Summarized vs. Line Item Level Security

Well, I haven't posted a question on here for quite some time, and yet I've been handed a requirement that I'm having a tough time figuring out how to work. Let me set first what the requirement is so it is understood.
Our sales group has global reports which list data for our entire company. Embedded in these reports in a qualifier (iobj) for region. So we can grant users to these reports by region and they only see the sales data for their area. However, we now have a requirement for account managers to not only see all data at the region level, but also GLOBAL data for a specific customer that they own - all in the same report. So, the report should list out all customers and figures for the local region the user is authorized for, however it should also have items listed for other regions specfic to one or two customers, again in the same report.
I assume this can be done, but we are having a tough go with the build of the analysis auths. Ive built two roles, one with * for region and a specific qualifier for the customer number (which is a characteristic mind you, not an iobj). Then also built the other role with the specific region (NA), and no qualifier for the customer number.
Is what requested even possible? As always, thanks to the community for assistance. Also - if i've assigned this in the wrong forum, please move it (admins). My apologies if this is the case.
Thanks!
Kind Regards,
Wayne

Hi Wayne,
Are you reading the data from BW? from Universe? BW query?
If the data source is BW or a query, anyway, one of the options is to create the role/group in BW, it means that the SAP autentication will do all the job once you have imported the roles in the CMC.
Other way, detect the user ID and launch the job with parameters predefined.
Regards.

Similar Messages

In report painter report, line item level drilldown report requirment

Dear All,
I created one report in GRR1, when I execute the report i am not getting line item wise drilldown option. For example one cost center no of line itemwise posting ( g/ls wise)posting is there. By double clicking on that specific line item we will go that ledger and see the data available in that ledger.In standard reports that option available but my own reports I unable to go drilldown at ledger level cost reports.
Please sugget anyone, where I am doing mistake in report creation level.
Thanks
M Srinivasa reddy
Ph : 9637399076

Thank you,
I attached reports to Library based on that I am able to drilldown line item level of the report.Is it corret or any other way for line item level drilldown option for report painter reports
Thanks
M Srinivasa reddy

Report at line item level but also for document total for once only

Dear all,
seek for your help for the following issue
There is a A/R invoice with 3 items
There is a report for retrieving the line item level data from inv1, user would also like to add a column to display the Document total , but the problem is, each line item will also display the Document total, any method to only display the corresponding Document total for once only?
Example, for AR invoice number 1234567:
Currently:
No.                ItemCode        Price      Qty    LineItemTotal      DocumentTotal
1234567       Item-A            10           1       10                       100
1234567       Item-B             50          1       50                       100
1234567       Item-B             20          2       40                       100
Requested to be presented as:
No.                ItemCode        Price      Qty    LineItemTotal      DocumentTotal
1234567       Item-A            10           1       10                       100
1234567       Item-B             50          1       50
1234567       Item-B             20          2       40
Thank you very much!!!

Hi,
Try This.....
select T0.DocNum ,T1.ItemCode ,T1.Price ,T1.Quantity ,T1.LineNum ,case when T1.LineNum ='0' then T0.DocTotal else 0 end    from oinv T0 inner join INV1 T1 on T0.DocEntry =T1.DocEntry where T0.DocNum=[%0]
Thanks
Shafi
Edited by: shafi_sunshine on Oct 19, 2011 12:50 PM

Shopping cart header status differs to status at line item level

Hello
I am using SRM 5.5 EC, got a situation where there is a single line shopping cart which has been approved. The status on the header is still showing "awaiting approval" but at line item level it shows as being "approved" and no follow on document has been created.
Can anyone help and let me know why this has happened and how to change the header status now?
Many Thanks in Advance
Prakash

OK found a solution

Switch to Open Item Management at a Line Item Level

Hi Guru's,
I want to change a non Open Item G/L account to an Open Item at Line Item level, we are on version 6.4
We have activated New G/L and I checked OSS note 175960, it says its not applicable if New G/L activated.
I tried program FAGL_SWITCH_TO_OPEN_ITEM , it switched the account to Open Item but the problem here is it did't switch at line item level it is just showing total balance. My requirement is to switch at Line Item level.
Is there any solution other than creating a new A/c with Open Item checked and transfering balances from old A/c to new A/c.
Please suggest
Thank You

Hi,
There are 3 ways to realize it.
1. create a new account with XOPVW, then transfer the balance from old account to the new one. this is recommended by SAP.
2. if you want to change flag of XOPVW in this account, then make the balance to zero, then change this flag in FS00, at last trasnfer the balance back to this account-> Not recommended by SAP, because it is easy to cause data inconsistency.
3. method in note:175960-> but report :RFSEPA02 and RFSEPA03 are not support since release 4.5A.
So if possible, suggest you to use 1.
Best Regards,
Gladys

Item Level Security not working with Tabs

I've Portal 9.0.2.2.22
This issue is with Item Level Security with Tabs. Here is what I've have:
Page Group: MyPagegroup (Privs: portal => Manage All)
Page: MyTestPage (Privs: portal => Manage All,
testUser => View)
There is a tab called MyTab on page MyTestPage which has two items (simple images) image1 and image2. The tab's access privs have been set NOT to inherit from the page. The public check box has not been checked for the tab. I've specifically assigned access privs to the tab.
Now here are the two scenarios that I'm having problem with:
1) MyTab (portal => Manage All, testUser => view)
image1 (ILS enabled: portal => Manage All)
image2 (ILS enabled: portal => Manage All,
testUser => View)
When logged in as "testUser", I still see both the images on MyTab although image2 doesn't have view priv to testUser. My expected result is to see just image2 on the tab.
2) MyTab (portal => Manage All)
image1 (ILS enabled: portal => Manage All,
testUser => View)
image2 (ILS enabled: portal => Manage All)
When logged in as "testUser", I still see NO images on MyTab although image1 has view privs to testUser. I would expect to see image1 on the tab.
Question: In both the above cases, the tab privs seem to be dictating what the user sees regardless of what the item level privs are set to. Is this normal behavior or a bug? If a bug, is there a patch? Is there any way so that even after setting the tab privs, I still have finer control of what the user can access through item level privs?
If I don't put the items under a tab, then things work as expected.
thanks
Lalit Agarwal
Vienna, VA
703-521-5200 x3610

This is a known problem with the 9.0.2 release - fixed in 9.0.2.6.
Regards,
Jerry
PortalPM

Item level security not working when placed in a portlet page

I have three page links linking to separate pages and have two of them with item level security turned on for specific groups with view privilges. I have the access for those groups with view privilges in the page level as well. I have published that as portlet and placed the portlet in another page which has view priviliges for the groups specified in item level as well.
But I notice that when i place the portlet in a page, the item level security is not working.
Item Level Security Not Working for Items Placed on a page and published as portlet and placed in another page. Is there some work around for this.
Thanks
Valli

Would you please clarify for me? Is the problem that unauthorized people can see the portlet, or that unauthorized people can see the links?

Customized drill-down report cannot go to line item level (FGI4 and FGI1)

Hi Expert,
I created a customized drill-down report using New GL features, as follows:
FGI4 create form, with reference to form: 0SAPBLNCE-01
FGI1 create report for the form created.
After that I set some things like characteristic, variables, and output type.
When I execute the report, the data shown cannot be drill-down to line item level:
Goto > Line Item (this function is disabled).
Kindly advise why I cannot goto line item level, where I copy from standard form: 0SAPBLNCE-01, which ha sthe features of drill-down to line item level.
Thanks
sbmel

Hi sbmel,
For calling up a line item report in a drill down report you need to make the below settins:-
- You first have to generate the line item report with program RGRGENSI for your summary table.
- Then assign the generated line item report to the summary report.
Assiging the report is part of the 'Change drilldown report' function, which you reach by activating the characteristic selection field and then Extras -> Report assignment.
In the dialog box that appears, choose the 'Other report type' function and insert the line item report generated earlier, as an ABAP report
Regards,
Gaurav
Edited by: gka2707 on Jul 19, 2010 8:07 AM

Asset field blank in FS10N (Drilldown to line item level) report layout

Hi all,
i ahve posted a Retirement transaction to an asset and when i went to see the line item on the GL using/executing report FS10N for asset transactions GL and drill down to the line item level by double clicking on the period balances and I choose field "Asset" to be displayed in the layout, it is blank. How can I get report FS10N to display the asset number from the transaction?
the field is available in the layout but when i pull it into the report it is Blank in the report.
Any help would be appreciated. Thanks
Jay

Hello,
FS10N shows only balance, FBL3N shows the line details.
Add the asset as a special field via OBVU (Table: BSEG, Field: ANLN1).
Regards
Waza

Item level security...

We have an out of the box solution where users can log there meeting minutes in a custom list. The security of the site consists of about a 100 SharePoint groups which are being used throughout the site collection with different permissions.
For the purpose of this solution we have each group belonging to one of four logical roles (Directors, Power Users, Employees (Internal) and Employees (External). There are about 50 groups that fit the role of Employees. We want to make sure that users can
access only the items if they belong to this logical role. That means that an item created by employee has to be accessible by 50 groups.
What would be the best practice to apply security in this situation since for item level security it would require that inheritance be broken at item level and 50 groups added to the permissions of that item.
Regards

We are often discouraged from using folders, but security is one place they are quite useful. Create one folder for each of your top level groups (Directors, etc), break inheritance on the folder and assign your 50 groups. Upload a file to the folder and
all of the security you need has been applied. You general users don't need to know about the folders. Create view that "Show all items without folders". Keep one view with folders displayed for uploading files.
Mike Smith TechTrainingNotes.blogspot.com
Books:
SharePoint 2007 2010 Customization for the Site Owner,
SharePoint 2010 Security for the Site Owner

Custom filed at line item level in order.jsp

Hi,
I want to add a custom material number field at the line item level that will search for the item related to the customer material number and populate the order.jsp.
similar to the below mentioned Standard functionality:-
In order.jsp when we enter a valid item no in the item text box
and press enter then the related data of the item is populated in order.jsp.
Is this possible ??
If yes please let me know how can we achiese this.

Satish,
the problem with product search is that ....
custommaterial number will be mapped with the item number for different customers in a separate table. so if i place the searc in proucts search tab it will fetch form product master.
so I was think of extending the process flow and from jsp capture the value entered and trigger action from there make a item search following the standard process.
but my problem is that I am not able to capture the value entered in the custom field when refresh is clicked?
can you tell me how is the item search done when we enter the item number and press enter?
please suggest

Substitution and activated the same at the line item level in order to subs

I have created a substitution and activated the same at the line item level in order to substitute the ZRSPL (Payment Block) field by a constant value and a vendor invoice is posted using Transaction FB60. But the same is not working. When I post a vendor invoice using FB60, Payment Block field is being shown as blank instead of the constant value which I want to substitute.
>
> My prerequsite is mentioned below :
> BKPF-TCODE = 'FB60' AND BKPF-BUKRS = 'ABC' AND ( BKPF-BLART = 'KR' OR
> BKPF-BLART = 'KY' ) AND BSEG-DMBTR > '10000'

Hi,
I am not understanding the logic behind the prerequisites mentioned in your query.
Payment block field exists only for vendor related line item. However, you have not mentioned vendor reconciliation account in the prerequisites. It means, this substitution will trigger for all the line items which is wrong.
Or try following options.....
1) Substitution->Simulation
2) Extras->Expert Trace
Best Regards,
Madhu

Line Item Level Coupons

Hello Everyone,
Are line item level coupons available where you tie a promotion to a particular item? I know you can set it up where if you buy A01 you get A02 free, but is there a way to set that up as a 1-to-1 ratio? Let me explain a little further... Our client has end users placing orders through distributors, so the distributor is actually placing the order. The end users apply and receive a promotion code when they sign up and place their first order (which must be done through a distributor). The distributor may combine these orders from end users into one large order, therefore for each A01 that is on order, they give away a bag of items free (let's say A02), to that customer but they want to capture a note with that promotion that it is for a particular end user. So, the question is, is it possible to track that only one promotion is given per one item (for each A01 on the order only allow the same number of free A02). Also, is it possible for each promotion to add a note that will designate which end user it goes to? Any thoughts would be greatly appreciated.
Thank you in advance for your time!
Kristen

Hi Kristen,
Do you still need help on this one?
I am no completely clear on what you are after.
When you set up a discount(coupon) you can limit the number of times it can be redeemed per user. Is that what you are after? Or is there more to it?
There is no "note" associated with this. Not sure what you mean by that.

Line Item Level Partner Determination

Is it possible to determine line item level payee partner based on product.
Please advise

Hi Mike,
I have a similar requirement at my current client. Where you ever able to figure out a solution for this requirement, if you did could you please share the information how you guys did it.
Thanks
Shajeel

Fixed Value Date at line item level is not in changable mode when copied

Dear SDN Team,
Hi i have a problem in the Fixed Value date at the line item level in the Return sales order.
The Problem is When creating the return order with reference to the scheduling agreement (10.03.2010). In the Return sales Order at the line item level the fixed value date is coping from scheduling agreement item (fixed value date eg: 31.12.2009)
But i would like to have the fixed value date in the return order as 10.03.2010 but the field is greyed out.
But normally when the sales document is created with reference to the preceding document the same will be copied. But field is greyed out and it is not in changable mode.
Can any one help how to solve this.
I have checked also SAP Note where i did not find any messages.
In normal scenario - when the order is created without any reference the fixed value date is in changable mode until the document is in open.
Pleas help me to resolve this.
With Regards,
Jai

Hi Lakshmipathi,
I am sharing the resolution which was done to this requirement.
We have a specific condition type with statisticaly used and with routine to have KWERT with zero value,
Based on the different key combination. We have a specific key combination for the SA and SDoc and for this we need to maintain a condition record for the condition type with fixed value date and which will be linked to only the specific document. Once this is done.
We need to do update pricing in the sales order for the particular line item. by doing this the Fixed value date will be changed in the particular line item.
Thanks and Regards,
Jana

Summarized vs. Line Item Level Security

Similar Messages

Maybe you are looking for