Summarize cost in multiple projects
I have two projects
Project 1
Project defn: Proj1
lvl 1 wbs : wbs1
lvl 2 wbs : wbs21
lvl 2 wbs : wbs22
Project 2
project defn: Proj2
lvl 1 wbs : wbs2
lvl 2 wbs : wbs212
lvl 2 wbs : wbs222
My requirement is that the costs in project 2 should also be visible at WBS22 in project 1 (statistically).
How can it be achieved.
Have already tried summarization.
rgds
If you are using tables as data source and SQL server as DB then Try using sql expressions for three tables like
expression1:(select sum(amount) from table1)
expression2:(select sum(amount) from table2)
expression3:(select sum(amount) from table3)
Regards,
Raghavendra
Similar Messages
-
Re-allocating Actual Costs and Actual Work from one project to multiple projects
My company would like to track costs in one project and then re-allocate those costs to multiple projects. Example: An end user would submit a timesheet against a task named 'Analysis' for Project A. Once accepted and published, the
costs for those hours would be subtracted from Project A and 60% of those costs would be transferred to the 'Analysis' task for Project X and 40% of the costs for those hours would be transferred to Project Y.
We believe we can accomplish this through reporting, but before we go this route, we wanted to make sure there was not a logical, supported way in MS Project Server to complete these actions. Could a script be developed to accomplish this?
Thank you!
TashaOut of the box Project and Project Server do not support this. However with VBA anything is possible. You could also use PSI to work directly with project data in teh Server db but that would take much longer to develop. Check you can do what you want
in VBA then you can use the result to spec the server version afterwards.
Rod Gill
Author of the one and only Project VBA Book
www.project-systems.co.nz -
Employee Capitalization Across Multiple Projects
Hi,
We are implementing Capex Planning and trying to understand methods/ways to capture the employee costs working on multiple capitalizable Projects.
The available functionality only enable to capture employee cost at one project at one point of time.
Meaning thereby, the transfer in and transfer out functionality(Out of the Box) does not allow the Employee to be available on multiple projects at the same time and does not enable to distribute the employee cost between multiple projects in the same month.
Please help us in understanding how to achieve this in capex planning and what other businesses are doing for the same.
ThanksHi,
You can define a driver account FTE_% and provide a percentage based on cost division by project.
Then use allocation calculation/BR based on compensation/cost to divide the cost between projects.
You will have to change some formulas etc..
Cheers
RS -
Cost / Revenue for Project Role Types
Dear All,
I need your suggestion on cost / revenue rate for multiple project roles type of the project elements. I am defining various project roles such as account manager / project manager / Team leader / Team members etc. which will be assigned to project. There will be different cost / revenue hourly rate for each role type. I have defined hourly cost / revenue rate for organisation management. But i oberved that hourly rate is getting copied to all type of role in project & the same is update as planned cost.
Request you to suggest how to mainatin different hourly rate for various project roles in side project.
Thank you in advance.
Regards,
RanjanHi,
Make sure you have done following settings
SPRO>Collaboration Projects >Connection to External Systems>Accounting Integration>Define Cost/Revenue Rates
here you define Cost revenue rates
Now i feel you have assigned these rates in define Task types in SPRO>Cproj>structure>define task types
in this case it ll take same cost revenue rates.
you remove these
and in SPRO >Collaboration Projects > Resource Management>Basic Settings for Project Roles> Role types
assign the rates.
clear the browser Cache, cookies.
Make sure you log off and then try to create new Project with the settings
It shd help.
P.s. Zhenbo plz correct me if im wrong...
Niranjan
Award points if useful. -
How can I share a *.java source file across multiple projects in NetBeans?
I'm sure this simple and a pretty common operation but how can I share a *.java source file across multiple projects in NetBeans? Right now I keep cut, coping and pasting the same source file between multiple projects to re-use the same code. But I could I make this source file a library file or something like that so that I could access it from any project. I assume this would be a generic operation but I mentioned NetBeans for clarity. Thanks.
fiebigc wrote:
I know I mentioned NetBeans but I'm most interested in the generic method for creating a library of source files that I can call into whatever program I am developing. I've done such a thing in C using header files and such but I'm trying to get a direction on how this is accomplished in Java. I'm sorry if I could edit the title I would. If anyone wants to be specific about NetBeans I welcome that too.
Edited by: fiebigc on Jun 20, 2008 5:57 PM
>I know I mentioned NetBeans but I'm most interested in the generic method for creating a library of source files that I can call into whatever program I am developing. I've done such a thing in C using header files and such but I'm trying to get a direction on how this is accomplished in Java. I'm sorry if I could edit the title I would. If anyone wants to be specific about NetBeans I welcome that too.
Edited by: fiebigc on Jun 20, 2008 5:57 PM
Create a class library.
Write your code, compile it to .class files, put those class files in a .jar file and include the jar file in the classpath whenever you want to compile a project against it. -
How to use multiple projects in single application :)
Hai ,
I ve to use single .portal for accessing multiple projects in a application. if i create two new projects in a application i cant able to use .portlet file of one project to display in another .portal . is there any way to display both the project .portlet files in a single portal. :)not really.. sorry
Kunal Mittal -
Multiple projects in one web role using Azure cloud?
How to run One webrole with multiple projects using azure?
In my solution One WCF service and ane website i want run both on one solution,
How to run both in one domain?
anilbabuThanks for replying,
I want to this type of output,
In my project one solution two projects(one website and one WCF service)
what i am asking is
this type
running both projects single service
http://postimg.org/image/oijwkbn7h/
After
i a hosting into azure that url's like this
How can i get this type of output
EX: http://multliplehos.cloudapp.net/
Service url: http://multliplehos.cloudapp.net/Service1.svc
anilbabu -
How to manage multiple resources in multiple project?
Hello,
We are a very small company that has migrated from an in-house TFS solution to using VSO to manage our projects. One issue we are having is being able to look at outstanding tasks and resources allocated across multiple projects. What I'm looking
for is one place where I can see how many hours a person is allocated for a given week for all projects.
Thank you for your help!
CurtHi Curtis,
You can create a single team project and create teams for each of you project. Then you would be able to monitor all team progress etc using root team project and each team progress can be separately monitor. If you use parallel iterations across all teams
this would be more effective.
For team capacity you can set full capacity to root level and divided capacity levels to each team.
Scaled Agile Framework is explaining similar concept here for more complex situations in below article. But you can use a simplified version of it.
https://msdn.microsoft.com/en-us/library/dn798712.aspx
Cheers!
Chaminda -
How do you purchase multiple projects?
How do you purchase multiple projects in iPhoto? I am trying to buy a calendar and 4 different books that I created on iPhoto. WHen I click the buy button it takes me to a purchasing page, but I can't figure out how to get other projects. There isn't a "shopping cart" that I can find. I'd like to pay just 1 shipping fee. Is this possible?
You can't combine those into one order.
(117833) -
What is the concept of multiple projects
Hi All,
We have multiple development projects and support as well. Now my problem is say in Project1 we are working on OBJECT1, simultaneously the support team is also working on the same object (which is unknown to us). Now while transporting OBJECT1 as part of Project1 it has a dependent objects of support team, thus resulting in transportation errors and object conflicts. From SAP help I read about the concept of using multiple project assignment in transportation. Can anyone clearly explain what is multiple project concept in terms of transportation.
One most important thing I would like to know is how, whilst transportation how SAP is identifying the missing object. For example I am trying to transport a request number, but while transporting it has given an error something like object 'XXXX' is missing. Now my question is how SAP is identifying that object 'XXXX' is missing?
I would really appreciate any useful information.
Thanks,
Venkat
Edited by: putcha venkatesh on Feb 4, 2009 12:14 PMMultiple projects in terms of transportation should make it possible to have a better overview of your transports. This way, a transport request can be assigned to a certain project, making it easier for logging purposes.
During import of the transport request, a check is done on the database (for example if a data element is available) to find out if a certain object is available or not. If not, an error is generated.
So it would be wise, before releasing the transport, to check if all objects you are using are part of another transport as well and if these transports have already been imported before your transport. Check all possible dependencies. It would be better though, to check this before making use of objects which you haven't created yourself in your development objects. -
Multiple projects, multiple lists on Share Point
Hi, I am hoping someone can provide me guidance here.
I am trying to create a project list on SharePoint that shows the Gantt Chart of the task duration. However, there are multiple projects with the same tasks which I would like to capture. For example: Project A has task 1, task 2, .... task 20; Project B
has the same tasks 1, 2... and 20. These tasks and projects are being worked on by different individuals.
What I would like to capture is the duration of each tasks for these projects in one list on Share Point. Is it possible?
any response would be greatly appreciated.
thanks in advance for your time.Making this more complex adds potential rendering difficulty down the line.
One list is indeed better and can be managed more easily. you'll be able to present different views of the data on different web part pages if needed, along with additional metadata,
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem. -
FCPX 10.0.7 hangs when loading multiple projects - a non-destructive work around
FCPX 10.0.7 hangs when loading multiple projects - a non-destructive work around....
Hi Guys, I upgraded from FCPX 10.0.6 to 10.0.78 and discovered to my immense frustration that many of my 100+ FCPX projects would not load.
Symptom:
FCPX 10.0.7 appears to hang ("spinning beachball") with either high CPU% on a single core or with 1-2% CPU busy (activity monitor.app) when a FINAL CUT PROJECT is selected. No logs error information in /var/logs ..hmm
notices that the "status circle" spins around endlessly.
Actvity Monitor.app shows "Final Cut Pro (Not Responding)
and also I notice in some cases that an OEM filter ("NEAT VIDEO NOISE REDUCTION") is in progress to be loaded. FCPX V10.0.7 must be FORCED QUITtted to remove it from system.
History: Upgraded FCPX from V10.0.6 to V10.0.07.
"FINAL CUT EVENTS" and "FINAL CUT PROJECTS" on a single file system on SAS 16TB disk array (768MB/sec read via AJA system test) and 60% utilised capacity… FCP EVENTS has 400 events in it .. some 5.2TB of Prores essence etc .. all works fine! (i.e. the storage system is first class and is NOT the issue)
32GB of RAM on MAC PRO 2009 Nehalem 16 x Vcore with ATI 5780 card and ATTO HBA's (i.e. plenty of resources!)
As usual with any "upgrade" to FCPX 10.0.? all the EVENT objects need to be upgraded. In my case this takes an hour or two.. so I do that when asleep.
After experiencing above, I restored the FCPX EVENTS LIbrary of that file system from LTO4 tape archive (BRU-PE ) and still had the same issues as above.
WORKAROUND:
FORCEd QUIT FCPX V10.0.7
RENAMEd "/volumes/some_file_system_volume/Final Cut Projects" to "/volumes/some_file_system_volume/Final Cut Projects_original"
created (make) a new "/volumes/some_file_system_volume/Final Cut Projects" (use finder)
For each project !!! in "/volumes/some_file_system_volume/Final Cut Projects_original", (do one project at a time!!!)
MOVE "/volumes/some_file_system_volume/Final Cut Projects_original/one_fcpx_projext_nnnn_folder" to "/volumes/some_file_system_volume/Final Cut Projects"
Make sure you move ONLY one project at a time. If you have a subfolder of projects, please do each project one at a time (serially!)
Launch FCPX V10.0.7 and BE PATIENT!!! .. DONT click or fiddle with the UI.. it seems when you intervene it locks up as well…
Let FCPX V10.0.7 settle….
select the project you just added above and RELINK any objects it needs. Thumbnails and proxies will be rendered again.. just be patient
wait until ALL the rendering as stopped.
QUIT FCPX V10.0.7
(now if FCPX locks up, just force it out and start again as above).
repeat for all projects in "/volumes/some_file_system_volume/Final Cut Projects_original" (go to step 4 ad do until all projects moved)
When all is COMPLETED MAKE SURE YOU ARCHIVE an instance (or make a backup ) of "/volumes/some_file_system_volume/Final Cut Projects"
If this procedure has worked the folder "/volumes/some_file_system_volume/Final Cut Projects_original" will have zero (nill, none) projects in it.
I have managed to restore ALL my "/volumes/some_file_system_volume/Final Cut Projects" this xmas between drinking etc. I'm satisfied that its all ok.
Other issues:
use DISK WARRIOR or TT PRO 6 to make sure that the file system volume where your "/volumes/some_file_system_volume/Final Cut Projects" are is physically ok. I noticed some entries in file system's volume table that represented objects in "/volumes/some_file_system_volume/Final Cut Projects" were at fault when I used these utilities… FWIW.
SUMMARY: yes this took ages to d, however luckily I had everything in at least 3 instances in an archive which has saved me many time in the old FCP& and prior days… it was just a matter of time to put it back together.
I put this outage down to may be my own impatience when I first fired up FCPX 10.0.7 after the upgrade.
I'm interested if this workaround is helpful to others and in addtiion if others have a more satisfactory remedy.
HTH
warwick
Hong KongHi Eb, yeah I could not see any "memory leak" or unusual consumption of REAL memory whose less availability would cause excessive PAGEing and SWAPping as seen in the Activty Monitor.app
I watch this carefully especially the use of REAL MEMORY by 3rd Paryy apps. BTW there are a few that cause ALLOCATED but NOT USED memory (blue in the A.M.app UI). Simply a unix PURGE command can release that memory and help clean up the PAGE and VM swap files (its alleged!).
Yes, you may be might with the element of "Luck" involved. I would add though, that having MULTIPLE project displaying in the STORYLINE window and loading always caused my FCP 10.0.7 jam up at startup with h symtoms and observations I described.
TIP: I might also add that for a super speedy launch of FCPX one may also emply setting each PROJECT's UI to show only AUDIO thus negating the need to contstruct or reneder out a PREVIEW ui in each clip in the storyline.
Your/Apples suggestion of the movememt (rename) of "Final Cut Pro Projects" to "Final Cut Pro Projects Hidden" is similar to what I proposed above to stop FCPX 10.0.7 accessing and building it up at startup. This workaround has been useful inthe past as well.
ALso one might also get the stick out and remove (delete/rm) the ~/Library/Saved Application State/com.apple.FinalCut.savedState in one's home ~/Library so that FCPX wont do such a neat job reinstating FCPX last time you crashed it... This has been helpful also in diagnosing my issues.
Lastly I have noticed that:
impatience clicking on the FCPX UI when in the unstable state causes it to lock up with NO visible CPU% busy.... as if its waiting on something which is usually me MEMTERMing it via FORCE QUIT and
the projects where I have employed the NEAT VIDEO Noise Reduction OEM filter for FCPX seem to exasserbate the PROJECT loading issues when several PROJECTS are available at FCPX startup time.
As of yesterday I have some 400+ EVENTS Final Cut Pro Events and 130+ projects of varying compexites in a single file system on Final Cut Pro Projects all working fine and as good as gold again!
Oh and one more thing, I had to RE-RENDER many projects of them again... strange as the FCP PROJECT library was renstated from a recent LTO archive as of V10.0.6 FCPX.. strange that...I would have expected if the projects and events were 10.0.6/7 compatable as proposed by Tom, that this would not be necessary... hmm straneg that
I'll monitor this thread.
Thanks for your comments lads! -
Purchase Orders_ Multiple projects not permitted on a single purchase order
Hi Guru
Please assist:
We are using the MM & PS for Purchase Requisition, the Account Assignment N and the buyers created PO with different Network numbers on one Purchase Order,
I want to delete the purchase order and i am getting the message Multiple projects not permitted on a single purchase order
How do i delete this PO, i have tried the delivery complete and final invoice tick its not working
Regards
SusanThe Apple Configurator tool robbed my school of @ 60×4 apps.
Here's my mistake. I bought all the apps needed for the whole school in one lump sum. i.e. 350 copies of Pages. Then happily went to Configurator and loaded the spreadsheet. Installed on all the student iPads. Then need the remaining licenses to gift to the teachers and @ 30 for the cart. NOPE! Once they are loaded in to Configurator you can never get them back. Apple said, “sorry”.
I did this for the iWorks suite, iPhoto, & neu.Annotate before I realized what was happening.
This is what to do, in short. From the VPP account, buy the number needed for exactly what you need, just make sure, it's over 20, even if you only need 11, 20 copies is cheaper than 11 because they are half off at 20 or more. Get the spreadsheet generated by the VPP site for the 20 then buy for the next cart or site, it will generate a new spreadsheet of 20 you can give to the computer and its copy of Configurator.
https://schoolipads.wordpress.com/2013/03/23/vpp-configurator-multiple-carts-or- locations/ -
Delivery cost with multiple account assignment
Dear SAP gurus,
I found a problem in here. In my company we are using multiple account assignment in PO with multiple asset entered in one line. This PO actually will have customs and delivery cost inside of it, however it is not know at the time of PO creation. When the forwarder send the goods, sometimes the shipment can contain more than one PO as well, thus it is impossible to determine the exact value of delivery cost at the time of PO creation.
When the goods are delivered in the FOB point, the vendor deliver goods will send the invoice for goods, and when the goods delivered to our warehouse, then the forwarder will deliver the invoice for the delivery cost. So there is no sequence of the invoicing. Sometimes the goods are invoice earlier than the delivery cost, sometimes it is later.
My requirements are to make sure that the delivery cost is being posted to the asset account of the goods that are being delivered in the PO. I have tried these options:
a. Planned delivery cost inside the PO --> when posting invoice for planned delivery cost, got error message that there is no delivery cost in the PO. I think this is because of the multiple account assignment because when creating PO and inputting the delivery cost i do get warning that no delivery cost for multiple account assignment,
b. Unplanned delivery cost --> ONLY work if the invoice for delivery cost and goods are being posted as one document, which is not the case in here.
c. Separate PO for delivery cost --> got issue in which the person who supposed to create the PO for delivery cost, would not have any idea what asset no to be used (worse --> if the asset is being delivered partially).
Do you have any idea of what to be done in this case? Please help.
Best regards,
John.See while making the invoice for the delivery cost you have selected the aggreation as planned delivery cost and in the PO you have not maintained the deilvery conditions .The pricing conditions which you have maintained must ebe have condition category - delivery cost .The system will not give thr message thhat you have not mainatined the delivery cost .If you have condition as mandatorty it will show that the conditions ( mandatory) are not maintain.In order to maintain the delivery cost you have to check your conditions whether they are delivery cost related conditins and if then maintain there values in PO and check while doing invoice you will get.
You have also the option of entering the delivery cost at time of the Invoice as unplanned delivery cost ...........
Just check your conditions which you have maintained the calculation schema as delivery conditions and maintain the values and do the invoice proceesing .
It is not advisableto cretae the sepearted PO for the delivety cost as it is not good way of doing the proceess.
Regards
sunny -
Mass change Tcode for status of multiple projects
Dear All,
Any SAP Standard t code for mass Status change for multiple Projects
(like TECO,AALK).
Thanks.
ArunHi
You dont have this option in any STD SAP t.codes, where you can change the status of the projects/WBSE collectively.
So use this BAPI to Read the status of Project/WBSE
BAPI_BUS2001_GET_STATUS To get both the active system statuses and the user statuses for a project definition
use this BAPI to Change the status of Project/WBSE
BAPI_BUS2001_SET_STATUS
one system status and one user status can be revoked each time, and one system status and one user status can be set each time for a project definition
For Network order status change
BAPI_BUS2002_SET_STATUS
Set/Reset Network Status. At the same time, you can revoke one system status and one user status, or set one system status and one user status in a list of activities for the network.
Thanks
S.Murali
Edited by: S. Murali on Jul 24, 2009 3:43 PM
Maybe you are looking for
-
I accidentally clicked "restore" when I meant to "back up" on my iphone 5, is there anyway I can undo that and get back to what I had?
-
Clearing date and Posting Date of a clearing document
Hi, We have seen some cases in our system in which the clearing date and clearing posting date of a document is older than the creation date of the document. Please guide me: Should the above describe case be happened or allowed to be happened? Can w
-
How to send Notification email to Outlook mail?
Hi all, am new to workflow, is there any possiblity with sending notification emails using rule? in my requirement i have to send email notifications to concerned manager using A002 relationship in HR? Can anybody help me? Thanks in advance,
-
Can we test and use ES from workplace with release state : "Restricted"
Hi folks, I need a ES for my Composite Application, I have previously tested few ES from ES workplace. But I need to access another ES (for canceling a SO) :- http://esoadocu.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?packageid=
-
Data missing in 0PA_C01
Hi, I load master data 0ACTIONTYPE, 0EMPLOYEE, 0PERSON, and load transaction data, buit 0Person data is missing in the cube, i checked the sid table it is showing just 0. Please some one explain how do fix this problem, Thanks