SUM - How to check which phase is running in logs
Hello!
I'm asking if it's possible to check which phase is running in SUM without GUI? I have access only to logs. It is a ERP 6.0 to ERP 6.0 EHP5 in linux and db2.
I hope you can help me.
Thank you!
Darío.
Thank you Reagan Benjamin, I figured out that ULOG14_1 file in <upgrade_directory>/abap/log directory provides the information I was looking for.
Regards, Darío
Similar Messages
-
How to check which form is running on web
Hello.
Is it possible to check which form is running on web, on AS?
When you go on AS to forms/user session node, you can only see config name of forms (or form name if you haven't set config)
We have set our configuration for running forms in formsweb.cfg under configuration section.
Now under user session we can only see config name and not which forms is running currently under this config (user can access many forms in this configuration).
Is there some other way to check which form is currently running (and by which user) under the config?
Any idea?
ThanksAny idea?
-
How can check which patch install in oracle 10g
hi experts,
i have use oracle 10g , i hv patch information but how can check which patch install ?Run following command , it will give you list of patches installed on Oracle Home
cd ORACLE_HOME/OPatch
opatch lsinventory
For patchset and CPU patch , check/query DBA_REGISTRY_HISTORY
Virag -
how to check which version of hyperic is installed , hyperic 32 bit or 64 bit version on solaris
If you have only a single home, the quickest/easiest way is probably just to check the properties of %ORACLE_HOME%\odp.net\bin\2.x\oracle.dataacess.dll
Or are you asking how to check it at runtime?
If you want to see externally what is actually loaded by an app you can use process explorer
http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx
If you want to check it in the app itself:
http://stackoverflow.com/questions/383686/how-do-you-loop-through-currently-loaded-assemblies
Hope it helps,
Greg -
HI
how to check RBS maintainer is running after deleting orphan blobs and while deleting the blobs from rbs storage,
and also how to stop the RBS maintainer for a specific content db.
when I run below query I found the orphancleanup value true
SELECT [config_key],[config_value] FROM [mssqlrbs_resources].[rbs_internal_config]
where config_key='orphan_cleanup_in_progress'
adilHI
the RBS maintainer was run from one of web front end server And for one content database , that fine
but I now know this information only this did by other administrators.
Now I did not found this Maintainer running in windows task scheduler, but blobs are decreasing from content database RBS storage folder, and also I found this maintainer running I checked from when run sql queriy in sql
server
SELECT
[config_key],[config_value]
FROM
[mssqlrbs_resources].[rbs_internal_config]
where
config_key='orphan_cleanup_in_progress’
it given me true
here now I want to stop this orphan cleane up , what settings and script I will run?
adil -
How to check which version of Jdk installed on the machine?
How to check which version of Jdk installed on the machine?
& Which version of Oracle Insatlled on my machine?String version = System.getProperty("java.version"); %
-
How to check which PSA is having more data
Hi,
I want to delete the PSA, and check which PSA is having huge space is occupied, from table RSTSODS we can check the availble psa`s how can we check PSA database.
we have to configure in db02 ?
Regards,
VamsiFor checking the which PSA having more data then run ST14 tcode for getting top 30 objects which has PSA also
in that case you have set a procedure to overcome that...by inlcuding those things in Process chain so that deletion will happen if the data gets older by certain days...if not you can go with any program where you can use FM's given SAP .. so that your system wont go into oversize... -
How to check which query is consuming most resources....
Hi guys how can i check which query is consuming most resources , run by which user and how to kill that....
Khurana1) At the first stage, login to the server and at the OS level I run commands like TOP and see the overall performance of the Server. From this one can know the Total CPU Memory, CPU Usage, Memory Available, and Swap Memory Available and how busy the CPU is.
2) Once you identify the top processes in the CPU, relate them to ORACLE using V$PROCESS.SPID = OS Process ID to get the V$PROCESS.ADDR and join this with the V$SESSION.PADDR to get the V$SESSION.SID and SERIAL# columns.
3) Then enable the Session Trace using DBMS_SYSTEM.SET_SQL_TRACE_IN_SESSION.
4) look on the Trace File using the TKPROF. During this sort the Trace File using various options like EXEELA/DSK, PRSELA/DSK, FCHELA /DSK.
5) Once you identify the expensive SQL statements, inform the user about it and KILL the respective job. -
How to check bit mode of running JVM
HI experts,
i am using JNI which are 64 bit . libraries looks well at their proper place.
but stll i m facing error
[java.lang.UnsatisfiedLinkError: /xxx/xxx/xxx/xxx/native_bin/mylib.so: ld.so.1: java: fatal: /xxx/xxx/xxx/xxx/native_bin/mylib.so: wrong ELF class: ELFCLASS64]]
i want to confirm about bit mode of running JVM as it should be 64 bit.
i m using solaris 9. can any body tell how to check running JVM bit mode that is (wheather it is 32 bit or 64 bit)
thanxHI experts,
i am using JNI which are 64 bit . libraries looks well at their proper place.
but stll i m facing error
[java.lang.UnsatisfiedLinkError: /xxx/xxx/xxx/xxx/native_bin/mylib.so: ld.so.1: java: fatal: /xxx/xxx/xxx/xxx/native_bin/mylib.so: wrong ELF class: ELFCLASS64]]
i want to confirm about bit mode of running JVM as it should be 64 bit.
i m using solaris 9. can any body tell how to check running JVM bit mode that is (wheather it is 32 bit or 64 bit)
thanx -
How to check which column data differs from master table and archive table
Hi All,
i have two tables, table a (a1 number,a2 varchar2,a3 varchar2) and table b (b1 number,b2 varchar2,b3 varchar2).
how to check the data in both the table are same( including all columns).
data in a.a1 is same as b.b1 and a.a2 is same as b.b2 like that.
if they not same , i need to know which field differs.
Kindly Share ur ideas.887268 wrote:
thanks Sven W. ,
above reply clearly shows what my question is.
one column must be primary key, based on that key i need to find out which are the fields having different data..
im strugling with this, i tried the following already, but not able to get.
select the columns from a MINUS select the columns from b.
-- from this i can find whether the difference occurred or not.
but i cant able to get which are the fields value changed.Good. Then you would match the rows using the PK column and need to compare the columns
Instead of a MINUS + UNION ALL + MINUS we can now use a FULL OUTER JOIN
It is a little task to write out all column names, but 40 columns can be handled.
This statement would show you both tables with matching rows on the same line.
select a.*, b.*
from a
FULL OUTER JOIN b on a.id = b.idNow filter/check for mismatches
select case when a.col1 != b.col1 then 'COL1 value changed'
when a.col2 != b.col2 then 'COL2 value changed'
when a.col3 != b.col3 then 'COL3 value changed'
end as compare_result
,a.*, b.*
from a
FULL OUTER JOIN b on a.id = b.id
/* return only non matching columns */
where (a.col1,a.col2,a.col3) != (b.col1,b.col2,b.col3) You might need to add nvls to take care of null values. Test this!
Another way could be to group upon the primary key
select *
from (
select id
,count(distinct col1)-1 cnt_col1
,count(distinct col2)-1 cnt_col2
,count(distinct col3)-1 cnt_col3
from
select 'A' source, a.*
from a
UNION ALL
select 'B' source, b.*
from b)
group by ID
/* only records with differences */
where 1 in (cnt_col1, cnt_col2, cnt_col3)
;The count columns will hold either 1 or 0. If it is 1 then this column has a difference. -
How to check which administrator had modified the AD Group properties
Dear Sir,
Some one had modified a Distribution group (removed email address). I checked it in group properties and last modified was on 22/09/14. How to find which administrator had modified.
I dont have access to domain controller. Is there any way to find it?
thanks in advance.
KaranHello,
this will be logged on DCs and also auditing must be configured correct that this will show up in the event viewer from a DC.
Without access to the DC contact your administrators and let them find out.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter: -
How to check which is th best method to use in LSMw and the file
Hi all,
I am new to LSMW,
Can know me when i get the file , how to check the which is the Best method ( Batch input, Direct input,BAPI, IDOC) have to use in LSMW .
How to check the input file is completely filled and how to check whether it is correct and also how to Prevalidation check has to be done fior the file before uploading.
Can you provide any documents LSMW also Apprecited.
Regards,
MadhaviHi Madhavi,
To check Correctness & completeness of the file:
1. The input file structure should be same as source structure what you defined whicle creating LSMW.
2. Check the following steps to assure the field mapping is done correctly.
a) Maintain field mapping & conversion rule
b) Check 'Display Read data'
c) Check ' Display Converted data''
Please note LSMW is a tool, which will simply upload the data whatever you are providing. So you need to be careful while making your file and validate it outside SAP ( before upload start)
Pradeep D -
How to check which table is used
After creating RFQ , i want to check which table is used in creating RFQ.
how can i see that data has gone or not into the database table.Hi
See the Table EKKO and EKPO only
with EKKO-BSTYP = A
Regards
Anji -
Basic Question - How to check which version of XMLP I have ?
I have seen several posts mentioning few features work from XMLP 5.5
Where would i check which version we have ?Hi,
Run the following query to find the version installed.
SELECT DECODE(bug_number
,'3120489', '3.5.0 Installed'
,'3395631', '4.3.0 Installed'
,'3554612', '4.5.0 Installed'
,'3822219', '5.0.0 Installed'
,'4236958', '5.0.1 Installed'
,'4206181', '5.5.0 Installed'
,'4561451', '5.6.0 Installed'
,'4905678', '5.6.1 Installed'
,'5097966', '5.6.2 Installed'
,'5472959', '5.6.3 Installed'
FROM ad_bugs
WHERE bug_number IN
'3120489'
,'3395631'
,'3554612'
,'3822219'
,'4236958'
,'4206181'
,'4561451'
,'4905678'
,'5097966'
,'5472959'); -
How to find which backups are running - whether RMAN or EXPORT or EXPDP ?
I need to find using SQL which backups are running at a particular time . I want to use SQL for this.
Hi,
Check the V$session view to get it.
SELECT SID,PROGRAM FROM V$SESSIONThe program will give you the
In case of export it will give you - exp.exe under the PROGRAM
In case of expdp it will give you - expdp.exe under the PROGRAM
In case of RMAN session it will give you -
SID PROGRAM
140 exp.exe
158 expdp.exe
138 rman.exe
149 rman.exeRegards,
Vijayaraghavan K
Maybe you are looking for
-
Why do Hebrew language characters show as question marks?
On my office web, when an email from Israel is posted , the title is shown as question marks. When I respond or forward a Hebrew text it also comes up as question marks
-
Loading local PDF, iOS, iPad2
Hi I'm trying to make my application view local PDF on iPad. This pdf was downloaded from internet into app-storage dir. Here is some code: var f:File = new File(obj.url); var webView = new StageWebView(); webView.stage=parent.stage; webView.viewPor
-
Adding a Z field in Standard Database view
Hi ALL My requirement is to add a z field in a Standard Database View . Please advice how do i go ahead . Urgent help will be appreciated . Thanks Shweta
-
Price Matrix - Multiple Product Attributes
Hi, I need to set prices for 1 product based on combination of selected multiple attributes. How can I do this? Product A Material Size Price material 1 s 10 m 12 l 15 material 2 s 20 m 25 l 30 xl 35 xxl 63 material 3 l 80 xl 100
-
Hi all, in my WD application controller I'm executing some code in wddoInit method and, depending from the result of this code, I'd like to plug one view or another. I try to use the wddoBeforeNavigation to fire an event, catch it in the default