Sum in ALV grid display using objects
Hi Experts,
I have created a Report with ALV using objects and also am able to get SUM for some fields using do_sum = 'X'.
My problem is i want to do some calculation using the total amount which i have got, how can i do that (or can it be done??).
Thanks in Advance...
Santosh
Hi this may be of some help.
ABAP List Viewer
The common features of report are column alignment, sorting, filtering, subtotals, totals etc. To implement these, a lot of coding and logic is to be put. To avoid that we can use a concept called ABAP List Viewer (ALV).
This helps us to implement all the features mentioned very effectively.
Using ALV, We can have three types of reports:
1. Simple Report
2. Block Report
3. Hierarchical Sequential Report
There are some function modules which will enable to produce the above reports without much effort.
All the definitions of internal tables, structures and constants are declared in a type-pool called SLIS.
1. SIMPLE REPORT.
The important function modules are
a. Reuse_alv_list_display
b. Reuse_alv_fieldcatalog_merge
c. Reuse_alv_events_get
d. Reuse_alv_commentary_write
e. Reuse_alv_grid_display
A. REUSE_ALV_LIST_DISPLAY : This is the function module which prints the data.
The important parameters are :
I. Export :
i. I_callback_program : report id
ii. I_callback_pf_status_set : routine where a user can set his own pf status or change the functionality of the existing pf status
iii. I_callback_user_command : routine where the function codes are handled
iv. I_structure name : name of the dictionary table
v. Is_layout : structure to set the layout of the report
vi. It_fieldcat : internal table with the list of all fields and their attributes which are to be printed (this table can be populated automatically by the function module REUSE_ALV_FIELDCATALOG_MERGE
vii. It_events : internal table with a list of all possible events of ALV and their corresponding form names.
II. Tables :
i. t_outtab : internal table with the data to be output
B. REUSE_ALV_FIELDCATALOG_MERGE : This function module is used to populate a fieldcatalog which is essential to display the data in ALV. If the output data is from a single dictionary table and all the columns are selected, then we need not exclusively create the field catalog. Its enough to mention the table name as a parameter(I_structure name) in the REUSE_ALV_LIST_DISPLAY. But in other cases we need to create it.
The Important Parameters are :
I. Export :
i. I_program_name : report id
ii. I_internal_tabname : the internal output table
iii. I_inclname : include or the report name where all the dynamic forms are handled.
II Changing
ct_fieldcat : an internal table with the type SLIS_T_FIELDCAT_ALV which is
declared in the type pool SLIS.
C. REUSE_ALV_EVENTS_GET : Returns table of possible events for a list type
Parameters :
I. Import :
Et_Events : The event table is returned with all possible CALLBACK events
for the specified list type (column 'NAME'). For events to be processed by Callback, their 'FORM' field must be filled. If the field is initialized, the event is ignored. The entry can be read from the event table, the field 'FORM' filled and the entry modified using constants from the type pool SALV.
II. Export :
I_List_type :
0 = simple list REUSE_ALV_LIST_DISPLAY
1 = hierarchcal-sequential list REUSE_ALV_HIERSEQ_LIST_DISPLAY
2 = simple block list REUSE_ALV_BLOCK_LIST_APPEND
3 = hierarchical-sequential block list
REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_COMMENTARY_WRITE : This is used in the Top-of-page event to print the headings and other comments for the list.
Parameters :
I. it_list_commentary : internal table with the headings of the type slis_t_listheader.
This internal table has three fields :
Typ : H header, S selection , A - action
Key : only when typ is S.
Info : the text to be printed
E. REUSE_ALV_GRID_DISPLAY : A new function in 4.6 version, to display the results in grid rather than as a preview.
Parameters : same as reuse_alv_list_display
This is an example for simple list.
2. BLOCK REPORT
This is used to have multiple lists continuously.
The important functions used in this report are:
A. REUSE_ALV_BLOCK_LIST_INIT
B. REUSE_ALV_BLOCK_LIST_APPEND
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_BLOCK_LIST_DISPLAY
A. REUSE_ALV_BLOCK_LIST_INIT
Parameters:
I. I_CALLBACK_PROGRAM
II. I_CALLBACK_PF_STATUS_SET
III. I_CALLBACK_USER_COMMAND
This function module is used to set the default gui status etc.
B. REUSE_ALV_BLOCK_LIST_APPEND
Parameters :
Export :
I. is_layout : layout settings for block
II. it_fieldcat : field catalog
III. i_tabname : internal table name with output data
IV. it_events : internal table with all possible events
Tables :
i. t_outtab : internal table with output data.
This function module adds the data to the block.
Repeat this function for all the different blocks to be displayed one after the other.
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
This function module is used for hierarchical sequential blocks.
D. REUSE_ALV_BLOCK_LIST_DISPLAY
Parameters : All the parameters are optional.
This function module display the list with data appended by the above function.
Here the functions REUSE_ALV_FIELDCATALOG_MERGE, REUSE_ALV_EVENTS_GET, REUSE_ALV_COMMENTARY_WRITE can be used.
3. Hierarchical reports :
Hierarchical sequential list output.
The function module is
A. REUSE_ALV_HIERSEQ_LIST_DISPLAY
Parameters:
I. Export:
i. I_CALLBACK_PROGRAM
ii. I_CALLBACK_PF_STATUS_SET
iii. I_CALLBACK_USER_COMMAND
iv. IS_LAYOUT
v. IT_FIELDCAT
vi. IT_EVENTS
vii. i_tabname_header : Name of the internal table in the program containing the
output data of the highest hierarchy level.
viii. i_tabname_item : Name of the internal table in the program containing the
output data of the lowest hierarchy level.
ix. is_keyinfo : This structure contains the header and item table field
names which link the two tables (shared key).
II. Tables
i. t_outtab_header : Header table with data to be output
ii. t_outtab_item : Name of the internal table in the program containing the
output data of the lowest hierarchy level.
slis_t_fieldcat_alv : This internal table contains the field attributes. This internal table can be populated automatically by using REUSE_ALV_FIELDCATALOG_MERGE.
Important Attributes :
A. col_pos : position of the column
B. fieldname : internal fieldname
C. tabname : internal table name
D. ref_fieldname : fieldname (dictionary)
E. ref_tabname : table (dictionary)
F. key(1) : column with key-color
G. icon(1) : icon
H. symbol(1) : symbol
I. checkbox(1) : checkbox
J. just(1) : (R)ight (L)eft (C)ent.
K. do_sum(1) : sum up
L. no_out(1) : (O)blig.(X)no out
M. outputlen : output length
N. seltext_l : long key word
O. seltext_m : middle key word
P. seltext_s : short key word
Q. reptext_ddic : heading (ddic)
R. ddictxt(1) : (S)hort (M)iddle (L)ong
S. datatype : datatype
T. hotspot(1) : hotspot
with regards,
Hema Sundara.
pls reward if u find it helpful.
Similar Messages
-
Set cursor alv grid (not using objects)
I got a question on ALV GRID (not using objects), please let me know if you have pointers. Thanks.
Output has 2 screens both has different contents. The output is generated using internal table1 and 2 and using FM 'REUSE_ALV_GRID_DISPLAY_LVC' (both screen use same FM).
First screen has multiple pages of output (say 10 pages). User scrolled page 5 and line 10 of first screen and then double clicked it takes to screen #2. After completion of screen #2, the back arrow should get back to page 5 and line 10 of screen #1. Currently the back arrow gets to screen#1 page 1 and line 1. How to remember the cursor position in alv grid and instruct the cursor to go there?
Appreciate the input.
Note: I tried "set cursor line n" with "Scroll" command but no luck. http://help.sap.com/saphelp_nw70/helpdata/EN/9f/dba47e35c111d1829f0000e829fbfe/content.htmThanks for the inputs.
FYI, I got it implemented using method CALL METHOD <ref.var. to CL_GUI_ALV_GRID > ->set_current_cell_via_id
The method is called by 'REUSE_ALV_GRID_DISPLAY_LVC' form 'PF_STATUS_SET' when the ALV grid output is presented each time.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY_LVC'
EXPORTING
i_bypassing_buffer = 'X'
i_callback_program = gc_repid
i_callback_pf_status_set = 'PF_STATUS_SET'
i_callback_user_command = 'USER_COMMAND'
is_layout_lvc = lwa_layout
it_fieldcat_lvc = git_fc_lvc
i_default = ' '
TABLES
t_outtab = git_data
EXCEPTIONS
program_error = 1
OTHERS = 2.
FORM alv_event_pf_status_set USING rt_extab
TYPE slis_t_extab.
DATA lo_ref1 TYPE REF TO cl_gui_alv_grid.
*Get the reference to class "lo_ref1" for the ALV report
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
e_grid = lo_ref1.
*set the focus of cursor in ALV
CALL METHOD lo_ref1->set_current_cell_via_id
EXPORTING
is_row_no = gv_row. "row number where you want to focus the cursor
ENDFORM. -
Adding color to a row in alv grid not using object oriented.
Hello Gurus.
I want to display a row in color in alv grid using normal alv, not by using object oriented programming.
I am having one of the field say spart ie division in internal table itab.
The spart has values like 12 , 45, 67, 68 ,88 ,99.
when ever spart is 12 i want to display that row in color format. Here this table is sorted by mblnr so if 1st record is 12 then may be 50 th record will be 12. so when where the record contains the value has 12 then that row should be displayed in color. So please tell me how to do it. Previously i posted the same question but i got is by using object oriented. so please tell me how to do it without using object oriented.
Thanks for all the replies.Check this example code.
report zrich_0004
no standard page heading.
type-pools slis.
data: fieldcat type slis_t_fieldcat_alv.
data: begin of imara occurs 0,
matnr type mara-matnr,
mtart type mara-mtart,
maktx type makt-maktx,
color_line(4) type c,
tcolor type slis_t_specialcol_alv, "cell
end of imara.
data: xcolor type slis_specialcol_alv.
start-of-selection.
perform get_data.
perform write_report.
* Get_Data
form get_data.
imara-matnr = 'ABC'.
imara-mtart = 'ZCFG'.
imara-maktx = 'This is description for ABC'.
append imara.
imara-matnr = 'DEF'.
imara-mtart = 'ZCFG'.
imara-maktx = 'This is description for DEF'.
append imara.
imara-matnr = 'GHI'.
imara-mtart = 'ZCFG'.
imara-maktx = 'This is description for GHI'.
append imara.
loop at imara.
if sy-tabix = 1.
imara-color_line = 'C410'. " color line
endif.
if sy-tabix = 2. "color CELL
clear xcolor.
xcolor-fieldname = 'MTART'.
xcolor-color-col = '3'.
xcolor-color-int = '1'. "Intensified on/off
xcolor-color-inv = '0'.
append xcolor to imara-tcolor.
endif.
modify imara.
endloop.
endform.
* WRITE_REPORT
form write_report.
data: layout type slis_layout_alv.
layout-coltab_fieldname = 'TCOLOR'.
layout-info_fieldname = 'COLOR_LINE'.
perform build_field_catalog.
* CALL ABAP LIST VIEWER (ALV)
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
is_layout = layout
it_fieldcat = fieldcat
tables
t_outtab = imara.
endform.
* BUILD_FIELD_CATALOG
form build_field_catalog.
data: fc_tmp type slis_t_fieldcat_alv with header line.
clear: fieldcat. refresh: fieldcat.
clear: fc_tmp.
fc_tmp-reptext_ddic = 'Material Number'.
fc_tmp-fieldname = 'MATNR'.
fc_tmp-tabname = 'IMARA'.
fc_tmp-outputlen = '18'.
append fc_tmp to fieldcat.
clear: fc_tmp.
fc_tmp-reptext_ddic = 'Material Type'.
fc_tmp-fieldname = 'MTART'.
fc_tmp-tabname = 'IMARA'.
fc_tmp-outputlen = '4'.
append fc_tmp to fieldcat.
clear: fc_tmp.
fc_tmp-reptext_ddic = 'Material'.
fc_tmp-fieldname = 'MAKTX'.
fc_tmp-tabname = 'IMARA'.
fc_tmp-outputlen = '40'.
fc_tmp-emphasize = 'C610'. " color column
append fc_tmp to fieldcat.
endform.
Regards,
Rich Heilman -
Error in field catalog in ALV grid display using classes at do_sum = "X'.
Hi,
I'm using classes in ALV Grid display.
the code for the field catalog is going to dump because of the statement in the field catalog for field 'netwr',do_sum = 'X'.
that do_sum = 'X' is not working and going to dump when executed.with out that do_sum it is working fine. the error in dump analysys is showing sap standard incude LSLVCF01.
assign component
<ls_fieldcat>-fieldname of structure rt_data to <g_field>.
if sy-subrc ne 0.
message x000(0k).
endif.
sy-subrc is 4 when the program is being executed.
CODE:
FORM prepare_field_catalog CHANGING pt_fieldcat TYPE lvc_t_fcat.
DATA ls_fcat TYPE lvc_s_fcat.
ls_fcat-fieldname = 'VBELN1'.
ls_fcat-ref_field = 'VBELN'.
ls_fcat-ref_table = 'VBRK'.
ls_fcat-coltext = 'Invoice No'.
ls_fcat-seltext = 'Invoice No'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR ls_fcat.
ls_fcat-fieldname = 'BUDAT'.
ls_fcat-ref_table = 'BKPF'.
ls_fcat-coltext = 'Invoice Date'.
ls_fcat-seltext = 'Invoice Date'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR ls_fcat.
ls_fcat-fieldname = 'NETWR'.
ls_fcat-ref_field = 'NETWR'.
ls_fcat-ref_table = 'VBRK'.
ls_fcat-coltext = 'Value of Invoice'.
ls_fcat-seltext = 'Value of Invoice'.
ls_fcat-datatype = 'CURR'.
ls_fcat-do_sum = 'X'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR ls_fcat.
ENDFORM.
can u please look in the code and rectify the error,
would appeciate ur response.
regards,
veera.Hi,
try this..
ls_fcat-fieldname = 'NETWR'.
ls_fcat-ref_field = 'NETWR'.
ls_fcat-ref_table = 'VBRK'.
ls_fcat-coltext = 'Value of Invoice'.
ls_fcat-seltext = 'Value of Invoice'.
ls_fcat-datatype = 'CURR'.
ls_fcat-do_sum = 'X'.
<b>ls_fcat-cfieldname = 'WAERS'.</b>
APPEND ls_fcat TO pt_fieldcat.
CLEAR ls_fcat.
Regards
vijay -
ALV GRID DISPLAY USING FACTORY METHODS
Hi all
I am using factory methods for my alv grid display.
I have a list of functionalities, for which i am not able to find a correct method..
1) Header of alv(with all the values of the selection-screen)
2)How to give text to a subtotal(ed) column, i.e. if i subtotal a qty field against a sorted field, i want to display ==> Nett Wt. = 123.00 (for first header entry) and so on for each header entry.
3)how to remove the zeroes from a quantity field?
4) Displaying the cells as blanks where data is 0( for quantity fields if i have a cell with zero value, it should be blank.)
5) double click on a cell to open a transaction with the cell's value.
Any help on this would be appreciated.
Points will be rewarded for sure...
Thanks & Regards
Ravish GargHello Ravish
Regarding the display of zero values as empty cells have a look at my <i>modified </i>sample report <b>ZUS_SDN_CL_SALV_TABLE_INTERACT</b>.
*& Report ZUS_SDN_CL_SALV_TABLE_INTERACT
REPORT zus_sdn_cl_salv_table_interact.
TYPE-POOLS: abap.
DATA:
gt_knb1 TYPE STANDARD TABLE OF knb1.
DATA:
go_table TYPE REF TO cl_salv_table,
go_events TYPE REF TO cl_salv_events_table.
* CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
CLASS-METHODS:
handle_double_click FOR EVENT
if_salv_events_actions_table~double_click
OF cl_salv_events_table
IMPORTING
row
column.
ENDCLASS. "lcl_eventhandler DEFINITION
* CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_double_click.
* define local data
DATA:
lo_table TYPE REF TO cl_salv_table,
lt_orders TYPE STANDARD TABLE OF bapiorders,
ls_knb1 TYPE knb1.
READ TABLE gt_knb1 INTO ls_knb1 INDEX row.
IF ( syst-subrc = 0 ).
CALL FUNCTION 'BAPI_SALESORDER_GETLIST'
EXPORTING
customer_number = ls_knb1-kunnr
sales_organization = '1000'
* MATERIAL =
* DOCUMENT_DATE =
* DOCUMENT_DATE_TO =
* PURCHASE_ORDER =
* TRANSACTION_GROUP = 0
* PURCHASE_ORDER_NUMBER =
* IMPORTING
* RETURN =
TABLES
sales_orders = lt_orders.
* Create ALV grid instance
TRY.
CALL METHOD cl_salv_table=>factory
* EXPORTING
* LIST_DISPLAY = IF_SALV_C_BOOL_SAP=>FALSE
* R_CONTAINER =
* CONTAINER_NAME =
IMPORTING
r_salv_table = lo_table
CHANGING
t_table = lt_orders.
CATCH cx_salv_msg .
ENDTRY.
lo_table->display( ).
** SET PARAMETER ID 'BUK' FIELD ls_knb1-bukrs.
** SET PARAMETER ID 'KUN' FIELD ls_knb1-kunnr.
** CALL TRANSACTION 'XD03' AND SKIP FIRST SCREEN.
ENDIF.
ENDMETHOD. "handle_double_click
ENDCLASS. "lcl_eventhandler IMPLEMENTATION
START-OF-SELECTION.
SELECT * FROM knb1 INTO TABLE gt_knb1
WHERE bukrs = '1000'.
* Create ALV grid instance
TRY.
CALL METHOD cl_salv_table=>factory
* EXPORTING
* LIST_DISPLAY = IF_SALV_C_BOOL_SAP=>FALSE
* R_CONTAINER =
* CONTAINER_NAME =
IMPORTING
r_salv_table = go_table
CHANGING
t_table = gt_knb1.
CATCH cx_salv_msg .
ENDTRY.
* Create event instance
go_events = go_table->get_event( ).
* Set event handler
SET HANDLER:
lcl_eventhandler=>handle_double_click FOR go_events.
PERFORM modify_columns.
go_table->display( ).
END-OF-SELECTION.
*& Form MODIFY_COLUMNS
* text
* --> p1 text
* <-- p2 text
FORM modify_columns .
* define local data
DATA:
lt_dfies TYPE ddfields,
ls_dfies TYPE dfies,
lo_typedescr TYPE REF TO cl_abap_typedescr,
lo_strucdescr TYPE REF TO cl_abap_structdescr,
lo_tabledescr TYPE REF TO cl_abap_tabledescr,
lo_columns TYPE REF TO cl_salv_columns_table,
lo_column TYPE REF TO cl_salv_column.
lo_columns = go_table->get_columns( ).
lo_typedescr = cl_abap_typedescr=>describe_by_data( gt_knb1 ).
lo_tabledescr ?= lo_typedescr.
lo_strucdescr ?= lo_tabledescr->get_table_line_type( ).
lt_dfies = lo_strucdescr->get_ddic_field_list( ).
LOOP AT lt_dfies INTO ls_dfies.
lo_column = lo_columns->get_column( ls_dfies-fieldname ).
IF ( ls_dfies-keyflag = abap_true ).
CONTINUE.
ELSEIF ( ls_dfies-fieldname = 'WEBTR' ). " Bill of ex. limit
lo_column->set_zero( if_salv_c_bool_sap=>true ). " display zero
lo_column->set_zero( if_salv_c_bool_sap=>false ). " hide zero
ELSE.
lo_column->set_technical( if_salv_c_bool_sap=>true ). " hide col
ENDIF.
ENDLOOP.
ENDFORM. " MODIFY_COLUMNS
Regards
Uwe -
ALV GRID Display using oops in sub screen in which sub screen is in tab
Hi Mac,
My requirement is to display an ALV Grid with data in a subscreen which is called in tab strip.
Could you please help me the code of how actaully i can call th ALV in the tab.
I want to display one field in editable and remaining 4 fields in display mode.
Does any one had faced the same issue.This is standard program cloning object.
Thanks
Satish Rajuwhat is the question? Callin grid in subscreen is the same as in other screen. Create PBO module for creating the grid, PAI to evaluate comands.
Regards,
Clemens -
Dump when summing up CURR field in ALV GRID display
Hi All,
I am getting dump when I try to sum the CURR field in my ALV Grid Display. The field is of CURR 23. I am using classes and methods to display alv grid.
I tried passing <fs_fieldcat>-do_sum = 'X'. When I did this, it is dumping without even displaying the alv grid.
Here is the part it is throwing dump:
ls_lvc_data-value = space.
clear ls_lvc_data-style.
loop at it_fcat_local assigning <ls_fcat>
where tech ne 'X' and no_out ne 'X'.
if l_invisible eq 'X'.
clear l_invisible.
if <ls_fcat>-do_sum is initial.
continue.
else.
clear ls_lvc_data-col_pos.
endif.
endif.
add 1 to ls_lvc_data-col_pos.
assign component <ls_fcat>-fieldname
of structure <ls_data> to <l_field_value>.
_if sy-subrc ne 0.
message x000(0k).
endif._
Regards,
GuruThomas,
Here is the dump:
Runtime Errors MESSAGE_TYPE_X
Date and Time 10/22/2010 23:30:53
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Error analysis
Short text of error message:
Long text of error message:
Technical information about the message:
Message class....... "0K"
Number.............. 000
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"SAPLSLVC" or "LSLVCF36"
"FILL_DATA_TABLE"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
Source Code Extract
Line
SourceCde
2708
is_subtottxt_info = ls_subtot_info
2709
ip_subtot_line = lr_data
2710
changing
2711
c_subtottxt = l_subtottxt.
2712
ls_lvc_data-value = l_subtottxt.
2713
2714
append ls_lvc_data to ct_lvc_data.
2715
endif.
2716
2717
2718
Column per Fieldcat Entry
2719
2720
ls_lvc_data-value = space.
2721
clear ls_lvc_data-style.
2722
loop at it_fcat_local assigning <ls_fcat>
2723
where tech ne 'X' and no_out ne 'X'.
2724
if l_invisible eq 'X'.
2725
clear l_invisible.
2726
if <ls_fcat>-do_sum is initial.
2727
continue.
2728
else.
2729
clear ls_lvc_data-col_pos.
2730
endif.
2731
endif.
2732
2733
add 1 to ls_lvc_data-col_pos.
2734
2735
assign component <ls_fcat>-fieldname
2736
of structure <ls_data> to <l_field_value>.
2737
if sy-subrc ne 0.
>>>>>
message x000(0k).
2739
endif.
2740
2741
*... work on average
2742
if <ls_fcat>-do_sum eq 'C'.
2743
Initialize average result and entries
2744
<l_field_value> = 0.
2745
clear l_entries.
2746
2747
retrive unit from fieldcatalog
2748
assign space to <l_unit>.
2749
if not <ls_fcat>-cfieldname is initial.
2750
assign component <ls_fcat>-cfieldname
2751
of structure <ls_data> to <l_unit>.
2752
endif.
2753
if not <ls_fcat>-qfieldname is initial.
2754
assign component <ls_fcat>-qfieldname
2755
of structure <ls_data> to <l_unit>.
2756
endif.
2757 -
Regarding output using alv grid display
Hi experts,
i have a program
FS_TAB1-A = P_T1.
IF P_T1 = 0.
TEMP1 = 1.
DO TEMP1 TIMES.
FS_TAB1-A = P_T1 * DUMMY1.
APPEND FS_TAB1 TO T_TAB1.
DUMMY1 = DUMMY1 + 1.
ENDDO.
now i have to diplay the p_t1*dummy1 using alv grid display like it goes into thew loop for ten times then i have to show it 10 times like
10 1 102 103 104 111 112 like that can u help mehi,
you have to get the result of the multiplication at each row and then concatenate the result and the factor to show the final result in multiples value and multiplication factor... -
hi,
i have two problems in displaying ALV grid output Using Oops.
1) How to modify the fieldcatalog after we getting a field catalog using general FM.
2) initialy it is displaying 13 fields but there are 63 fields .
eventhough we chage the layout to 63 fields it is displaying only 13 fields , these 13 fields may be different based on our selection but count of displayed fileds are same . how can display 63 fields at a time .Hi,
You can chnage using below code:
loop at gt_fieldcat.
if <gt_fieldcat-field_name> = 'FIELDNAME'.
endif.
modify gt_fieldcat.
clear gt_fieldcat.
endloop.
Make sure that all the field should not have no_out = 'X' and tech = 'X'.
Thanks,
Sriram Ponna. -
Want to display more than 300 charcters in a column using ALV grid display
Hi Guru's,
I am trying to display more than 500 charcters in a column using alv grid display but it in the output it is showing only 128 characters. Can you help me to display all the characters in particular column Or is there any limitation in maximum of no of charcters for a column?
Thanks,
Radha.Hi Paurl,
Define a work area say
wa_layout type slis_layout_alv.
then fill this work area as
wa_layout-zebra = X
wa_layout-colwidth_optimize = X.
wa_layout-max_linesize = 300.
Then in FM 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
is_layout = wa_layout
etc.
you provided this for the field which is displayed in alv grid will have more than 128 characters.
from this code i want,how it refers to particular field.
when i mentioned field catalog-OUTPUTLEN = '300'.
it is not displayed the field morethan 128 characters.
it only displays 128 characters.
please provide me clear and breif information with suitable code.
i am trying what your sending but it is not displayed more than 128 characters.
if you don't mind please spend for me some time for this and
give me clear and breif information with suitable code.
Thanks & Regards,
Radhakrishna. -
How to display field of 250 character length using ALV Grid display
Hello Experts,
Currently I'm using 4.6 version.
I got to insert a new field of length 250 characters into an existing ALV grid display.
I passed a value of length 250 chars into the field and assigned it to the itab passing to the fn module
'REUSE_ALV_GRID_DISPLAY'.
But in the ALV display I am able to view only 132 chars only. I increased the line-size of the report also accordingly. But I'm unable to view all the 250 chars.
Kindly help me out in fixing this issue.you just can't do that
I suggest that you put the first characters in cell and allow user to double-click on cell in order to view the full value in a popup window -
Use of I_CALLBACK_USER_COMMAND in ALV grid display
Hi experts,
When i am using the parameter I_CALLBACK_USER_COMMAND in grid display and when i click on BACK button, then the Function code for BACK button is not captured i.e. it does not go in the routine which i have written. But this is not the case with SAVE button. When i click on save button, then it goes in the routine ( i have put a breakpoint in the routine) and also the value of Function code for SAVE button is fetched. Then why is it not working for BACK or CANCEL button??
Thanks in advanceActually my requirement is as follows.
I have develpoed a screen program in which i have a created a button & on the click of this button i call the reuse alv grid display FM which displays in the alv grid format. For this I have used an internal table whose first field is checkbox.( While creating the field catalog itab to be passed to reuse alv grid display i mark the checkbox field as 'X' for the first field.) Now when i display the alv, i need to select certain records. For this i tick mark the necessary records. But then when i click on the back button and come to the previous screen, i am not able to capture these selected records. How do i proceed -
Drill down capabilities for an alv grid display field using oops concept
Hi All,
could anyone help me in how to achieve the drill down capabilities for an alv grid display field using oops concept.
Thanks & Regards,
padmasri.padmasri,
Hope your requirement is something like, when you click on a sales order number it should display that order (VA03), in a grid output displayed using set_table_for_first_display.
you can acheive it using event double click.
*& L O C A L C L A S S E S - D E F I N I T O N *
class lcl_event_receiver: local class to handle event DOUBLE_CLICK
CLASS LCL_EVENT_RECEIVER DEFINITION.
PUBLIC SECTION.
METHODS:
HANDLE_DOUBLE_CLICK
FOR EVENT DOUBLE_CLICK OF CL_GUI_ALV_GRID
IMPORTING E_ROW E_COLUMN.
PRIVATE SECTION.
ENDCLASS. "lcl_event_receiver DEFINITION
*& L O C A L C L A S S E S - I M P L E M E N T A T I O N *
CLASS LCL_EVENT_RECEIVER IMPLEMENTATION.
METHOD HANDLE_DOUBLE_CLICK.
PERFORM HANDLE_DOUBLE_CLICK USING E_ROW
E_COLUMN.
ENDMETHOD. "handle_double_click
ENDCLASS. "lcl_event_receiver IMPLEMENTATION
FORM HANDLE_DOUBLE_CLICK USING E_ROW TYPE LVC_S_ROW
E_COLUMN TYPE LVC_S_COL.
DATA: LS_DETAIL LIKE LINE OF T_OUTPUT.
WHEN 'T_OUTPUT'.
READ TABLE T_OUTPUT INDEX E_ROW-INDEX INTO LS_DETAIL.
If clicked on PO Number or PO Item, call ME23
IF E_COLUMN-FIELDNAME = 'EBELN' OR
E_COLUMN-FIELDNAME = 'EBELP' .
SET PARAMETER ID 'BES' FIELD LS_DETAIL-EBELN.
SET PARAMETER ID 'BSP' FIELD LS_DETAIL-EBELP.
CALL TRANSACTION 'ME23' AND SKIP FIRST SCREEN.
If clicked on sales order number or item, call VA03
ELSEIF E_COLUMN-FIELDNAME = 'VBELN' OR
E_COLUMN-FIELDNAME = 'POSNR'.
SET PARAMETER ID 'AUN' FIELD LS_DETAIL-VBELN.
SET PARAMETER ID 'APO' FIELD LS_DETAIL-POSNR.
CALL TRANSACTION 'VA03' AND SKIP FIRST SCREEN.
Hope this helps -
Row seperator in the ALV grid display after the various highest level prod.
Hi,
I have a requirement like user wants a row seperator against the various high level products (Each parent material)in ALV Grid display.We made this change but quantity and pricey fields showing the zero's in the blank line.i know that if we use NO-ZERO
in the ALV field catalog , we can remove the zero's from blank line. But other zerou2019s will remove from rest of the line items. User want's the zero's in other line items, but not in the blank line.
We can convert packed fileds into character format, but this will effect to the summing the quantity, price coumns.
If any body have idea on above mentioned.
Regards,
SK.Hi Suresh,
There is no short cut for this requirement. You have to do following steps.
1. Change the data type of column to char.
2. Programatically find the totals.
Reagards,
Anversha -
Button in alv grid cell using REUSE_ALV_GRID_DISPLAY
Hi all,
I want to make the contents of 2 columns of my alv grid as push button with values as text on it. I am not using classes or methods but alv grid fm. On clicking the button one dialog box has to pop up which gives edit option for the values in that coloumn, my question is how to introduce button in alv grid cell? if i can use t_fieldcatalog-icon, then please give me the complete steps for that.
Thanks.this may helps u
u need to copy stadard screen elemetn to MARATAB1(at PF -STATUS)
You should copy the 'STANDARD' GUI status from program <b>SAPLSLVC_FULLSCREEN</b>
type this one in SE41 program name is:<b>SAPLSLVC_FULLSCREEN</b>
status : <b>STANDARD_FULLSCREEN</b>
and copy it ...
Type-pool
type-pools slis.
Tables
tables: mara,sscrfields.
Selection screen
select-options: s_matnr for mara-matnr.
PARAMETERS: p_email TYPE somlreci1-receiver.
TYPES: BEGIN OF t_charmara,
matnr(18) TYPE c, " Material Number
ernam(12) TYPE c, " Person Credited
aenam(12) TYPE c, " Person Changed Object
pstat(15) TYPE c, " Maintenance Status
END OF t_charmara.
Data Declarations
data: rt_extab type slis_t_extab, " Table of inactive function
codes
wa_charmara TYPE t_charmara, " work area of mara Table
fs_fieldcat type slis_t_fieldcat_alv,
" Field catalog with field
descriptions
t_fieldcat like line of fs_fieldcat,
" Table of Field catalog
r_ucomm like sy-ucomm, " User Command
rs_selfield TYPE slis_selfield. " cursor position ALV
data: filedlayout type slis_layout_alv,
heading type slis_t_listheader with header line,
t_event type slis_t_event.
data: fs_event like line of t_event.
data: fs_sort type slis_sortinfo_alv,
t_sort type slis_t_sortinfo_alv.
data: w_char(200) type c,
w_matnr type mara-matnr.
fs_sort-fieldname = 'MATNR'.
fs_sort-up = 'X'.
fs_sort-group = '*'.
append fs_sort to t_sort.
clear fS_sort.
DATA: t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
w_cnt TYPE i,
w_sent_all(1) TYPE c,
w_doc_data LIKE sodocchgi1,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
Internal Tables
data: begin of it_mara occurs 0,
matnr like mara-matnr, " Material Number
ernam like mara-ernam, " Person Credited
aenam like mara-aenam, " Person Changed Object
pstat like mara-pstat, " Maintenance Status
end of it_mara.
DATA: it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
WITH HEADER LINE.
*at selection-screen on field event
AT SELECTION-SCREEN on s_matnr.
PERFORM f0100_VALIDATE_MATERIAL_NUMBER.
start-of-selection.
retrive Data from the data base table Mara
perform retrive_data_from_mara.
end-of-selection.
*Field catalog with field descriptions
perform fieldcat.
*perform top_of_page.
PERFORM EVENT_LIST.
*ALV Grid Display
perform alv_display.
Creating one Push button ENTER
perform maratab1 USING RT_EXTAB.
*& Form f0100_VALIDATE_MATERIAL_NUMBER
text
There are no interface parameters to be passed to this subroutine
FORM F0100_VALIDATE_MATERIAL_NUMBER .
select matnr " Material Number
from mara
up to 1 rows
into mara-matnr
where matnr in s_matnr.
endselect.
IF sy-subrc NE 0.
clear sscrfields-ucomm.
MESSAGE e000 WITH 'Enter valid Material number'(003).
ENDIF. " IF sy-subrc NE 0
ENDFORM. " f0100_VALIDATE_MATERIAL_NUMBER
*& Form retrive_data_from_mara
text
*There are no interface parameters to be passed to this subroutine
FORM retrive_data_from_mara .
select matnr " Material Number
ernam " Person Credited
aenam " Person Changed Object
pstat " Maintenance Status
from mara
into table It_mara
where matnr in s_matnr.
IF sy-subrc NE 0.
MESSAGE i001 WITH 'Records are not found'.
exit.
stop.
ENDIF. " IF sy-subrc NE 0
ENDFORM. " retrive_data_from_mara
*& Form fieldcat
text
*There are no interface parameters to be passed to this subroutine
FORM fieldcat .
*field catalog for MATNR
t_FIELDCAT-REF_TABNAME = 'MARA'.
t_fieldcat-fieldname = 'MATNR'.
t_fieldcat-col_pos = 1.
append t_fieldcat to fs_fieldcat.
clear t_fieldcat.
*field catalog for ERNAM
t_FIELDCAT-REF_TABNAME = 'MARA'.
t_fieldcat-fieldname = 'ERNAM'.
t_fieldcat-col_pos = 2.
append t_fieldcat to fs_fieldcat.
clear t_fieldcat.
*field catalog for AENAM
t_FIELDCAT-REF_TABNAME = 'MARA'.
t_fieldcat-fieldname = 'AENAM'.
t_fieldcat-col_pos = 3.
append t_fieldcat to fs_fieldcat.
clear t_fieldcat.
*field catalog for PSTAT
t_FIELDCAT-REF_TABNAME = 'MARA'.
t_fieldcat-fieldname = 'PSTAT'.
t_fieldcat-col_pos = 4.
append t_fieldcat to fs_fieldcat.
clear t_fieldcat.
ENDFORM. " fieldcat
*& Form EVENT_LIST
text
*There are no interface parameters to be passed to this subroutine
FORM EVENT_LIST .
fs_event-name ='TOP_OF_PAGE'.
fs_event-form = 'TOP_PAGE'.
append fs_event TO t_EVENT.
CLEAR FS_EVENT.
fs_event-name ='END_OF_PAGE'.
fs_event-form = 'END_PAGE'.
append fs_event TO t_EVENT.
CLEAR FS_EVENT.
fs_event-name ='END_OF_LIST'.
fs_event-form = 'LIST_END'.
append fs_event TO t_EVENT.
CLEAR FS_EVENT.
ENDFORM. " EVENT_LIST
*& Form alv_display
text
*There are no interface parameters to be passed to this subroutine
FORM alv_display .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = 'MARATAB1'
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_STRUCTURE_NAME =
IS_LAYOUT =
IT_FIELDCAT = FS_FIELDCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT = T_SORT
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS = T_EVENT
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IR_SALV_LIST_ADAPTER =
IT_EXCEPT_QINFO =
I_SUPPRESS_EMPTY_DATA = ABAP_FALSE
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_MARA[]
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " alv_display
form TOP_PAGE.
data:tbl_listheader type slis_t_listheader,
wa_listheader type slis_listheader .
wa_listheader-typ = 'S'.
wa_listheader-info = 'Created by : Vijay Pawar'.
append wa_listheader to tbl_listheader.
wa_listheader-typ = 'S'.
concatenate ' Date ' sy-datum into
wa_listheader-info separated by space.
append wa_listheader to tbl_listheader.
wa_listheader-typ = 'S'.
concatenate ' From ' s_matnr-low ' To ' s_matnr-high into
wa_listheader-info separated by space.
append wa_listheader to tbl_listheader.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = tbl_listheader
I_LOGO =
I_END_OF_LIST_GRID =
I_ALV_FORM =
endform. " form TOP_PAGE.
form END_PAGE.
STATICS W_PAGE TYPE I .
data:tbl_listheader type slis_t_listheader,
wa_listheader type slis_listheader .
wa_listheader-typ = 'S'.
wa_listheader-info = W_PAGE.
append wa_listheader to tbl_listheader.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = tbl_listheader
I_LOGO =
I_END_OF_LIST_GRID =
I_ALV_FORM =
add 1 to w_page.
endform. " form END_PAGE.
form list_end.
data:tbl_listheader type slis_t_listheader,
wa_listheader type slis_listheader .
wa_listheader-typ = 'S'.
wa_listheader-info = '......................................Last Page'
append wa_listheader to tbl_listheader.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = tbl_listheader
I_LOGO =
I_END_OF_LIST_GRID =
I_ALV_FORM =
endform. " form list_end.
*& Form maratab1
text
-->P_RT_EXTAB text
FORM maratab1 USING P_RT_EXTAB.
SET PF-STATUS 'MARATAB1' EXCLUDING rt_extab.
ENDFORM. " maratab1
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
case r_ucomm.
when 'ENTER'.
perform bulid_xls_data_table.
PERFORM send_file_as_email_attachment
tables it_message
it_attach
using p_email "'[email protected]'
'Example .xls documnet attachment'
'XLS'
'filename'
changing gd_error
gd_reciever.
perform populate_email_message_body.
PERFORM initiate_mail_execute_program.
endcase. " case r_ucomm.
endform. " FORM user_command
perform populate_email_message_body.
PERFORM initiate_mail_execute_program.
CALL FUNCTION 'RH_START_EXCEL_WITH_DATA'
EXPORTING
DATA_FILENAME = 'MARA.XLS'
DATA_PATH_FLAG = 'W'
DATA_ENVIRONMENT =
DATA_TABLE = ITAB[]
MACRO_FILENAME =
MACRO_PATH_FLAG = 'E'
MACRO_ENVIRONMENT =
WAIT = 'X'
DELETE_FILE = 'X'
EXCEPTIONS
NO_BATCH = 1
EXCEL_NOT_INSTALLED = 2
INTERNAL_ERROR = 3
CANCELLED = 4
DOWNLOAD_ERROR = 5
NO_AUTHORITY = 6
FILE_NOT_DELETED = 7
OTHERS = 8
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
leave to list-processing.
endcase.
*& Form bulid_xls_data_table
text
*There are no interface parameters to be passed to this subroutine
FORM bulid_xls_data_table .
CONSTANTS: con_cret TYPE x VALUE '0D', "OK for non Unicode
con_tab TYPE x VALUE '09'. "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
constants:
con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
con_cret type c value cl_abap_char_utilities=>CR_LF.
CONCATENATE 'matnr' 'ernam' 'aenam' 'pstat'
INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
LOOP AT It_mara INTO wa_charmara.
CONCATENATE wa_charmara-matnr wa_charmara-ernam
wa_charmara-aenam wa_charmara-pstat
INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
ENDLOOP. " LOOP AT it_mara INTO...
ENDFORM. " bulid_xls_data_table
*& Form send_file_as_email_attachment
Send email
-->P_IT_MESSAGE text
-->P_IT_ATTACH text
-->P_P_EMAIL text
-->P_0387 text
-->P_0388 text
-->P_0389 text
-->P_0390 text
-->P_0391 text
-->P_0392 text
<--P_GD_ERROR text
<--P_GD_RECIEVER text
FORM send_file_as_email_attachment tables pit_message
pit_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = pit_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM. " send_file_as_email_attachment
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
Instructs mail send program for SAPCONNECT to send email.
FORM initiate_mail_execute_program.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDFORM. " INITIATE_MAIL_EXECUTE_PROGRAM
*& Form POPULATE_EMAIL_MESSAGE_BODY
Populate message body text
form populate_email_message_body.
REFRESH it_message.
it_message = 'Please find attached a list test mara records'.
APPEND it_message.
endform. "form populate_email_message_bod
rewards if it helps u
Maybe you are looking for
-
Is it possible to upgrade the graphics card on a macbook??
I know macs aren't meant for gaming or anything, but I just wanted to know if a graphics card upgrade is possible.
-
Apple TV loses synched Photos after iTunes restarts
Everytime I restart my iTunes Server ( Mac mini with iTunes program- attached external drive with iTunes content) all my synched photos on Apple TV are gone and I have to synch again. Happened also before Apple TV 3.0. Why?
-
Hi All, I want to know the S.T.O(Intra company) billing, not profarma invoice.It should hit the G/Ls.( I am not asking about the Inter company plz). When I am doing the invoice with respect to the delivery no(VL02N) system is giving an error messa
-
Javascript in 'Execute when page loads', not working when paging results grid
I have some Javascript in an Apex page, running in 'Execute when page loads'. It does some stuff to a results grid. It works fine on page load, but then doesn't run when I page through, or sort the grid. I presume this is because the grid is being so
-
I can not Sync the Entourage Calendar with my Ipod
Hi, I have a MacBook Pro, I have a Ipod phone I am trying to sync my contacs and Calendar, just my contacts works fine but it does not sync my calendar, I am using a Entourage 2004, it sync with the calendar that the Macbook has by default any body k