SUID Permission Issues not Listed on Apple's Site

Hey, I have more SUID warnings than listen on apple's site...
http://docs.info.apple.com/article.html?artnum=306925
It is saying they are modified and will not be repaired. Some of the ones I have are listed, most are not. Is this a concern? I read on another mac forum that "all SUID warnings are not created equal" meaning some you should be concerned about, some not.
http://i39.photobucket.com/albums/e159/sockerdood/Picture1.png is a screenshot of the readout.

The SUID warnings in Leopard have so far meant that the installdb was not properly updated. You need to check whether this is the issue. I'll show you how with the load_webdav as an example. Open the Terminal application and check the installdb with this command:
pkgutil --file-info /System/Library/Extensions/webdavfs.kext/Contents/Resources/loadwebdav
Look for the mode. It should read: mode: 104755. If the mode is correct then the sha1 digest was not properly recorded in the installdb. Check the sha1 digest for the current file installed with this command:
/usr/bin/openssl sha1 /System/Library/Extensions/webdavfs.kext/Contents/Resources/loadwebdav
Is it different? You'll see the sha1 digest recorded in the installdb from the pkgutil commmand.
If so then let's look at the bill of material files and see if the checksum is correct. First you use this command to consult the bom files. The last column in the output is the checksum:
for i in $(ls -1 /Library/Receipts/boms/); do echo $i;lsbom /Library/Receipts/boms/"$i" | grep load_webdav; done
Now check the checksum for the current installed file with the command:
cksum /System/Library/Extensions/webdavfs.kext/Contents/Resources/loadwebdav
Is the checksum the same. If so then it is safe to assume that the installdb was not properly updated. I would also check every other file that produced a warning message.

Similar Messages

  • I can't log in the App store because an from Zambia which is not listed in Apple outlets. How do i go around this as apple products are using globally and not only in the listed countries. My product is a Mac book pro.

    I can't log in the App store because am from Zambia which is not listed in Apple outlets. How do i go around this as apple products are used globally and not only in the listed countries. My product is a Mac book pro. i feel this limits how i can use my product

    Unfortunately you have taken an Apple product outside of the area where Apple currently does business. There isn't legally a way around this. Apple cannot license apps to you where you currently live.

  • HT5071 my country is not listed on Apple

    Can i sell a book on ibookstore, if my country is not listed on Apple?

    Yes, you can. Where you are doesn't matter. You can publish to any of the 32 stores currently available.
    Michi.

  • Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013

    Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013 
    Newform.aspx of list:-
    Custom List is not saving data sometimes in the new form after 15 minutes and only blank entry record got created without saving data, even though some columns are mandatory fields?

    Hello dcakumar,
    Sounds like a strang issue. If you can reproduce this can you see some errors in the ULS logs?
    - Dennis | Netherlands | Blog |
    Twitter

  • All movies not listed on Apple TV!

    All of my movies are not listed on my Apple TV. Does anyone know why. I am running mavericks on 27 iMac and it is a second gen Apple TV. I am missing approx 6 movies. I see them in iTunes but when is roll through on the Apple TV they are not there. Thanks in advance. 

    I found the rest of them in home videos. Now how do I move them to movies?

  • Safari 5.0.1 not recognised by Apple Safari site

    Safari 5.0.1 is not recognised by Apple's Safari site for Extensions i.e.:
    http://extensions.apple.com/
    just to be sure, I even upgraded safari once more although I was sure I had the last version!
    I have not a problem as such, although Safari seems to drain memory since upgrading to this version. But I guess this won't encourage some user to try Safari Extensions.

    scfc1905 -- Welcome to Apple Discussions!
    We're other Mac users here, asking questions and sharing solutions.
    +Safari 5.0.1 introduces extensions:+
    +a great way for you to add new features to Safari.+
    Safari 5.0.1. is the updated Application. it is not an extension.
    So, when you go up to the main Safari menu, and click on "About Safari"
    which version does it say you are using?

  • "Memory Overview" not listed in Apple System Profiler

    I have a beige G3 minitower running OS 10.2.6 that currently has 192 MB RAM. I am set to get more RAM for this machine, but I noticed that my Apple System Profiler doesn't even have a Memory Overview category showing what RAM is presently in which slot. (I'm used to seeing that in OS 9.2) In other words, I see the software, hardware, network, and production information overviews in the System Profile tab but not the Memory overview. (I get the 192 MB when I choose About This Mac from the Apple menu.) Did Apple discontinue the Memory Overview feature with Jaguar? Or is there some Preference or View I need to set? (The Preferences command is greyed out on the Apple System Profiler menu)It just seems strange to me that I can't get specific info on the currently installed RAM
    beige g3 minitower   Mac OS X (10.2.x)  

    Patroklus,
    That is what is showing on the right hand side of the page, correct?
    What I listed, is what is in the left column of System Profiler, when all of the Disclosure Triangles are clicked, and pointing down.
    I then click on Memory, to highlight it, and on the right side of the Profiler,
    my Memory Slots are displayed.
    Top Half Of Window
    DIMMO/J13 With Size Type Speed displayed
    DIMMO/J14
    Bottom Half Of Window
    DIMM0/J13:
    Size: 256 MB
    Type: SDRAM
    Speed: PC133-333
    ali b

  • Palestine territory why its not listed at apple countries

    i have an Palestinian  visa and i can't use it to buy app on ( APP STORE or ITUNES ) , even it's work fine on other websites ,
    is there any way to fix this issue .
    thank you  

    My guess is that you mean a "VISA Credit Card" issued by a financial institution located in the Occupied Territory of the West Bank or Gaza - both within the International borders of Israel (this is likely the borders recognized for convenience sake by Apple iTunes Stores for "Location" of the billing address and physical location of you)
    If you want to get a final say so on the subject > Store Group - Contact Us - Apple Support
    If indeed it is Israel as the "location" Apple wants, the link ed2345 provided says you can get these things in Israel

  • Configure restrictions not listed in Apple Configurator?

    I work in a school to deploy iPads to be used by 11-16 year olds. Apple configurator seemed like the tool to use, and indeed has proven invaluable in setting up the iPads and deploying applications.
    The Apple Configurator has a section where you can define restrictions, which is useful to stop improper use.
    However not all restrictions available in iOS are configurable here. Users can even completely reset the iPad.
    Is there a method to mass configure these restrictions, or am I out of luck?

    What are you restricting right now?

  • HT4352 Automatically missing airplay icon and iTunes library not listed on Apple TV computer screen

    Home sharing and network connections are ON - ATV, iTunes & iPad mini. Neither device shows in iTunes nor Libraries in computer main screen on ATV. Nothing is automatically showing up as the instructions say... Neither is AirPlay icons... What's wrong?

    You need Mountain Lion and a compatible modern Mac for Airplay mirroring.  Does your system satisfy Apple's requirements?
    http://www.apple.com/uk/osx/specs/
    (See feature specific requirements listing Airplay capable Macs).

  • Win 10 Satellite S855 issues - not listed in supported models

    I tried upgrading to Win 10 and found that my LAN and WLAN was not recognized and not able to connect so I reverted back to Win 8.1 where everything works.Adapter Realtek RTL8723AE After some research I found no support info for my model Satellite S855 on http://win10upgrade.toshiba.com/swupdate/modellist.aspx?region=TAIS&lang=en&country=US  Am I to understand I'm stuck with Win 8.1 since my model is not on the list? Purchased in 2013 so it's not quite an ancient machine,Any helpful info on the problem would be appreciated.

    There is nothing stopping you from going to Win 10 and, with your late model, you probably will have few  problems although LAN and WiFi problems are pretty common.  If you try again, check with your LAN and WiFi manufacturer's sites for help. Also, you could try re-installing the Win 8.1 drivers since Win 10 may have used  generic drivers during its installation. What Toshiba is saying is that there are no Toshiba drivers or utilities written for Win 10 at the present time.
    I have been a Win 10 tester for 10 months using an older model purchased in December of 2013 with Win 7 and I have no Toshiba support either.  I am using that machine now and have it running just fine and, incidentally, I've grown to l;like Win 10 although that wasn't true the first few months.

  • My country is not listed for apple ID, and I have problems to download free apps from itunes?

    every time I try to dowload something, im asked for country, I even tryed to set that im from US, canada, Hrvatska... but it ask me for visa, and then i try to find "none" option, but there is eny. please help! From Serbia with Love

    If you have an existing ID, & you don't want to use a credit card, you'll have to redeem an iTunes gift card. If you don't want to do that, you'll have to create a new ID by following the directions here, EXACTLY:
    http://support.apple.com/kb/ht2534

  • Is there any way to subscribe to Creative Cloud from countries that are NOT listed on the Purchase site (Bosnia and Herzegovina)

    I'm from Bosnia and Herzegovina and just recently started a IT StartUp Company with a great success. Now we have the requirements for tools like Adobe Illustrator, InDesign and Photoshop, but still as a StartUp, to buy the full licence is out of question for now.payment.
    The solution would be te CC version with the monthly, but as many other countries, our country is not supported through the Adobe Purchase Page.
    Is there a alternative way to do that.

    Hi there
    Creative Cloud for Teams is available through resellers in your country.
    Thanks
    Bev

  • HT5699 I forgot answers to my security questions and it doesn't show "reset security questions" and my country is not listed in "contact Apple support" what do I do?

    I Forgot answers to my security questions and there is no "reset security questions" in "manage my Apple ID" and my country is not listed in "apple support" what do I do???

    Try contacting Support via this form and explain and see what they reply with (tell them that you don't have a rescue email address on your account and your country isn't on the HT5699 page) : https://ssl.apple.com/emea/support/itunes/contact.html
    When they've been reset you can then add a rescue email address for potential future use : Manage your Apple ID primary, rescue, alternate, and notification email addresses

  • Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved.  It started with the last upgrade to 10.8

    Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved.  It started with the last upgrade to 10.8

    Back up all data.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
    Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2 (optional)
    The first step should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary.
    Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    resetpassword
    That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’re not  going to reset a password.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

Maybe you are looking for

  • Print Report in PDF format

    I have a report region based on sql query. I want to print that report region in PDF or word format. How can I do that. It may further be stated that I dnt have print server configured. Is it possible to do this wihout the configuration of report ser

  • How to use parameter file with java

    Is it possible to use a parameter file with Java, and is there any class/method to make it easy to call and use these parameter from a text file, other than scanning the whole text file manually as we can do normally with visual basic/c++, so we can

  • Can i filter my calendar?

    Is it possible to filter my calendar by anything other than the calendar list on the left? For example, I'm using this calendar to schedule and keep track of classes at different schools. So, I have a calendar for each school so that I can look at th

  • Seeburger Adapter Scenario

    Hi Frnds, I want See  Burger ,CIDX Adapter end to end scenario with screen shots, If anybody know link or having end to end scenario pls share to me its too urgent. Regards, Raj

  • Pdf in the print command

    I have Printmaster software for creating flyers.  I used to be able to save a document in pdf format in the Print command of the software.  But now when I open the Print command there is no option to save it as a pdf.  How can I get this pdf option b