SUMIF Need to add £ to cells for certain category against the date

Hello,
I need some help.
In Table 1 I have coloums for the Date, Amount & a Category.
In Table 2 I would like to break down the Amount spent in a certain category in a certain month.
SOOO if for example:
£100 spent 1/may/13 on advertising
£200 spent 9/may/13 on advertising
£400 spent 4/oct/13 on fuel
Then in Table 2:
Under may row, under advertising coloum would say £300
under oct row, under fuel coloum would say £400
etc etc
What is the formula i need for this????

Here's the part of your image above that shows where the (non) action is taking place:
I'm assuming that "April Earning" is the name of the table on the left and that the word Expenditure is in row 1 of that table.
The syntax for SUMIFS, taken from the Function Browser, is shown below, and compared with your formula immediately below it. April Earnings is shortened to AE so that the formula elements line up reasonably well with the syntax diagram.
=SUMIFS(sum-values,test-values,condition,test-values,condition)
=SUMIFS(AE::D3:D19,AE::C3:C19,"="&A3,AE::B3:B19,"="&B1)
sum-values: Error: Column D contains category names. These are text, and text is given a numerical value of 0, so if this were the only error, the sum is correct. The range should refer to the column containing the values to be summed—column C.
First test-values,condition set: Error: Test 1 compares the contents of A3 (on the table on the right) to the contents of cells in column C in the table on the left. A3 contains "Advertising"; column C contains three numbers, formatted as currency. The word "Advertising" does not appear in column C; the test will return FALSE for all examples. Sum: 0. The range should refer to th column containing the bill categories—column D
Second test-values,condition set: Correct. Test 2 compares values in column B of AE (month number) with the month number in B1 of the right hand table, and returns TRUE where the values match (row 3 of AE) and FALSE where they do not (all other rows of AE.
Fixed and Relative cell references: When corrected, you will want to fill this formula down column B of the smaller table and across to the columns for the other months. When you do, the formula will return either incorrect results or error messages unless you fix some cell references.
ranges: No matter where the formula resides, you want it to refer to the same range of rows in the same columns. Insert a fixed reference operator ( $ ) before each column and row label in each range in the formula. The range in test 2 should look like this:
AE::$B$3:$B$19
cell references:
When you fill down, you want the A3 reference to move down to match the row in which the formula resides.
When you fill right, you want the A3 reference to remain fixed on column A. Insert a fixed reference operator before the letter, but not before the number: $A3
When you fill down, you want the B1 reference to remain fixed on row 1.
When you fill right, you want the B1 reference to column A.right down to match the column in which the formula resides.
Insert a fixed reference operator before the number, but not before the letter: B$1
Regards,
Barry

Similar Messages

  • Urgent -Need to Add new values for the LOV field in forms

    HI,
    I am customizing an existing form. In that i need to add some values for the LOV fied which can be used during run time.
    Please Can some one help me in doing this?
    Thanks
    Suresh P

    Go to Navigator and edit the LOV or create a new one.
    hope that helps!

  • The Web application at could not be found. Verify that you have typed the URL correctly. If the URL should be serving existing content, the system administrator may need to add a new request URL mapping to the intended application

    Hi,
    I have created on windows service to fetch sharepoint list ad update the list items.
    when i run this service in sharepoint server(where the sharepoint site is hosted),it is working fine. If i run the same service in another machine(sharepoint installed in this machine also). it is giving the below error
    The Web application at [URL] could not be found. Verify that you have typed the URL correctly. If the URL should be serving existing content, the system administrator may need to add a new request URL mapping to the intended application.
    Code snippet
    SPSite sharepointSite = null;
                SPWeb rootWeb = null;
                try
                    //SPList current = null, previous = null;
                    string colmId = ConfigurationManager.AppSettings[ID_COLM];
                    List<TaskEntity> list = new List<TaskEntity>();
                    sharepointSite = new SPSite(URL);
                    rootWeb = sharepointSite.OpenWeb();
                    SPList current = rootWeb.Lists[ConfigurationManager.AppSettings[OMEGA_REGISTRATION_LIST]];
                    WriteEventLog("current" + current.Items.Count.ToString());
                catch (Exception ex)
                    ExceptionMethod(ex);
                finally
                    sharepointSite = null;
                    rootWeb = null;
    I have pointed .net framework to 3.5 version and target palform as Any CPU. Please suggest me

    Hi mallela1,
    I also had similar issue couple of months back when I was trying to access a remote URL from a Windows service when the site does not exists in the server where service resides.
    You cannot access a remote url (even though it is SharePoint server and also in same network ) from server object model.
    SPSite can look in the current server only. here what is happening is SPSite will look for this in the current server DB and it is not finding this errror.
    So please dont use ServerObject model for accessing remote sites. You can use Client Object model for the code /requirement you have stated above.
    I wasted lot of time in finding a work around to make to work. It did not. So look for other options.
    Regards,
    Nandini

  • Need to change screen colours for each system in the landscape

    hi ,
    we are in need of having different themes for different systems in the landscape .
    that is
    if i click development system , the screen with 'theme1'
    if i click quality system system , the screen with 'theme2'
    if i click production system system , the screen with 'theme3'
    how to configure this colour setting in accord to the system for all the users

    Hi Susin,
    You would do this by changing the parameter sapgui/theme for each system. It uses the Tradeshow theme by default as of Web AS 6.40. As long as the SAPgui itself is set to "System Dependant" then it should work fine.
    Regards,
    Nelis

  • SD - Manual entries allowed for item category in the Sales Order

    Hi experts,
    please do you know any OSS note related to SD, in order to increase the number of Manual entries allowed for item category in the Sales Order (table T184)?
    Thank you very much
    Andrea

    Hi,
    I searched OSS notes and did not find any OSS Note related to add more than 11 Manual Item categories or append T184 Table.
    Has any found solution for this, will this be a CORE MOD.
    Pavan Verma

  • Can I use more than one blue-tooth device at the same time on IPhone 4S? Like a wireless headsets and speed and cadence sensor for cycling computer, receive the data and listen music simultaneously

    Can I use more than one blue-tooth device at the same time on IPhone 4S? Like a wireless headsets and speed and cadence sensor for cycling computer, receive the data and listen music simultaneously

    As long as the profiles are different (ex. HID vs AD2P) you will not have any issues. But say if you try to use 2 keyboards at once, it won't work. Or 2 headsets at once. Your scenario seems fine.

  • How to assign a button for attachment and send the data through browser ?

    Hi friends,
    How to convert to browser ?
    how to assign a button for attachment and send the data through browser ?
    Thanking you.
    Regards
    Subash.

    Refer to
    How to create a text box in ascreen painter?
    where another user (venkateshwar reddy) has asked a very similar question...
    Jonathan

  • Do I need to add software protectin for moutain Lion 10.8.5

    Do I need to add software protection like norton

    1. This is a comment on what you should and should not do to protect yourself from malicious software ("malware") that circulates on the Internet. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the victim's computer, or who has been able to log in to it remotely. That threat is in a different category, and there's no easy way to defend against it. If you have reason to suspect that you're the target of such an attack, you need expert help.
    If you find this comment too long or too technical, read only sections 5, 6, and 10.
    OS X now implements three layers of built-in protection specifically against malware, not counting runtime protections such as execute disable, sandboxing, system library randomization, and address space layout randomization that may also guard against other kinds of exploits.
    2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user, but internally Apple calls it "XProtect." The malware recognition database is automatically checked for updates once a day; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
    The following caveats apply to XProtect:
    It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets.
    It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
    As new versions of OS X are released, it's not clear whether Apple will indefinitely continue to maintain the XProtect database of older versions such as 10.6. The security of obsolete system versions may eventually be degraded. Security updates to the code of obsolete systems will stop being released at some point, and that may leave them open to other kinds of attack besides malware.
       3. Starting with OS X 10.7.5, there has been a second layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't necessarily been tested by Apple, but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. That may not mean much if the developer lives in a country with a weak legal system (see below.)
    Gatekeeper doesn't depend on a database of known malware. It has, however, the same limitations as XProtect, and in addition the following:
    It can easily be disabled or overridden by the user.
    A malware attacker could get control of a code-signing certificate under false pretenses, or could simply ignore the consequences of distributing codesigned malware.
    An App Store developer could find a way to bypass Apple's oversight, or the oversight could fail due to human error.
    For the reasons given above, App Store products, and other applications recognized by Gatekeeper as signed, are safer than others, but they can't be considered absolutely safe. "Sandboxed" applications may prompt for access to private data, such as your contacts, or for access to the network. Think before granting that access. Sandboxing security is based on user input. Never click through any request for authorization without thinking.
    4. Starting with OS X 10.8.3, a third layer of protection has been added: a "Malware Removal Tool" (MRT). MRT runs automatically in the background when you update the OS. It checks for, and removes, malware that may have evaded the other protections via a Java exploit (see below.) MRT also runs when you install or update the Apple-supplied Java runtime (but not the Oracle runtime.) Like XProtect, MRT is effective against known threats, but not against unknown ones. It notifies you if it finds malware, but otherwise there's no user interface to MRT.
    5. The built-in security features of OS X reduce the risk of malware attack, but they're not absolute protection. The first and best line of defense is always going to be your own intelligence. With the possible exception of Java exploits, all known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "Trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and Internet criminals. If you're smarter than they think you are, you'll win. That means, in practice, that you always stay within a safe harbor of computing practices. How do you know what is safe?
    Any website that prompts you to install a “codec,” “plug-in,” "player," "downloader," "extractor," or “certificate” that comes from that same site, or an unknown one, is unsafe.
    A web operator who tells you that you have a “virus,” or that anything else is wrong with your computer, or that you have won a prize in a contest you never entered, is trying to commit a crime with you as the victim. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
    Pirated copies or "cracks" of commercial software, no matter where they come from, are unsafe.
    Software of any kind downloaded from a BitTorrent or from a Usenet binary newsgroup is unsafe.
    Software that purports to help you do something that's illegal or that infringes copyright, such as saving streamed audio or video for reuse without permission, is unsafe. All YouTube "downloaders," for example, are outside the safe harbor, though not all are malware.
    Software with a corporate brand, such as Adobe Flash Player, must be downloaded directly from the developer’s website. If it comes from any other source, it's unsafe. For instance, if a web page warns you that Flash is out of date, do not follow an offered link to an update. Go to the Adobe website to download it, if you need it at all.
    There is an increasing tendency for rogue websites such as "Softonic" and "CNET Download" to distribute free applications that have been packaged in a superfluous installer that also installs malware or something else that you don't want. Never visit those sites, and get all freeware directly from the developer's own site whenever possible.
    Software attached to email that you didn't request is unsafe, even if it comes (or seems to come) from someone you trust.
    Software advertised by means of spam is unsafe.
    Unknown "free" software that a stranger on the Internet is eager for you to download is unsafe.
    Even signed applications, no matter what the source, should not be trusted if they do something unexpected, such as asking for permission to access your contacts, your location, or the Internet for no obvious reason.
    "FREE WI-FI !!!" networks in public places are unsafe unless you can verify that the network is not a trap (which you probably can't.) Even then, do not download any software or transmit any private information while connected to such a network, regardless of where it seems to come from or go to.
    I don't say that leaving the safe harbor just once will inevitably result in disaster, but making a habit of it will weaken your defenses against malware attack. Doing any of the things alluded to above should make you uncomfortable.
       6. Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was always a bad idea, and Java's developers have proven themselves incapable of implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style virus affecting OS X. Merely loading a page with malicious Java content could be harmful.
    Fortunately, client-side Java on the Web is obsolete and mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice. Forget about playing games or other non-essential uses of Java.
    Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it — not JavaScript — in your browsers.
    Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a task on a specific site, enable Java only for that site in Safari. Never enable Java for a public website that carries third-party advertising. Use it only on well-known, login-protected, secure websites without ads. In Safari 6 or later, you'll see a lock icon in the address bar with the abbreviation "https" when visiting a secure site.
    Stay within the safe harbor, and you’ll be as safe from malware as you can practically be. The rest of this comment concerns what you should not do to protect yourself.
    7. Never install any commercial "anti-virus" or "Internet security" products for the Mac, as they all do more harm than good, if they do any good at all. If you need to be able to detect Windows malware in your files, use one of the free security apps in the Mac App Store — nothing else.
    Why shouldn't you use commercial "anti-virus" products?
    To recognize malware, the software depends on a database of known threats, which is always at least a day out of date. New threats are emerging on a daily basis. Research has shown that most successful attacks are "zero-day" — that is, previously unknown. Recognition-based malware scanners do not defend against such attacks.
    Their design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere.
    In order to meet that nonexistent threat, the software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
    By modifying the operating system, the software itself may create weaknesses that could be exploited by malware attackers.
    8. An anti-malware product from the App Store, such as "ClamXav," has the same drawback as the commercial suites of being always out of date, but it does not inject code into the operating system. That doesn't mean it's entirely harmless. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
    An anti-virus app is not needed, and should not be relied upon, for protection against OS X malware. It's useful only for detecting Windows malware, and even for that use it's not completely effective. Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else.
    A Windows malware attachment in email is usually easy to recognize. The file name will often be targeted at people who aren't very bright; for example:
    ♥♥♥♥♥♥♥♥♥♥♥♥♥♥!!!!!!!H0TBABEZ4U!!!!!!!.AVI♥♥♥♥♥♥♥♥♥♥♥♥♥♥.exe
    Anti-virus software may be able to tell you which particular trojan it is, but do you really care? In practice, there's seldom a reason to use the software unless an institutional policy requires it. Windows malware is so widespread that you should assume it's in every unknown email attachment until proven otherwise.
    The ClamXav developer won't try to "upsell" you to a paid version of the product. Other developers may do that. Don't be upsold. For one thing, you should not pay to protect Windows users from the consequences of their choice of computing platform. For another, a paid upgrade from a free app will probably have all the disadvantages mentioned in section 7.
    9. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default.
    10. As a Mac user you don't have to live in fear that your computer may be infected every time you install software, read email, or visit a web page. But neither should you assume that you will always be safe from exploitation, no matter what you do. The greatest harm done by security software is precisely its selling point: it makes people feel safe. They may then feel safe enough to take risks from which the software doesn't protect them. "Hmmmm, this torrent is a crack of that new game I want. I think I'll download it. It could be a trojan, but the antivirus will warn me if it is." Then they wonder why their Mac is so slow all of a sudden. It's slow because it's running flat out mining bitcoins for a hacker who has already sold their credit card number and banking passwords to a criminal gang. Maybe a week later the antivirus does warn them, but what good does that do?
    Nothing can lessen the need for safe computing practices.

  • Photoshop CC - supplied Jpeg at 6.5"Hx9.5"w. Need to add trim marks for printer at 6"x9". How?

    I have a jpeg which is 6.5" high x 9.5" wide. I need to insert trim marks at 6" x 9" leaving a .125" bleed. I am new to Photoshop but not a complete idiot. I've watched countless videos but don't see how to do this with art already done by someone else.
    Is there anyone who can guide me?

    Both seem appropriate. The issue is, the person creating the original art knew less of the software than I. And I just started.
    The original art she provided is 9.5"wide x 6.5"high. She increased the surface area to allow for .125 bleeds and excess but the image went all the way to the edge of the canvas. I was simply trying to add trims marks for the purpose of cutting in the proper position.
    This was for internal printing on a digital press. Because I would be the only person handling the materials from start to finish (including cutting) I wasn't worried about having to translate the layout on the press sheet.
    I ended up deleting all of the text and stripping the art down to the bare image which I saved and rebuilt the entire art file from scratch, properly with layers and the correct page size. Which worked out great, because the client made changes that I would otherwise been unable to do.
    Thank you all for the information. I'm still a little confused on how to simply add crop marks to someone else' artwork, but I have enough information to figure it out now.

  • While typing on Mac Air the screen went blank, was seen only cell for password. i closed the devise adn after openning it if flashed and now its working. Does it need a tecnical repairing or its fine?

    While typing on my macbooc air suddenly the screen ent almost blank, pale. After closing the device and openning it again it flashed and started working normally. Is it dangerous or its fine?

    Hello,
    According to your user agent, you are on Firefox 32. If you planned to use Firefox 31 ESR, you can grab a copy here:
    * https://www.mozilla.org/en-US/firefox/organizations/
    Out of curiosity, when it turns transparent, is there a "(Not Responding)" appended to the end of the window title? If you don't have the Window title being shown, it might show up if you have window titles shown on your taskbar, or in the task manager (right click on your taskbar and select "Start Task Manager"). If you do see a Not Responding, it could be a slow script on one of the pages you are viewing.
    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
    *Click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
    If Firefox is not running, you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.

  • Before_report Trigger- Need to add a validation for p_start_date

    I have a parameter called p_start_date. I need to make sure the date entered in a Sunday. If not Sunday then give an error message and clear the p start date field.
    How can I accomplish this? Help is appreciated.

    Use to_char on a DATE parameter:
    if to_char(:p_start_date,'DAY') != 'SUNDAY'
    then
    end if;

  • How to add a comment for each row on the output of a report?

    I would like to add a comment (field) for each row on the output of report? This comment should to be saved as well. Is there a way i can do that?
    Regards,
    Ram

    Hi Dimitri,
    through the instead of trigger functionality i am able to update the view. This is view is based on different views which should be linked to a table (as you suggested) in which comments can be stored. Hower this table is empty and how to link this table with the view now? I face the following challenge.
    View consists the following columns, for example
    select name, sex, age from test_view
    name sex age
    John M 20
    Anton M 30
    Willy M 40
    shirley F 38
    sharon F 37
    The report has the following output, for example
    name     sex age
    John     M 20
    Anton     M 30
    Willy M 40
    Shirley F 38
    Sharon F 37
    Now i would like to add comment through a button.
    The report layout looks like
    name sex age
    John M 20 <add comment button>
    After submitting the <add comment button> you can enter text which deals with John
    text='John doesnot like me'
    Finally the report display the comment as well
    name sex age
    John M 20 'John doesnot like me' <update/delete comment button>
    Anton M 30 <add comment button>
    Willy M 40 <add comment button>
    Shirley F 38 <add comment button>
    Sharon F 37 <add comment button>
    After submitting the <update/delete button> you can change or delete the entered text.
    I hope this example clears things up.
    Regards,
    Ram

  • Need help with SQL retrieval for previous month till current date

    Hi ,
    Need help generating statistics from previous month from date of enquiry till current date of enquiry.
    and have to display it according to date.
    Date of enquiry : 03/02/2012
    Application Type| 01/01/2012 | 02/01/2012 | 03/01/2012 |...... | 31/01/2012 | 01/02/2012 | 02/02/2012 | 03/02/2012 |
    sample1 20 30 40
    sample 2 40 40 50
    sample 3 50 30 30
    Hope you guys can help me with this.
    Regards

    Hi,
    932472 wrote:
    Scenario
    1)If i run the query at 12 pm on 03/2/2012. the result i will have to display till the current day.
    2)displaying the count of the application made based on the date.
    Application type 01012012 | 02012012 | 03012012 | ..... 01022012| 02022012|03022012
    sample 1 30 40 50 44 30
    sample 2 35 45 55
    sample 3 36 45 55Explain how you get those results from the sample data you posted.
    It would help a lot if you posted the results in \ tags, as described in the forum FAQ. {message{id=9360002}
    SELECT     application_type as Application_type
    ,     COUNT (CASE WHEN created_dt = sysdate-3 THEN 1 END)     AS 01012012 (should be getting dynamically)
    ,     COUNT (CASE WHEN created_dt = sysdate-4 THEN 1 END)     AS 02022012
    ,     COUNT (CASE WHEN created_dt = sysdate-5 THEN 1 END)     AS 03022012
    , COUNT (CASE WHEN created_dt = sysdate-6 THEN 1 END)     AS 04022012
    FROM     table_1
    GROUP BY application_type
    ORDER BY     application_typeThat's the bais idea.
    You can simplify it a little by factoring out the date differences:WITH got_d     AS
         SELECT     qty
         ,     TRUNC ( dt
              - ADD_MONTHS ( TRUNC (SYSDATE, 'MON')
                        , -1
              ) AS d
         FROM table1
         WHERE     dt     >= ADD_MONTHS ( TRUNC (SYSDATE, 'MON')
                        , -1
         AND dt     < TRUNC (SYSDATE) + 1
    SELECT     SUM (CASE WHEN d = 1 THEN qty END)     AS day_1
    ,     SUM (CASE WHEN d = 2 THEN qty END)     AS day_2
    ,     SUM (CASE WHEN d = 62 THEN qty END)     AS day_62
    FROM     got_d
    See the links I mentioned earlier for getting exactly the right number of columns, and dynamic column aliases.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Do I need to add my 'Home Folder' to options in the Time Machine?

    I dont want to have my 'Home Folder' to be a unencrypted back up.
    I know that Time Machine back up my encrypted sparseimage 'Home Folder' when I log out. FileVault is on.
    But when I am log in, do I need to add my 'Home Folder' into the options button of Time Machine preferences. So that Time Machine does not back up my Home folder unencrypted?
    This is what I have done, is this right or wrong? Time Machine is backing up my 'Home Folder' when I log out.

    I bought my a new white macbook about couple of weeks ago & a Seagate ITb external HD using 400 Firewire cable.
    I partition the macbook into 5 volumes. I turn on FileVault, then a day later turn on Time Machine. It seems to be working fine until I decided that I wanted 6 partition instead of 5. So, I partition my macbook into 6 volumes & use Time Machine to restore all my data.
    Time Machine did restore everything, but when it finish & restarted, it stalled & I had to turn the macbook off, then on. I though everything was fine, then just after I posted my question above, time machine fail to back up, some error message stating it fail to link?
    So I deceided to start from the beginning. I erased the external HD. Deleted the “com.apple.TimeMachine.plist” file from Preference folder. Restarted the macbook, open Time Machine, look inside the exclusion list & I notice that Time Machine put all external volumes into the exclusion list automaticlly including my FileVault 'Home Folder'. So I took out my 'Home Folder' from the list. Then back everything up. This seem to work, until I log out. I notice that Time Machine was not backing up my 'Home Folder' then I got that error message stating it fail to link?
    Then I decided to turn off FileVault, then turn it on again. Deleted the “com.apple.TimeMachine.plist” file. Restarted the macbook, open Time Machine, delete my 'Home Folder' from the exclusion list. Then got Time Machine to do a back up. Log out & Time Machine was backing up my 'Home Folder'. Everything is working, so far!

  • Need a simple  UPDATE statement for updating areas of the polygons

    Hi,
    I need a simple UPDATE SQL statement for updating areas of the polygons in a table shema.table (geom) with sdo_area function.
    Dejan

    Dejan,
    Maybe I don't understand your question but I will offer this:
    update SOME_TABLE t set t.areasqft = SDO_GEOM.SDO_AREA(GEOM, 0.005) where t.geom.GET_GTYPE() = 3
    This assumes a "feet" based SRID.
    r,
    dennis
    Edited by: user633187 on Dec 1, 2008 9:04 AM

Maybe you are looking for