats (with only Conditional text settings selected) doesn't seem to be working
    the conditional text in the insert refuses to go away, even with the relevant condition defined, and set to Hide, both in the insert and in the chapter that calls it
    Final question: do I need to brush up on conditions, or is FM 10 not as reliable as it might be here?
    Windows 7.0, one single FM installation of 10.0.2.419

    Niels,
    When you imported the text insert, what did you set for its properties behaviour, i.e. to stay as per the source or to use the properties in the currrent document?
    Are you using "Show as per Condition" or "Show as per Expression" to control the appearance of the conditional text?
    In the insert source document, does the relevant paragraph hide when the condition is applied?
    Is the condition name spelled identically (capitalization and spaces) in the inset and document?

  • SRM Portal - Hover descriptions for the text and buttons

    Hi,
    In the SRM Portal (5.0), the standard hover description for text and text fields is "Area for Input Fields".
    Hover descriptions are those little boxes that appear when you mouse over fields, offering additional info about the fields.
    In the HTML templates, there is no perceivable way to edit these fields. I have tried to edit the tooltip for these fields in the screen painter for these screens (SE51 Layout), but that doesn't work.
    Has anyone been able to accomplish this? Can anyone offer any advice?
    Thanks in advance!

    Thanks.
    The function 'BBPSC_TD_FIELD' gives no parameters for changes to the hover descriptions:
    `function BBPSC_TD_FIELD_DEFINE(FieldName_p,
                                    Label_p,
                                    TD_p = "X",
                                    maxLength_p = "40",
                                    size_p = "40",
                                    ValueExt_p = "",
                                    Mandatory_p = "",
                                    Lines_p = "" );`
    Like you said, I might need to create my own function here. I can't change the standard function, since it's called from almost every template, so creating my own would be best.
    It's hard to understand what to change exactly. From where are the input parameter (FieldName_p, maxLength_p) values pulled/callled? Hmm. How do I name mine and what else ...

Maybe you are looking for