Summarization levels in CO-PA extractor

HI Experts :
I am working on creating additional co-pa extractor. I got the requirement like below:
create the extractor for
CoArea 1100 is using summarization level 3
CoArea 1200 is using summarization level 8
CoArea 1660 is using summarization level 10
CoArea 1550 is using summarization level 20
always using the same info provider .
We are creating the additional extractor . So please any one help creating the extractor using these summarization levels .Please provide me some tips or some steps to create the additional extractor ..(Operating concern already exists)
Thanks in advance.
Reddy

Hi reddy,
see this links.....
http://help.sap.com/saphelp_nw04/helpdata/en/53/c1143c26b8bc00e10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fb07ab90-0201-0010-c489-d527d39cc0c6
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1910ab90-0201-0010-eea3-c4ac84080806
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ff61152b-0301-0010-849f-839fec3771f3

Similar Messages

Summarization Levels in CO

Hi,
Im extracting from a particular CO table in ECC. The CO team is setting up summarization levels for that table. When they create a summarization level the system automatically creates a new table. Since im extracting from the source table how does BI identify the table that the system created automatically? What do i need to do on BI side?
Thanks

Hi,
take a look at this blog:
/people/swapna.gollakota/blog/2008/01/14/one-stage-stop-to-know-all-about-bw-extractors-part2
First link was regarding what you have to do if none of the SAP- predefined extractors meeting the business demand, then the choice is to go for generic extraction.
Additional info:
COPA EXTRACTION
Regarding CO-PA......
http://help.sap.com/saphelp_47x200/helpdata/en/74/e3a226e64e11d1a5300060087a7a87/frameset.htm
Regards
Andreas

KE30 is not picking the data from summarization level

Hi Techies,
We are facing one issue in KE30 tcode.
We are able to run the same report in our QLTY, its showing "Data is getting fetched the data from summarization level 33" and we can see the output within 5 mins, But if we use same parameters in PRO, its showing "Data is getting fetched from segment level".
So we are not getting data in PRO, its throwing TIME_OUT error....
Request you to suggest how we can map these summarization level to the particular report.
*We have already rebuilt and refreshed the summarization levels, then also it is being picked from segment level.
Thanks in advance,
NIck Loy

Hi,
In KE30 right click on the report. Click on change. Go to the options tab. In the performnace block check if radio button "use a summarization level" is selected.
If the customizing is correct then the select stamenet generated by the report may not be in sync with the summ level i.e. the chars in the selection of the report must be there in the summ level.
regards
Waman

'*' in Summarization Levels for CO-PA

Hi All,
What is the role of table "TKETRLF" in Account based CO-PA. When I try to check the CO-PA Datasource it is giving me an error. I tried to debug it and see where exactly is the problem. I found that the standard program is trying to read the data from the above said table and becoz of not finding the required data it is not picking up the summarisation level and throwing the error.
The table has got all the fields from the summarization levels and a flag(0,1,2...) which says if it is a summarization characteristic/user defined characteristic etc. The fields with out a '*' in KEDV has '0' as the flag. If the program finds the flag as '0' for any of the field in one summarization level then it is ignoring that level.
Since I have atleast one field with out a '*' in each of my summarization levels, it is not picking up the summarization level and throwing an error saying "No Source could be found".
This is very urgent...Please someone help me...
Thanks,
RPk.

Hi,
I have the same problem, and I find SAP Note Note 1069507 - BI Extraction : 'Errors occurred during the extraction'. This is for version 5.0, probably it help you, but in my case I am working in ECC 6.0.
Regards,
Gabriel Barroso.-

Summarization Levels in COPA. Tr Code KEDV

Dear All,
I request you to give me some Clarifications on Summarization Levels namely;
1) Are the summarization levels build form Line Items tables(CE1XXXX and CE2XXXX).
2) If so how does it get the field "PLIKZ"(Plan/Actual Indicator) for Plan line items as this field so not part of CE2XXXX, so How is it Updated?
3) Assuming that there are Performance problems even after using Summarization Levels, can you please explain as to how exactly do the Indexs work.?
4) In Indexes, there are 5 Columns with the title "Field", each of the column containing multiple rows, can you please explain what is the use of each of the columns.?
5) i have gone through the OSS Note "83204", in it there is a path(given below) given to download the information on Summarization Levels. However, i was not sure as to how to download it Could you please let me know how to download it.If Possible can you upload the document under "Wiki" or " Articles".
Below is the data and the file path from the note:
===============================================
The document can be downloaded via ftp from the sapserv3 server (binary
transfer mode). The German or English version is stored in directory:
(~ftp/)general/R3server/abap/note.0083204
under the name h83204dt.doc or n83204en.doc.

Hi,
Please follow instructions in note 480180 to download the file. Also for creating index you can refer to note 35288. Together with summarization levels and a proper secondary index you should not face major performace issue. If the performance continues to be bad then you must think about archiving the CE1 or CE4 tables in CO-PA.
Regards,
Abhisek

CO-PA Summarization Level

Hi,
I am very unclear about summarization levels in CO-PA. Please can any one explain me what is the real significance of summarization level, why do we need it and steps to configure it, and on what logic is data extracted from it.
Thank you,
Sam

1. What is use of summarizattion in COPA?
summarization level in Profitability Analysis (CO-PA):
A summarization level is a tool for improving performance.
Summarization levels store an original dataset in summarized form. This gives quick access to presummarized data for functions that do not need detailed information, and means that the data does not need to be summarized separately each time.
you can check this in this link
http://help.sap.com/saphelp_nw04/helpdata/en/ae/bd116e940f11d2b63c0000e82debc6/frameset.htm
2. If we dont give summarization in COPA Account based will records be available in RSA3 - yes
2. How to create summarization level for a datasource?
You can do this in Transaction - KCDU/KCDV or SPRO
Hope it helps.
Regards

CO-PA Summarization Levels

Hi,
for a report with many characteristics I created 4 summarization levels in such a way that
Summarization Level 2 includes all characteristics of the Summarization Level 1 + some more
Summarization Level 3 includes all characteristics of the Summarization Level 2 + some more
Summarization Level 4 includes all characteristics of the Summarization Level 3 + some more
In the report options, in Presummarized data section, I selected "Read upon each navigation step".
Now when I execute the report, data is first read from the Summarization Level 1. During drill down data is read from further summarization levels depending on which characteristic is used for the drill down.
There is one thing that I don't understand:
None of these summarization levels is used by the system if it does not contain the characteristic "Product".
As Product is not used for the initial selection of the report I initially put it on Summarization Level 3. But the system did not want to use Summarization Levels 1 and 2 then. When I added the Product to the Levels 1 and 2, everything is working fine. However this is not what I need because Product is not displayed on the first screen of the report.
Do you know why the characteristic "Product" is required in each summarization level?
I will appreciate your help very much!
With best regards,
Marcin

Hi Surya,
My report is calling all summarization levels.
At the start the summariyation level 1 is called. It is most aggregated so it is little time needed to start the report. It contains only the most frequently used characteristics.
During drilldown other summarization levels can be called (this is achieved thru the option "Read upon each navigation step"). It depends on which characteristic is used for drilldown: if the characteristic used for drilldown is not included in the currently used summarization level, the next least aggregated summarization level which includes this characteristic is called.
The most frequently used characteristics are included in the most aggregated summarization level, the least frequently used characteristics are included in the least aggregated summarization level, which contains all characteristics used in the report.
With best regards,
Marcin

Optimal summarization levels for CO-PA

Hi,
is there any guide or SAP Note how to optimal set the summarization levels for CO-PA?
E.g., how many characteristics should a summarization level contain or how many keydata records is maximum for a summarization level?
Thanks in advance
Regards
Peter
Edited by: Peter Jankech on Feb 1, 2010 11:58 PM

Thanks for reply Pradeep,
unfortunatelly I have not found the information I need.
Does anybody know some other source?
The question is: what is the maximum size of an summarization level (in MB)?
Because if we add more and more characteristics to a summarization level, the amount of keytable records rises and the the summatization level losses its purpose.
Within the OSS 83204 (file h83204en.doc) there is a smatement, that a summarization level is considered as big, if its size is more than 20MB...this is nonsense, our summarization levels are bigger than 1GB. Is there any newer version of the manual to the summ.levels?
Thanks
Regards
Peter
Edited by: Peter Jankech on Feb 2, 2010 3:03 PM
Edited by: Peter Jankech on Feb 2, 2010 3:15 PM

Summarization Levels COPA

Hello all,
I´ve created a Summarization Level using transaction KEDV.
The Summarization Level has still the status "to be created" in KEDV, even when I safe it, it does not change the status, so the tables are not built.
When I try to update/ built/ rebuilt the level by using KEDU, it says it is not possible, because of the status "to be created".
How can I change the status and built the tables for the summarization level?
Thanks for your answers,
Michael

Try using the program "RKETREGN" to build.

Summarization level

Hello Friends,
Are there any standard function modules available to update Summarization levels in COPA?
Thanks.

check the function module
RKD_TR_LEVEL_CREATE
you can check the function group KEDB .
Regards
Satish Boguda

How to link summarization level to COPA- KE30 (T CODE) report ?

Hi,
I have created a report (t code KE30) and want to utilise one of the exixting summarization level. When i run the report it reads data from segment level. What settings are needed such that when i run the report it should read data from summarization level and not from segment level? pl advice
BR,
Abhishek

Hi
http://wiki.sdn.sap.com/wiki/display/ERPFI/COPAPerformanceImprovementusingSummarization+Levels
Regards

COPA Summarization Levels

Hi All,
I have created summarization levels in COPA and when I run the COPA KE30 report with the summarization levels being active or inactive, it produces the same numbers in the Dev system, so no issue there. But in QA system, same summarization levels do not provide the same numbers. The numbers when summarization levels are activated are less than half of the numbers when summarization levels are deactivated. Same problem in the PRD system. I have tried to resolve the issue by creating the summarization levels directly in the PRD system.But the numbers did not match in that case either. The numbers provided by the report when the summarization levels are deactived are less than even half of the numbers when the summarization levels are activated.
I have checked the report parameters in the DEV, QA and PRD systems and they are same.
Please let me know what may be causing this inconsistency.
Can it be because of some basis problem? I mean some memory problem etc which may be causing the summarization tables not to have all the data in QA and PRD systems.

You wouldnt have any message in reports yaar.
Just compare the authorisations in the development system with others.
Also, do one thing., execute transaction SU53 immediately after the report execution, to see for any missing authorisations.

Summarization levels for CO-PC-IS

Hello
So far my production variance report (S_ALR_87013148) has functioned perfectly, but after inserting a new coloum I only get data for only plant.
I posted an OSS message, on which they responed - check note 422543. This note suggests to delete all entries in KKDV... Unfortunately I don't know much about summarization levels - will the needed levels be created automatically when the data collection will be executed again?
Thanks in advance
Best regards
Søren Kirch
LOGSTOR A/S

It is ok to delete the entries.

KEPM report to be using summarization level

Hello
Our planning report in KEPM is considerably slow. I therefore created a summarization level. But when loading the KEPM planningmethod data is still loaded from segment. How can I change that in order to load from summarization level?
Regard
DT123

Hi,
Does the definition of your summarization level really fit the characteristics used and selectionsmade in KEPM?
Is the summarization level active?
Are you sure the data is read only from segment level and not only that part of the data that is not present in the summarization level, because it was posted after the summarization level was last updated?
How often do you update the data i nthe summarization level?
Regards
Nikolas

No summarization level exists for cycle 261001_KEU5

Dear experts!
Now, I'm getting some issue about performing t.code KEU5.
The first, I create cycle with t.code KEU1 with receive tracing factor rule is Variable portions.
Second, I run the cycle with t.code KEU5 then the system display warring message:
No summarization level exists for cycle 261001
Message no. GA790
Diagnosis
The tracing factors for cycle 261001 cannot be read from a summarization level.
This message is displayed when executing a periodic allocation of overhead costs (assessment, indirect activity allocation) if portions are used as tracing factors in at least one segment. It is designed to make you aware of potential improvement in performance which is not being used.
If variable portions are used as tracing factors, the distribution factors are determined from the object level (table CE3xxxx/CE4xxxx, xxxx=operating concern). If there is a large amount of data at object level, selection can take a long time. The summarization levels can be used to pre-summarize the transaction data, resulting in a drastic reduction in runtimes for periodic allocations.
System Response
The tracing factor is determined from the object level. This does not alter the result of periodic allocation, but the runtime can be lengthy.
Procedure
For large data volumes, define a summarization level in the object level in order to improve performance.
For more information, see the program documentation and the customizing functions, which include a form for defining an appropriate summarization level for periodic allocation.
Help me, please!
Best regards, Huy

Hi
Its just a warning message saying that cycle execution time can be more in the absnce of Summ level
You can create summ levels from ORKE > Tools > Summ Levels
br, Ajay M

Summarization levels in CO-PA extractor

Similar Messages

Maybe you are looking for