Sum of a field in ALV List

Hello Guys,
I'm using 'REUSE_ALV_GRID_DISPLAY' in my prog.
There is a field in output table which is of type P(8) Decimals 3.
When I'm trying to get the sum of this field in ALV Display it gives the message " Desired operation cannot be performed for column 'Converted Quantity' ".
I have also tried do_sum = 'X'.
But it is not working. Please help guys.
Regards,
Abhinav

Thanks a lot guys for your inputs.
The program is working now.
Now I'm using :
  CLEAR wa_fieldcat.
  wa_fieldcat-fieldname = 'QUAN'.
*  wa_fieldcat-ref_tabname = 'I_OUT2'.
*  wa_fieldcat-tabname = 'I_OUT2'.
  wa_fieldcat-qfieldname = 'MEAS'.
  wa_fieldcat-qtabname = 'I_OUT2'.
  wa_fieldcat-outputlen = '15'.
  wa_fieldcat-seltext_l = text-052.
  APPEND wa_fieldcat TO i_fieldcat.
The program is working fine now.
I have commented tabname and -ref_tabname , and the program is working fine now.
Thanks a lot.

Similar Messages

  • Hi all   F4 on field in alv list

    hi all
    i would like to know how is it possible to give f4 help to a field in alv list.  this is field is input enable.
    if not in alv list, is it possible in alv grid.
    thanx
    rocky

    HI
    like this
    TYPES : BEGIN OF ST_OBJID_SH,
             OTYPE TYPE HRP1000-OTYPE,
             OBJID TYPE HRP1000-OBJID,
            END OF ST_OBJID_SH.
    DATA : IT_OBJID_SH TYPE STANDARD TABLE OF ST_OBJID_SH.
    DATA : WA_OBJID_SH TYPE ST_OBJID_SH.
    ***********SELECTION SCREEN DESIGN***********************
    SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
    *SELECT-OPTIONS : S_OTYPE FOR HRP1001-OTYPE NO INTERVALS .
    SELECT-OPTIONS : S_OBJID FOR HRP1001-OBJID NO INTERVALS .
    SELECT-OPTIONS : DATE FOR SY-DATUM NO-EXTENSION OBLIGATORY.
    SELECTION-SCREEN END OF BLOCK B1.
    **********END OF SELECTION SCREEN DESIGN*****************
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_OBJID-LOW.
    IF S_OBJID IS NOT INITIAL.
        SELECT OTYPE OBJID FROM HRP1000
                     INTO TABLE IT_OBJID_SH
                     WHERE OTYPE = 'D'.
    IF SY-SUBRC EQ 0.
    SEARCH HELP FOR QUALIFICATION.
        CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
          EXPORTING
                 DDIC_STRUCTURE         = ' '
            RETFIELD               =  'OBJID'
                 PVALKEY                = ' '
           DYNPPROG               = SY-REPID
           DYNPNR                 = SY-DYNNR
           DYNPROFIELD            = 'S_OBJID'
                 STEPL                  = 0
                 WINDOW_TITLE           =
                 VALUE                  = ' '
           VALUE_ORG              = 'S'
                 MULTIPLE_CHOICE        = ' '
                 DISPLAY                = ' '
                 CALLBACK_PROGRAM       = ' '
                 CALLBACK_FORM          = ' '
                 MARK_TAB               =
               IMPORTING
                 USER_RESET             =
          TABLES
            VALUE_TAB              =  IT_OBJID_SH
                 FIELD_TAB              =
                 RETURN_TAB             = RETURN_TAB
                 DYNPFLD_MAPPING        =
               EXCEPTIONS
                 PARAMETER_ERROR        = 1
                 NO_VALUES_FOUND        = 2
                 OTHERS                 = 3
        IF SY-SUBRC <> 0.
              MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                      WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
      ENDIF.

  • Editable field in alv list display

    i WANT TO GIVE COLOR FOR EDITABLE FIELD IN ALV LIST DISPLAY.i TRIED WITH EMPHASIZE IN FIELD CATALOGUE ASSIGNING.bUT,IT IS NOT WORKING.HOW TO DO.tHANX IN ADVANCE.........

    HI,
    Please refer the link below:
    http://www.****************/Tutorials/ALV/Edit/demo.htm
    http://www.****************/Tutorials/ALV/ColorSALV/Demo.htm
    Thanks,
    Sriram Ponna.

  • EDIT FIELD IN ALV LIST

    HI,
    WA_FIELDCAT-COL_POS = 4.
      WA_FIELDCAT-TABNAME = 'GT_OUT'.
      WA_FIELDCAT-FIELDNAME = 'DATAINS2'.
      WA_FIELDCAT-SELTEXT_M = 'POD'.
      WA_FIELDCAT-EDIT = 'X'.
      APPEND WA_FIELDCAT TO I_FIELDCAT.
      CLEAR WA_FIELDCAT.
    WA_FIELDCAT-EDIT = 'X'.
    I USED THIS ONE BUT IAM GETTING SYNERROR  WA_FIELDCAT DONT HAVE THIS COMPONENT.

    Refer to this related thread
    Re: how to edit particular field in alv list display-urgent

  • I cannot dowload all fields from ALV list to Excel - urgent, please help me

    I developed a report and displayed in ALV list using FM 'REUSE_ALV_GRID_DISPLAY'.The list contains 200 fields.But when i am trying to download in EXCEL file from ALV list, it is unable to download all the fields from ALV list into EXCEL.
    Thanks in advance,
    Katta.

    is your list having packed decimals or any fields which are of large length (around 128 char)?
    It can happen so.

  • Dump when summing up CURR field in ALV GRID display

    Hi All,
    I am getting dump when I try to sum the CURR field in my ALV Grid Display. The field is of CURR 23.  I am using classes and methods to display alv grid.
    I tried passing <fs_fieldcat>-do_sum = 'X'. When I did this, it is dumping without even displaying the alv grid.
    Here is the part it is throwing dump:
            ls_lvc_data-value = space.
            clear ls_lvc_data-style.
            loop at it_fcat_local assigning <ls_fcat>
                    where tech ne 'X' and no_out ne 'X'.
              if l_invisible eq 'X'.
                clear l_invisible.
                if <ls_fcat>-do_sum is initial.
                  continue.
                else.
                  clear ls_lvc_data-col_pos.
                endif.
              endif.
              add 1 to ls_lvc_data-col_pos.
              assign component <ls_fcat>-fieldname
                               of structure <ls_data> to <l_field_value>.
              _if sy-subrc ne 0.
                message x000(0k).
              endif._
    Regards,
    Guru

    Thomas,
    Here is the dump:
    Runtime Errors         MESSAGE_TYPE_X
    Date and Time          10/22/2010 23:30:53
    Short text
    The current application triggered a termination with a short dump.
    What happened?
    The current application program detected a situation which really
    should not occur. Therefore, a termination with a short dump was
    triggered on purpose by the key word MESSAGE (type X).
    Error analysis
    Short text of error message:
    Long text of error message:
    Technical information about the message:
    Message class....... "0K"
    Number.............. 000
    Variable 1.......... " "
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
    How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "MESSAGE_TYPE_X" " "
    "SAPLSLVC" or "LSLVCF36"
    "FILL_DATA_TABLE"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
    To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
    Display the system log by calling transaction SM21.
    Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
    In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
    Source Code Extract
    Line
    SourceCde
    2708
    is_subtottxt_info = ls_subtot_info
    2709
    ip_subtot_line    = lr_data
    2710
    changing
    2711
    c_subtottxt       = l_subtottxt.
    2712
    ls_lvc_data-value = l_subtottxt.
    2713
    2714
    append ls_lvc_data to ct_lvc_data.
    2715
    endif.
    2716
    2717
    2718
    Column per Fieldcat Entry
    2719
    2720
    ls_lvc_data-value = space.
    2721
    clear ls_lvc_data-style.
    2722
    loop at it_fcat_local assigning <ls_fcat>
    2723
    where tech ne 'X' and no_out ne 'X'.
    2724
    if l_invisible eq 'X'.
    2725
    clear l_invisible.
    2726
    if <ls_fcat>-do_sum is initial.
    2727
    continue.
    2728
    else.
    2729
    clear ls_lvc_data-col_pos.
    2730
    endif.
    2731
    endif.
    2732
    2733
    add 1 to ls_lvc_data-col_pos.
    2734
    2735
    assign component <ls_fcat>-fieldname
    2736
    of structure <ls_data> to <l_field_value>.
    2737
    if sy-subrc ne 0.
    >>>>>
    message x000(0k).
    2739
    endif.
    2740
    2741
    *... work on average
    2742
    if <ls_fcat>-do_sum eq 'C'.
    2743
              Initialize average result and entries
    2744
    <l_field_value> = 0.
    2745
    clear l_entries.
    2746
    2747
              retrive unit from fieldcatalog
    2748
    assign space to <l_unit>.
    2749
    if not <ls_fcat>-cfieldname is initial.
    2750
    assign component <ls_fcat>-cfieldname
    2751
    of structure <ls_data> to <l_unit>.
    2752
    endif.
    2753
    if not <ls_fcat>-qfieldname is initial.
    2754
    assign component <ls_fcat>-qfieldname
    2755
    of structure <ls_data> to <l_unit>.
    2756
    endif.
    2757

  • SUM for a field in ALV

    Hello Guys,
    CAn any one tell me how to do the SUM for a particular column in ALV.It should display at the End of the records.The column field is TYPE N(4).
    My CODE is like this:
    CLEAR fc_tmp.
      fc_tmp-col_pos         =  5.
      fc_tmp-reptext_ddic    = 'POINTS'.
      fc_tmp-fieldname       = 'POINTS'.
      fc_tmp-tabname         = 'ITAB'.
      fc_tmp-outputlen       = 15.
      fc_tmp-key             = 'X'.
      fc_tmp-do_sum          = 'X'.
      APPEND fc_tmp TO fieldcat.
    This is not working.
    Thanks in Advance,
    Take care

    Hi,
    populate the IT_SORT internal table of REUSE_ALV_GRID_DISPLAY provided in the importing parameters.
    fieldname = Company Code
    append fieldname to it_sort.
    fieldname = division.
    append fieldname to it_sort.
    If you explicitly need subtotals then add the following line
    subtot = 'X'
    For obtaining sum you have an attribute "do_sum" in fieldcatalog , set it to 'X' and you should be able to do sum on that field.
    <b>Ensure that these should be numeric / currency or quantity datatypes only.</b>
    wa_fieldcat-datatype = 'CURR'.   or
    wa_fieldcat-datatype = 'QUAN'.
    Hope this solves your problem
    Cheers,
    Simha.
    PS : Please reward points if solution is helpful

  • How to edit particular field in alv list display-urgent

    HI ALL,
    my requirement is i am displaying output using alv list display. now my rewuirement :
    i am displaying out in edit mode only. when user clicks one particular field
    for example record is like
    runrate a01 maheed  -> if user clicks on a01 this field should be editable. i have a following code
      w_field-edit = w_edit.
      w_field-input = 'X'.    -> using this code i can able to display entire colomn in edit mode. this not suits my requirement.anybody can send me the sample code please.
    thanks,
    maheedhar.t

    Can you please send me the sample code plz.
    i am sending my code below.
    type-pools : slis.
    tables : zuser_secobjects.
    data : t_header1 like zuser_secobjects.
    data : begin of it_secobjects occurs 0.
            include structure t_header1.
    data :   checkbox type c value 'X',
            action type c,
          end of it_secobjects.
    data : begin of it_secobjects1 occurs 0.
            include structure ZUSER_SECOBJECTS.
    data :   checkbox type c VALUE 'X',
          end of it_secobjects1.
    data : wa_ita like line of it_secobjects.
    data : i_field type slis_t_fieldcat_alv with header line.
    data : w_field like line of i_field.
    data : i_sort type slis_t_sortinfo_alv.
    data : w_sort like line of i_sort.
    data : it_filt1 type slis_t_filter_alv with header line.
    data:
    i_tabname type tabname,
    i_repid like sy-repid,
    is_lout type slis_layout_alv.
    data :   it_filt type slis_t_filter_alv   with header line,
             it_evts type slis_t_event        with header line.
    DATA : is_vari type disvariant.
    constants :   c_default_vari value 'X',
                  c_save_vari    value 'U',
                   c_checkfield type slis_fieldname     value 'ACTION',
                   c_f2code     type sy-ucomm           value '&ETA'.
    data : chk_box type slis_fieldname.
    selection-screen: begin of block b1 with frame title text-t01.
    parameters : p_appln type zuser_secobjects-appln.
    parameters : p_user type usr02-bname, "zuser_secobjects-appln_user,
    p_partnr type zuser_secobjects-appln_partner,
    p_ptype type zuser_secobjects-partner_type default '02',
    p_upostn type zuser_secobjects-user_position,
    p_sdate like likp-erdat default sy-datum,
    p_edate(10) default '12/31/9999',
    p_revnum type zuser_secobjects-revnum,
    p_cted type zuser_secobjects-created_by,
    p_cdate type zuser_secobjects-creation_date,
    p_ctime type zuser_secobjects-creation_time,
    p_chnby type zuser_secobjects-changed_by,
    p_cdate1 type zuser_secobjects-changed_date,
    p_ctime1 type zuser_secobjects-changed_time.
    selection-screen: end of block b1.
    form user_command using p_ucomm like sy-ucomm
    rs_selfield type slis_selfield.
      case p_ucomm.
        when 'SELECT_ALL'. " SELALL is the FCODE of ur push button
          loop at it_secobjects into wa_ita.
            wa_ita-checkbox = 'X'.
            modify it_secobjects from wa_ita.
          endloop.
      rs_selfield-refresh = 'X'.   "<-  ADD THIS
      when 'DESLCT_ALL'.
        loop at it_secobjects into wa_ita.
            wa_ita-checkbox = ' '.
            modify it_secobjects from wa_ita.
          endloop.
    rs_selfield-refresh = 'X'.   "<-  ADD THIS
       is_lout-f2code               = c_f2code.
       is_lout-box_fieldname        = c_checkfield.
       is_lout-get_selinfos         = 'X'.
       is_lout-detail_popup         = 'X'.
       is_lout-detail_initial_lines = 'X'.
    maheed-start.
    *when 'SAVE'.
    *LOOP AT IT_SECOBJECTS WHERE CHECKBOX = 'X'.
    MOVE-CORRESPONDING IT_SECOBJECTS TO IT_SECOBJECTS1.
    APPEND IT_SECOBJECTS1.
    CLEAR IT_SECOBJECTS1.
    DELETE IT_SECOBJECTS.
    *ENDLOOP.
    *DELETE ZUSER_SECOBJECTS FROM TABLE IT_SECOBJECTS1.
    WHEN 'DELETE'.
        loop at it_SECOBJECTS where checkbox eq 'X'.
            delete it_SECOBJECTS.
        endloop.
    *RS_SELFIELD-REFRESH = 'X'.
    maheed-end.
    maheed-start.  apr 13
    WHEN 'DELETE'.
    loop at it_SECOBJECTS where checkbox eq 'X'.
    MOVE-CORRESPONDING IT_SECOBJECTS TO IT_SECOBJECTS1.
    APPEND IT_SECOBJECTS1.
    delete it_SECOBJECTS.
    endloop.
    RS_SELFIELD-REFRESH = 'X'.
    when 'SAVE'.
    DELETE ZUSER_SECOBJECTS FROM TABLE IT_SECOBJECTS1.
    commit work.
    refresh :IT_SECOBJECTS1.
    maheed-end.    apr 13
    *when 'SAVE'.
    *LOOP AT IT_SECOBJECTS WHERE CHECKBOX = 'X'.
    MOVE-CORRESPONDING IT_SECOBJECTS TO IT_SECOBJECTS1.
    APPEND IT_SECOBJECTS1.
    CLEAR IT_SECOBJECTS1.
    DELETE IT_SECOBJECTS.
    *ENDLOOP.
    *DELETE ZUSER_SECOBJECTS FROM TABLE IT_SECOBJECTS1.
    ENDCASE.
    endform.
    *&      Form  delete
    form delete.
      data : begin of is_secobjects occurs 0.
              include structure zuser_secobjects.
      data : checkbox type c.
      data : end of is_secobjects.
      is_secobjects-checkbox = 'X'.
      modify is_secobjects
        from it_secobjects
        transporting checkbox
      where checkbox = 'X'.
    endform.
    *&      Form  get_data
    form get_data.
      select * from zuser_secobjects
      into table it_secobjects.
    endform.                    " get_data
    *&      Form  prepare_fieldcatalog
          text
    -->  p1        text
    <--  p2        text
    form prepare_fieldcatalog." USING w_edit TYPE any.
    data : w_edit type c.
    clear w_edit.
      clear: w_field,i_field.
      refresh:i_field.
      i_field-key = 'X'.
      i_field-col_pos = 1.
      i_field-ddictxt = 'S'.
      i_field-seltext_s = '@11@'.
    i_field-checkbox = 'X'.
      i_field-input = 'X'.
      i_field-fieldname = 'HEADER'.
      i_field-outputlen = 0.
      append i_field.
      clear i_field.
      w_field-fieldname = 'APPLN'.
      w_field-tabname = 'IT_SECOBJECTS'.
      w_field-seltext_l = text-m01.
      w_field-outputlen = '10'.
      w_field-EDIT = 'X'.      "maheed
      w_field-col_pos = 1.
      append w_field to i_field.
      clear w_field.
      w_field-fieldname = 'APPLN_USER'.
      w_field-tabname = 'IT_SECOBJECTS'.
      w_field-just = 'C'.
      w_field-seltext_l = text-m02.
      w_field-outputlen = '7'.
      w_field-col_pos = 2.
      append w_field to i_field.
      clear w_field.
      w_field-fieldname = 'APPLN_PARTNER'.
      w_field-tabname = 'IT_SECOBJECTS'.
      w_field-just = 'C'.
      w_field-seltext_l = text-m03.
      w_field-edit = w_edit.
      w_field-input = 'X'.
      w_field-outputlen = '7'.
      w_field-col_pos = 2.
      append w_field to i_field.
      clear w_field.
      w_field-fieldname = 'INACTIVE'.
      w_field-tabname = 'IT_SECOBJECTS'.
      w_field-just = 'C'.
      w_field-seltext_l = text-m02.
      w_field-outputlen = '7'.
      w_field-col_pos = 3.
      append w_field to i_field.
      clear w_field.
    endform.                    " prepare_fieldcatalog
    *&      Form  ALV_LIST_DISPLAY
          text
    -->  p1        text
    <--  p2        text
    form alv_list_display.
    DATA : LC_GLAY TYPE LVC_S_GLAY.
    LC_GLAY-EDT_CLL_CB = 'X'.
      i_repid = sy-repid.
      is_lout-box_fieldname = 'CHECKBOX'.
      it_filt-fieldname = 'ACTION'.
      call function 'REUSE_ALV_LIST_DISPLAY'
           exporting
                i_callback_program       = i_repid
                i_callback_pf_status_set = 'PF_STATUS_SET'
                i_callback_user_command  = 'USER_COMMAND'
                is_layout                = is_lout
                it_fieldcat              = i_field[]
                it_filter                = it_filt[]
                 it_events                = it_evts[]
                i_default                = c_default_vari
                i_save                   = c_save_vari
                is_variant               = is_vari
           tables
                t_outtab                 = it_secobjects.
    endform.                    " ALV_LIST_DISPLAY
    *&      Form  display
          text
         -->P_I_OBJECT  text
    form display using    object.
      case object.
    ENDCASE.
    endform.                    " display
    thanks,
    maheedhar.t

  • Time field in alv list

    Hi all ,
    i want to display alv list with time field . if no data exists in that field its showing 00:00:00 , i have to show it blank. if i change time field as type c in my internal table its showing like this 121314, i need to display it 12:13:14 . if no data it should display balnk . can any one help me out to reslove this issue?

    Hi priya,
    do this:
    declare in your itab a field like sy-uzeit.
    as example.
    move sy-uzeit to itab-uzeit.
    In fieldcat do this:
        MOVE  'X'                        TO   WA_FIELDCAT-NO_ZERO.
    Hope it helps.
    regards, Dieter

  • How to edit particular field in alv list display

    hi,
    i am displaying output using alv list display. my as follows.
    runrate maheed  a01.
    here if i click a01  it has to show iin edit mode earlier it has to show display mode only. when i select by that time it has to show edit mode there i will change into a02 and i will click save button this is my requirement.
    anybody can send me the sample code please.
    thanks,
    maheedhar.t

    following is my field cata log
      w_field-fieldname = 'APPLN'.
      w_field-tabname = 'IT_SECOBJECTS'.
      w_field-seltext_l = text-m01.
      w_field-outputlen = '10'.
      w_field-col_pos = 1.
      append w_field to i_field.
      clear w_field.
    now i am writng like this
      w_field-fieldname = 'APPLN'.
      w_field-tabname = 'IT_SECOBJECTS'.
      w_field-seltext_l = text-m01.
      w_field-EDIT = 'X'.      "maheed
      w_field-outputlen = '10'.
      w_field-col_pos = 1.
      append w_field to i_field.
      clear w_field.
    eventhough it is not allowing me to edit the field when i click that field in the output.
    thanks,
    maheedhar.t

  • Finding sum for time field in alv

    hi gurus.,
              i need to find total hours.. i am using field of data type 'TIMS' ... i converted the value to decimal in ALV and founfd total hours .. i need the total hours in Time format .. how can i achieve this in alv .. its very urgent ...
    thanks&regards.,
    S.Sivakumar

    Hi Shivakumar,
    I suggest you not to convert TIMS to Decimal
    because it won't give you correct result..
    Eg...
    Time1 = '11:56:32'
    Time2 = '11:50:10'        
    now add these two times...
    u will get the sum of these as 23:06:42
    but in real life... you want the result as 23:46:42
    So the better way for getting accurate result is to convert this
    HH:MM:SS to Seconds
    and then sum these seconds
    then again convert it to HH:MM:SS
    1 hr = 3600 sec
    1 min = 60 sec
    Hope it will solve your problem...
    Reward points if useful...
    Thanks & Regards
    ilesh 24x7

  • How can we sum for the field on alv grid

    Dear Freinds,
                   I am having the field count .....in the ouput (iam using alv grid) .......which dispalys  the id's which are identical .
    i have scneario similar to the below in my ALV Output
    ID                count         total
    4000              3              100
                                          100
                                         200       Can i get count 3 also along with 200 in alv?
    i am using the code as follows for count can any one please let me know.
    my earlier question which i put was confusing.........so i am givin the qustion again
      clear ls_fieldcat.
      ls_fieldcat-col_pos      = 1.
      ls_fieldcat-fieldname    = 'ORGUNIT'.
      ls_fieldcat-seltext_l    =  text-015.  "'Orgunit'.
      ls_fieldcat-key          = 'X'.
      ls_fieldcat-key_sel      = 'X'.
    ls_fieldcat-no_out       = 'X'.
      append ls_fieldcat to fp_i_fieldcat.
      clear ls_fieldcat.
      ls_fieldcat-col_pos      = 2.
      ls_fieldcat-fieldname    = 'COUNT'.
      ls_fieldcat-seltext_l    = 'H.Count'.
      ls_fieldcat-outputlen    = 4.
      ls_fieldcat-do_sum       = 'X'.
    ls_fieldcat-datatype    = 'NUMC'.
      append ls_fieldcat to fp_i_fieldcat.
      clear ls_fieldcat.
      ls_fieldcat-fieldname   = 'TOTAL'.
      ls_fieldcat-seltext_m   = 'total'.
      ls_fieldcat-col_pos     = 3.
      ls_fieldcat-outputlen   = 17.
      ls_fieldcat-do_sum      = 'X'.
      ls_fieldcat-datatype    = 'CURR'.
      append ls_fieldcat to fp_i_fieldcat.
    Please let me know how can do if so what is the parameter i have to change for COUNT
    regards
    syamal

    Hi Shamala Kiran.
                          My name is also kiran.I have a develop a code for u.Actually i cant understand your code.But i know ur problem .Plz check that code.In that code i develop a subtotals and grandttotal.Plz observe the FORM "FIELD CATALOG" in that observe the NETWR FIELD and observe the FORM SORTCATALOG then ur problem will be solved.
    Copy the the below code and execute that code and the result.
    If u r Satisfied with the answer plz give the REWARD POINTS.
    CODE:
    Type Pools
    TYPE-POOLS:slis.
    Tables
    TABLES: vbak,vbap.
    Global Variable
    data: w_var type i.
    Global Data
    DATA:it_fieldcat TYPE slis_t_fieldcat_alv,
         wa_fieldcat TYPE slis_fieldcat_alv,
         it_sortcat TYPE slis_t_sortinfo_alv,
         wa_sortcat  LIKE LINE OF it_sortcat.
    Internal Table
    data: BEGIN OF it_salesorder OCCURS 0,
            vbeln LIKE vbak-vbeln,    " Sales Document Number
            posnr like vbap-posnr,    " Sales Doc Item
            netwr like vbap-netwr,    " Net Value
          END OF it_salesorder.
    SELECT OPTIONS
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
    SELECT-OPTIONS: s_vbeln FOR vbak-vbeln.   " Sales Document Number.
    SELECTION-SCREEN END OF BLOCK b1.
    Initialization
    INITIALIZATION.
      PERFORM initialization.
    *&      Form  initialization
          text
    -->  p1        text
    <--  p2        text
    form initialization .
      s_vbeln-sign   = 'I'.
      s_vbeln-option = 'BT'.
      s_vbeln-low    = '4969'.
      s_vbeln-high   = '5000'.
      APPEND s_vbeln.
    endform.                    " initialization
    Start Of Selection
    START-OF-SELECTION.
      PERFORM field_catalog.   "For Structure Creation
      PERFORM fetch_data.      "Get the Data From DB Table
      PERFORM sorting USING it_sortcat.
    End Of Selection
    END-OF-SELECTION.
      perform display_data.
    *&      Form  field_catalog
          text
    -->  p1        text
    <--  p2        text
    form field_catalog .
      wa_fieldcat-col_pos       = w_var.          " Column Position Variable
      wa_fieldcat-tabname       = 'IT_SALESORDER'. " Internal Table Name
      wa_fieldcat-fieldname     = 'VBELN'.         " Field Name
      wa_fieldcat-key           = 'X'.             " Blue Color
      wa_fieldcat-ref_tabname   = 'VBAK'.          " Table Name
      wa_fieldcat-ref_fieldname = 'VBELN'.         " Field Name
      wa_fieldcat-seltext_m     = 'Sales Doc No'.  " Display Text In Screen
      APPEND wa_fieldcat TO it_fieldcat.
      CLEAR wa_fieldcat.
      ADD 1 TO w_var.
      wa_fieldcat-col_pos       = w_var.          " Column Position Variable
      wa_fieldcat-tabname       = 'IT_SALESORDER'. " Internal Table Name
      wa_fieldcat-fieldname     = 'POSNR'.         " Field Name
      wa_fieldcat-ref_tabname   = 'VBAP'.          " Table Name
      wa_fieldcat-ref_fieldname = 'POSNR'.         " Field Name
      wa_fieldcat-seltext_m     = 'Sales Doc Item'. " Display Text In Screen
      APPEND wa_fieldcat TO it_fieldcat.
      CLEAR wa_fieldcat.
      ADD 1 TO w_var.
      wa_fieldcat-col_pos       = w_var.          " Column Position Variable
      wa_fieldcat-tabname       = 'IT_SALESORDER'. " Internal Table Name
      wa_fieldcat-fieldname     = 'NETWR'.         " Field Name
      wa_fieldcat-ref_tabname   = 'VBAP'.          " Table Name
      wa_fieldcat-ref_fieldname = 'NETWR'.         " Field Name
      wa_fieldcat-do_sum        = 'X'.             " Sum
      wa_fieldcat-seltext_m     = 'Net Value'.  " Display Text In Screen
      APPEND wa_fieldcat TO it_fieldcat.
      CLEAR wa_fieldcat.
      ADD 1 TO w_var.
    endform.                    " field_catalog
    *&      Form  sorting
          text
         -->P_IT_SORTCAT  text
    form sorting using p_it_sortcat TYPE slis_t_sortinfo_alv.
      wa_sortcat-fieldname = 'VBELN'.
      wa_sortcat-up        ='X'.
      wa_sortcat-subtot    = 'X'.
      APPEND wa_sortcat TO p_it_sortcat.
    endform.                    " sorting
    *&      Form  display_data
          text
    -->  p1        text
    <--  p2        text
    form display_data .
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      I_INTERFACE_CHECK                 = ' '
      I_BYPASSING_BUFFER                = ' '
      I_BUFFER_ACTIVE                   = ' '
        I_CALLBACK_PROGRAM                = SY-REPID
      I_CALLBACK_PF_STATUS_SET          = ' '
      I_CALLBACK_USER_COMMAND           = ' '
      I_CALLBACK_TOP_OF_PAGE            = ' '
      I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
      I_CALLBACK_HTML_END_OF_LIST       = ' '
      I_STRUCTURE_NAME                  =
      I_BACKGROUND_ID                   = ' '
      I_GRID_TITLE                      =
      I_GRID_SETTINGS                   =
      IS_LAYOUT                         =
        IT_FIELDCAT                       = it_fieldcat
      IT_EXCLUDING                      =
      IT_SPECIAL_GROUPS                 =
        IT_SORT                           = it_sortcat
      IT_FILTER                         =
      IS_SEL_HIDE                       =
      I_DEFAULT                         = 'X'
      I_SAVE                            = ' '
      IS_VARIANT                        =
      IT_EVENTS                         =
      IT_EVENT_EXIT                     =
      IS_PRINT                          =
      IS_REPREP_ID                      =
      I_SCREEN_START_COLUMN             = 0
      I_SCREEN_START_LINE               = 0
      I_SCREEN_END_COLUMN               = 0
      I_SCREEN_END_LINE                 = 0
      IT_ALV_GRAPHICS                   =
      IT_HYPERLINK                      =
      IT_ADD_FIELDCAT                   =
      IT_EXCEPT_QINFO                   =
      I_HTML_HEIGHT_TOP                 =
      I_HTML_HEIGHT_END                 =
    IMPORTING
      E_EXIT_CAUSED_BY_CALLER           =
      ES_EXIT_CAUSED_BY_USER            =
      TABLES
        t_outtab                          = it_salesorder
    EXCEPTIONS
       PROGRAM_ERROR                     = 1
       OTHERS                            = 2
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    endform.                    " display_data
    *&      Form  fetch_data
          text
    -->  p1        text
    <--  p2        text
    form fetch_data .
    select a~vbeln
           posnr
           b~netwr
      from vbak as a
    inner join vbap as b on  avbeln = bvbeln
      into table it_salesorder
      where a~vbeln in s_vbeln.
    endform.                    " fetch_data

  • How to save the edited fields in ALV list

    Hi
    hope you could help me find a solution, I made my fields editable in ALV grid display as you can see in the code ZID_NUM, ZLAST_NAME and ZMIDDLE_NAME is editable..
    an example scenario would be if I execute the program it will show me 5 lines, all the fields can be edited by the user...(example he edited all data in the result).  When he press save, it will automatically update the ztable (ZMEMPLIST in this case). How do you go about the saving?
    thanks!!
    select * from zmemplist client specified
        into corresponding fields of table it_ztable.
    it_fieldcat-fieldname = 'ZID_NUM'.
    it_fieldcat-seltext_m = ' ID Number '.
    it_fieldcat-col_pos     = 1.
    it_fieldcat-input = 'X'.
    it_fieldcat-edit = 'X'.
    append it_fieldcat to it_fieldcat.
    clear  it_fieldcat.
    it_fieldcat-fieldname = 'ZLAST_NAME'.
    it_fieldcat-seltext_m = ' Last Name '.
    it_fieldcat-col_pos     = 2.
    it_fieldcat-input = 'X'.
    it_fieldcat-edit = 'X'.
    append it_fieldcat to it_fieldcat.
    clear  it_fieldcat.
    it_fieldcat-fieldname = 'ZFIRST_NAME'.
    it_fieldcat-seltext_m = ' First Name '.
    it_fieldcat-col_pos     = 3.
    it_fieldcat-input = 'X'.
    it_fieldcat-edit = 'X'.
    append it_fieldcat to it_fieldcat.
    clear  it_fieldcat.
    call function 'REUSE_ALV_GRID_DISPLAY'
      exporting
        i_callback_program       = sy-repid
        it_fieldcat              = it_fieldcat[]
        i_callback_user_command  = 'USER_COMMAND'
        i_callback_pf_status_set = 'SET_PF_STATUS'
      tables
        t_outtab                 = it_ztable.
    *&      Form  user_command
          Handling custom function codes
         -->R_UCOMM      Function code value
         -->RS_SELFIELD  Info. of cursor position in ALV
    form user_command  using    r_ucomm like sy-ucomm
                      rs_selfield type slis_selfield.
      case r_ucomm.
        when 'SAVE'.
    endform

    Hi Lawrence,
    Include follwoing code on your user command for 'SAVE'.
    *& Form user_command
    * Handling custom function codes
    * -->R_UCOMM Function code value
    * -->RS_SELFIELD Info. of cursor position in ALV
    form user_command using r_ucomm like sy-ucomm
    rs_selfield type slis_selfield.
    case r_ucomm.
    when 'SAVE'.
          DATA ref1 TYPE REF TO cl_gui_alv_grid.
          CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
            IMPORTING
              e_grid = ref1.
          CALL METHOD ref1->check_changed_data.
             ...............  " your action
         * endform
    Hope this will sovle your query.
    Pratik Vora

  • ALV LIST with few checkboxes fields

    Hi everyone,
    I want to create an ALV with 2 fields that are checkboxes.
    I am succeeding to create an ALV with one checkbox field.
    How do we do in order to create an ALV with 2 checkboxes fields using ALV LIST ?
    I know that we have to specify in the layout of the ALV the name of the field we want it to be checkbox.
    For example :
      gs_layout-box_fieldname   = 'FLAG'.            
    But, how do we specify a second checkbox field ?
    Thanks.
    Regards.

    Slight modification to my earlier post. this is with 2 checkboxes.
    REPORT  ztest_alv_checkbox.
    TYPE-POOLS: slis.
    DATA: it_fcat TYPE  slis_t_fieldcat_alv,
          wa_cat LIKE LINE OF it_fcat.
    DATA: BEGIN OF it_alv OCCURS 0,
           check1(1),
           check2(1),
           carrid LIKE sflight-carrid,
           connid LIKE sflight-connid,
          END OF it_alv.
    DATA:it_events TYPE slis_t_event,
         wa_events LIKE LINE OF it_events.
    SELECT carrid
           connid
      FROM sflight
      INTO CORRESPONDING FIELDS OF TABLE it_alv
      UP TO 20 ROWS.
    wa_cat-fieldname = 'CHECK1'.
    wa_cat-input = 'X'.
    wa_cat-edit = 'X'.
    wa_cat-checkbox = 'X'.
    wa_cat-seltext_l = 'Check'.
    wa_cat-tabname = 'IT_ALV'.
    APPEND wa_cat TO it_fcat.
    CLEAR wa_cat.
    wa_cat-fieldname = 'CHECK2'.
    wa_cat-input = 'X'.
    wa_cat-edit = 'X'.
    wa_cat-checkbox = 'X'.
    wa_cat-seltext_l = 'Check'.
    wa_cat-tabname = 'IT_ALV'.
    APPEND wa_cat TO it_fcat.
    CLEAR wa_cat.
    wa_cat-fieldname = 'CARRID'.
    wa_cat-seltext_l = 'Carrid'.
    wa_cat-tabname = 'IT_ALV'.
    APPEND wa_cat TO it_fcat.
    CLEAR wa_cat.
    wa_cat-fieldname = 'CONNID'.
    wa_cat-seltext_l = 'Connid'.
    wa_cat-tabname = 'IT_ALV'.
    APPEND wa_cat TO it_fcat.
    wa_events-name = slis_ev_end_of_list.
    wa_events-form = 'MODIFY_LIST'.
    APPEND wa_events TO it_events.
    CLEAR wa_events.
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
      EXPORTING
        i_callback_program = sy-repid
        it_fieldcat        = it_fcat
        it_events          = it_events
      TABLES
        t_outtab           = it_alv
      EXCEPTIONS
        program_error      = 1
        OTHERS             = 2.
    IF sy-subrc NE 0.
    ENDIF.
    "After The list display i am modifying the report output
    "using the END_OF_LIST event of ALV
    "here conditionally i can make the cell input off
    *&      Form  MODIFY_LIST
    *       text
    FORM modify_list.
      DATA: l_lines TYPE i,
            l_index TYPE i.
      l_lines  = l_lines + 3.
      "because we have 3 lines extra occupied by lables.
      "if we have header,i mean top of page add the no.of lines
      "how many ever top of page have + 3 for labels.
      DESCRIBE TABLE it_alv LINES l_lines.
      l_lines  = l_lines + 3.
      "understnad this part alone.
      DO l_lines TIMES.
        IF sy-index GT 3.
          l_index = sy-index - 3.
          READ TABLE it_alv INDEX l_index.
          "this is my condition..
          IF sy-subrc = 0 .
            IF it_alv-carrid <> 'AA'.  "place your condition here.
              "accordingly you can disable the checkbox
              "use the below logic
              READ LINE sy-index INDEX sy-lsind.
              IF sy-subrc = 0.
                MODIFY LINE sy-index INDEX sy-lsind
                           FIELD FORMAT  it_alv-check1 INPUT OFF
                                         it_alv-check2 INPUT OFF.
              ENDIF.
            ENDIF.
          ENDIF.
        ENDIF.
      ENDDO.
    ENDFORM.                    "MODIFY_LIST

  • RE; ALV List

    Hi Friends,
    Can anyone provide me link for alv List examples,ex- adition of fields to alv list etc--
    i would be thankfull for ur favour and award points
    Thanks&Regards
    sunilchand

    hi Sunil
    check the below links
    ALV
    1. Please give me general info on ALV.
    http://www.sapfans.com/forums/viewtopic.php?t=58286
    http://www.sapfans.com/forums/viewtopic.php?t=76490
    http://www.sapfans.com/forums/viewtopic.php?t=20591
    http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
    2. How do I program double click in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=11601
    http://www.sapfans.com/forums/viewtopic.php?t=23010
    3. How do I add subtotals (I have problem to add them)...
    http://www.sapfans.com/forums/viewtopic.php?t=20386
    http://www.sapfans.com/forums/viewtopic.php?t=85191
    http://www.sapfans.com/forums/viewtopic.php?t=88401
    http://www.sapfans.com/forums/viewtopic.php?t=17335
    4. How to add list heading like top-of-page in ABAP lists?
    http://www.sapfans.com/forums/viewtopic.php?t=58775
    http://www.sapfans.com/forums/viewtopic.php?t=60550
    http://www.sapfans.com/forums/viewtopic.php?t=16629
    5. How to print page number / total number of pages X/XX in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
    6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
    http://www.sapfans.com/forums/viewtopic.php?t=64320
    http://www.sapfans.com/forums/viewtopic.php?t=44477
    7. How can I set the cell color in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=52107
    8. How do I print a logo/graphics in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=81149
    http://www.sapfans.com/forums/viewtopic.php?t=35498
    http://www.sapfans.com/forums/viewtopic.php?t=5013
    9. How do I create and use input-enabled fields in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=84933
    http://www.sapfans.com/forums/viewtopic.php?t=69878
    10. How can I use ALV for reports that are going to be run in background?
    http://www.sapfans.com/forums/viewtopic.php?t=83243
    http://www.sapfans.com/forums/viewtopic.php?t=19224
    11. How can I display an icon in ALV? (Common requirement is traffic light icon).
    http://www.sapfans.com/forums/viewtopic.php?t=79424
    http://www.sapfans.com/forums/viewtopic.php?t=24512
    12. How can I display a checkbox in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=88376
    http://www.sapfans.com/forums/viewtopic.php?t=40968
    http://www.sapfans.com/forums/viewtopic.php?t=6919
    Regards,
    Naveen

Maybe you are looking for

  • GR/IR MONTH END TREATMENT QUESTION

    hi all, Hear i have a question gr/ir. At month end some amount in gr/ir left as balance, how should i treat that to transfer? What are the configuration steps I should follow? thanku

  • In privacy settings-photos all are GREYED over and set to 'ON'. How can i change this?

    I have just downloaded the app 'Instacollage' and really want to use it but I can not add photos. It gives me the message 'This app does not have access to your photos or video. Enable access  in privacy settings' So naturally, I went to SETTINGS>PRI

  • Change decimal places in a KF

    Hi, I have a KF Amount with Data Type = CURR. This KF has a data element associated ( automatically associated  when is created) with Lenght 17 and Decimal places 2. The KF is used in a ODS as Data Field. Now the user want to update the field, with 5

  • Decrease the width of the bars in the chart

    Hello, Can anyone please tell me how can I decrease the width of the bars in the flash chart type 3D column. Thanks, Orton

  • Internet Explorer 11 and Windows 7

    I have a network of about 225 users that have either IE 10 or 11 installed.  both of these browsers are constantly crashing and display the recover webpage pop up.  The problem does not seem to affect all users.  on affected machines I have disabled