Suggestions with broken audio

i had cracked my screen a week ago, and i put the replacement on it today, after doing so, the when i make phone calls, the sounds coming from phone on max volume is it on 1, any suggestions on how to fix this would be great,

Ok Found the problem and a solution.
All the hardware components are fine.
I found that if I ran a Speedtest of my wireless network near the Auris I was bearly getting a reading of upload speed and my download speed was only 14.69 MPS on a 50MPS pipe. The poor upload speed was causing latency in the stream to the auris.
My Wireless Router supports 2.4/5 GHz so I opened up my 5GHz interface through DD-WRT and set it to broadcast. I then joined my IOS devices to that interface and re-ran the speed test near my Auris. I went from a barely registering upload speed to 12.09 MPS Up and 53.79 MPS Down.
Conclusion.
If your WiFi Router supports 5 GHz then set up your IOS devices to use that interface.

Similar Messages

[SOLVED] Default applications, Econnman, and Broken Audio.

I have recently installed Arch Linux, and I need quite a bit of help.
I need econnman, seeing as how I chose to use enlightenment17, but "sudo pacman -S econnman" doesn't work, as it says it can't find the package.
Also, audio is not working. Need some help with that too.
I would really like some help here, seeing as how it took me an hour just to register (due to the spambot command line not working).
--EDIT--
Now the only problem I have left is broken audio, and I don't know why.
----EDIT----
Fixed everything. The forums provided nearly no use, and the wiki is extremely difficult to navigate.
I do love arch linux though, and once you learn your way around everything (like the wiki), you can do nearly anything.
Last edited by a10wn (2013-09-30 23:31:03)

a10wn wrote:I know econnman is in the AUR, but I have no way of accessing the AUR. The wiki page is of no help to me.
Pray tell, why??
Browse on over to https://aur.archlinux.org/. Click on the packages link. Then, search for econnman.
You should find the package for which you search: https://aur.archlinux.org/packages/econnman/.
Click on it, download the tarball, unpack it, change directory to it, and do a makepkg -- All in accordance with the Wiki.
But, it is not that easy. You will have several dependencies you will need to resolve first.
ewaller$@$odin ~ 1002 %cd econnman
ewaller$@$odin ~/econnman 1003 %pwd
/home/ewaller/econnman
ewaller$@$odin ~/econnman 1004 %ls
PKGBUILD
ewaller$@$odin ~/econnman 1005 %makepkg
==> Making package: econnman 1-1 (Sun Sep 29 20:10:34 PDT 2013)
==> Checking runtime dependencies...
==> Missing dependencies:
-> python2-elementary
-> python2-e_dbus
-> python2-edje
-> python2-ecore
-> connman
==> Checking buildtime dependencies...
==> ERROR: Could not resolve all dependencies.
ewaller$@$odin ~/econnman [1]1006 %
So, I am going to suggest something with which many of my colleagues will not agree. Look in the wiki for AUR helpers. I like packer. Packer is in the AUR.

Can any one help me with CD/Audio disc playback problem on media center m8200n running Windows Vista

I have HP Media Center m8200n Dest top running WINDOWS VISTA HOME PREMIUM 32 BIT edition.It has MEDIA CENTER and MEDIA PLAYER. I experience problems with the computer being able to play CD music discs. What happens is that the Disc will play only for 63 seconds exactly and then stop playing the track, the player will then skip tracks, settle on another one, play it for a few moments and then skip to the end and then play nothing. It gives me an error message that it cannot read the disc. This happens with any and every standard store bought CD new or used. These CDs also do play on my laptop running basically same operating system. This happens whether I trying to Play a disc or burn the disc to the hard drive. The drives work great though as they do play DATA discs all the way through. MP3 discs play fine. It also plays the DVD movies with no problem. Windows media player doesn't make it work, also installed VLC player and REALPLAYER to try some other players and they also don't work for music, only DVDs. They all only produce 63 seconds of music play back from a disc. I've already tried Changing ENHANCEMENTS, UPDATING DRIVERS, UNINSTALLING THE DISC DRIVE and then re-installing back into WINDOWS but none of that helped. SYSTEM came with the integrated REALTEK HIGH DEFINITION AUDIO on the mother boad for multi channel playback options and I've downloaded those updated drivers again but that doesn't do anything. Thinking it might be a hardware drive problem I purchased a new LG BLU-RAY DRIVE/BURNER super multi drive which plays fantastic for any video format from Blu-Ray to regular DVD format with the Power DVD software but the machine is causing even this new drive to have the same problem with the audio and it cuts out playing the audio disc within the same 63 seconds running audio disc. . There seems to be a software glitch and I'm wondering if you can help. Also the sound card seems to work perfectly fine. I downloaded I-Tunes and copied over audio files to the computer via my flash drive and when I play those files from the hard drive, or even the sample windows media files which reside on the hard drive in MY MUSIC, all files play through perfectly, fully, and with great sound. Audio out jacks in back of computer work fine as also does the front head phone jacks upfront. Something in the software when playing a audio disc/file through the dic drives???? I've got hundreds of CD and it's a bummer not beng able to lay them through the system. Does anyone think moving from VISTA PREMIUM to a upgraded version like ULTIMATE or even going up to Windows 7 might solve problem??? What about the 32 bit verses 64 bit editions??? My system should be able to run in the 64 bit frame work also. THANK YOU in advance!!!

Hi,
All dimms work individually? Did you run a bootable memory diagnostic to determine the reliability? Did you run a diagnostic on the hard drive? I believe that your PC came with PC Doctor and that you can create a bootable diagnostic disk. Did you create that disk? Be sure to purchase memory dimms from a manufacturer that will stand behind their product with a guarantee such as Crucial, Corsair or Kingston. Buy directly from the manufacturer and they will stand behind the guarantee. Be sure that all of the dimms are identical. Use CPU-Z to determine that the specifications are indeed identical.
You have some options to consider once you can stablize your PC for updating the BIOS.
Locate a hard drive and use the HP external recovery media to build a VISTA system. -- safest method
Use a VISTA repair disk and at the command prompt try executing the HP BIOS update (Admin). -- safe
Try a bootable BIOS update process as suggested at this site. -- less safe but doable
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

How do I import AVI video with stereo audio (and keep it that way)?

Today I just discovered that all the AVI video with stereo audio I've ever imported into a Premiere Pro CS6 project has been mysteriously converted to mono. And I can't find any import setting anywhere that enable me to change this.
Here's the deal...
I've have an AVI file with stereo audio (the file is actually a stereo sound test that I downloaded to prove that I wasn't imagining things). On my hard drive, I right-click and view the properties:
Video
Length: 00:00:36
Frame width: 320
Frame height: 240
Frame rate: 25 frames/second
Audio
Bit rate: 128kbps
Channels: 2 (stereo)
Audio sample rate: 44 kHz
I click on it to play and listen with headphones--everything is playing in the correct part of the stereo spectrum. Then, I import it to Premiere, click the file name in the left content menu, and check the properties, suddenly they read:
Type: AVI Movie
File Size: 1.1 MB
Image Size: 320 x 240
Frame Rate: 25.00
Source Audio Format: 11025 Hz - 16 bit - Mono
Project Audio Format: 11025 Hz - 32 bit floating point - Mono
Total Duration: 00:00:36:15
Pixel Aspect Ratio: 1.0
Sure enough, I drag it into the sequence, listen to it, and it's indeed playing mono. Outside of Premiere, the original source file still reads and plays correctly with stereo sound.
When I import stereo WAVs and MP3s, it keeps the original stereo channels without me having to do anything special. I even just imported the same exact file as a MOV with stereo audio, and it showed up in Premiere as:
Source Audio Format: 44100 Hz - 16 bit - Stereo
Project Audio Format: 44100 Hz - 32 bit floating point - Stereo
What is going on here with AVIs? Am I doing something wrong? Are there settings I'm missing somewhere?
(And before anyone suggests I only use MOV in the future... that's not exactly the answer I'm looking for.)

Thank you for that info.
For video, the codec is MPEG-4 Video (XVID) and for audio it says MPEG Audio Layer 1/2/3 (mpga).
There are two issues with that file:
The first is the Xvid CODEC (not meant for editing), and then the MPEG Audio/MPGA. I would convert that file, to something that is more editable.
Good luck,
Hunt

Itunes 7.1 does not run. Issue with your audio config detection

Hi,
Since I updated to itunes 7.1 the following error message comes up each time I start the program "Itunes cannot run because it has detected a problem with your audio configuration" This happened for the first time right after the update and I have tried to downgrade to the previous version (which was working fine) but now this error occurs with previous version too.
My sound card is a creative sound blaster x-fi and I don't see anything wrong with its configuration.
The OS is Vista premium
Thanks to anyone who can help me with this.
DELL Dimension E520 Other OS Vista and creative sb x-fi

the following error message comes up each time I start the program "Itunes cannot run because it has detected a problem with your audio configuration"
typically that's caused by a broken QuickTime. (iTunes uses QuickTime for audio and video playback.) see the following document for troubleshooting instructions:
iTunes 7 for Windows: iTunes had detected an audio configuration problem

What's wrong with my audio configuration?

When I try to open iTunes, I get a message window that says, "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." After pressing "Okay," iTunes will open but will not play any sound. I tried re-downloading Quicktime like suggested in other posts, but this did not help. Now I'm at a lost. Any suggestions?

I tried un-installing Quicktime and iTunes and then re-installing both and now everything works fine for me. Have you tried that? Even all of my songs are still in my playlist! *so happy*
Good luck!

I have a MacBookPro5,5 how do i connect it to my hdtv WITH BOTH AUDIO AND VIDEO? and where can i buy this cable(s)?

i have a MacBookPro5,5 how do i connect it to my hdtv WITH BOTH AUDIO AND VIDEO? and where can i buy this cable(s)?

thank you roger. i have attempted to connect my mbp now 3 times (all different ways with different cables purchased) but unfortunately no success. i understand that with me having an older mbp it can be a challenge. i have found this page http://www.wikihow.com/Connect-a-Macbook-to-a-TV but with my unsuccessful history, i have become skeptical. i will try your suggestion and let you know. thank you again.

Internal computer noise with firewire audio devices

Hello
I have a Power Mac G5 PPC 2.3 and Mac Os X 10.5.6, with tiger I have the same problem too, I bougnt my Mac for audio work, and from the purchase day, I have the same problem, I bought my first audio sound card, M-Audio Firewire 1814, and I installed the last drivers for my operating system, when I start Logic I must go to prefferences audio and select the device, I select coreaudio tab and M-Audio Firewire 1814, and when I click on apply changes, in the Mac start an internal noise, low level, and hign frecuency, and this sound keep while logic is open or another audio aplication with M-Audio 1814 is selected like audio device like Pro Tools M-Powered.
Aplications work fine but this noise I think is a conflict with audio device drivers, I can hear this sound too when I go Aplications/Utilities/Audio Midi Setup/ and in the audio devices tab the internal noise not is sounding but when I click on Midi devices tab, the internal noise start and is sounding while Audio Midi Setup is Open, if I quit Audio Midi Setup the noise stop.
In the Activity monitor I can read MIDI Server process is launched when I click on MIDI Tab, and if I select and close this process the noise stop.
It is only for the noise when is sounding with audio midi setup, close MIDI Server and noise stop, but when the noise is with any application (Logic or Pro Tools) in the activity monitor quit MIDI Server process but the noise keep sounding.
I have Digi 003 Rack and Pro Tools LE too, and I have the same problem when Pro Tools LE start.
If I select M-Audio 1814 in system prefferences/Audio, like audio device and open ITunes the noise is not sounding with ITunes, I can listen music whithout problems, but If I select Digi 003 Rack like Audio Device in
System Prefferences/Audio The noise is sounding with ITunes start becouse Digi Core Audio Driver is launched.
I think is a conflict between Thirty Parts Drivers and The System but I need help, what can I do to resolve this.
Thanks

Nope, someone elsewhere suggested a thing called "ground loop" occurring. Meaning, the interference from the electric current. They suggested trying it with battery power (power detached), and without. But at least for me, made no difference unfortunately.

Encore is putting my files out of sink with the audio.

Hi, I have a completed sequence video file in PPro 5.5. I make sure all the clips are "linked" to the audio source (the source is from recorded audio from a sound board) I only use the on camera audio for sinking with the good audeo. When all is done I also select the entire sequence and group it. I make sure everything is sinked perfectly and also have another person check it as well. When I send this to Encore to make a DVD it usually puts it out of sink by a split second but its noticeable. Does anyone know what is going on? I didn't have this issue with CS4.
Thanks Kate

Kate,
As far as the Audio, in a lead in (and similar can apply to a lead out), many high-end DVD players take a moment to "lock" onto the Audio signal. This is a common problem with DD AC3 Audio, whether 5.1, or stereo. It is suggested that one allow ~ 02 sec. of silence at the beginning. In my Sequences, I always begin with 02 sec. of Black Video, and Dip-to-Black to fade up from black to my Video. I begin my Audio at that 02 sec. point. When that Audio Stream is Exported, I get 02 sec. of silence. Neil Wilkes, one of the MOD's here, refers to that as Black Audio. This keeps any gaps from the Audio Track in Encore, and gives DVD/BD players time to lock onto the Audio.
As there can be slight differences in the Duration of Exported Video and Audio (block size differences), I repeat that process at the end of each PrPro Sequence, by adding 02 sec. of Black Video and the Dip-to-Black Transition. My Audio always ends at the beginning of that Black Video, so I get 02 sec. of silence. The problem with an Audio Track, that is slightly longer, than the Video, is that the DVD-spec. was written primarily with Video in mind. With a longer (and I am talking just a handful of Audio Units here) Audio Track, then there is a gap in the Video - it ends short. That can cause problems in Transcoding, and often yields a "Failure to Return Frame" error.
Those little snippets of Black Video also make things easier, when the DVD player's heads have to reposition, which can cause a "black flash," and in my case, any black flash happens during black, so it is never seen.
Good luck,
Hunt

Problem with Skipping Audio in CS5.5

Hi, I recently opened a file in CS5.5 that I created in 5.03. I have a problem with one audio file. It is a music file mp4a that skips as it plays. All the other files are fine. I deleted the file and replaced it, but that file skips. When i play it in itunes or Windows player, it plays fine. Any suggestions. Thanks Roman

Thank you for the replies. What was happening is that the other audio files were being onverted by PPPro. This one was not. I moved the file to the desktop and once again placed it into the project. This time the yellow conversion line on the bottom right corner went to work and it works fine. It was some type of glitch with that one file. Thanks again. Roman

Edge Animate, Working with multiple audio tracks

I'm having trouble with one of my animations.
I have set up 8 animated symbols that will play when the user hovers over the symbol.
When the user clicks on a symbol it will play an audio mp3 files.
// insert code for mouse click here
// Sets a toggle to play or pause the audio track
var audio = sym.$("_1")[0]; "_1" is the name of the audio file that is placed on the timeline. The original MP3 file is named 1 but when it was dragged to the canvas it created a layer called "_1".
if (audio.paused) {
audio.play();
} else {
audio.pause();
But there are two problems, one more concerning than the other.
The problems are below:
I can not figure out the code to stop the audio when the symbol is clicked again instead of it being paused. I tried to change audio.pause to audio.stop. That did not help. I would like the audio to stop if clicked again and then play from the beginning if clicked one more time.
This is the one that I am most concerned about. If the user clicks on one symbol, the audio for that symbol will start to play as intended. But if the user clicks on a second symbol, the audio for that symbol will start to play in conjunction with the audio already playing from the previous symbol. It would be nice if a user could click on one symbol it will start to play its audio but if they change their mind and click on another symbol, the playing audio will stop and the new clicked symbol will start to play its audio.
Anyone have any suggestions? Or help to provide. Thanks in advance.

Hi there,
One quick answer to your question, and another that I will follow up on when I get a few minutes.
Animate uses the HTML5 audio API to control audio elements, so you can only use methods and properties that are specified for audio elements in HTML5 browsers.
To "stop" audio, you need to pause it and then set its currentTime property to 0, like so:
sym.$("your_audio_element")[0].pause();
sym.$("your_audio_element")[0].currentTime = 0;
The next time you play this audio element, it will play back from the beginning.
The other part of your question (stopping other playing audio when another symbol audio starts playing) can be done by getting all instances of the audio tag in jQuery and then pausing all audio. I don't have the exact syntax for that at hand as I reply, but I'll respond back with it soon.
hth,
Joe

Help importing WMV files with 4 audio tracks....

Hello,
I am using a PC to run a robot show. The show runs off of WMV files recorded with 4 audio tracks.
The "front" audio tracks are the left and right chanels for sound.
The "rear" audio tracks are the signals the show runs off of.
(If you want to see the show... it's here http://www.yorkmiss.com/Curtains.wmv
I run the audio files using the windows media player and as you can see... it works fine.
However, I would like to use the I-tunes player since I can then controld the show remotely using my I-Touch.
The problem is that every time I import one of the audio file into I-tunes, it converts it to a new type of file that "blends" the front and rear chanels of audio together.
I've tried every different option in the import prefrences list - and they all have the same result.
Does anyone know a way of playing the files "as-is" without converting them, or is there a way of converting them I do not know about?
Here's an example of one of the files:
http://www.yorkmiss.com/ShowbizKylesmom_504.wma
Any help or suggestions would be welcome and appreciated!
Thanks in advance,
Beth

Yes, I understand that now... but is there a way to convert to those file types while still preserving the 4 seperate audio chanels?
Thanks, Beth

Synching video with external audio source

We shot an interview, and somehow no audio was recorded...no worries, we had a little digital recorder going as a backup....
I synched the video with the audio, and all is good for about 10 seconds, but then, sure enough, the audio begins to go out of synch,...
I suspect this has to do with the whole 29.97 vs 30 fps issue, i did play around a bit, but couldn't figure it out...
any suggestions?
the video is regular DV...
audio is 32hrz WAV (converted to 48 hrtz AIFF, no help)
anyone?

This is a problem that comes up regularly around here so try searching.
The clips must be different lengths, yes?
The audio clip may be the same length but it must be clipped off.
The way I have dealt with this on a friend's system (using a Canon XL1 as the DV input) was to simply open the Speed window of the of the audio clip and enter a new time so it precisely matched the time of the video clip.
Say the event is exactly 60 seconds long from first frame to last frame. The audio drifts out of sync so it is slightly longer, say, 61 seconds. You control-click on the audio clip in the timeline and enter a new length. It may need to render.
sorry not to have the absolute answer. Double-system sound just doesn't come up very often in my life. Luck, let us know.
bogiesan

ITunes has detected a problem with your audio configuration.Audio/video playback may not operate properly. Help please.

I haven't used itunes here much just been playing the songs I had on it. Now i downloaded some more songs i plugged in my Ipod touch and it's not showing up and giving me the message above (Itunes has detected a problem with you audio configuration. Audio/video playback may not operate properly. I uninstalled Itunes and quicktime restarted computer and still the same thing. What is going on?

Try reinstalling QuickTime, as this article suggests
http://docs.info.apple.com/article.html?artnum=304424
Other people have had luck with deleting their QT rpeferences file:
C:\Documents and Settings\username\Local Settings\Application Data\Apple Computer\QuickTime\QuickTime.qtp

Problem with iTunes: iTunes has detected a problem with your audio...

"iTunes has detected a problem with your audio configuration. Audio/Video playback may not work properly."
Ever since I downloaded the latest version of iTunes I recieve this message every time I open iTunes and I can't play anything. I tried reinstalling but the same problem occurs. Any solutions? Thanks

I have also received the same message. I tried removing itunes and quicktime. I even went as far as searching "my computer" for files and folders with these names to delete everything. No luck. Someone suggested downloading quicktime as a stand alone download. This I did, but then when I wanted to download itunes it came bundled with quicktime and overwrote the files. Is it even possible to download itunes without downloading quicktime along with it? Is an older version of itunes better? I had no problems prior to this version. Does my system need to be upgraded to be compatible? I'd rather just have the old version back. It worked! Is there a way to obtain an older version?
Presario R3000 Windows XP Pro

Suggestions with broken audio

Similar Messages

Maybe you are looking for