Summarized Hierarchy for variances caluculation -Issue

Hi,
1.I have created summarization hierarchy in KKR0
2.I have executed KKRC for data collection
3.I have executed KKBC_HOE for report
When i executed KKBC_HOE for report i am getting the below error.Kindly advice me on this
NOTE: It is working fine in Sand Box,It is not working in Quality testing client and giving the below error.
Summarized object does not exist: CO AFCOHIER
Message no. KN020
Diagnosis
You have not carried out summarization for this order hierarchy or cost object hierarchy. For this reason it is not possible to display any information on node CO AFCOHIER .
Procedure
Carry out order summarization or cost object summarization. Then call up the function again.

Have a look at SAP Note 854998, 610999 or 649124

Similar Messages

How to see Summarized Hierarchy for Variances after variance calculation

Hi,
How to see Summarized Hierarchy for Variances after variance calculation.
Thanks
Sunitha

hi Sunitha,
KOB3 is the t.code. assign me kindly.
regards
Sirisha

How to implement Approval hierarchy for Sales Order in Order Management.

Hi,
We need approval process for sale orders in Order Management module. Currently we are using credit HOLD option for orders at shipping level. The issue we are facing now is we can not cancel those orders who contains Service Line item in it while on HOLD. The restriction raised at the time of cancelling the order that the Line Item is "fulfilled". Service line item's get fulfilled.
Is that any other possibility to have Approval hierarchy for Sales Orders in Order Management Module? If it is possible can anybody share the related document or implementation guide?
Thanks with anticipation in advance.
Many Regards
Kaleem Bhatti

I copied the standard order header workflow and the "Book Order, Manual" workflow to custom workflows. I then modified the "Book Order, Manual" workflow to put another completely custom workflow (call this "Approvals") in between the "Book Eligible" and "Book" steps.
The "Approvals" step assessed the sales order, changed the order header to the pending approval flow_status_code, and sent out the appropriate notifications. The "Approvals" step returned a Complete/Incomplete where complete would proceed to "Book" and incomplete would go back to "Book Eligible." The new workflow was then assigned to the order type needed. I don't still have access to that environment (job change) or I would give more definite instructions.

Error :Check product hierarchy for uniqueness

Dear all ,
load is failing with below message
Error:Check product hierarchy for uniqueness.
please suggest
Regards,
Puru

Hi Purshottam,
Check the technical names of the hierarchy nodes. They should not be same.
This issue is faced when technical names of the hierarchy nodes are same.
To solve this issue, modify the technical names of your hierarchy nodes and then try loading the hierarchy.
Thank you,
Ketan Z

Error : No basis hierarchy for product type 01

Hi
When i am trying to create product hierarchy in CRM 5.0 the following error
"no basis hierarchy for product type 01" is futuring in the system,I would rquest you help in this issue.
Regards
Krishna

Hi All,
While congiguring the material system showing the same mssg like "No basis hierarchy for product type 01". Even If I created the hierarchy. Plz any body is there to solve this issue.
Thanx
Chinmaya

Error when charging hierarchy for infoObject hieracky for 0MATERIAL

Error when charging hierarchy for infoObject hieracky for 0MATERIAL from infosource 0MATERIAL_LKLS_HIER.
I have an issue when performing a charge of the material hierarchy for the 0MATERIAL InfoObject. The problem is that maybe there are some referential problem. I show you 2 images about that.
[http://bp1.blogger.com/_RnNmoD1OiLE/SE1AyQThUgI/AAAAAAAAAmU/PPp7Uwn22PI/s1600-h/ErrorCarga1.JPG]
[http://bp0.blogger.com/_RnNmoD1OiLE/SE1A6bGswnI/AAAAAAAAAmc/Gtvotn1nilI/s1600-h/ErrorCarga2.JPG]
Could please anyone give me a clue about what's my problem? All regs i'm trying to upload to my BW system give the same error. The datasource i'm using is 0MATERIAL_LKLS_HIER. As you can see, it has registers on it.
[http://bp2.blogger.com/_RnNmoD1OiLE/SE1BBvyBAOI/AAAAAAAAAmk/i2aXHvt8E7o/s1600-h/ErrorCarga3.JPG]
Any Idea? Thank-you!
Artur.
Edited by: Artur Rodriguez Coma on Jun 9, 2008 4:59 PM
Edited by: Artur Rodriguez Coma on Jun 9, 2008 5:00 PM

For this you can enter the screen of infoobject change and select the hierarchy tab at the bottom theres a button External Characteristic in Hierarchy ....there you can set other infoobjects that can be part of the hierarchy of your infoobject...
This is the procedure but you only can add infoobjects that attributes of the principal infoobject ....
I hope this helps
Regards

Standard hierarchy for cost centers, transactions okeon, okenn

Hello,
When I run transaction okenn (or okeon) I cannot see hierarchy for any cost center group. Exactly, option 'expand subtree' cannot be executed so I am not able to see all nodes of the specific cost center group. I can only see the name of the cost center group, or cost center itself, but not as expanded tree.
What could be the problem? Do I have to define something additionally?
Best regards,
Dragan

Hi,
I don't really trust SU53...it's unreliable as it only shows you the last authorization object checked. Please verify via an authorization trace in ST01. If the issue is indeed PLOG please check SAP notes 177844, 211991 & 175063.
Once you have gone through the notes please run the hierarchy master data comparison (OKEON-> Menu -> Extras).
The issue regarding PLOG and the standard hierarchy is well known in support, but I haven't seen it around in a while....
Regards
Karl
Edited by: Karl Helm on Mar 24, 2009 5:38 PM

Sharepoint 2013: Problem / Error when creating Variation Hierarchy for French and German Languages from Variation root EN

Hi,
I have a website with English and Arabic Language Packs installed. I have the corresponding Variation heirachies created and the whole site collection is published.
Recently the client asked for french and german languages to be accomodated as well. So I followed the same approach I did for English and arabic (installed the language packs) for foundation, ran ocnfiguration wizard, installed server language pack &
ran configuration wizard.
But after creating the variation label, when i try to create the variation heirarchy, I am getting the following error.
"Unknown failure when creating a variation of page http://server:port/en/pages/default.aspx in label /fr/Pages/default.aspx.
The Variations Create Hierarchies job failed with the following error message& Unknown failure when creating a variation of site
http://server:port/en in label fr."
Am not sure what is going wrong. Appreciate a feedback.
Thanks,
SSP
SSP

Hi,
According to your description, my understanding is that the error occurred when you created the Variation Hierarchy for French and German Languages from Variation root EN.
I recommend to check the Resources folder located at C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15 to see if the file core.fr-FR.resx exists in the folder.
Here is a similar thread for you to take a look:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/611575b2-d129-44c6-814b-2e5782178850/unknow-failure-when-creating-variations-in-sharepoint-2013-is-this-a-bug-in-sharepoint-2013-rtm?forum=sharepointadmin
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Create a Navigational Hierarchy for filtering with the Table API

Hello,
I've built a WAD report acourding to the how to document: "Create a Navigational Hierarchy for filtering with the Table API".
It works great but i dont know How to make the hirarchey to show the key and the text.
Please Advice.
David

Hi Kenneth,
please have a look in the source of the executed Web Application. What is inside of the <div> with the id filter?
You should also find a td tag with id hier_xyz with xyz the filter inside of the <div>-Tag with id filter.
Also check whether you have a javascript error.
Have a look on the Javascript function set_style. Perhaps you can paste it here, than I can have a look.
Heike

Re complaint for the same issue

Below is the issues that I am facing and I mail to lenovo many times but no response from lenovo care, now the issues are getting worse and worse as jut three to\two days back my lenovo kick get shutdown and stuck on Intel logo and then I go to service center located at Nehru place in new Delhi they open my phone and install new software now I just don't know why to install software they open my phone and from that t\day when my phone reaches to 15% to 10 % battery level phone get blank instantly then I have to plug in the charger to again switch it back , this phone is the lenovo flagship model and I purchased two phone same time both phone get replaced one times but the one phone is working fine and but one phone having this serious issue and when I go to service station they every time says that u have to leave phone for two weeks for at least why the dammn I leave my phone to service center for two weeks just for diagnosing the issue without phone there are lots of trouble I have to face in my daily life please look into this matter , as if this matter not resolve by lenovo as soon as possible I definitely go to file a case against lenovo in consumer court, ---------- Forwarded message ---------- From: Lencare <[email protected]> Date: Mon, Dec 23, 2013 at 5:23 PM Subject: RE: re-complaint about the same issue To: MIDH Care <[email protected]> Cc: "******@gmail.com" <******@gmail.com>, "[email protected]" <[email protected]> Hi Team, Please find the E-Mail below, request you to do the needful. __________________________________________________________ Thanks & Regards, Lenovo Customer Care, India. Please note that any E-Mails with attachments exceeding 10 MB will not reach us due to limitation in the Attachment Size. From: PranjalOctane [mailto******@gmail.com] Sent: Monday, December 23, 2013 12:00 PM To: [email protected]; [email protected]; MIDH Care Subject: re-complaint about the same issue my name is ranjal dutt i purchased lenovo k900 serial number is ****** the issue is that this phone is i am using replaced once just because of the heating and low battery issue , now after replacing and using it after some days i am facing the problems again , the same with some new ones the problems are listed below: 1.low battery backup 2.heating issue 3.hang 4.screen flicker i am using this phone and i am getting only 5 to 6 six hrs of battery backup , and with heating issue , when i am browsing internet or playing any kinda video it get heats so much and battery drains so fast for me it is pain when i ma in need of clicking some pics or surf to internet as there is very low battery backup , my friend also brought this phone with me on same day they also have this same issue but after replacing his phone the problem get solved , kindly see on my issue as if this issues persists again and again how can we refer lenovo phones to other persons ******
Moderator note: personal information and serial number removed for member's protection.

why no body here fo replying my issue..........is lenovo is such a bad company

Define Number Assignment for Goods Receipt/Issue Slips

Hi Experts,
please can you help in the creation of manual creation of transport request for the customizing activity "Define Number Assignment for Goods Receipt/Issue Slips": settings for assigning goods receipt/issue slip numbers upon goods movements (MM) or deliveries (LE-SHP)?
Customizing for this functionality is composed by the following points:
1. functionality activation at plant level
2. number range group/interval code assignment
3. Groups and intervals creation
4. Plant / Storage Location / Movement type combination assignment to number range group.
Customizing request is automatically created for points 1, 2, 4, but NOT for point 3 where you have to create Groups, Intervas and assing each others.
You receive a message from SAP that you have to insert the relevant object manually into transport request.
Please can you tell me exactly what I have to put into transport request as object:
- Program ID (I think R3TR)
- Object Type
- Object name
and any other relevant information with all the details.
Thank you very much
Kind Regards
Andrea.

Hi
You need to create the transport request by selecting the required number & clicking on the trnsaport icon, then a prompt for transport request will be displayed, there you can create the request & move it to production.
Reward points if usefu;
Thanks & Rgards
Kishore

Unit of measure for stock , Goods issue , Purchase.

Dear All Experts,
How we can maintain different unit of measure for Stock, Goods Issue, Purchase?
Regards,
Sandeep.

Hi,
The UOM qualifies the quantity you enter on the
purchase order line. This will default in if you entered an item number, if not enter
a UOM of your choice using the List of Values.
Please Refer the following links...hope it helps you....
http://help.sap.com/saphelp_45b/helpdata/en/c6/f83bb94afa11d182b90000e829fbfe/content.htm
http://www.admin.cam.ac.uk/offices/finance/training/manuals/inv_training_stores_user.pdf
Regards,
Udaya.

I have an iPod Nano that is synced to my mac, but it is sent in for the battery issue. Anyway, I have bought a 2nd gerneration Ipod touch and I want to now sync it to my mac, but it does not show up in the left menu bar. Please help. Thanks All!

I have an iPod Nano that is synced to my mac, but it is sent in for the battery issue. Anyway, I have bought a 2nd gerneration Ipod touch and I want to now sync it to my mac, but it does not show up in the left menu bar. Please help. Thanks All!

http://support.apple.com/kb/TS1591
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again.

I have a Windows 7 Professional, 64 bits on my computer and have recently installed iTunes 11.1.3.8. but i started having this msg :"The folder iTunes is on a locked disk or you do not have write permission for this folder" issues: how can i solve it?

I have a Windows 7 Professional, 64 bits on my computer and have recently installed iTunes 11.1.3.8. but i started having this msg :"The folder iTunes is on a locked disk or you do not have write permission for this folder" issues: how can i solve it?

Right-click on your main iTunes folder and click Properties, then go to the Security tab and click Advanced. If necessary grant your account and SYSTEM full control of this folder, subfolders and files, then tick the option to replace permissions on child objects which will repair permissions throughout the library. This is the XP dialog but Windows 7 shouldn't be too different.
If it won't let you change the permissions use the Owner tab to take ownneship from an account with administror privileges.
tt2

Although photo appears beautiful on phone screen, when reviewed in gallery, half the picture has a large line going through it. Any ideas? I went to VZN and they replaced my first new phone 3 days ago for this same issue.

Although photo appears beautiful on phone screen, when reviewed in gallery, half the picture has a large line going through it. Any ideas? I went to VZN and they replaced my first new phone 3 days ago for this same issue.

I'm sorry your pictures appear different in your gallery sillyymom. I know its frustrating with viewing important images. Are you using a 3rd party picture application? do you have any apps that may be conflicting with your pictures. Have you tried to review your picture settings?
KinquanaH_VZW
Follow us on Twitter @vzwsupport

Summarized Hierarchy for variances caluculation -Issue

Similar Messages

Maybe you are looking for