SUM and upgrade to EHP Updates to Suite 2013 SP06

Dear Gurus
According to OSS note 2081050 - Upgrades and EHP Updates to Suite 2013 SP06, an upgrade to Suite7i2013 SP06 requires the new Support Release 2 DVDs to be used (will be available soon).
Why Stack upgrade requires DVD? As i know in case of stack upgrade, shadow instance is built as a copy ( dbclone) of existing repository. Upgrade export DVD are in use in case of release update only.
Can somebody explain what happens?
Regards
Vladimir Kogan

Hi Boris,
I have a similar issue with SRM upgrade from SRM 5.0/NW7.0 to SRM 7.0 EHP3 SP06/NW7.40.
I have generated a stack file via MOpz and the stack file contains DVD:
<dvd caption="BS7I2013_SR1_UPGRADE: EHP3 FOR SAP SRM 7.0 - Stack 03" id="f80b9f40-3741-11e3-b198-005056a204ff" type="upgrade">
With the availability of Support Release 2, the DVDs of the predecessor Support Release 1 have been archived. I cannot find DVD for BS7I2013_SR1_UPGRADE
Why SUM requests the DVD and why requests BS7I2013_SR1_UPGRADE?
Should be requested BS7I2013_SR2_UPGRADE, or not?
2081050 - Upgrades and EHP Updates to Suite 2013 SP06 --> Upgrade was released at 05.12.2014
I have attached stack.xml and stack.txt
Could you please check and help?
Thank you
Rupert Kovacs

Similar Messages

How to install LR5 via the Cloud? LR4 says no updates available. [was: Help with purchases and upgrades.]

I am a CC member.
1- I can not find the chat support.
2- I need LR5 but my app says no updates, even though I am only on 4.
3- This site sends me in circles and my app is no help whatsoever. I have now updated to OS X Yosemite v10.10, and need LR5. I purchased CC for this reason, but I still don't see how to upgrade. After hours of installs and upgrades, I'm getting frustrated. Thanks for the help, its much appreciated.

AprilThisWay it is likely your Lightroom issue is related to having the incorrect Adobe Application Manager/Creative Cloud Desktop application installed. The current release version is 1.8.0.447. You can find additional details at Creative Cloud Help | Creative Cloud app for desktop | Release Notes.
I would recommend utilizing the uninstall instructions available in the link referenced in message #7. Once you have run all the available uninstallers available in the Applications/Utilities/Adobe Installers folder then please use the CC Cleaner Tool. You can find details, and a download link, for the CC Cleaner tool at Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.
If you continue to experience difficulties can you please post what changes were made to your computer in addition to upgrading to Mac OS 10.10.

I can't send emails from Mail. I have three different accounts set up and have the same problem with all. The mail just sits in my outbox. All worked fine until Yosemite upgrade. Recent update has not fixed problem.

I can't send emails from Mail. I have three different accounts set up and have the same problem with all. The mail just sits in my outbox. All worked fine until Yosemite upgrade. Recent update has not fixed problem.

I have been experiencing the same problem. My mail app won't even open on my Late 2011 Macbook Pro. It will show as open, but the app will never actually show up.

I upgraded to ios 7.1 and even after i updated to this version in the calendar view i could get a list of all of appointments and now i have half screen of calendar and then appointments is their any way to go full screen of appointmetns

I upgraded to ios 7.1 and even after i updated to this new version in the calendar view i could get a list of all appointments and now i have done something and i get a half scrren of calendar and half screen of appointments. is their anyway to get full screen of appointments with the 7.1 version

Tap on any give date in the monthly view and you will be taken a list of event, the default position being the date you tapped.
The icon just to the left of the search icon provides a master list view of events.
http://help.apple.com/iphone/7/#/iph3d110f84

Iphone 4 went into recovery mode when trying to restore, only option available now is to "restore and update" however this will not work, how can you restore from a backup once in recovery mode and only option is "restore and upgrade"? Please help!

iPhone 4 went into recovery mode when trying to restore it. Now the only option iTunes allows is for "restore & upgrade", it is not offer an option to restore from a backup, says that must first do the upgrade, when attempting to do the upgrade the iPhone won't accept it.
How can I restore from a back up in recovery mode when the only option is "restore and upgrade"?
Please help.

You don't you must restore your phone first and then you will have the option to restore from your backup.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

After iTunes upgrade, calendar and bookmarks no longer update during sync

After completing the most recent iTunes upgrade, my phone will complete a backup and seems to go through the sync process. However, the calendar items and bookmarks will not update with any changes that were applied in Outlook or Internet Explorer. Also, previously, I would receive a "syncing calendar" message (or something similar) during the process, and that no longer occurs.

same problem here after itunes 9.1 update. seems to be a common problem:
http://discussions.apple.com/thread.jspa?threadID=2383877&tstart=0
http://discussions.apple.com/thread.jspa?threadID=2383298&tstart=0
probably more posts...
--Peter

My iPod touch won't connect to wifi. Password is correct. Already reset network settings and restored ipod to original settings. Already updated iTunes and upgraded iPod to iOS 6.

A message keeps popping up when I try to join my network that says, "unable to join the network."
I have already reset network settings and restored ipod to original settings.
I already updated iTunes and upgraded iPod to iOS 6.
The password is correct. I even made sure by checking my wifi account.
I have completely restarted my internet connection multiple times.
I have also restarted my ipod multiple times
My wifi was working on my iPod yesterday before I reset all settings.
I updated it yesterday to iOS 5. Still didn't work.
It wasn't updated to the new iOS 6 until today so I don't think it has anything to do with the upgrade.
My camera started to be glitchy, so I reset my Ipod like I was advised in another discussion.
My internet wasn't connected anymore. My password wasn't working either, but the wifi connection was still showing.
Safari still wasn't working, though.
I did the sensible thing and I reset my network connection.
Now, the password isn't working and there's no wifi signal.
The camera is working well now, but the wifi is messed up. I didn't expect any of this to happen. The internet is all I use the iPod for. Now, the iPod is useless to me. Please help?

are other things still connecting to the wifi without a problem?
Have you tried resetting network settings, then unplugging modem and router from power for 40 seconds then plugging back in letting the lights stabilize and Then recconecting with the ipod>?

Hard Drive warning when upgrading to Mountain Lion. 2 try and I was able to upgrade. Software update for IPhoto, had problems restarting. Do I need my hard drive checked

Hard Drive warning when upgrading to Mountain Lion. 2nd try and I was able to upgrade. Software update for IPhoto, had problems restarting. Do I need my hard drive checked

Yes.
Choose Apple menu > Restart. Hold down the Command (⌘) and R keys as your computer restarts.
When you see a white screen with an Apple logo in the middle, you can release the keys.
Click Disk Utility, and then click Continue.
In the list at the left, select the item you want to repair. (Be sure to select an item that’s indented to the right in the list, not an item at the far left.)
Click First Aid.
If Disk Utility tells you the disk is about to fail, back it up and replace it. You can’t repair it.
Click Repair Disk.
If Disk Utility reports that the disk appears to be OK or has been repaired, you’re done.
Otherwise, you may need to do one of the following steps.
If Disk Utility can’t repair your disk or it reports “The underlying task reported failure,” try to repair the disk or partition again. If that doesn’t work, back up as much of your data as possible, reformat the disk, reinstall Mac OS X, and then restore your backed-up data.
If you continue to have problems with your disk, it may be physically damaged and need to be replaced

After hard drive crash, Pages app brought over, and upgrade to snow leopard installed, Pages would not launch. Re-downloaded the 3.0.3 update and Pages launched, but will not open any documents or start new document.

After a hard-drive crash, Pages application was brought over from the old hard drive, and upgraded to snow leopard. However, Pages would not launch. I do not have the disks and the computer was given to me by my son with iWork 08 installed, so I do not have the ability to re-install using Purchases. I re-installed the update 3.0.3, which I already had, but thought it worth a try. That enabled Pages to launch, but it will not open a new or old document. I can see in preview the document, but it will not open. Any suggestions besides repurchasing Pages. I've just put out a lot of money for a new hard drive and retrieval of apps and docs from the old hard drive and would like not to have to put more money in it.
Thanks for any suggestions.

You can not simply drag over Pages, particularly if it was perhaps damaged in a crash.
As it was only Pages '08 it may be time to upgrade to Pages '09 from the App Store. It is not that expensive and will allow you to install it on any Mac sharing the same Apple I.D. and protect you from a repeat of this problem.
There are free alternatives to Pages if you are hard strapped, it depends on what you are using Pages for, it is not the only option by far.
Peter

HT202008 I am having issues with my Window 7 on boot camp. My hardware is Macbook Pro Mid 2010 model and working on OS X 10.9.5. Recently I went to windows 7 to do a system upgrade but failed and was told to update the bootcamp drivers.

I am having issues with my Window 7 on boot camp. My hardware is Macbook Pro Mid 2010 model and working on OS X 10.9.5. Recently I went to windows 7 to do a system upgrade but failed and was told to update the bootcamp drivers. I installed boot camp5 but seem to be the wrong version and change to boot camp 4 which was updated okay. However I still cannot do the updates. Can someone advice me please? Thank you!

Please see Boot Camp: System requirements for Microsoft Windows operating systems - Apple Support for the appropriate version of drivers related to the specific version of Windows 7.
MacBook Pro
(13-inch, Mid 2010)
4
4
DVD
DVD
DVD
MacBook Pro
(15-inch, Mid 2010)
5
5
4
DVD
DVD
DVD
MacBook Pro
(17-inch, Mid 2010)
5
5
4
DVD
DVD
DVD
Be careful with Windows Updates, especially driver updates. Standard WHQL drivers can cause problems.

I just installed Creative Suite v 6.0 Master Collection and downloaded all product updates - I tried

I just installed Creative Suite v 6.0 Master Collection and downloaded all product updates - I tried opening a document created with InDesign v9.x Cloud version and I get an error that do not have the latest... what is going on here?

CS6 Master Collection is the last perpetual licensed product. The files created with CC version of Adobe apps are not, in many cases, compatible with CS6 versions.
Is there some reason you thought they were?

All of sudden, I can't launch iTunes as I get a popup saying "iTunes requires Quicktime 7.5.5 or later". I only have 7.4 currently and the apple site doesn't show anywhere to download Quicktime upgrade. Software Update detects no reqd updates. Help pls??

all of sudden, I can't launch iTunes as I get a popup saying "iTunes requires Quicktime 7.5.5 or later". I only have 7.4 currently and the apple site doesn't show anywhere to download Quicktime upgrade. Software Update detects no reqd updates. Help pls??

Here's a link to the QuickTime for Leopard 7.7 installer:
http://support.apple.com/kb/DL761

HT201364 I upgraded my MacBook Pro with Lion (but with iphoto 9.2.1) to Maverick and now I can't open iphoto and I can't update either

I upgraded my MacBook Pro with Lion (but with iphoto 9.2.1) to Maverick and now I can't open iphoto and I can't update either - can anyone help please?

Download the iPhoto upgrade from the App Store. It should be free.
iWork and iLife for Mac come free with every new Mac purchase. Existing users running Mavericks can update their apps for free from the Mac App Store℠. iWork and iLife for iOS are available for free from the App Store℠ for any new device running iOS 7, and are also available as free updates for existing users. GarageBand for Mac and iOS are free for all OS X Mavericks and iOS 7 users. Additional GarageBand instruments and sounds are available for a one-time in-app purchase of $4.99 for each platform.

Since migrating from Windows 7 to Windows 8 and upgrading to iTunes 11, the latter has frozen while syncing my devices, usually while at the "determining apps to sync" stage of the process. If I am attempting to download app updates before attempting to

Since migrating from Windows 7 to Windows 8 and upgrading to iTunes 11, the latter has frozen while syncing my devices, usually while at the “determining apps to sync” stage of the process. If I am attempting to download app updates before attempting to sync, the problem normally occurs at the first “installing app x” stage. In addition, the whole iTunes experience is extremely sluggish and will even freeze while searching for a track. Everything worked fine on Windows 7. So far, I have repaired the program several times and have checked for compatibility issues, but there is no Windows 8 option in the combo box, obtained after right-clicking the icon and selecting Properties/Compatibility. As a result, I am unable to sync my devices. If I uninstall iTunes before re-installing, will this affect my iTunes libraries? Does anyone have any suggestions?

After going by elimination to isolate if the problem was from (1) iTunes app, (2) my computer or (3) my old iPhone 4G, I figured out what my problem was.
1) First I deleted & reinstalled iTunes on my Windows PC without succes, my playlist did not changed on my iPhone.
2) I tested a successful #sync from the iMac at work.
So my conclusion is: The hard drive on my Windows PC is full and that is affecting iTunes SYNC functionalities.
So I'll do a back-up then run a "Clean Install" of my Windows OS, hoping that it will fix my SYNC problems.

HT1688 I can not restore and upgrade my Iphone 4. When i plug in to computer itune's restore and check for update buttons are not active.

I can not restore and upgrade my Iphone 4. When i plug in to computer itune's restore and check for update buttons are not active. What is that mean?

Razmee,
Guess what? After posting, I read another thread on this topic where someone said they went to an Apple store and the tech person there added the optional username and password in the Outgoing Mail Server boxes, and then reset the phone again. Although I had tried resetting and restarting a few times today, I had NOT reset it after entering the username and password into the optional fields.
When I entered my username and password into the optional fields, the iPhone entered checks (ticks) to the right of every entry; it had not done this earlier. (I didn't reset at this time, and the outgoing mail would still not transmit).
So just now, I reset it and the outgoing email was sent!
Thanks to you and this forum, it's a great ending to a few frustrating days.
I hope this message helps others. Not only does everything have to be entered correctly in the respective boxes; but once everything is entered and you press the "Done" button, every box should then have a check mark next to it and then you must reset the phone.

SUM and upgrade to EHP Updates to Suite 2013 SP06

Similar Messages

Maybe you are looking for