Sum formula in XL Reporter

Dear all,
When I am using XL reporter, I would like to get the sum of the expanding section in the next row. I've tried =sum(ixref(D12,2)) in D11 cell, but it doens't work.
Please kindly help.
Thank you!
Regards,
Julie

Dear Gordon,
Thank you for your reply.
I've tried a couple of times and realized the formula =sum(ixref(d11, 2) works for upper and lower vertically. The reason why it didn't work is because I created a row expanding section for an account code in row D.
Anyway, it works fine now.Thank you!
Regards,
Julie

Similar Messages

  • Use of Excel Formulas in EVDRE reports

    Dear Freinds,
    I am trying to use excel formulas in EVDER (report).
                                                      2011.MAR
    Account(Base level member)  =SUM(RANGE)
    this at somepaces is working and in some places its  not working. Kindly share the knowldge how to use them in excel

    Hi Vishwanath,
    Whenever we expandan EVDRE report or Input schedule, the formula (if any) in the first cell is applied to the to the other cells as well. Thus in expansion we will loose any formula specified in the other cells.
    If you donot want this to happen, it is better to make the evdre static. This should help you use formulae as required.
    Hope this helps.
    Regards,
    Shoba

  • Sum formula not calculating sum accurately

    Hie All,
    In my Webi report, I've included a sum formula (Sum[actual hours]) for both rows and columns. However, the total is inaccurate for some rows/columns. Any idea why this could happen and how to resolve the issue? Thanks.

    Hi Jeewan,
    You can try these but i'm not sure it will work:
    1. Try merge dimension on common objects.
    2. Try sum(sum([actual hours]))
    3. Instead of using formula you can use the sum function available in "Analysis -> Function -> Σ Sum"
    4. It can be due to the projection used at universe level for this you have to access the universe and check.
    5. Try dragging some compatible objects in object browser it might happens some times that data will not come correctly.
    6. last one (hit and try) check the filters once.
    Hope this helps,
    Thanks,
    Shardendu Pandey

  • Formula line in Report painter

    Hello,
    Can I use 'IF' phrase in Formula column in Report painter ?  If so what's the right Syntax .
    Thank you,
    Ran.

    Hi Ran,
    Glad to hear from you too!
    Did you put '.' in the formula at the end of the message? You shouldn't in this kind of statement, so the expression should be:
    IF X005 > 0 THEN X004 + X003 + X005 ELSE X004 + X003
    Regards,
    Eli
    P.S. I tried it, just in case, and it works.

  • Help needed with Formula in D2K Reports 6i

    I'm trying to write a formula in Developer Reports 6i.The PL/SQL code that I have written isn't getting compiled successfully.I am pasting the code below. Could anyone please tell me where the mistake lies???
    function CF_1Formula return Number is
    declare
    desc varchar2(50);
    amount1 number;
    begin
    SELECT MST_SAL_COMP.vc_sal_desc into desc FROM MST_SAL_COMP,DT_SAL_SLIP,PERSDET where
    <some joining conditions>;
    if desc='BASIC' then
         return amount1;
    end if;     
    exception
         when no_data_found then
              return null;
    end;

    You should rename the variable "desc", as this is a reserved word
    Cheers,
    Gareth

  • Web Service Connection on fresh SUM formula is zero

    I am using Xcelsius SP1.  I have a field in the spreadsheet that has the formula "=SUM(H12:H16)".  I am using a Web Service Connection to refresh the data.  Following a refresh from the web service connection the field with the SUM formula is 0.  I have discovered that ff the values in SUM range (in my case H12:H16) are identical to the refrehsed data then the formulas results willl be 0.  If one of the sum values is different from the original values then the sum formula works.  Is this a bug? Is there a work around?

    I had a problem with the data format after getting number-values from my web-service, because every number-value I got was not a number - it was a string.
    so I had to convert all the data in Excel from string to number values. after that everything works fine for me.
    you could try that out....

  • Accessing trend line formula in Crystal Report

    I am using Crystal Reports 8.5 and CR2008.  I have a report showing a trend line (specifically the quadratic regression).  I can show the formula that is being used for the report in the chart.  How can I access the regression formula in Crystal Reports?
    Thank you for your help.

    hi James,
    in short you can't...the charting engine is a separate 3rd party dll so what you see there is not necessarily available in the rest of cr in summaries etc.
    in order to do things like this, you either have to do the calcs on your database or using formulas. i've attached an example of linear regression that i did a while ago. change the .txt extension to .rpt after you extract the contents. sorry, there are no instructions on how to do this.
    on the attached sample though it does figure out the regression formula and also extrapolate data, show residuals etc.   there are a couple of other "fits" in a parameter but i never finished those as it made my head hurt
    -jamie

  • Change/View formula in the report ?

    Hi SDNer's,
    Is it possible for the user to view the formula used for a calculation in the report ?
    Any close workarounds? What if the user wants even to change the formula from the report ?
    Please share your thoughts.....any inputs wud really help !!
    Envi - Netweaver 7.0, BEx.

    Hi Werner,
    I have seen that feature and that wouldn't really help us. I was looking for a way out for the user to change the formula in the query ( w/o going to query though ), like change A0.68 to A0.75  from report itself.
    Thankyou though !!

  • How to create characterstic formula variable in reporting

    how to create characterstic formula variable in reporting
    tell me any one in steps
    thanks

    HI
    Query Designer -- Select your Char -- Create Char Variable -- Processing type should be Replacment path =In the Replace Variable with drop down box, choose Attribute Value. In the Attribute drop down, select Characteristic Reference
    http://help.sap.com/saphelp_nw70/helpdata/EN/03/6ba03cc24efd1de10000000a114084/frameset.htm
    Hope it helps

  • If I check the sum box on a report item, the words "report total:" appear..

    I would like it to read: Report Total With capital letters.
    Any up would be appreciated.

    Hello,
    Take a look at the "Display this text when printing report sums" setting in the Report Attributes.
    John.
    http://jes.blogs.shellprompt.net
    http://apex-evangelists.com

  • Sum formula doesn't change when add row

    This question is about Numbers.  I have a column of numbers with a sum cell at the bottom of the column.  Sometimes I need to insert a row at the very bottom of the column, just above the cell with the Sum formula.  I then need to tweak the sum formula to include that added row; however, if I add a row in the middle of the column, the sum formula automatically changes to include that added row. 

    Hi c,
    Numbers will automatically adjust the formula if all body cells above the added cell have the same formula, or if the added cell is within the range specified in the formula.
    In the middle of the column, the second is true. At the end of the column, the added cell is outside the range specifired in your formula, and there is at least one regular cell above that does not contain the same formula.
    Use one or more header rows at the top of the table for your labels. Use a Footer row to hold the SUM formula. Place the SUM formula in the Footer row, using =SUM(B) for example to SUM the values in all of the body cells in column B.
    Regards,
    Barry

  • Sum formula for tables

    I have made the switch from MS to MAC and word to pages and so far am as happy as can be!
    Then, I go to add a sum formula to a list of numbers in a table column so that I can have a total at the bottom of the column.....AND, I can't find a way to do this in pages.
    I've searched this forum but can't find anything, so I am sure it is me and not pages that has the problem. Surely pages wouldn't leave out the ability to sum a column of numbers?

    A table is not a spreadsheet &, currently, iWork does not have a spreadsheet application. I do believe CalcService by Devon Technologies can do some basic calculations in a spreadsheet.

  • Sum formula by Group

    Hello, I'm having a problem getting this summary to work. I have a group {PRDT.PREndDate} which is a date field and I have a sum formula that adds two fields. The problem is when I try to limit the sum to the {PRDT.PREndDate}  group I get an error "There must be a group that matches this field". I'm sure I'm missing something in my formula.
    here's the formula:
    sum({@EC1}, {PRDT.PREndDate})+
    sum({@EC2}, {PRDT.PREndDate})
    Thanks,
    Gerald

    My Group Header #2 is {PRDT.PREndDate} , does it matter that the field type is Date? Here are the other formulas:
    @EC1
    if {PRDT.EDLType}='E' and {?EC1}={PRDT.EDLCode} then
         -({PRDT.Amount})
    else
        0
    @EC2
    if {PRDT.EDLType}='E' and {?EC2}={PRDT.EDLCode} then
         -({PRDT.Amount})
    else
        0
    Edited by: akamax_power on Aug 5, 2009 6:51 PM
    Edited by: akamax_power on Aug 5, 2009 6:53 PM

  • Apply my own formula when user presses sum button in a report

    Hi all,
    I have this requirement that when user presses SUM button for a particular field in a report instead of Summing it up and displaying I can apply my own formula and display its value. 
    For Ex :  When we press sum button for field efficiency :
    EFFICIENCY
    10
    11
    05
    26 - It would sum it up and display 26 , where as i don't want it to display 26 i want to apply a separate formula and display that value

    Suggest to add another custom button to the ALV toolbar and write the desired logic you want.
    Also to avoid confusion, disable the standard summation button. (you can add the same icon for the custom button if you wish)
    Thanks,

  • Using a sum formula with a data and text row?

    In 9.3.1 Financial reporting.
    One row is retrieving values from essbase connection and is a data row
    the second row is a fixed amount (390K) and was entered as a text row.
    The third row is the formula row that sums up row 1 and row 2
    However the total shows only the value of the data row (row 1)
    I read the doc and it doesn't say you cannot do a formula between data and text rows but it doesn't see to work. Anyone get by this without having to create a dimension to dump a fixed number in to report off of?
    JTS

    You are right on.. A text row by definition and functionality is to be considered as a text, and not as a number [Even though the text can be number based].
    Did you try something like this?
    sum(row[41],390)
    As you referred, you can always add a member in essbase DB
    Cheers
    RS

Maybe you are looking for

  • "Error while accessing porting layer for ORACLE database via getSessionId()

    Hi, My ejb3.0 Entity is created from Emp table in scott/tiger schema of an Oracle 10g database. I am guessing I made some mistake creating the datasource or uploading the driver, because when I run my application, I get a long exception stack trace.

  • External TV Monitor not clear

    Hello, I have a Macbook Pro 15" from Mid 2010 and today I went and bought a Mini displayport to HDMI connection so I could use a TV as a monitor and clamshell. The TV is an Emerson LC220EM1. Which is a 22" monitor. I am having problems getting the TV

  • How to backup changes?

    I tend to offload a full card 32GB of images on my SSD on my laptop and start having the computer import and change to DNG while on the drive home. Then when I get back into the office I make virtual copies of images and edit those. As I understand t

  • Replenishmant storage location in MF60(reservation creation)

    Hello, In REM, we are using MF60 for two step material staging. We have gone for two stage staging process. First shop person will create reservation and then the store person will issue the material against the reservation. Here when the resrvation

  • Integrationevent wsdlLocation java client

    Hi All, I've read the webservice on demand guide but, I don't have a clue how to do this with the integrationevent webservice. I was able to connect to the pod and get the session id with java (client generated with jdeveloper) but now i struggle how